Advanced search
Publication Cover
Alexandria Journal of Medicine Volume 54, 2018 - Issue 4
Submit an article Journal homepage
5,372
Views
253
CrossRef citations to date
0
Altmetric
Review Articles

Additive manufacturing applications in medical cases: A literature based reviewFootnoteFootnote

Mohd. JavaidDepartment of Mechanical Engineering, Jamia Millia Islamia, New Delhi, IndiaCorrespondence[email protected]
&
Abid HaleemDepartment of Mechanical Engineering, Jamia Millia Islamia, New Delhi, India;[email protected]
Pages 411-422 | Received 22 Aug 2017, Accepted 24 Sep 2017, Published online: 17 May 2019

Citations (253)

Keep up to date with the latest research on this topic with citation updates for this article.

Subscribe to citation updates

Read on this site (8)

John Kechagias & Stephanos Zaoutsos. (2024) Effects of 3D-printing processing parameters on FFF parts’ porosity: outlook and trends. Materials and Manufacturing Processes 39:6, pages 804-814.
Read now
Ze Chen, Shubo Gao, Zhuohong Zeng, Yung Zhen Lek, Ming Gao, Zhongmin Xiao, Sastry Yagnanna Kandukuri & Kun Zhou. (2023) Heterogeneous microstructure and mechanical properties of Monel alloy parts repaired by laser directed energy deposition. Virtual and Physical Prototyping 18:1.
Read now
Kevin P Feltz, Lisa N MacFadden, Samuel D Gieg, Connor P Lough, Will A Bezold & Nathan WM Skelley. (2022) Mechanical Properties of 3D-Printed Orthopedic One-Third Tubular Plates and Cortical Screws. Journal of 3D Printing in Medicine 6:3, pages 129-145.
Read now
John Kechagias, D. Chaidas, N. Vidakis, K. Salonitis & N.M. Vaxevanidis. (2022) Key parameters controlling surface quality and dimensional accuracy: a critical review of FFF process. Materials and Manufacturing Processes 37:9, pages 963-984.
Read now
Ze Chen, Changjun Han, Ming Gao, Sastry Yagnanna Kandukuri & Kun Zhou. (2022) A review on qualification and certification for metal additive manufacturing. Virtual and Physical Prototyping 17:2, pages 382-405.
Read now
P.W. Anggoro, A.R. Tan Wijaya, T. Yuniarto, A.P. Bayuseno, J. Jamari, M. Tauviqirrahman & D.B. Setyohadi. (2021) Reverse engineering from 3D mesh to ceramic product in the form of miranda kerr tea for one teapot in PT doulton Indonesia. Cogent Engineering 8:1.
Read now
Asier Lores, Naiara Azurmendi, Iñigo Agote & Ester Zuza. (2019) A review on recent developments in binder jetting metal additive manufacturing: materials and process characteristics. Powder Metallurgy 62:5, pages 267-296.
Read now
Priyanshu Soni, Parnika Shrivastava & Sanjay Kumar Rai. Development of reduced volume endosseous cuspid tooth implant using topology optimization by SIMP technique for improved osseointegration. Computer Methods in Biomechanics and Biomedical Engineering 0:0, pages 1-15.
Read now

Articles from other publishers (245)

A. TAMILARASAN & A. RENUGAMBAL. (2024) ENHANCED SURFACE QUALITY AND STRENGTH OF FDMed SPECIMENS USING BBD AND BIO-INSPIRED ALGORITHMS. Surface Review and Letters.
Crossref
Mamta Juneja, Divya Bajaj, Niharika Thakur & Prashant Jindal. (2024) Reproduction of human dental models using different 3D printing techniques. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering.
Crossref
Jingzhong FangZidong Wang, Weibo Liu, Stanislao Lauria, Nianyin Zeng, Camilo Prieto, Fredrik Sikström & Xiaohui Liu. (2024) A New Particle Swarm Optimization Algorithm for Outlier Detection: Industrial Data Clustering in Wire Arc Additive Manufacturing. IEEE Transactions on Automation Science and Engineering 21:2, pages 1244-1257.
Crossref
Antonio Cañadilla, Gloria Rodríguez, Ana Romero, Miguel A. Caminero & Oscar J. Dura. (2024) Sustainable production of copper components using concentrated solar energy in material extrusion additive manufacturing (MEX-CSE). Sustainable Materials and Technologies 39, pages e00799.
Crossref
Elisabetta M. Zanetti, Gionata Fragomeni, Michela Sanguedolce, Giulia Pascoletti, Luigi De Napoli, Luigino Filice & Gerardo Catapano. (2024) Additive Manufacturing of Metal Load‐Bearing Implants 2: Surface Modification and Clinical Challenges . Chemie Ingenieur Technik 96:4, pages 502-512.
Crossref
Alexander Oleff, Benjamin Küster & Ludger Overmeyer. (2024) Determination of quality classes for material extrusion additive manufacturing using image processing. The International Journal of Advanced Manufacturing Technology.
Crossref
Henrik Barth, Amogh Vedantha Krishna, Vijeth Venkataram Reddy & Bengt-Göran Rosén. 2024. Innovation - Research and Development for Human, Economic and Institutional Growth. Innovation - Research and Development for Human, Economic and Institutional Growth.
Marinela Peto, Josué García-Ávila, Ciro A. Rodriguez, Héctor R. Siller, Jorge Vicente Lopes da Silva & Erick Ramírez-Cedillo. (2024) Review on structural optimization techniques for additively manufactured implantable medical devices. Frontiers in Mechanical Engineering 10.
Crossref
Sunjung Kim, Sai V. Yalla, Sagar Shetty & Noah J. Rosenblatt. (2024) Structural integrity of custom-designed additive manufactured prosthetic sockets compared to traditional sockets. Results in Materials 21, pages 100549.
Crossref
Jorge L. Amaya-Rivas, Bryan S. Perero, Carlos G. Helguero, Jorge L. Hurel, Juan M. Peralta, Francisca A. Flores & José D. Alvarado. (2024) Future trends of additive manufacturing in medical applications: An overview. Heliyon 10:5, pages e26641.
Crossref
Zia Ullah Arif, Muhammad Yasir Khalid, Ali Tariq, Mokarram Hossain & Rehan Umer. (2024) 3D printing of stimuli-responsive hydrogel materials: Literature review and emerging applications. Giant 17, pages 100209.
Crossref
Osman Ulkir & Gazi Akgun. (2024) Prediction of Flexural Strength with Fuzzy Logic Approach for Fused Deposition Modeling of Polyethylene Terephthalate Glycol Components. Journal of Materials Engineering and Performance.
Crossref
Muhammad Rizwan ul HaqAamer Nazir, Shang-Chih LinJeng-Ywan Jeng. (2024) Investigating the Effect of Design Parameters on the Mechanical Performance of Contact Wave Springs Designed for Additive Manufacturing. 3D Printing and Additive Manufacturing 11:1, pages 94-114.
Crossref
Muhammad Yasir Khalid, Zia Ullah Arif, Ali Tariq, Mokarram Hossain, Kamran Ahmed Khan & Rehan Umer. (2024) 3D printing of magneto-active smart materials for advanced actuators and soft robotics applications. European Polymer Journal 205, pages 112718.
Crossref
Or Haim Anidjar, Ro’i Lang & Mor Mega. (2024) Transfer Learning Methods for Fractographic Detection of Fatigue Crack Initiation in Additive Manufacturing. IEEE Access 12, pages 6262-6280.
Crossref
Chinmaya Sahoo, Aditya Ranjan, Gyana Ranjan Sahoo, Devjyoti Tiwary, Abhay Pratap Singh, Amlana Panda, Ramanuj Kumar & Ashok Kumar Sahoo. Impact of additive manufacturing in the health-care industry : A review status. Impact of additive manufacturing in the health-care industry : A review status.
Michaela Servi, Elisa Mussi & Yary Volpe. (2024) Comparative evaluation of low-cost 3D scanning devices for ear acquisition. Computer Methods and Programs in Biomedicine Update 5, pages 100135.
Crossref
Devika T. Biju, Rosita Kurian, Sherly Antony & R.S. Soumya. 2024. Medical Additive Manufacturing. Medical Additive Manufacturing 363 380 .
N. Dhoonooah, K. Moussaoui, F. Monies, W. Rubio & R. Zitoune. 2024. Additive Manufacturing of Bio-implants. Additive Manufacturing of Bio-implants 1 31 .
D. Narsimhachary & M. Kalyan Phani. 2024. Practical Implementations of Additive Manufacturing Technologies. Practical Implementations of Additive Manufacturing Technologies 295 308 .
Elisa Mussi, Michaela Servi & Flavio Facchini. 2024. Design Tools and Methods in Industrial Engineering III. Design Tools and Methods in Industrial Engineering III 121 128 .
M. Frija, A. Toumi & M. Khodja. 2024. Advances in Additive Manufacturing: Materials, Processes and Applications. Advances in Additive Manufacturing: Materials, Processes and Applications 70 79 .
Sebastian Wesselmecking, Marc Ackermann, Charline Blankart, Jing Wang, Frederike Brasche, Tobias Plum, Siyuan Qin, Felix Pütz, Sebastian Münstermann, Christoph Broeckmann, Gerhard Hirt & Ulrich Krupp. 2024. Internet of Production. Internet of Production 171 186 .
Ravinder Kumar, Rayan Abdul Gafoor, Pallav Rajkhowa, Chirag Chandrayes Shetty, Shubham Sharma, Shashi Prakash Dwivedi, Abhinav Kumar & Mohamed Abbas. (2023) Design, modelling and simulation of biocompatible poly methyl methacrylate polymer-based inside-mouth support for microphone using finite element analysis in ANSYS workbench software. International Journal on Interactive Design and Manufacturing (IJIDeM).
Crossref
Sudipto Datta, Ranjit Barua & Arbind Prasad. 2023. Advanced Materials and Manufacturing Techniques for Biomedical Applications. Advanced Materials and Manufacturing Techniques for Biomedical Applications 411 427 .
M. Francis Luther King, G. Robert Singh, A. Gopichand & V. Srinivasan. 2023. Advanced Materials and Manufacturing Techniques for Biomedical Applications. Advanced Materials and Manufacturing Techniques for Biomedical Applications 345 381 .
Mohd Javaid, Shahbaz Khan, Abid Haleem & Shanay Rab. (2022) Adoption of modern technologies for implementing industry 4.0: an integrated MCDM approach. Benchmarking: An International Journal 30:10, pages 3753-3790.
Crossref
A. Captan Prabakaran, P. Senthil & T. Sathies. (2023) Experimental and numerical investigations on the fatigue characteristics of FFF-printed acrylonitrile styrene acrylate parts. Progress in Additive Manufacturing 8:6, pages 1653-1664.
Crossref
Haolin Zhang, Chaitanya Krishna Prasad Vallabh & Xiayun Zhao. (2023) Machine learning enhanced high dynamic range fringe projection profilometry for in-situ layer-wise surface topography measurement during LPBF additive manufacturing. Precision Engineering 84, pages 1-14.
Crossref
Kunlong Zhao, Zhenhua Su, Zhijie Ye, Wenxin Cao, Jinzhuo Pang, Xiaolei Wang, Zhuochao Wang, Xingchun Xu & Jiaqi Zhu. (2023) Review of the types, formation mechanisms, effects, and elimination methods of binder jetting 3D-printing defects. Journal of Materials Research and Technology 27, pages 5449-5469.
Crossref
Ali Tariq, Zia Ullah Arif, Muhammad Yasir Khalid, Mokarram Hossain, Peerzada Ifham Rasool, Rehan Umer & Seeram Ramakrishna. (2023) Recent Advances in the Additive Manufacturing of Stimuli‐Responsive Soft Polymers. Advanced Engineering Materials 25:21.
Crossref
Haolin Zhang, Chaitanya Krishna Prasad Vallabh & Xiayun Zhao. (2023) Influence of spattering on in-process layer surface roughness during laser powder bed fusion. Journal of Manufacturing Processes 104, pages 289-306.
Crossref
Unissa Nichul, Sameer Warghane, Pawan Kumar, Pankaj Verma, Rajesh Khatirkar & Vijay Hiwarkar. (2022) Evolution of equiaxed α/β microstructure of annealed SLM-built Ti64: role of TiB2. Progress in Additive Manufacturing 8:5, pages 907-918.
Crossref
Ali Imran Ansari, Nazir Ahmad Sheikh & Navin Kumar. (2023) Simulation and experimental energy absorption behavior of ABS-M30i-based three distinct lattice structures fabricated by polymer 3D printer. Journal of the Brazilian Society of Mechanical Sciences and Engineering 45:10.
Crossref
Ali Imran Ansari, Nazir Ahmad Sheikh & Navin Kumar. (2023) Energy-Absorbing Characteristics of an ABS-M30i-based 3D-Printed Periodic Surface and Strut-Based Lattice Structure. Journal of The Institution of Engineers (India): Series C 104:5, pages 989-1004.
Crossref
Gaurav Prashar, Hitesh Vasudev & Dharam Bhuddhi. (2022) Additive manufacturing: expanding 3D printing horizon in industry 4.0. International Journal on Interactive Design and Manufacturing (IJIDeM) 17:5, pages 2221-2235.
Crossref
Sumodh Kumar, M. R. Ramesh, P. Jeyaraj, Satvasheel Powar & Mrityunjay Doddamani. (2023) Buckling behavior of non‐uniformly heated 3D printed plain and functionally graded nanocomposites . Polymer Composites 44:9, pages 5450-5463.
Crossref
Tsabita Fidinillah, Ayu Gareta Risangtuni, Narendra Kurnia Putra, Vani Virdyawan, Suprijanto Suprijanto & Syam Mega Putri. (2023) Design of Soft Pneumatic Actuator in Hand Rehabilitation Robot with FEM-Based Modeling. Design of Soft Pneumatic Actuator in Hand Rehabilitation Robot with FEM-Based Modeling.
Shambhu Kumar Manjhi, Prithivirajan Sekar, Srikanth Bontha & A. S. S. Balan. (2023) Effect of CMT-WAAM Process Parameters on Bead Geometry, Microstructure and Mechanical Properties of AZ31 Mg Alloy. Journal of Materials Engineering and Performance.
Crossref
Swati Chaudhary, Sarvesh Kumar Avinashi, Jitendra Rao & Chandkiram Gautam. (2023) Recent Advances in Additive Manufacturing, Applications and Challenges for Dentistry: A Review. ACS Biomaterials Science & Engineering 9:7, pages 3987-4019.
Crossref
Nagarjun J. (2023) Revalorisation of tamarind seed waste for improved PLA wear and hydrophilic behaviour in 3D printing applications. Biomass Conversion and Biorefinery.
Crossref
Santosh Kumar & Rakesh Kumar. (2023) Overview of 3D and 4D Printing Techniques and their Emerging Applications in Medical Sectors. Current Materials Science 16:2, pages 143-170.
Crossref
Silvia Badini, Stefano Regondi, Emanuele Frontoni & Raffaele Pugliese. (2023) Assessing the capabilities of ChatGPT to improve additive manufacturing troubleshooting. Advanced Industrial and Engineering Polymer Research 6:3, pages 278-287.
Crossref
Ali Imran Ansari & Nazir Ahmad Sheikh. (2023) Simulation and Experimental Assesment of acrylonitrile butadiene styrene polymer based new lattice design. Journal of The Institution of Engineers (India): Series C 104:3, pages 593-604.
Crossref
Ashwini Patil, Davidson Jebaseelan D, Daniel Bomze & Vasanth Gopal. (2023) Wear behaviour of lithography ceramic manufactured dental zirconia. BMC Oral Health 23:1.
Crossref
Zia Ullah Arif, Muhammad Yasir Khalid, Reza Noroozi, Mokarram Hossain, HaoTian Harvey Shi, Ali Tariq, Seeram Ramakrishna & Rehan Umer. (2023) Additive manufacturing of sustainable biomaterials for biomedical applications. Asian Journal of Pharmaceutical Sciences 18:3, pages 100812.
Crossref
Mathias Sæterbø & Wei Deng Solvang. (2023) A Readiness Model for Facilitating the Implementation of Metal Additive Manufacturing at SMEs. A Readiness Model for Facilitating the Implementation of Metal Additive Manufacturing at SMEs.
Thinh Quy Duc Pham, Truong Vinh Hoang, Xuan Van Tran, Quoc Tuan Pham, Seifallah Fetni, Laurent Duchêne, Hoang Son Tran & Anne-Marie Habraken. (2022) Fast and accurate prediction of temperature evolutions in additive manufacturing process using deep learning. Journal of Intelligent Manufacturing 34:4, pages 1701-1719.
Crossref
Stephan Schuschnigg, Margarete Hufnagl, Clemens Holzer, Florian Eder, Edwin Kroke, Stefan Schallmeiner, Christoph Regula, Yaser Hamedi, Christian Gorsche, Elena Morganti & Konstanze Seidler. (2022) Novel Additive Manufacturing Materials for Waste Heat Deduction. Advanced Engineering Materials 25:7.
Crossref
Lukas Hentschel, Sandra Petersmann, Joamin Gonzalez-Gutierrez, Frank Kynast, Ute Schäfer, Florian Arbeiter & Clemens Holzer. (2022) Parameter Optimization of the ARBURG Plastic Freeforming Process by Means of a Design of Experiments Approach. Advanced Engineering Materials 25:7.
Crossref
Olga V. Romanovskaya & Georgy B. Romanovskiy. (2023) Legal regulation of additive technologies in modern biomedicine. RUDN Journal of Law 27:1, pages 21-40.
Crossref
Syed Farhan Raza, Muhammad Amjad, Kashif Ishfaq, Shafiq Ahmad & Mali Abdollahian. (2023) Effect of Three-Dimensional (3D) Scanning Factors on Minimizing the Scanning Errors Using a White LED Light 3D Scanner. Applied Sciences 13:5, pages 3303.
Crossref
Ilma Tasneem, Aleena Ariz, Devyani Bharti, Abid Haleem, Mohd Javaid & Shashi Bahl. (2021) 3D Printing Technology and its Significant Applications in the Context of Healthcare Education. Journal of Industrial Integration and Management 08:01, pages 113-130.
Crossref
Md Maruf Hossan Chowdhury, Moira Scerri, Sajib Shahriar & Katrina Skellern. (2023) Digital transformation of supply chain: a study on additive manufacturing practice in medical device in Australia. Journal of Enterprise Information Management.
Crossref
Mohd Javaid, Abid Haleem, Ravi Pratap Singh & Rajiv Suman. (2023) Sustaining the healthcare systems through the conceptual of biomedical engineering: A study with recent and future potentials. Biomedical Technology 1, pages 39-47.
Crossref
Kyle C. H. Chin, Jianxun Cui, Robert M. O’Dea, Thomas H. EppsIIIIII & Andrew J. Boydston. (2023) Vat 3D Printing of Bioderivable Photoresins – Toward Sustainable and Robust Thermoplastic Parts. ACS Sustainable Chemistry & Engineering 11:5, pages 1867-1874.
Crossref
Zackary Snow, Christine Cummings, Edward W. Reutzel, Abdalla Nassar, Kyle Abbot, Paul Guerrier, Shawn Kelly, Simon McKown, Jared Blecher & Ryan Overdorff. (2023) Analysis of factors affecting fatigue performance of HIP'd laser-based powder bed fusion Ti–6Al–4V coupons. Materials Science and Engineering: A 864, pages 144575.
Crossref
Mehran Khajehmohammadi, Roohollah Azizi Tafti & Habib Nikukar. (2022) Effect of porosity on mechanical and biological properties of bioprinted scaffolds. Journal of Biomedical Materials Research Part A 111:2, pages 245-260.
Crossref
Virendra Kumar Verma, Sachin S. Kamble & L. Ganapathy. (2022) 3D-printed medical models supply chain: barriers modeling and analysis. Rapid Prototyping Journal 29:2, pages 288-311.
Crossref
Vidhi Mathur, Prachi Agarwal, Varadharajan Srinivasan, Amit Panwar & Kirthanashri S. Vasanthan. (2022) Facet of 4D printing in biomedicine. Journal of Materials Research 38:1, pages 2-18.
Crossref
Virendra Kumar Verma, Sachin S. Kamble, L. Ganapathy & Pradeep Kumar Tarei. (2022) Overcoming the post-processing barriers for 3D-printed medical models. Rapid Prototyping Journal 29:1, pages 33-49.
Crossref
Silvana Gallinaro. 2023. Advances in 3D Printing [Working Title]. Advances in 3D Printing [Working Title].
Gabriel Avelino R. Sampedro, Made Adi Paramartha Putra & Mideth Abisado. (2023) 3D-AmplifAI: An Ensemble Machine Learning Approach to Digital Twin Fault Monitoring for Additive Manufacturing in Smart Factories. IEEE Access 11, pages 64128-64140.
Crossref
Iffa Mohd Arrif, Solehuddin Shuib, Mohd Afzan Mohd Anuar, Amran Ahmed Shokri, Bidyut Pal & Izhar Aziz. Design and finite element analysis of total knee replacement (TKR) for additive manufacturing. Design and finite element analysis of total knee replacement (TKR) for additive manufacturing.
Arvind Chandramowliswaran, Jayanth Kumar & Karthik Prasad. Application of machine learning based classification algorithms in additive manufacturing - A review. Application of machine learning based classification algorithms in additive manufacturing - A review.
Kekeletso Thejane, Willie du Preez & Gerrie Booysen. (2023) Implementing digital twinning in an additive manufacturing process chain. MATEC Web of Conferences 388, pages 10001.
Crossref
Manu Srivastava, Sandeep Rathee, Ankit Tiwari & Mehul Dongre. (2023) Wire arc additive manufacturing of metals: A review on processes, materials and their behaviour. Materials Chemistry and Physics 294, pages 126988.
Crossref
Maxwell Hein, Nelson Filipe Lopes Dias, David Kokalj, Dominic Stangier, Kay-Peter Hoyer, Wolfgang Tillmann & Mirko Schaper. (2023) On the influence of physical vapor deposited thin coatings on the low-cycle fatigue behavior of additively processed Ti-6Al-7Nb alloy. International Journal of Fatigue 166, pages 107235.
Crossref
Vineet Jain, Puneeta Ajmera, Sheetal Kalra & Sheetal Yadav. 2023. Advances in Additive Manufacturing Artificial Intelligence, Nature-Inspired, and Biomanufacturing. Advances in Additive Manufacturing Artificial Intelligence, Nature-Inspired, and Biomanufacturing 27 41 .
Sonia Cárdenas-Delgado, Chariguamán Quinteros Magali Fernanda, Pilca Imba Wilmer Patricio & Mauricio Loachamín-Valencia. 2023. Proceedings of Eighth International Congress on Information and Communication Technology. Proceedings of Eighth International Congress on Information and Communication Technology 61 71 .
Xiaoming Li. 2023. Languages and Compilers for Parallel Computing. Languages and Compilers for Parallel Computing 157 167 .
Matthew N. O. Sadiku, Abayomi J. Ajayi-Majebi & Philip O. AdeboMatthew N. O. Sadiku, Abayomi J. Ajayi-Majebi & Philip O. Adebo. 2023. Emerging Technologies in Manufacturing. Emerging Technologies in Manufacturing 109 121 .
Sebastian Wesselmecking, Marc Ackermann, Charline Blankart, Jing Wang, Frederike Brasche, Tobias Plum, Siyuan Qin, Felix Pütz, Sebastian Münstermann, Christoph Broeckmann, Gerhard Hirt & Krupp Ulrich. 2023. Internet of Production. Internet of Production 1 16 .
Erin B. Curry, Kaitlin C. Lyszak, Donal Sheets, Lauren M. Gorman, Rainer J. Hebert & Jason N. Hancock. (2022) Broadband infrared confocal imaging for applications in additive manufacturing. Review of Scientific Instruments 93:12.
Crossref
Ze Chen, Chengcheng Wang, Chao Tang, Yung Zhen Lek, Sastry Yagnanna Kandukuri, Hejun Du, Huajian Gao & Kun Zhou. (2022) Microstructure and mechanical properties of a Monel K-500 alloy fabricated by directed energy deposition. Materials Science and Engineering: A 857, pages 144113.
Crossref
Abrar Malik, Saquib Rouf, Mir Irfan Ul Haq, Ankush Raina, Ana Pilar Valerga Puerta, Binnur Sagbas & Alessandro Ruggiero. (2022) Tribo-corrosive behavior of additive manufactured parts for orthopaedic applications. Journal of Orthopaedics 34, pages 49-60.
Crossref
Samarjeet Singh Siwal, Kirti Mishra, Adesh Kumar Saini, Walaa Fahad Alsanie, Adriana Kovalcik & Vijay Kumar Thakur. (2022) Additive manufacturing of bio-based hydrogel composites: recent advances. Journal of Polymers and the Environment 30:11, pages 4501-4516.
Crossref
Ali Imran Ansari & Nazir Ahmad Sheikh. (2022) Bone Tissue Regeneration: Rapid Prototyping Technology in Scaffold Design. Journal of The Institution of Engineers (India): Series C 103:5, pages 1303-1324.
Crossref
Shrutika Sharma, Vishal Gupta & Deepa Mudgal. (2022) Current trends, applications, and challenges of coatings on additive manufacturing based biopolymers: A state of art review. Polymer Composites 43:10, pages 6749-6781.
Crossref
Amged El Hassan, Waleed Ahmed & Essam Zaneldin. (2022) Investigating the Impact of Inclusions on the Behavior of 3D-Printed Composite Sandwich Beams. Buildings 12:9, pages 1448.
Crossref
M. Hemachandra, Shivraman Thapliyal & Kumar Adepu. (2022) A review on microstructural and tribological performance of additively manufactured parts. Journal of Materials Science 57:36, pages 17139-17161.
Crossref
A. V. Sinegub, V. A. Suvorov, D. V. Gavrilov & M. R. Bahrami. (2022) Comparative Analysis of the Stress–Strain State of a Lightweight 3D-Printed Shoulder Implant. Biomedical Engineering 56:3, pages 194-197.
Crossref
Maxwell Hein. (2022) Influence of Physical Vapor Deposition on High-Cycle Fatigue Performance of Additively Manufactured Ti-6Al-7Nb Alloy. Crystals 12:9, pages 1190.
Crossref
Sophie A. Lekas, Ross Drummond, Patrick S. Grant & Stephen R. Duncan. (2022) Closed-loop control of dielectric permittivity for 3D-printed radio-frequency devices. Closed-loop control of dielectric permittivity for 3D-printed radio-frequency devices.
Sebastian Loewner, Sebastian Heene, Timo Baroth, Henrik Heymann, Fabian Cholewa, Holger Blume & Cornelia Blume. (2022) Recent advances in melt electro writing for tissue engineering for 3D printing of microporous scaffolds for tissue engineering. Frontiers in Bioengineering and Biotechnology 10.
Crossref
Ching Hang Bob Yung, Lung Fung Tse, Wing Fung Edmond Yau & Sze Yi Mak. 2022. Advanced Additive Manufacturing. Advanced Additive Manufacturing.
Johannes Gurke, Tobias E. Naegele, Sam Hilton, Roberto Pezone, Vincenzo F. Curto, Damiano G. Barone, Emil J. W. List-Kratochvil, Alejandro Carnicer-Lombarte & George G. Malliaras. (2022) Hybrid fabrication of multimodal intracranial implants for electrophysiology and local drug delivery. Materials Horizons 9:6, pages 1727-1734.
Crossref
Abid Haleem, Mohd Javaid, Abhishek Goyal & Tarbiya Khanam. (2020) Redesign of Car Body by Reverse Engineering Technique using Steinbichler 3D Scanner and Projet 3D Printer. Journal of Industrial Integration and Management 07:02, pages 171-182.
Crossref
Paweł Turek, Damian Filip, Łukasz Przeszłowski, Artur Łazorko, Grzegorz Budzik, Sławomir Snela, Mariusz Oleksy, Jarosław Jabłoński, Jarosław Sęp, Katarzyna Bulanda, Sławomir Wolski & Andrzej Paszkiewicz. (2022) Manufacturing Polymer Model of Anatomical Structures with Increased Accuracy Using CAx and AM Systems for Planning Orthopedic Procedures. Polymers 14:11, pages 2236.
Crossref
Kübra SIVACI, Elif Ecem ÖZGÜVENÇ & Yahya BOZKURT. (2022) BİYOMEDİKAL UYGULAMALARINDA EKLEMELİ İMALAT TEKNOLOJİLERİ. Uludağ University Journal of The Faculty of Engineering, pages 503-522.
Crossref
Yingchao Zhao, Zhen Wang, Jingzhou Zhao, Mubashir Hussain & Maonan Wang. (2022) Additive Manufacturing in Orthopedics: A Review. ACS Biomaterials Science & Engineering 8:4, pages 1367-1380.
Crossref
Manu Srivastava & Sandeep Rathee. (2021) Additive manufacturing: recent trends, applications and future outlooks. Progress in Additive Manufacturing 7:2, pages 261-287.
Crossref
Panagiotis Karayannis, Stratos Saliakas, Ioannis Kokkinopoulos, Spyridon Damilos, Elias P. Koumoulos, Eleni Gkartzou, Julio Gomez & Constantinos Charitidis. (2022) Facilitating Safe FFF 3D Printing: A Prototype Material Case Study. Sustainability 14:5, pages 3046.
Crossref
Haolin Zhang, Chaitanya Krishna Prasad Vallabh, Yubo Xiong & Xiayun Zhao. (2022) A systematic study and framework of fringe projection profilometry with improved measurement performance for in-situ LPBF process monitoring. Measurement 191, pages 110796.
Crossref
Mir Irfan Ul Haq, Suhail Khuroo, Ankush Raina, Sabiyata Khajuria, Mohd Javaid, Mir Farhan Ul Haq & Abid Haleem. (2020) 3D printing for development of medical equipment amidst coronavirus (COVID-19) pandemic—review and advancements. Research on Biomedical Engineering 38:1, pages 305-315.
Crossref
Grzegorz Budzik, Krzysztof Tomaszewski & Andrzej Soboń. (2022) Opportunities for the Application of 3D Printing in the Critical Infrastructure System. Energies 15:5, pages 1656.
Crossref
Thomas A. Burge, Jonathan R. T. Jeffers & Connor W. Myant. (2022) Development of an Automated Mass-Customization Pipeline for Knee Replacement Surgery Using Biplanar X-Rays. Journal of Mechanical Design 144:2.
Crossref
Seungjong Lee, Nabeel Ahmad, Kayla Corriveau, Cameron Himel, Daniel F. Silva & Nima Shamsaei. (2022) Bending properties of additively manufactured commercially pure titanium (CPTi) limited contact dynamic compression plate (LC-DCP) constructs: Effect of surface treatment. Journal of the Mechanical Behavior of Biomedical Materials 126, pages 105042.
Crossref
Osama Ali Hindy, Meric Goker & Pinar Yilgor Huri. (2022) Nanoscale agents within 3D-printed constructs: intersection of nanotechnology and personalized bone tissue engineering. Emergent Materials 5:1, pages 195-205.
Crossref
S. Logesh & S. Vinodh. (2021) TISM-based analysis of important factors for additive manufacturing in healthcare:a case study. Rapid Prototyping Journal 28:2, pages 268-284.
Crossref
Dominika Grygier, Maciej Kujawa & Piotr Kowalewski. (2022) Deposition of Biocompatible Polymers by 3D Printing (FDM) on Titanium Alloy. Polymers 14:2, pages 235.
Crossref
Paweł Turek. (2022) The Influence of the Layer Thickness Change on the Accuracy of the Zygomatic Bone Geometry Manufactured Using the FDM Technology. The Influence of the Layer Thickness Change on the Accuracy of the Zygomatic Bone Geometry Manufactured Using the FDM Technology.
Yazan Fakhoury, Abdallah A. Ellabban, Usama Attia, Ahmed Sallam & Samer Elsherbiny. (2022) Three-dimensional printing in ophthalmology and eye care: current applications and future developments. Therapeutic Advances in Ophthalmology 14, pages 251584142211066.
Crossref
C. T. Muthiah, C. Arvind, C. Devanthan & R. Giri. Application of machine learning in fused deposition modeling: A review. Application of machine learning in fused deposition modeling: A review.
Ning Li, Jean-Michel Hugo, Damien Serret, Yicha Zhang & Samuel Gomes. (2022) A two-step parametric generative method for heat exchangers design in additive manufacturing. Procedia CIRP 109, pages 508-512.
Crossref
Priya Bansal, Deepti Katiyar, Surya Prakash, N.G. Raghavendra Rao, Vidhu Saxena, Vinay Kumar & Abhishek Kumar. (2022) Applications of some biopolymeric materials as medical implants: An overview. Materials Today: Proceedings 65, pages 3377-3381.
Crossref
Saba Anas, Mohd Yunus Khan, Mohammad Rafey & Kashif Faheem. (2022) Concept of 5D printing technology and its applicability in the healthcare industry. Materials Today: Proceedings 56, pages 1726-1732.
Crossref
Samith Hettiarachchi, Gehan Melroy, Amith Mudugamuwa, Nisal Perera, Peshan Sampath & Ranjith Amarasinghe. 2022. Sustainable Design and Manufacturing. Sustainable Design and Manufacturing 235 244 .
Rakesh Chaudhari, Praveen Kumar Loharkar & Asha Ingle. 2022. Recent Advances in Industrial Production. Recent Advances in Industrial Production 241 250 .
Gianni Pecorini, Federica Chiellini & Dario Puppi. 2022. Biomimetic Biomaterials for Tissue Regeneration and Drug Delivery. Biomimetic Biomaterials for Tissue Regeneration and Drug Delivery 99 148 .
Tamanna Bhuyan, Surjendu Maity, Devi Rupa Saha, Nayan Mani Das & Dipankar Bandyopadhyay. 2022. Advanced Micro- and Nano-manufacturing Technologies. Advanced Micro- and Nano-manufacturing Technologies 29 56 .
Aman Agrawal, Sunil Bhawnani, Anmol Sharma, Ankush Raina & Mir Irfan Ul Haq. 2022. Advances in Mechanical and Materials Technology. Advances in Mechanical and Materials Technology 673 681 .
Mirco Peron, Fabio Sgarbossa, Dmitry Ivanov & Alexandre Dolgui. 2022. Supply Network Dynamics and Control. Supply Network Dynamics and Control 121 146 .
Damir Godec, Tomislav Breški, Miodrag Katalenić, Axel Nordin, Olaf Diegel, Per Kristav, Damien Motte & Jože Tavčar. 2022. A Guide to Additive Manufacturing. A Guide to Additive Manufacturing 149 229 .
Paz Morer-Camo, Jacobo Paredes-Puente, Marcos Llorente-Ortega & Xabier Unamuno-Iñurritegui. 2022. Advances in Design Engineering II. Advances in Design Engineering II 182 190 .
Evgenii Borisov, Anna Gracheva, Vera Popovich & Anatoly Popovich. 2022. TMS 2022 151st Annual Meeting & Exhibition Supplemental Proceedings. TMS 2022 151st Annual Meeting & Exhibition Supplemental Proceedings 298 303 .
R. Ruban, V. S. Rajashekhar, B. Nivedha, H. Mohit, M. R. Sanjay & Suchart Siengchin. 2022. Innovations in Additive Manufacturing. Innovations in Additive Manufacturing 139 157 .
Ajit BeheraAjit Behera. 2022. Advanced Materials. Advanced Materials 667 700 .
G. Nyiranzeyimana, J.M. Mutua, B.R. Mose & T.O. Mbuya. (2022) A grey‐based Taguchi method to optimize fused deposition modelling process parameters for manufacture of a hip joint implant. Materialwissenschaft und Werkstofftechnik 53:1, pages 89-108.
Crossref
Giri Ratnakar Gubbala & Ramu Inala. (2021) Design and development of patient-specific prosthetic socket for lower limb amputation. Material Science, Engineering and Applications 1:2, pages 32-42.
Crossref
Ralf D. Fischer, Jan Klasen, Andrii Shmatok & Barton C. Prorok. (2021) An additively manufactured locking fixation system for potential application in patient-specific implants. Journal of the Mechanical Behavior of Biomedical Materials 124, pages 104867.
Crossref
Lalit Kumar, Abid Haleem & Mohd. Javaid. (2021) Impact of three dimensional printing in orthopedics. Global Health Journal 5:4, pages 178-182.
Crossref
Sastry Kandukuri & Chen Ze. (2021) Progress of Metal AM and Certification Pathway. Transactions of the Indian National Academy of Engineering 6:4, pages 909-915.
Crossref
Alexander Oleff, Benjamin Küster, Malte Stonis & Ludger Overmeyer. (2021) Process monitoring for material extrusion additive manufacturing: a state-of-the-art review. Progress in Additive Manufacturing 6:4, pages 705-730.
Crossref
Paweł Turek, Paweł Pakla, Grzegorz Budzik, Bogumił Lewandowski, Łukasz Przeszłowski, Tomasz Dziubek, Sławomir Wolski & Jan Frańczak. (2021) Procedure Increasing the Accuracy of Modelling and the Manufacturing of Surgical Templates with the Use of 3D Printing Techniques, Applied in Planning the Procedures of Reconstruction of the Mandible. Journal of Clinical Medicine 10:23, pages 5525.
Crossref
Iván La Fé-Perdomo, Jorge Andres Ramos-Grez, Gerardo Beruvides & Rafael Alberto Mujica. (2021) Selective laser melting: lessons from medical devices industry and other applications. Rapid Prototyping Journal 27:10, pages 1801-1830.
Crossref
Y W Adugna, A D Akessa & H G Lemu. (2021) Overview study on challenges of additive manufacturing for a healthcare application. IOP Conference Series: Materials Science and Engineering 1201:1, pages 012041.
Crossref
Nan Yang, Yifan Song, Jinlun Huang, Yuetao Chen & Ian Maskery. (2021) Combinational design of heterogeneous lattices with hybrid region stiffness tuning for additive manufacturing. Materials & Design 209, pages 109955.
Crossref
Chukwuzubelu Okenwa Ufodike, Mohammad Faisal Ahmed & Grzegorz Dolzyk. (2021) Additively manufactured biomorphic cellular structures inspired by wood microstructure. Journal of the Mechanical Behavior of Biomedical Materials 123, pages 104729.
Crossref
Arivazhagan Pugalendhi & Rajesh Ranganathan. (2021) A review of additive manufacturing applications in ophthalmology. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine 235:10, pages 1146-1162.
Crossref
Mohd Javaid, Abid Haleem, Ravi Pratap Singh, Rajiv Suman & Shanay Rab. (2021) Role of additive manufacturing applications towards environmental sustainability. Advanced Industrial and Engineering Polymer Research 4:4, pages 312-322.
Crossref
Imtiaz Qavi & George Z. Tan. (2021) Near-field electrospinning polycaprolactone microfibers to mimic arteriole-capillary–venule structure. Progress in Biomaterials 10:3, pages 223-233.
Crossref
Ziyin Xiang, Van‐Cuong Nguyen, Benjamin Ducharne, Nellie Della Schiava, Jean‐Fabien Capsal, Pierre‐Jean Cottinet & Minh‐Quyen Le. (2021) 3D Printing of Flexible Composites via Magnetophoresis: Toward Medical Application Based on Low‐Frequency Induction Heating Effect. Macromolecular Materials and Engineering 306:9.
Crossref
G Waghmare, S Bagde & Sabir Khan. (2021) Design and Development of Modular Arm Cast Using Additive Manufacturing. IOP Conference Series: Materials Science and Engineering 1170:1, pages 012014.
Crossref
Bonthu Dileep & Mrityunjay Doddamani. (2021) Compressive response of 3D printed graded foams. Composites Part C: Open Access, pages 100181.
Crossref
Md. Sarower Tareq, Tanzilur Rahman, Mokarram Hossain & Peter Dorrington. (2021) Additive manufacturing and the COVID-19 challenges: An in-depth study. Journal of Manufacturing Systems 60, pages 787-798.
Crossref
Piyush Patel & Piyush Gohil. (2021) Role of additive manufacturing in medical application COVID-19 scenario: India case study. Journal of Manufacturing Systems 60, pages 811-822.
Crossref
M.G.E. Oldhoff, M.J. Mirzaali, N. Tümer, J. Zhou & A.A. Zadpoor. (2021) Comparison in clinical performance of surgical guides for mandibular surgery and temporomandibular joint implants fabricated by additive manufacturing techniques. Journal of the Mechanical Behavior of Biomedical Materials 119, pages 104512.
Crossref
Veeraraghavan Sundar, Zackary Snow, Jayme Keist, Griffin Jones, Rachel Reed & Edward Reutzel. (2021) Flaw Identification in Additively Manufactured Parts Using X-ray Computed Tomography and Destructive Serial Sectioning. Journal of Materials Engineering and Performance 30:7, pages 4958-4964.
Crossref
Giovanni Spinelli, Rosella Guarini, Rumiana Kotsilkova, Evgeni Ivanov & Vittorio Romano. (2021) Experimental, Theoretical and Simulation Studies on the Thermal Behavior of PLA-Based Nanocomposites Reinforced with Different Carbonaceous Fillers. Nanomaterials 11:6, pages 1511.
Crossref
Aghnia Ilmiah Nurhudan, Sugeng Supriadi, Yudan Whulanza & Agung Shamsuddin Saragih. (2021) Additive manufacturing of metallic based on extrusion process: A review. Journal of Manufacturing Processes 66, pages 228-237.
Crossref
John Arnold, Korak Sarkar & Damon Smith. (2020) 3D printed bismuth oxide‐polylactic acid composites for radio‐mimetic computed tomography spine phantoms . Journal of Biomedical Materials Research Part B: Applied Biomaterials 109:6, pages 789-796.
Crossref
H.S. Bharath, Dileep Bonthu, Suhasini Gururaja, Pavana Prabhakar & Mrityunjay Doddamani. (2021) Flexural response of 3D printed sandwich composite. Composite Structures 263, pages 113732.
Crossref
Zhicheng Zhang, James Femi-Oyetoro, Ismail Fidan, Muhammad Ismail & Michael Allen. (2021) Prediction of Dimensional Changes of Low-Cost Metal Material Extrusion Fabricated Parts Using Machine Learning Techniques. Metals 11:5, pages 690.
Crossref
Alexander Oskolkov, Igor Bezukladnikov & Dmitriy Trushnikov. (2021) Indirect Temperature Measurement in High Frequency Heating Systems. Sensors 21:7, pages 2561.
Crossref
Magda Silva, Isabel S. Pinho, José A. Covas, Natália M. Alves & Maria C. Paiva. (2021) 3D printing of graphene-based polymeric nanocomposites for biomedical applications. Functional Composite Materials 2:1.
Crossref
Santa Di Cataldo, Sara Vinco, Gianvito Urgese, Flaviana Calignano, Elisa Ficarra, Alberto Macii & Enrico Macii. (2021) Optimizing Quality Inspection and Control in Powder Bed Metal Additive Manufacturing: Challenges and Research Directions. Proceedings of the IEEE 109:4, pages 326-346.
Crossref
Darragh S. Egan, Caitríona M. Ryan, Andrew C. Parnell & Denis P. Dowling. (2021) Using in-situ process monitoring data to identify defective layers in Ti-6Al-4V additively manufactured porous biomaterials. Journal of Manufacturing Processes 64, pages 1248-1254.
Crossref
Rakesh Kumar, Manoj Kumar & Jasgurpreet Singh Chohan. (2021) The role of additive manufacturing for biomedical applications: A critical review. Journal of Manufacturing Processes 64, pages 828-850.
Crossref
Elif DEMİRALP, Gülsüm DOĞRU & Handan YILMAZ. (2021) Additive Manufacturing (3D PRINTING) Methods and Applications in Dentistry. Clinical and Experimental Health Sciences 11:1, pages 182-190.
Crossref
Gyula Ferenc Vasvári, Dávid Csonka, Tamás Zsebe, Ádám Schiffer, Ivan Samardžić, Roland Told, Attila Péntek & Péter Maróti. (2021) CMT Additive Manufacturing Parameters Defining Aluminium Alloy Object Geometry and Mechanical Properties. Materials 14:6, pages 1545.
Crossref
Nosheen Fatma, Abid Haleem, Mohd Javaid & Shahbaz Khan. (2020) Comparison of Fused Deposition Modeling and Color Jet 3D Printing Technologies for the Printing of Mathematical Geometries. Journal of Industrial Integration and Management 06:01, pages 93-105.
Crossref
Naomi C. Paxton, Jeremy Dinoro, Jiongyu Ren, Maureen T. Ross, Ryan Daley, Renwu Zhou, Kateryna Bazaka, Robert G. Thompson, Zhilian Yue, Stephen Beirne, Damien G. Harkin, Mark C. Allenby, Cynthia S. Wong, Gordon G. Wallace & Maria A. Woodruff. (2021) Additive manufacturing enables personalised porous high-density polyethylene surgical implant manufacturing with improved tissue and vascular ingrowth. Applied Materials Today 22, pages 100965.
Crossref
Jesús E. González, Gabriela de Armas, Jeidy Negrin, Ana M. Beltrán, Paloma Trueba, Francisco J. Gotor, Eduardo Peón & Yadir Torres. (2021) Influence of Successive Chemical and Thermochemical Treatments on Surface Features of Ti6Al4V Samples Manufactured by SLM. Metals 11:2, pages 313.
Crossref
Hongyuan Shi, Peng Zhou, Jie Li, Chaozong Liu & Liqiang Wang. (2021) Functional Gradient Metallic Biomaterials: Techniques, Current Scenery, and Future Prospects in the Biomedical Field. Frontiers in Bioengineering and Biotechnology 8.
Crossref
Karolina Kołczyk-Siedlecka, Dawid Kutyła, Katarzyna Skibińska, Anna Jędraczka, Justyna Palczewska-Grela & Piotr Żabiński. (2021) Well-Ordered 3D Printed Cu/Pd-Decorated Catalysts for the Methanol Electrooxidation in Alkaline Solutions. Technologies 9:1, pages 6.
Crossref
Mika Salmi. (2021) Additive Manufacturing Processes in Medical Applications. Materials 14:1, pages 191.
Crossref
Nemanja MajstorovićV.V., Vidosav MajstorovićD.D., Radivoje MitrovićM.M. & Žarko MiškovićZ.Z.. (2021) Industry 4.0 and their application in medicine and dentistry, as well as the fight against the COVID-19 pandemic. Tehnika 76:4, pages 509-520.
Crossref
Mohd Javaid & Abid Haleem. (2021) 3D bioprinting applications for the printing of skin: A brief study. Sensors International 2, pages 100123.
Crossref
Aoife C. Doyle, Darragh S. Egan, Caitríona M. Ryan, Andrew C. Parnell & Denis P. Dowling. (2021) Application of the STRAY statistical learning algorithm for the evaluation of in-situ process monitoring data during L-PBF additive manufacturing.. Procedia Manufacturing 54, pages 250-256.
Crossref
Christopher M. Henson, Nathan I. Decker & Qiang Huang. (2021) A digital twin strategy for major failure detection in fused deposition modeling processes. Procedia Manufacturing 53, pages 359-367.
Crossref
S. Pratheesh Kumar, S. Elangovan, R. Mohanraj & J.R. Ramakrishna. (2021) A review on properties of Inconel 625 and Inconel 718 fabricated using direct energy deposition. Materials Today: Proceedings 46, pages 7892-7906.
Crossref
Madheswaran Subramaniyan, Prakash Eswaran, Anandhamoorthy Appusamy, P. Srimannarayana Raju, V. Rahini, T.R. Madhumitha & R. Thisha. (2021) A survey on applications of additive manufacturing techniques in tissue engineering. Materials Today: Proceedings 45, pages 8036-8040.
Crossref
Abid Haleem, Pawan Gupta, Shashi Bahl, Mohd Javaid & Lalit Kumar. (2021) 3D scanning of a carburetor body using COMET 3D scanner supported by COLIN 3D software: Issues and solutions. Materials Today: Proceedings 39, pages 331-337.
Crossref
Sajad Karimi, Soongeol Kwon & Fuda Ning. (2021) Energy-aware production scheduling for additive manufacturing. Journal of Cleaner Production 278, pages 123183.
Crossref
Jonathan W. Pegues, Michael A. Melia, Raymond Puckett, Shaun R. Whetten, Nicolas Argibay & Andrew B. Kustas. (2021) Exploring additive manufacturing as a high-throughput screening tool for multiphase high entropy alloys. Additive Manufacturing 37, pages 101598.
Crossref
Jasvinder Singh, Gurminder Singh & Pulak Mohan Pandey. 2021. Additive Manufacturing with Functionalized Nanomaterials. Additive Manufacturing with Functionalized Nanomaterials 55 85 .
Farnoosh Pahlevanzadeh, Hamid Reza. Bakhsheshi-Rad, Dermot Brabazon, Mahshid Kharaziha, Ahmad Fauzi Ismail, Safian Sharif, Mahmood Razzaghi & Filippo Berto. 2021. Encyclopedia of Materials: Composites. Encyclopedia of Materials: Composites 1013 1028 .
Loucas Papadakis. 2021. Additive Manufacturing. Additive Manufacturing 685 721 .
Yih Bing Chu & Chee Wah Chang. 2021. Advances in Electrical and Electronic Engineering and Computer Science. Advances in Electrical and Electronic Engineering and Computer Science 1 12 .
Nosheen Fatma, Abid Haleem, Shashi Bahl & Mohd Javaid. 2021. Current Advances in Mechanical Engineering. Current Advances in Mechanical Engineering 869 879 .
Mohd Imran Khan, Shahbaz Khan & Abid Haleem. 2021. Ergonomics for Improved Productivity. Ergonomics for Improved Productivity 157 163 .
Ankita Jaisingh Sheoran, Arunesh Chandra & Harish Kumar. 2021. Recent Advances in Mechanical Engineering. Recent Advances in Mechanical Engineering 553 566 .
Bhuvnesh Chatwani, Deepanshu Nimesh, Kuldeep Chauhan, Mohd Shuaib & Abid Haleem. 2021. Advances in Manufacturing and Industrial Engineering. Advances in Manufacturing and Industrial Engineering 1015 1030 .
Deepak Kumar, Abhishek, Pradeep Kumar Yadav & Jitendra Bhaskar. 2021. Advances in Manufacturing and Industrial Engineering. Advances in Manufacturing and Industrial Engineering 865 875 .
Pranay Arun Kumar & Stephen Jia Wang. 2021. Interactivity and Game Creation. Interactivity and Game Creation 446 460 .
V. Ricotta, R. Ian Campbell, T. Ingrassia & V. Nigrelli. 2021. Advances on Mechanics, Design Engineering and Manufacturing III. Advances on Mechanics, Design Engineering and Manufacturing III 241 248 .
Mohammadreza Lalegani Dezaki & M. K. A. Mohd Ariffin. 2021. Fused Deposition Modeling Based 3D Printing. Fused Deposition Modeling Based 3D Printing 195 212 .
Ralf D. Fischer, Jan Klasen & Bart C. Prorok. 2021. Thermomechanics & Infrared Imaging, Inverse Problem Methodologies and Mechanics of Additive & Advanced Manufactured Materials, Volume 7. Thermomechanics & Infrared Imaging, Inverse Problem Methodologies and Mechanics of Additive & Advanced Manufactured Materials, Volume 7 87 92 .
İsmail AKTİTİZ, Kadir AYDIN & Alparslan TOPCU. (2020) Stereolitografi (SLA) Tekniği ile Basılan 3 Boyutlu Polimer Yapılarda İkincil Kürleme Süresinin Mekanik Özelliklere EtkisiThe Effect of Post-Curing Time on Mechanical Properties in 3D Polymer Materials Printed by Stereolithography (SLA) Method. Çukurova Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi 35:4, pages 949-958.
Crossref
André Edelmann, Monique Dubis & Ralf Hellmann. (2020) Selective Laser Melting of Patient Individualized Osteosynthesis Plates—Digital to Physical Process Chain. Materials 13:24, pages 5786.
Crossref
Zoltan Ujfalusi, Attila Pentek, Roland Told, Adam Schiffer, Miklos Nyitrai & Peter Maroti. (2020) Detailed Thermal Characterization of Acrylonitrile Butadiene Styrene and Polylactic Acid Based Carbon Composites Used in Additive Manufacturing. Polymers 12:12, pages 2960.
Crossref
Rajae JEMGHILI, Abdelmajid AIT TALEB & Khalifa MANSOURI. (2020) Additive Manufacturing Progress as a New Industrial Revolution. Additive Manufacturing Progress as a New Industrial Revolution.
Abid Haleem, Mohd Javaid & Raju Vaishya. (2020) 3D printing applications for the treatment of cancer. Clinical Epidemiology and Global Health 8:4, pages 1072-1076.
Crossref
V. Ricotta, R. I. Campbell, T. Ingrassia & V. Nigrelli. (2020) A new design approach for customised medical devices realized by additive manufacturing. International Journal on Interactive Design and Manufacturing (IJIDeM) 14:4, pages 1171-1178.
Crossref
Jerzy Bochnia, Malgorzata Blasiak & Tomasz Kozior. (2020) Tensile Strength Analysis of Thin-Walled Polymer Glass Fiber Reinforced Samples Manufactured by 3D Printing Technology. Polymers 12:12, pages 2783.
Crossref
Shukantu Dev Nath & Sabrina Nilufar. (2020) An Overview of Additive Manufacturing of Polymers and Associated Composites. Polymers 12:11, pages 2719.
Crossref
Hossein Gohari & Ahmad Barari. (2020) Producing High Precision Additive Manufacturing Parts by Direct Printing of NURBS Surfaces. Producing High Precision Additive Manufacturing Parts by Direct Printing of NURBS Surfaces.
Trevor Binedell, Karupppasamy Subburaj, Yoko Wong & Lucienne T M Blessing. (2020) Leveraging Digital Technology to Overcome Barriers in the Prosthetic and Orthotic Industry: Evaluation of its Applicability and Use During the COVID-19 Pandemic. JMIR Rehabilitation and Assistive Technologies 7:2, pages e23827.
Crossref
Darragh S. Egan, Kiera Jones & Denis P. Dowling. (2020) Selective laser melting of Ti-6Al-4V: Comparing μCT with in-situ process monitoring data. CIRP Journal of Manufacturing Science and Technology 31, pages 91-98.
Crossref
Pei-Yi Lin, Fang-Cheng Shen, Kuo-Tsai Wu, Sheng-Jye Hwang & Huei-Huang Lee. (2020) Process optimization for directed energy deposition of SS316L components. The International Journal of Advanced Manufacturing Technology 111:5-6, pages 1387-1400.
Crossref
Giovanni Spinelli, Rumiana Kotsilkova, Evgeni Ivanov, Vladimir Georgiev, Radost Ivanova, Carlo Naddeo & Vittorio Romano. (2020) Dielectric Spectroscopy and Thermal Properties of Poly(lactic) Acid Reinforced with Carbon-Based Particles: Experimental Study and Design Theory. Polymers 12:10, pages 2414.
Crossref

Displaying 200 of 253 citing articles. Use the download link below to view the full list of citing articles.

Download full citations list

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.