Helen Tadesse, Balkeshwar Singh, Habtamu Deresso, Shimelis Lemma, Gyanendra Kumar Singh, Ashish Kumar Srivastava, Namrata Dogra & Ajay Kumar. (2024) Investigation of production bottlenecks and productivity analysis in soft drink industry: a case study of East Africa Bottling Share Company. International Journal on Interactive Design and Manufacturing (IJIDeM).
Crossref
Lauri Saarinen, Lauri Loikkanen, Kari Tanskanen & Riikka Kaipia. (2024) Operations planning during absolute uncertainty: A longitudinal case study of uncertainty transitions and operations planning adaptations in grocery supply chains. SSRN Electronic Journal.
Crossref
Klemen Kovič, Robert Ojsteršek & Iztok Palčič. (2023) Simultaneous Use of Digital Technologies and Industrial Robots in Manufacturing Firms. Applied Sciences 13:10, pages 5890.
Crossref
Edwin Hlangwani & Wesley Doorsamy. 2023. Indigenous Fermented Foods for the Tropics. Indigenous Fermented Foods for the Tropics
393
408
.
Nagihan AKKURT & Servet HASGÜL. (2022) ÜRETİM SİSTEMLERİNDE DARBOĞAZ TESPİTİ: LİTERATÜR ARAŞTIRMASIBottleneck Detection in Production Systems: Literature Research. Uludağ University Journal of The Faculty of Engineering, pages 1285-1304.
Crossref
Ehsan Mahmoodi, Masood Fathi & Morteza Ghobakhloo. (2022) The impact of Industry 4.0 on bottleneck analysis in production and manufacturing: Current trends and future perspectives. Computers & Industrial Engineering 174, pages 108801.
Crossref
Xiuxuan Tian, Zhiyang Jia, Zunjun Wang & Yongsheng Qi. (2022) Single Machine Control for Energy Consumption Analysis in Bernoulli Serial Lines. Single Machine Control for Energy Consumption Analysis in Bernoulli Serial Lines.
Lin Li & MengChu Zhou. 2022. Sustainable Manufacturing Systems. Sustainable Manufacturing Systems
23
64
.
Eduardo Garcia, Nicolás Montés, Javier Llopis & Antonio Lacasa. (2022) Miniterm, a Novel Virtual Sensor for Predictive Maintenance for the Industry 4.0 Era. Sensors 22:16, pages 6222.
Crossref
Javier Llopis, Antonio Lacasa, Eduardo Garcia, Nicolás Montés, Lucía Hilario, Judith Vizcaíno, Cristina Vilar, Judit Vilar, Laura Sánchez & Juan Carlos Latorre. (2022) Manufacturing Maps, a Novel Tool for Smart Factory Management Based on Petri Nets and Big Data Mini-Terms. Mathematics 10:14, pages 2398.
Crossref
Marcus Frantzén, Sunith Bandaru & Amos H.C. Ng. (2022) Digital-twin-based decision support of dynamic maintenance task prioritization using simulation-based optimization and genetic programming. Decision Analytics Journal 3, pages 100039.
Crossref
Hatem Algabroun, Jon Bokrantz, Basim Al-Najjar & Anders Skoogh. (2020) Development of digitalised maintenance – a concept. Journal of Quality in Maintenance Engineering 28:2, pages 367-390.
Crossref
Maheshwaran Gopalakrishnan, Mukund Subramaniyan & Anders Skoogh. (2020) Data-driven machine criticality assessment – maintenance decision support for increased productivity. Production Planning & Control 33:1, pages 1-19.
Crossref
Zheng Xue, Tao Li, Shi-tong Peng, Chao-yong Zhang & Hong-chao Zhang. (2022) A data-driven method to predict future bottlenecks in a remanufacturing system with multi-variant uncertainties基于数据驱动方法的再制造系统瓶颈分析. Journal of Central South University 29:1, pages 129-145.
Crossref
Mostafa Mohamed Ali Elbeblawi, Hassan Ali Abdelhak Elsaghier, Mostafa Tantawy Mohamed Amin & Wael Rashad Elrawy AbdellahMostafa Mohamed Ali Elbeblawi, Hassan Ali Abdelhak Elsaghier, Mostafa Tantawy Mohamed Amin & Wael Rashad Elrawy Abdellah. 2022. Surface Mining Technology. Surface Mining Technology
133
200
.
E. Garcia, N. Montes, N. Rosillo, J. Llopis & A. Lacasa. 2022. Informatics in Control, Automation and Robotics. Informatics in Control, Automation and Robotics
1
16
.
Mukund Subramaniyan, Anders Skoogh, Jon Bokrantz, Muhammad Azam Sheikh, Matthias Thürer & Qing Chang. (2021) Artificial intelligence for throughput bottleneck analysis – State-of-the-art and future directions. Journal of Manufacturing Systems 60, pages 734-751.
Crossref
Gabriela Ventura Silva, Matthias Thomitzek, Tim Abraham & Christoph Herrmann. (2021) Bottleneck reduction strategies for energy efficiency in the battery manufacturing. Procedia CIRP 104, pages 1017-1022.
Crossref
Mukund Subramaniyan, Anders Skoogh, Azam Sheikh Muhammad, Jon Bokrantz, Björn Johansson & Christoph Roser. (2020) A data-driven approach to diagnosing throughput bottlenecks from a maintenance perspective. Computers & Industrial Engineering 150, pages 106851.
Crossref
Binghai Zhou & Song Lin. (2019) A novel analysis model for optimization performance of Bernoulli serial production system considering rework processes. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 234:1-2, pages 295-309.
Crossref
Eduardo García, Nicolás Montes & Mónica Alacreu. 2020. Informatics in Control, Automation and Robotics. Informatics in Control, Automation and Robotics
101
117
.
Mukund Subramaniyan, Anders Skoogh, Azam Sheikh Muhammad, Jon Bokrantz & Ebru Turanoğlu Bekar. (2019) A prognostic algorithm to prescribe improvement measures on throughput bottlenecks. Journal of Manufacturing Systems 53, pages 271-281.
Crossref
Ahmet Turker, Adnan Aktepe, Ali Inal, Olcay Ersoz, Gulesin Das & Burak Birgoren. (2019) A Decision Support System for Dynamic Job-Shop Scheduling Using Real-Time Data with Simulation. Mathematics 7:3, pages 278.
Crossref
Yang Yu, Junwei Wang, Ke Ma & Wei Sun. (2018) Seru system balancing: Definition, formulation, and exact solution. Computers & Industrial Engineering 122, pages 318-325.
Crossref
Dragan Djurdjanovic, Laine Mears, Farbod Akhavan Niaki, Asad Ul Haq & Lin Li. (2018) State of the Art Review on Process, System, and Operations Control in Modern Manufacturing. Journal of Manufacturing Science and Engineering 140:6.
Crossref
Maheshwaran Gopalakrishnan & Anders Skoogh. (2018) Machine criticality based maintenance prioritization. International Journal of Productivity and Performance Management 67:4, pages 654-672.
Crossref
Xinyan Ou, Jorge Arinez, Qing Chang & Jing Zou. (2017) Performance analysis of a composite work cell with a gantry and system reconfiguration. Journal of Manufacturing Systems 45, pages 212-221.
Crossref
Yuntian Ge, Lin Li & Yong Wang. (2017) Modeling of Bernoulli production line with the rework loop for transient and steady-state analysis. Journal of Manufacturing Systems 44, pages 22-41.
Crossref
Torbjörn Ylipää, Anders Skoogh, Jon Bokrantz & Maheshwaran Gopalakrishnan. (2017) Identification of maintenance improvement potential using OEE assessment. International Journal of Productivity and Performance Management 66:1, pages 126-143.
Crossref
Samwel Victor Manyele. (2017) Analysis of Waste-Rock Transportation Process Performance in an Open-Pit Mine Based on Statistical Analysis of Cycle Times Data. Engineering 09:07, pages 649-679.
Crossref
Emin Gundogar, Murat Sari & Abdullah H. Kokcam. (2016) Dynamic bottleneck elimination in mattress manufacturing line using theory of constraints. SpringerPlus 5:1.
Crossref
Maheshwaran Gopalakrishnan, Anders Skoogh & Christoph Laroque. (2016) Buffer utilization based scheduling of maintenance activities by a shifting priority approach - a simulation study. Buffer utilization based scheduling of maintenance activities by a shifting priority approach - a simulation study.
Dazhong Wu, David W. Rosen & Dirk Schaefer. (2015) Scalability Planning for Cloud-Based Manufacturing Systems. Journal of Manufacturing Science and Engineering 137:4.
Crossref
Zeyi Sun, Dong Wei, Lingyun Wang & Lin Li. (2015) Data driven production runtime energy control of manufacturing systems. Data driven production runtime energy control of manufacturing systems.
Tang Zhe & Wu Jiang. (2015) Energy consumption management for multistage production systems considering real time pricing. Energy consumption management for multistage production systems considering real time pricing.
Yong Wang & Lin Li. (2015) A Novel Modeling Method for Both Steady-State and Transient Analyses of Serial Bernoulli Production Systems. IEEE Transactions on Systems, Man, and Cybernetics: Systems 45:1, pages 97-108.
Crossref
Yang Li, Qing Chang, Michael P. Brundage, Stephan Biller, Jorge Arinez & Guoxian Xiao. (2015) Market Demand Oriented Data-Driven Modeling for Dynamic Manufacturing System Control. IEEE Transactions on Systems, Man, and Cybernetics: Systems 45:1, pages 109-121.
Crossref
Maheshwaran Gopalakrishnan, Anders Skoogh & Christoph Laroque. (2014) Simulation-based planning of maintenance activities by a shifting priority method. Simulation-based planning of maintenance activities by a shifting priority method.
Johannes Hinckeldeyn, Rob Dekkers, Nils Altfeld & Jochen Kreutzfeldt. (2014) Expanding bottleneck management from manufacturing to product design and engineering processes. Computers & Industrial Engineering 76, pages 415-428.
Crossref
Dongping Zhao, Xitian Tian & Junhao Geng. (2014) A Bottleneck Detection Algorithm for Complex Product Assembly Line Based on Maximum Operation Capacity. Mathematical Problems in Engineering 2014, pages 1-9.
Crossref
Yong Wang & Lin Li. (2013) Time-of-use based electricity demand response for sustainable manufacturing systems. Energy 63, pages 233-244.
Crossref
Christoph H. Glock & Mohamad Y. Jaber. (2013) Learning effects and the phenomenon of moving bottlenecks in a two-stage production system. Applied Mathematical Modelling 37:18-19, pages 8617-8628.
Crossref
Qing Chang, Guoxian Xiao, Stephan Biller & Lin Li. (2013) Energy Saving Opportunity Analysis of Automotive Serial Production Systems (March 2012). IEEE Transactions on Automation Science and Engineering 10:2, pages 334-342.
Crossref
Zeyi Sun & Lin Li. (2013) Opportunity Estimation for Real-Time Energy Control of Sustainable Manufacturing Systems. IEEE Transactions on Automation Science and Engineering 10:1, pages 38-44.
Crossref
Jun Ni & Xiaoning Jin. (2012) Decision support systems for effective maintenance operations. CIRP Annals 61:1, pages 411-414.
Crossref
Hamiche Ait Mimoune, Amine Boudghene Stambouli & Samir Flazi. (2022) Prioritising Machine Downtime and Simulation-Based Optimization System. SSRN Electronic Journal.
Crossref