Abstract
The (FeCoNi)86Ti7Al7 multi-principal-element alloy with a dual heterogeneous microstructure was successfully fabricated by selective laser melting, exhibiting an excellent combination of strength (ultimate tensile strength, 1085.2 ± 23.2 MPa) and ductility (30.5 ± 2.6%). It is evidenced that the joint effects of the hetero-deformation induced hardening from grains with heterogeneous geometrically necessary dislocations densities, in-situ formed B2 phase, and the coherent precipitation hardening from in-situ formed nano L12 phase were responsible for the strength. This work sheds light on the feasibility of simplifying the production of multi-mechanism strengthened alloys within one step and paves a new avenue to produce high-performance complex-shaped components.
GRAPHICAL ABSTRACT
![](/cms/asset/be5b64df-9a5e-4656-9704-12ab2a057be5/tmrl_a_2067790_uf0001_oc.jpg)
IMPACT STATEMENT
(FeCoNi)86Ti7Al7 multi-principal-element alloy exhibiting heterogeneity on the grains structure and in-situ precipitation was successfully fabricated by selective laser melting. It shows both good tensile strength and ductility.
Disclosure statement
No potential conflict of interest was reported by the author(s).
Data availability
The raw/processed data required to reproduce these findings cannot be shared at this time as the data also forms part of other ongoing studies.