Advanced search
Publication Cover
Science and Technology of Welding and Joining Volume 19, 2014 - Issue 1
Journal homepage
316
Views
8
CrossRef citations to date
0
Altmetric
Original Articles

Friction stir welding of co-cast aluminium clad sheet

J. FalluDepartment of Chemical and Materials Engineering, University of Alberta, Edmonton, Alta, Canada
,
H. IzadiDepartment of Chemical and Materials Engineering, University of Alberta, Edmonton, Alta, Canada
&
A. P. GerlichDepartment of Mechanical and Mechatronics Engineering, University of Waterloo, Waterloo, Ont., CanadaCorrespondence[email protected]
Pages 9-14 | Received 05 May 2013, Accepted 23 Jun 2013, Published online: 06 Dec 2013

References

  • Mishra, R. S. and Ma, Z. Y.: ‘Friction stir welding and processing’, Mater. Sci. Eng. R, 2005, R50, 1–78.
  • Nandan, R., DebRoy, T. and Bhadeshia, H. K. D. H.: ‘Recent advances in friction-stir welding—process, weldment structure and properties’, Prog. Mater. Sci., 2008, 53, 980–1023.
  • Threadgill, P. L., Leonard, A. J., Shercliff, H. R. and Withers, P. J.: ‘Friction stir welding of aluminum alloys’, Int. Mater. Rev., 2009, 54, (2), 49–93.
  • Nandan, R., Roy, G. G. and Debroy, T.: ‘Numerical simulation of three dimensional heat transfer and plastic flow during friction stir welding’, Metall. Mater. Trans. A, 2006, 37A, (4), 1247–1259.
  • da Silva, A. A. M., Arruti, E., Janeiro, G., Aldanondo, E., Alvarez, P. and Echeverria, A.: ‘Material flow and mechanical behaviour of dissimilar AA2024-T3 and AA7075-T6 aluminium alloys friction stir welds’, Mater. Des., 2011, 32, (4), 2021–2027.
  • Leal, R. M., Leitao, C., Loureiro, A., Rodrigues, D. M. and Vilaca, P.: ‘Material flow in heterogeneous friction stir welding of thin aluminium sheets: effect of shoulder geometry’, Mater. Sci. Eng. A, 2008, A498, (1–2), 384–391.
  • Zhao, Y. H., Lin, S. B., Qu, F. X. and Wu, L.: ‘Influence of pin geometry on material flow in friction stir welding process’, Mater. Sci. Technol., 2006, 22, (1), 45–50.
  • Foroozmehr, E., Esmaeili, S., Lloyd, D. J. and Gallerneault, M.: ‘Modeling of solutionizing and solute re-distribution in a co-cast bi-layer Al alloy system’, Metall. Mater. Trans. A, 2012, 43A, 1770–1780.
  • Izadi, H., Fallu, J., Abdel-Gwad, A., Liyanage, T. and Gerlich, A. P.: ‘Analysis of tool geometry in dissimilar Al alloy friction stir welds using optical microscopy and serial sectioning’, Sci. Technol. Weld. Join., 2013, 18, (4), 307–313.
  • Shukla, A. K. and Baeslack, W. A.: ‘Effect of process conditions on microstructure evolution and mechanical properties of friction stir welded thin sheet 2024-T3’, Proc. Int. Symp. on ‘Friction stir welding’, Saint Sauveur, Que., Canada, October 2006, TWI, Session 09A, Paper 43.
  • Karlsson, L., Berqvist, E. L. and Larsson, H.: ‘Application of friction stir welding to dissimilar welding’, Weld. World, 2002, 46, (1/2), 10–14.
  • Xiao, B. L., Wang, D., Bi, J. Zhang, Z. and Ma, Z. Y.: ‘Friction stir welding of SiCp/Al composite and 2024 Al alloy’, Mater. Sci. Forum, 2010, 638–642, 1500–1505.
  • Gerlich, P. Su., Yamamoto, M. and North, T. H.: ‘Material flow and intermixing during dissimilar friction stir welding’, Sci. Technol. Weld. Join., 2008, 13, (3), 254–264.
  • Colegrove, P. A. and Shercliff, H. R.: ‘CFD modelling of friction stir welding of thick plate 7449 aluminium alloy’, Sci. Technol. Weld. Join., 2006, 11, 429–441.
  • Su, P., Gerlich, A., North, T. H. and Bendzsak, G. J.: ‘Energy generation and stir zone dimensions in friction stir spot welds’, SAE Technical Paper 2006-01-0971, 2006.
  • Mahoney, M. W., Rhodes, C. G., Flintoff, J. G., Spurling, R. A. and Bingel, W. H.: ‘Properties of friction-stir-welded 7075 T651 aluminum’, Metall. Mater. Trans. A, 1998, 29A, 1955–1964.
  • Lin, S.-B., Yan-Hua, Z., Zi-Qiu, H. and Lin, W.: ‘Modeling of friction stir welding process for tools design’, Front. Mater. Sci., 2011, 5, (2), 236–245.
  • Kumar, K., Kailas, S. V. and Srivatsan, T. S.: ‘The role of tool design in influencing the mechanism for the formation of friction stir welds in aluminum alloy 7020’, Mater. Manuf. Processes, 2011, 26, (7), 915–921.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.