![Sample our Physical Sciences journals, sign in here to start your FREE access for 14 days]({"type":"image" , "src" : "/sda/110819/TOC-Subject-Sample-2021-Physical-Sciences.jpg"})
Abstract
The effects of welding parameters on material consolidation are examined during friction stir butt welding of 2 mm Al 5083 alloy aluminium sheet with a surface cladding of Al 3025 alloy, which was co-cast from the melt. The influence of welding parameters on joint consolidation is investigated when tool revolutions per minute, travel speed and penetration depth were varied. It was found that modifying the pin of the welding tool to have a two-flat profile improves material consolidation and avoids defect formation during welding, and optimum welding parameters involve a combination of high tool rotation speed and travel speed. Optical and electron microscopy revealed that the integrity of the surface cladding layer could be maintained during friction stir welding while avoiding defect formation within the stir zone of the weld. The tensile strength of the joint was ∼58% of the base material due to softening within the stir zone.
Keywords:
Financial support was provided by the Natural Sciences and Engineering Research Council of Canada. The authors are grateful to F. Feng at Novelis for the helpful discussions and for providing the sheet material.
