Citations (32)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (8)
Martina Calzavara, Serena Finco, Daria Battini, Fabio Sgarbossa & Alessandro Persona. (2022) A Joint Assembly Line Balancing and Feeding Problem (JALBFP) considering direct and indirect supply strategies. International Journal of Production Research 60:19, pages 5727-5745.
Read now
Read now
Zhengyang Hu, Goutham Ramaraj & Guiping Hu. (2020) Production planning with a two-stage stochastic programming model in a kitting facility under demand and yield uncertainties. International Journal of Management Science and Engineering Management 15:3, pages 237-246.
Read now
Read now
Nico André Schmid & Veronique Limère. (2019) A classification of tactical assembly line feeding problems. International Journal of Production Research 57:24, pages 7586-7609.
Read now
Read now
Robin Hanson & Lars Medbo. (2019) Man-hour efficiency of manual kit preparation in the materials supply to mass-customised assembly. International Journal of Production Research 57:11, pages 3735-3747.
Read now
Read now
Antonio Casimiro Caputo, Pacifico Marcello Pelagagge & Paolo Salini. (2018) Selection of assembly lines feeding policies based on parts features and scenario conditions. International Journal of Production Research 56:3, pages 1208-1232.
Read now
Read now
Anna Brolin, Peter Thorvald & Keith Case. (2017) Experimental study of cognitive aspects affecting human performance in manual assembly. Production & Manufacturing Research 5:1, pages 141-163.
Read now
Read now
Mustapha Sali, Evren Sahin & Alain Patchong. (2015) An empirical assessment of the performances of three line feeding modes used in the automotive sector: line stocking vs. kitting vs. sequencing. International Journal of Production Research 53:5, pages 1439-1459.
Read now
Read now
Robin Hanson & Anna Brolin. (2013) A comparison of kitting and continuous supply in in-plant materials supply. International Journal of Production Research 51:4, pages 979-992.
Read now
Read now
Articles from other publishers (24)
Syed Ahmed, Dileep Parvathaneni & Iqbal Shareef. (2023) Reorganization of inventory to improve kitting efficiency and maximize space utilization. Manufacturing Letters 35, pages 1366-1377.
Crossref
Crossref
Andreas Stark, Kenneth Ferm, Robin Hanson, Mats Johansson, Siavash Khajavi, Lars Medbo, Mikael Öhman & Jan Holmström. (2022) Hybrid digital manufacturing: Capturing the value of digitalization. Journal of Operations Management.
Crossref
Crossref
Jianyu Zhao, Yuan Zheng, Olli Seppänen, Müge Tetik & Antti Peltokorpi. (2021) Using Real-Time Tracking of Materials and Labor for Kit-Based Logistics Management in Construction. Frontiers in Built Environment 7.
Crossref
Crossref
Müge TetikAntti PeltokorpiOlli Seppänen, Mikko LeväniemiJan Holmström. (2021) Kitting Logistics Solution for Improving On-Site Work Performance in Construction Projects. Journal of Construction Engineering and Management 147:1.
Crossref
Crossref
Binghai Zhou & Zhaoxu He. (2020) A material handling scheduling method for mixed-model automotive assembly lines based on an improved static kitting strategy. Computers & Industrial Engineering 140, pages 106268.
Crossref
Crossref
Zhao Zijin, Wang Aimin & Ge Yan. (2020) Material distribution management technology of machining unit based on electronic identification. Material distribution management technology of machining unit based on electronic identification.
Patrik Fager, Martina Calzavara & Fabio Sgarbossa. (2019) Modelling time efficiency of cobot-supported kit preparation. The International Journal of Advanced Manufacturing Technology 106:5-6, pages 2227-2241.
Crossref
Crossref
Sebastian Pimminger, Werner Kurschl, Mirjam Augstein, Thomas Neumayr, Christine Ebner, Josef Altmann & Johann Heinzelreiter. 2020. Advances in Manufacturing, Production Management and Process Control. Advances in Manufacturing, Production Management and Process Control
75
85
.
Binghai Zhou & Jiahui Xu. (2018) A novel optimized cyclic part feeding system with line-integrated supermarkets. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 233:3, pages 975-987.
Crossref
Crossref
Siavash H. Khajavi, Martin Baumers, Jan Holmström, Ender Özcan, Jason Atkin, Warren Jackson & Wenwen Li. (2018) To kit or not to kit: Analysing the value of model-based kitting for additive manufacturing. Computers in Industry 98, pages 100-117.
Crossref
Crossref
Reza Vatankhah Barenji, Banu Yuksel Ozkaya & Ali Vatankhah Barenji. (2017) Quantifying the advantage of a kitting system using Petri nets: a case study in Turkey, modeling, analysis, and insights. The International Journal of Advanced Manufacturing Technology 93:9-12, pages 3677-3691.
Crossref
Crossref
A F H Fansuri, A N M Rose, N M Z Nik Mohamed & H Ahmad. (2017) The challenges of lean manufacturing implementation in kitting assembly. IOP Conference Series: Materials Science and Engineering 257, pages 012069.
Crossref
Crossref
Antonio C. Caputo, Pacifico M. Pelagagge & Paolo Salini. (2017) Modelling human errors and quality issues in kitting processes for assembly lines feeding. Computers & Industrial Engineering 111, pages 492-506.
Crossref
Crossref
Antonio Casimiro Caputo, Pacifico Marcello Pelagagge & Paolo Salini. (2017) Modeling errors in parts supply processes for assembly lines feeding. Industrial Management & Data Systems 117:6, pages 1263-1294.
Crossref
Crossref
Hendrik Van Landeghem & El-Houssaine Aghezzaf. 2016. Mass Customized Manufacturing. Mass Customized Manufacturing
55
90
.
Alain Vaillancourt. (2016) Kit management in humanitarian supply chains. International Journal of Disaster Risk Reduction 18, pages 64-71.
Crossref
Crossref
Daria Battini, Martina Calzavara, Alena Otto & Fabio Sgarbossa. (2016) The Integrated Assembly Line Balancing and Parts Feeding Problem with Ergonomics Considerations. IFAC-PapersOnLine 49:12, pages 191-196.
Crossref
Crossref
Sule Itir Satoglu & Kirac Ucan. (2015) Redesigning the material supply system of the automotive suppliers based on lean principles and an application. Redesigning the material supply system of the automotive suppliers based on lean principles and an application.
Huseyin Selcuk Kilic & Mehmet Bulent Durmusoglu. (2015) Advances in assembly line parts feeding policies: a literature review. Assembly Automation 35:1, pages 57-68.
Crossref
Crossref
Veronique Limère, Hendrik Van Landeghem & Marc Goetschalckx. (2015) A decision model for kitting and line stocking with variable operator walking distances. Assembly Automation 35:1, pages 47-56.
Crossref
Crossref
Antonio C. Caputo, Pacifico M. Pelagagge & Paolo Salini. (2015) A model for kitting operations planning. Assembly Automation 35:1, pages 69-80.
Crossref
Crossref
Johannes Sternatz. (2015) The joint line balancing and material supply problem. International Journal of Production Economics 159, pages 304-318.
Crossref
Crossref
Antonio C. Caputo, Pacifico M. Pelagagge & Paolo Salini. (2015) Modeling Errors in Kitting Processes for Assembly Lines Feeding. IFAC-PapersOnLine 48:3, pages 338-344.
Crossref
Crossref
Robin Hanson, Lars Medbo & Per Medbo. (2012) Assembly station design: a quantitative comparison of the effects of kitting and continuous supply. Journal of Manufacturing Technology Management 23:3, pages 315-327.
Crossref
Crossref