Additive manufacturing applications in medical cases: A literature based reviewFootnote

Peer review under responsibility of Alexandria University Faculty of Medicine.

Footnote

Available online 6 October 2017

References

• D.G.AhnJ.Y.LeeD.Y.YangRapid prototyping and reverse engineering application for orthopaedic surgery planningJ Mech Sci Technol2020061928
   Web of Science ®Google Scholar
• H.AhnSungC.S.LeeW.JeongDevelopment of translucent FDM parts by post processingRapid Prototyp J102004218224
   Web of Science ®Google Scholar
• J.Al-SukhunR.KontioC.LindqvistJ.TornwallUse of a prefabricated titanium plate for accurate reconstruction of secondary orbital blow-out fracturePlast Reconstr Surg117200616481651
   PubMed Web of Science ®Google Scholar
• C.ArrietaS.UribeG.RamosQuantitative assessments of geometric errors for rapid prototyping in medical applicationsRapid Prototyp J182012431442
   Web of Science ®Google Scholar
• A.AzariS.NikzadThe evolution of rapid prototyping in dentistry: a reviewRapid Prototyp J152009216225
   Web of Science ®Google Scholar
• M.BalazicJ.KopacImprovements of medical implants based on modern materials and new technologiesJ Achieve Mater Manuf Eng2520073134
   Google Scholar
• C.Bang PhamK.Fai LeongT.Chiun LimK.Sin ChianRapid freeze prototyping technique in bio plotters for tissue scaffold fabricationRapid Prototyp J142008246253
   Web of Science ®Google Scholar
• Beneke F, Metzen M, Bergers D. Study of a process chain for the use of medical graphic data in technical applications. Materialise Archives Leuven; 2003.
   Google Scholar
• R.BibbD.EggbeerP.EvansA.BoccaA.SugarRapid manufacture of custom fitting surgical guidesRapid Prototyp J152009346354
   Web of Science ®Google Scholar
• M.BohnerY.LoosliG.BaroudD.LacroixCommentary: deciphering the link between architecture and biological response of a bone graft substituteActa Biomater72011478484
   PubMed Web of Science ®Google Scholar
• A.ButscherM.BohnerS.HofmannL.GaucklerR.MüllerStructural and material approaches to bone tissue engineering in powder-based three-dimensional printingActa Biomater72011907920
   PubMed Web of Science ®Google Scholar
• Y.Chen3D texture mapping for rapid manufacturingComput-Aided Des Appl42007761771
   Google Scholar
• Y.L.ChengM.L.LeeDevelopment of dynamic masking rapid prototyping system for application in tissue engineeringRapid Prototyp J1520092941
   Web of Science ®Google Scholar
• L.K.CheungM.C.M.WongL.L.S.WongRefinement of facial reconstructive surgery by stereo model planningAnn R Aust College Dent Surg2002129132
   PubMedGoogle Scholar
• J.ChimentoM.Jason HighsmithN.Crane3D printed tooling for thermoforming of medical devicesRapid Prototyp J172011387392
   Web of Science ®Google Scholar
• Christensen B. New device prints human tissue; 2009. <http://www.livescience.com/5977-device-prints-human-tissue> [HTML].
   Google Scholar
• M.Conner3-D medical printer to print body partsEDN552010918
   Google Scholar
• C.ConnollyImaging developments benefit medical applicationsSensor Rev252005246248
   Google Scholar
• S.W.DahakeA.M.KutheM.B.MawaleA.D.BagdeApplications of medical rapid prototyping assisted customized surgical guides in complex surgeriesRapid Prototyp J222016934946
   Web of Science ®Google Scholar
• N.De BeerA.van der MerwePatient specific intervertebral disc implants using rapid manufacturing technologyRapid Prototyp J192013126139
   Web of Science ®Google Scholar
• C.U.De JonghA.H.BassonC.SchefferPredictive modelling of cervical disc implant wearJ Biomech41200831773183
   PubMed Web of Science ®Google Scholar
• T.R.DeshmukhA.M.KutheS.M.ChawareB.VaibhavD.S.IngoleRapid prototyping assisted fabrication of the customised temporomandibular joint implant: a case reportRapid Prototyp J172011362368
   Web of Science ®Google Scholar
• R.DhakshyaniY.NukmanN.Abu OsmanC.VijayPreliminary report: rapid prototyping models for Dysplastic hip surgeryOpen Med62011266270
   Web of Science ®Google Scholar
• K.DobranskyLabeling, looping, and social control: contextualizing diagnosis in mental health careP.J.McGannDavid J.HutsonSociology of diagnosisAdvances in medical sociologyvol. 122011111131
   Google Scholar
• J.DomanskiK.SkalskiR.GrygorukA.MrózRapid prototyping in the intervertebral implant design processRapid Prototyp J212015735746
   Web of Science ®Google Scholar
• S.J.EssesP.BermanA.I.BloomJ.SosnaClinical applications of physical 3D models derived from MDCT data and created by Rapid PrototypingAm J Roentgenol1962011683688
   PubMed Web of Science ®Google Scholar
• L.M.EvilaG.VallicrosaL.SerenóJ.CiuranaA.R.CiroRapid tooling using 3D printing system for manufacturing of customized tracheal stentRapid Prototyp J202014212
   Web of Science ®Google Scholar
• D.EyersK.DotchevTechnology review for mass customisation using rapid manufacturingAssembly Automation3020103946
   Web of Science ®Google Scholar
• J.FaberP.M.BertoM.QuaresmaRapid prototyping as a tool for diagnosis and treatment planning for maxillary canine impactionAm J Orthod Dentofac Orthop1292006583589
   PubMed Web of Science ®Google Scholar
• A.FaroukEsthetic rhinoplasty as an adjunctive technique in nasal oncoplastic surgeryAlex J Med522016347352
   Web of Science ®Google Scholar
• I.GibsonL.K.CheungS.P.ChowThe use of rapid prototyping to assist medical applicationsRapid Prototyp J1220065358
   Web of Science ®Google Scholar
• I.GibsonT.KvanL.WaiMingRapid prototyping for architectural modelsRapid Prototyp J820029195
   Web of Science ®Google Scholar
• S.GrahamRapid prototyping: a key to fast-tracking design to manufactureAssembly Automation202000291294
   Web of Science ®Google Scholar
• J.GuarinoS.TennysonG.McCainL.BondK.SheaH.KingRapid prototyping technology for surgeries of the pediatric spine and pelvisJ Pediatr Orthopaedics272007955960
   PubMed Web of Science ®Google Scholar
• A.HaleemA.KhanM.JavaidDesign and Development of Smart Landline Using 3D Printing TechniqueInt J Adv Res Innovation42016438447
   Google Scholar
• O.L.A.HarryssonD.R.CormierL.J.MarcellinK.JajalRapid prototyping for treatment of canine limb deformitiesRapid Prototyp J920033742
   Web of Science ®Google Scholar
• J.HeD.LiB.LuZ.WangT.ZhangCustom fabrication of a composite hemi knee joint based on rapid prototypingRapid Prototyp J122006198205
   Web of Science ®Google Scholar
• N.HerbertD.SimpsonW.D.SpenceW.IonA preliminary investigation into the development of 3-D printing of prosthetic socketsJ Rehabilitation Res Dev422005141146
   PubMed Web of Science ®Google Scholar
• L.C.HieuE.BohezJ.Vander SlotenDesign for medical rapid prototyping of cranioplasty implantsRapid Prototyp J92003175186
   Web of Science ®Google Scholar
• L.C.HieuN.ZlatovJ.VanderSlotenMedical rapid prototyping applications and methodsAssembly Automation252005284292
   Web of Science ®Google Scholar
• S.J.HollisterPorous scaffold design for tissue engineeringNat Mater52006 pp. 590-590
   Web of Science ®Google Scholar
• M.R.HutchinsonThe burden of musculoskeletal diseases in the United States: prevalence, societal and economic costJ Am College Surg2082009e5e6 [1st ed.]
   Google Scholar
• D.W.HutmacherScaffolds in tissue engineering bone and cartilageBiomaterials21200025292543
   PubMed Web of Science ®Google Scholar
• D.W.HutmacherM.SittingerM.V.RisbudScaffold-based tissue engineering: rationale for computer-aided design and solid free-form fabrication systemsTrends Biotechnol222004354362
   PubMed Web of Science ®Google Scholar
• S.M.S.IbrahiemA.FaroukI.L.SalemFacial rejuvenation: serial fat graft transferAlex J Med522016371376
   Web of Science ®Google Scholar
• W.J.JamesM.A.SlabbekoornW.A.EdginC.K.HardinCorrection of congenital malar hypoplasia using stereolithography for presurgical planningJ Oral Maxillofac Surg561998512517
   PubMed Web of Science ®Google Scholar
• R.JamiesonB.HolmerA.AshbyHow rapid prototyping can assist in the development of new orthopaedic products: a case studyRapid Prototyp J119953841
   Web of Science ®Google Scholar
• Javaid M, Haleem A, Shuaib M, Kumar L. Product design and development using combination of Steinbichler comet 3D scanner and projet 3D printer. In: National conference on innovative trends in Mechanical Engineering-2017 held at Department of Mechanical Engineering, Shri Mata Vaishno Devi University Katra, Jammu, from 3–4 March 2017.
   Google Scholar
• M.JavaidL.KumarV.KumarA.HaleemProduct design and development using polyjet rapid prototyping technologyInt J Control Theory Inf520151219
   Google Scholar
• X.JiangX.ChengQ.PengModels partition for 3D printing objects using skeletonRapid Prototyp J2320175464
   Web of Science ®Google Scholar
• M.JiménezL.RomeroM.DomínguezM.M.EspinosaRapid prototyping model for the manufacturing by thermoforming of occlusal splintsRapid Prototyp J2120155669
   Web of Science ®Google Scholar
• M.F.JohnA.T.BradleyBrain imaging and political behaviorSteven A.PetersonAlbertSomitBiology and politicsResearch in biopoliticsvol. 92011231255
   Google Scholar
• C.Kai ChuaK.Fai LeongC.Sing LimV.T.ThienMultimedia courseware for teaching of rapid prototyping systemsRapid Prototyp J1620108089
   Web of Science ®Google Scholar
• C.C.KaiC.S.MengL.S.ChingE.K.HoeL.K.FahRapid prototyping assisted surgery planningInt J Adv Manuf Technol141998624630
   Web of Science ®Google Scholar
• B.S.KimD.J.MooneyDevelopment of biocompatible synthetic extracellular matrices for tissue engineeringTrends Biotechnol161998224230
   PubMed Web of Science ®Google Scholar
• A.KochanRapid developments in rapid prototypingAssembly Automation1519951819
   Web of Science ®Google Scholar
• A.KochanRapid prototyping gains speed, volume and precisionAssembly Automation202000295299
   Web of Science ®Google Scholar
• S.P.KrishnanA.DawoodR.RichardsJ.HenckelA.J.HartA review of rapid prototyped surgical guides for patient-specific total knee replacementBone Joint J94201214571461
   Google Scholar
• L.KumarA.HaleemQ.TanveerM.JavaidM.ShuaibV.KumarRapid manufacturing: classification and recent developmentInt J Adv Eng Res Sci (IJAERS)420172940
   Google Scholar
• L.KumarQ.TanveerV.KumarM.JavaidA.HaleemDeveloping low cost 3D printerInt J Appl Sci Eng Res52016433447
   Google Scholar
• V.KumarL.KumarA.HaleemSelection of rapid Prototyping technology using an ANP based approachIOSR J Mech Civ Eng1320167178
   Google Scholar
• V.KumarL.KumarM.RajeshA.HaleemDesign and development of thermal rapid prototyping machine and its applicationInt J Emerg Technol Eng Res (IJETER)42016101106
   Google Scholar
• S.C.LeiM.D.FrankD.AndersonT.BrownA method to represent heterogeneous materials for rapid prototyping: the matryoshka approachRapid Prototyp J202014390402
   PubMed Web of Science ®Google Scholar
• Y.LiD.LiB.LuD.GaoJ.ZhouCurrent status of additive manufacturing for tissue engineering scaffoldRapid Prototyp J212015747762
   Web of Science ®Google Scholar
• Q.LiuM.C.LeuS.M.SchmittRapid prototyping in dentistry: technology and applicationInt J Adv Manuf Technol2932006317335
   Web of Science ®Google Scholar
• L.LuB.ChenA.SharfBuild-to-lastACM Trans Graphics332014110
   Web of Science ®Google Scholar
• R.MakovecDigital technologies in dental laboratoriesAnn DAAAM Proc20101579
   Google Scholar
• T.MallepreeD.BergersAccuracy of medical RP modelsRapid Prototyp J152009325332
   Web of Science ®Google Scholar
• Malley OF. Research to inform the improved accuracy of zygomatic implants placed using computer design and additive manufactured surgical guides. In: ADT 5th triennial congress Beijing, China 6th–8th September 2014.
   Google Scholar
• E.MaravelakisK.DavidA.AntoniadisA.ManiosN.BilalisY.PapaharilaouReverse engineering techniques for cranioplasty: a case studyJ Med Eng Technol322009115121
   Google Scholar
• G.MarchelliR.PrabhakarD.StortiM.GanterThe guide to glass 3D printing: developments, methods, diagnostics and resultsRapid Prototyp J172011187194
   Web of Science ®Google Scholar
• P.J.McGannTroubling diagnosesP.J.McGannJ.Hutson DavidSociology of diagnosisAdvances in medical sociologyvol. 122011Emerald Group Publishing Limited331362
   Google Scholar
• P.MehraJ.MinerR.D’InnocenzoM.NadershahUse of 3-D stereolithographic models in oral and maxillofacial surgeryJ Maxillofac Oral Surg102011613
   PubMedGoogle Scholar
• F.P.W.MelchelsJ.FeijenD.W.GrijpmaA review of stereolithography and its applications in biomedical engineeringBiomaterials31201061216130
   PubMed Web of Science ®Google Scholar
• J.MilovanovicM.TrajanovicMedical applications of rapid prototypingMech Eng520077985
   Google Scholar
• V.MironovN.ReisB.DerbyReview: bioprinting: a beginningTissue Eng122006631634
   PubMedGoogle Scholar
• J.MizutaniT.MatsubaraM.FukuokaApplication of full-scale three-dimensional models in patients with rheumatoid cervical spineEur Spine J172008644649
   PubMed Web of Science ®Google Scholar
• K.MoriT.YamamotoK.OyamaY.NakaoModification of three-dimensional prototype temporal bone model for training in skull-base surgeryNeurosurg Rev322008233239
   PubMed Web of Science ®Google Scholar
• Moscaritolo A. Woman receives 3D printer created transplant Jaw. PC Mag; 2012. <http://www.pcmag>.
   Google Scholar
• M.W.NaingC.K.ChuaK.F.LeongY.WangFabrication of customised scaffolds using computer aided design and rapid prototyping techniquesRapid Prototyp J112005249259
   Web of Science ®Google Scholar
• S.NegiS.DhimanR.K.SharmaBasics and applications of rapid prototyping medical modelsRapid Prototyp J202014256267
   Web of Science ®Google Scholar
• P.NgP.S.V.LeeJ.C.H.GohProsthetic sockets fabrication using rapid prototyping technologyRapid Prototyp J820025359
   Web of Science ®Google Scholar
• R.NooraniRapid prototyping: principles and applications2006John Wiley and Sons IncHoboken (NJ) ISBN: 978-0-471-73001-9
   Google Scholar
• A.P.NyalukeD.AnH.R.LeepH.R.ParsaeiRapid prototyping: applications in academic institutions and industryComput Ind Eng291995345349
   Web of Science ®Google Scholar
• F.L.O'MalleyH.MillwardD.EggbeerR.WilliamsR.CooperThe use of adenosine triphosphate bioluminescence for assessing the cleanliness of improve materials used in medical applicationsAddit Manuf920162529
   Web of Science ®Google Scholar
• F.OstuzziV.RognoliJ.SaldienM.Levi+TUO project: low-cost 3D printers as helpful tool for small communities with rheumatic diseasesRapid Prototyp J212015491505
   Web of Science ®Google Scholar
• I.T.OzbolatY.YuBioprinting toward organ fabrication: challenges and future trendsIEEE Trans Biomed Eng602013691699
   PubMed Web of Science ®Google Scholar
• W.S.PaivaR.AmorimD.A.F.BezerraM.MasiniApplication of the stereolithography technique in complex spine surgeryArq Neuropsiquiatr652007443445
   PubMed Web of Science ®Google Scholar
• M.J.PeltolaP.K.VallittuV.VuorinenA.A.J.AhoA.PuntalaK.M.J.AitasaloNovel composite implant in craniofacial bone reconstructionEur Arch Otorhinolaryngol2692011623628
   PubMed Web of Science ®Google Scholar
• S.M.PeltolaF.P.W.MelchelsD.W.GrijpmaM.KellomäkiA review of rapid prototyping techniques for tissue engineering purposesAnn Med402008268280
   PubMed Web of Science ®Google Scholar
• P.PerestreloP.BártoloM.ParanhosP.NoritomiJ.SilvaCranial biomechanical simulationProc CIRP52013305309
   Google Scholar
• J.PoukensP.LaevenM.BeerensA classification of cranial implants based on the degree of difficulty in computer design and manufactureInt J Med Robotics Comput Assisted Surg420084650
   PubMed Web of Science ®Google Scholar
• M.SalmiK.S.PaloheimoJ.TuomiJ.WolffA.MäkitieAccuracy of medical models made by additive manufacturing (rapid manufacturingJ Cranio-Maxillofac Surg412013603609
   PubMed Web of Science ®Google Scholar
• M.SalmiJ.TuomiS.PaloheimoKaijaPatient specific reconstruction with 3D modeling and DMLS additive manufacturingRapid Prototyp J182012209214
   Web of Science ®Google Scholar
• B.SangheraS.NaiqueY.PapaharilaouA.AmisPreliminary study of rapid prototype medical modelsRapid Prototyp J72001275284
   Web of Science ®Google Scholar
• S.SedghiM.SandersonP.CloughMedical image resources used by health care professionalsAslib Proc632011570585
   Google Scholar
• Shuaib M, Javaid M, Kumar L, Haleem A. Using additive manufacturing for improving building services. In: International conference and exhibition on building utilities organized by Department of Mechanical Engineering, Faculty of Engineering & Technology, Jamia Millia Islamia, New Delhi on Dec 2016. p. 53–64.
   Google Scholar
• Shuaib M, Kumar L, Javaid M, Haleem A, Khan MI. A comparison of additive manufacturing technologies. In: International conference on advance production and industrial engineering held at DTU Delhi in Dec 2016. p. 353–60.
   Google Scholar
• S.SingareL.DichenL.BinghengG.ZhenyuL.YaxiongCustomized design and manufacturing of chin implant based on rapid prototypingRapid Prototyp J112005113118
   Web of Science ®Google Scholar
• S.SingareL.YaxiongL.DichenL.BinghengH.SanhuL.GangFabrication of customised maxilla facial prosthesis using computer aided design and rapid prototyping techniquesRapid Prototyp J122006206213
   Web of Science ®Google Scholar
• R.SodianS.WeberM.MarkertStereolithographic models for surgical planning in congenital heart surgeryAnn Thorac Surg83200718541857
   PubMed Web of Science ®Google Scholar
• C.SongY.YangY.WangJ.YuD.WangPersonalized femoral component design and its direct manufacturing by selective laser meltingRapid Prototyp J222016330337
   Web of Science ®Google Scholar
• K.StierR.BrownIntegrating rapid prototyping technology into the curriculumJ Ind Technol17200016
   Google Scholar
• L.W.SunR.Y.W.LeeW.LuL.D.K.LukModelling and simulation of the intervertebral movements of the lumbar spine using an inverse kinematic algorithmMed Biol Eng Compu422004740746
   PubMed Web of Science ®Google Scholar
• A.M.TarikI.GibsonX.LiState of the art and future direction of additive manufactured scaffolds-based bone tissue engineeringRapid Prototyp J2020141326
   Web of Science ®Google Scholar
• J.TimothyO.HornL.A.HarryssonDevelopment of a patient-specific bone analog for the biomechanical evaluation of custom implantsRapid Prototyp J2020144149
   Web of Science ®Google Scholar
• J.TuomiK.S.PaloheimoJ.VehviläinenA novel classification and online platform for planning and documentation of medical applications of additive manufacturingSurg Innovation212014553559
   PubMed Web of Science ®Google Scholar
• R.Van NoortThe future of dental devices is digitalDent Mater282012312
   PubMed Web of Science ®Google Scholar
• R.VasireddiB.BasuConceptual design of three-dimensional scaffolds of powder-based materials for bone tissue engineering applicationsRapid Prototyp J212015716724
   Web of Science ®Google Scholar
• K.VestalR.MasseyWork transformation in health careHealth Manpower Manage201994913
   PubMedGoogle Scholar
• C.S.WangW.H.A.WangM.C.LinSTL rapid prototyping bio-CAD model for CT medical image segmentationComput Ind612010187197
   Web of Science ®Google Scholar
• W.WangT.Y.WangZ.YangCost-effective printing of 3D objects with skin-frame structuresACM Transon Graphics322013110
   Web of Science ®Google Scholar
• William H.KitchensFDA regulatory approval process for medical productsMarie C.ThursbyTechnological innovation: generating economic resultsAdvances in the study of entrepreneurship, innovation & economic growthvol. 262016201229
   Google Scholar
• A.WillisJ.SpeicherD.B.CooperRapid prototyping 3D objects from scanned measurement dataImage Vis Comput25200711741184
   Web of Science ®Google Scholar
• K.V.WongA.HernandezA review of additive manufacturingISRN Mech Eng2012110
   Google Scholar
• L.YaxiongL.DichenL.BinghengH.SanhuL.GangThe customised mandible substitute based on rapid prototypingRapid Prototyp J92003167174
   Web of Science ®Google Scholar
• W.Y.YeongC.K.ChuaK.F.LeongM.ChandrasekaranRapid prototyping in tissue engineering: challenges and potentialTrends Biotechnol222004643652
   PubMed Web of Science ®Google Scholar
• H.ZenhaL.AzevedoL.RiosThe application of 3-D bio-modelling technology in complex mandibular reconstruction experience of 47 clinical casesEur J Plast Surg342010257265
   Google Scholar