Citations (47)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (14)
Guillaume Dessevre, Jacques Lamothe, Robert Pellerin, Maha Ben Ali, Pierre Baptiste & Vincent Pomponne. (2023) Comparison of pull management policies for a divergent process with DDMRP buffers: an industrial case study. International Journal of Production Research 61:23, pages 8022-8042.
Read now
Read now
Roberto Rosario Corsini. (2023) Adaptive production control of two-product closed-loop supply chain dynamics under disruptions. Journal of Industrial and Production Engineering 40:8, pages 638-660.
Read now
Read now
Ahlam Azzamouri, Pierre Baptiste, Robert Pellerin & Guillaume Dessevre. (2023) Impact of the continuous and periodic assessment of a buffer replenishment on the DDMRP method. International Journal of Production Research 61:16, pages 5637-5658.
Read now
Read now
David Damand, Youssef Lahrichi & Marc Barth. (2023) Parameterisation of demand-driven material requirements planning: a multi-objective genetic algorithm. International Journal of Production Research 61:15, pages 5134-5155.
Read now
Read now
Roberto Rosario Corsini, Antonio Costa, Salvatore Cannella & Jose M. Framinan. (2023) Analysing the impact of production control policies on the dynamics of a two-product supply chain with capacity constraints. International Journal of Production Research 61:6, pages 1913-1937.
Read now
Read now
Guillaume Dessevre, Pierre Baptiste, Jacques Lamothe & Robert Pellerin. (2023) Visual charts produced by simulation to correlate service rate, resource utilization and DDMRP parameters. International Journal of Production Research 61:3, pages 741-753.
Read now
Read now
Raphaël Oger, Matthieu Lauras, Benoit Montreuil & Frédérick Benaben. (2022) A decision support system for strategic supply chain capacity planning under uncertainty: conceptual framework and experiment. Enterprise Information Systems 16:5.
Read now
Read now
Matthias Thürer, Nuno O. Fernandes & Mark Stevenson. (2022) Production planning and control in multi-stage assembly systems: an assessment of Kanban, MRP, OPT (DBR) and DDMRP by simulation. International Journal of Production Research 60:3, pages 1036-1050.
Read now
Read now
Gustavo Bagni, Moacir Godinho Filho, Matthias Thürer & Mark Stevenson. (2021) Systematic review and discussion of production control systems that emerged between 1999 and 2018. Production Planning & Control 32:7, pages 511-525.
Read now
Read now
Miguel Núñez-Merino, Juan Manuel Maqueira-Marín, José Moyano-Fuentes & Pedro José Martínez-Jurado. (2020) Information and digital technologies of Industry 4.0 and Lean supply chain management: a systematic literature review. International Journal of Production Research 58:16, pages 5034-5061.
Read now
Read now
Angela Patricia Velasco Acosta, Christian Mascle & Pierre Baptiste. (2020) Applicability of Demand-Driven MRP in a complex manufacturing environment. International Journal of Production Research 58:14, pages 4233-4245.
Read now
Read now
Marcello Braglia, Roberto Gabbrielli & Leonardo Marrazzini. (2020) Rolling Kanban: a new visual tool to schedule family batch manufacturing processes with kanban. International Journal of Production Research 58:13, pages 3998-4014.
Read now
Read now
Baptiste Bahu, Laurent Bironneau & Vincent Hovelaque. (2019) Compréhension du DDMRP et de son adoption : premiers éléments empiriques. Logistique & Management 27:1, pages 20-32.
Read now
Read now
Ozlem Uzun Araz, Mehmet Ali Ilgin, Ozgur Eski & Ceyhun Araz. Fuzzy demand-driven material requirements planning: a comprehensive analysis of fuzzy logic implementation in DDMRP. International Journal of Production Research 0:0, pages 1-19.
Read now
Read now
Articles from other publishers (33)
Martin Krajčovič, Gabriela Gabajová, Martin Gašo & Marek Schickerle. (2024) Parameter Setting for Strategic Buffers in Demand-Driven Material Resource Planning through Statistical Analysis and Optimisation of Buffer Levels. Applied Sciences 14:7, pages 3012.
Crossref
Crossref
Batuhan Kocaoğlu & Utkan Uluçay. (2024) Stok Yönetiminde Min/Mak, Ekonomik Sipariş Miktarı ve DDMRP Politikalarının Simülasyonla Kıyaslaması. Yönetim ve Ekonomi Dergisi 31:1, pages 27-46.
Crossref
Crossref
Matthias Thürer, Nuno O. Fernandes, Hermann Lödding & Mark Stevenson. (2024) Material flow control in make-to-stock production systems: an assessment of order generation, order release and production authorization by simulation. Flexible Services and Manufacturing Journal.
Crossref
Crossref
Nuno O. Fernandes, Nelson Guedes, Matthias Thürer, Luis P. Ferreira, P. Avila & Silvio Carmo-Silva. 2024. Information Systems and Technologies. Information Systems and Technologies
417
424
.
Roberto Rosario Corsini, Antonio Costa, Sergio Fichera & Jose M. Framinan. 2024. Flexible Automation and Intelligent Manufacturing: Establishing Bridges for More Sustainable Manufacturing Systems. Flexible Automation and Intelligent Manufacturing: Establishing Bridges for More Sustainable Manufacturing Systems
103
110
.
Nuno O. Fernandes, Nelson Guedes, Matthias Thürer, Luis P. Ferreira & Paulo Ávila. 2024. Flexible Automation and Intelligent Manufacturing: Establishing Bridges for More Sustainable Manufacturing Systems. Flexible Automation and Intelligent Manufacturing: Establishing Bridges for More Sustainable Manufacturing Systems
95
102
.
Daniela Favaretto, Alessandro Marin & Marco Tolotti. (2023) A theoretical validation of the DDMRP reorder policy. Computational Management Science 20:1.
Crossref
Crossref
Ammar Salah, Dilber Çağlar & Khaled Zoubi. (2023) The Impact of Production and Operations Management Practices in Improving Organizational Performance: The Mediating Role of Supply Chain Integration. Sustainability 15:20, pages 15140.
Crossref
Crossref
Herbert Jodlbauer, Manuel Brunner, Nadine Bachmann, Shailesh Tripathi & Matthias Thürer. (2023) Supply Chain Management: A Structured Narrative Review of Current Challenges and Recommendations for Action. Logistics 7:4, pages 70.
Crossref
Crossref
Khalil Tliba, Thierno M. L. Diallo, Olivia Penas, Romdhane Ben Khalifa, Noureddine Ben Yahia & Jean-Yves Choley. (2022) Digital twin-driven dynamic scheduling of a hybrid flow shop. Journal of Intelligent Manufacturing 34:5, pages 2281-2306.
Crossref
Crossref
Louis Duhem, Maha Benali & Guillaume Martin. (2023) Parametrization of a demand-driven operating model using reinforcement learning. Computers in Industry 147, pages 103874.
Crossref
Crossref
Youssef Lahrichi, David Damand, Marc Barth & Stéphane Mornay. (2023) A first attempt to enhance Demand-Driven Material Requirements Planning through reinforcement learning. IFAC-PapersOnLine 56:2, pages 1797-1802.
Crossref
Crossref
Guillaume Martin, Matthieu Lauras & Pierre Baptiste. (2023) Dynamical multi-parameter sizing of DDMRP buffers in finite capacity flow-shops. Computers & Industrial Engineering 175, pages 108858.
Crossref
Crossref
Beatrice Marchi, Ivan Ferretti & Simone Zanoni. 2023. Advances in Production Management Systems. Production Management Systems for Responsible Manufacturing, Service, and Logistics Futures. Advances in Production Management Systems. Production Management Systems for Responsible Manufacturing, Service, and Logistics Futures
750
764
.
Truong Thi Phuc & Phan Thi Mai Ha. 2023. Proceedings of the 3rd Annual International Conference on Material, Machines and Methods for Sustainable Development (MMMS2022). Proceedings of the 3rd Annual International Conference on Material, Machines and Methods for Sustainable Development (MMMS2022)
221
228
.
Youssef Lahrichi, David Damand & Marc Barth. (2022) A first MILP model for the parameterization of Demand-Driven MRP. Computers & Industrial Engineering 174, pages 108769.
Crossref
Crossref
Yady Gianela Valdivia-Silva, Byron Alberto Marin-Asenjo & John Fernando Maradiegue-Tuesta. (2022) Define profiles and level of buffersOperations Improvement and Inventory Reduction for an Artisanal Chocolate Business using Aggregate Planning and DDMRP. Define profiles and level of buffersOperations Improvement and Inventory Reduction for an Artisanal Chocolate Business using Aggregate Planning and DDMRP.
Vimal Kumar, Pratima Verma, Ajay Jha, Kuei-Kuei Lai & Manh-Hoang Do. (2020) Dynamics of a medium value consumer apparel supply chain key parameters. International Journal of Productivity and Performance Management 71:2, pages 445-476.
Crossref
Crossref
Andres Mauricio Paredes Rodriguez, Kevin Alexander Ciro Jaramillo & José Daniel Jaramillo Ceballos. (2022) Simulación de una política de inventario basada en la metodología Demand Driven MRP desde un enfoque de redes de Petri. Ingeniería 27:1, pages e18002.
Crossref
Crossref
David Damand, Youssef Lahrichi & Marc Barth. (2022) A simulation-optimization approach to parameterize Demand-Driven Material Requirements Planning. IFAC-PapersOnLine 55:10, pages 263-268.
Crossref
Crossref
Abdelhalim Achergui, Hamid Allaoui & Tiente Hsu. (2022) Demand Driven MRP with supplier selection. IFAC-PapersOnLine 55:10, pages 257-262.
Crossref
Crossref
Daeli Franco-Quispe, Diana Yauri-Tito, Jhonatan Cabel-Pozo & Carlos Raymundo. 2022. Human Interaction, Emerging Technologies and Future Systems V. Human Interaction, Emerging Technologies and Future Systems V
1209
1217
.
Xiaodie Pu, Meng Chen, Zhao Cai, Alain Yee-Loong Chong & Kim Hua Tan. (2021) Managing emergency situations with lean and advanced manufacturing technologies: an empirical study on the Rumbia typhoon disaster. International Journal of Operations & Production Management 41:9, pages 1442-1468.
Crossref
Crossref
Hana Marita Iki & Dendi Ishak. (2021) Development of Forecasting Model with Simple Smoothing and Inventory Model with DDMRP in Veterinary Medicine Industry. Development of Forecasting Model with Simple Smoothing and Inventory Model with DDMRP in Veterinary Medicine Industry.
Ahmed Abideen & Fazeeda Binti Mohamad. (2020) Improving the performance of a Malaysian pharmaceutical warehouse supply chain by integrating value stream mapping and discrete event simulation. Journal of Modelling in Management 16:1, pages 70-102.
Crossref
Crossref
Herman Tang. 2021. Engineering Research. Engineering Research
171
211
.
Khalil Tliba, Olivia Penas, Thierno M. L Diallo, Romdhane Ben Khalifa, Noureddine Ben Yahia & Jean-Yves Choley. (2020) Model Based Systems Engineering approach for the improvement of manufacturing system flexibility. Model Based Systems Engineering approach for the improvement of manufacturing system flexibility.
A. Orue, A. Lizarralde & A. Kortabarria. (2020) Demand Driven MRP – The need to standardise an implementation process.. International Journal of Production Management and Engineering 8:2, pages 65.
Crossref
Crossref
R.B. Seno Wulung & M. Zainuddin Rifai. (2020) Minimize the Solid Waste by Reducing the Rubber Compound Consumption in the Outsole Manufacturing Company. Applied Mechanics and Materials 898, pages 39-44.
Crossref
Crossref
Tomasz Rokicki & Paulina Ziółkowska. (2020) Integrated IT systems in logistics company management. Ekonomika i Organizacja Logistyki 5:1, pages 55-64.
Crossref
Crossref
Jean Vidal, Matthieu Lauras, Jacques Lamothe & Romain Miclo. (2020) Toward an Aggregate Approach for Supporting Adaptive Sales And Operations Planning. Toward an Aggregate Approach for Supporting Adaptive Sales And Operations Planning.
K Flores-Andrade, R Guardia-Miranda, P Castro-Rangel, C Raymundo-Ibañez & M Perez. (2020) Production management model through MPS and line balancing to reduce the non-fulfillment of orders in lingerie clothing MSEs in Peru. IOP Conference Series: Materials Science and Engineering 796:1, pages 012018.
Crossref
Crossref
Daniela Favaretto & Alessandro Marin. (2018) An Empirical Comparison Study Between DDMRP and MRP in Material Management. SSRN Electronic Journal.
Crossref
Crossref