Citations (112)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (18)
Dirk Banhart, Shafiul Monir, Olivier Durieux, Richard J. Day, Martyn Jones, Nataliia Luhyna & Yuriy Vagapov. (2024) A review of experimental and numerical methodologies for impact testing of composite materials. Sensing Technology 2:1.
Read now
Read now
G.C.G. Serra, P.N.B. Reis & J.A.M. Ferreira. (2023) Effect of cure temperature on the mechanical properties of epoxy-aluminium single lap joints. The Journal of Adhesion 99:9, pages 1441-1455.
Read now
Read now
Wei Feng, Fei Xu, Zhouyi Li & Chao Zhang. (2023) Mode Ι fracture toughness of adhesively bonded composite joints under high loading rate conditions. The Journal of Adhesion 99:5, pages 893-909.
Read now
Read now
Nidhal Naat, Yasmina Boutar, Sami Naïmi, Salah Mezlini & Lucas Filipe Martins Da Silva. (2023) Effect of surface texture on the mechanical performance of bonded joints: a review. The Journal of Adhesion 99:2, pages 166-258.
Read now
Read now
Wei Tan, Na Jingxin, Wang Guangbin, Hongli Chen & Huan Meng. (2022) Effect of temperature on the fatigue performance and failure mechanism of a flexible adhesive butt joint. The Journal of Adhesion 98:13, pages 1998-2028.
Read now
Read now
M.A. Martínez, S. López de Armentia & J. Abenojar. (2021) Influence of sample dimensions on single lap joints: effect of interactions between parameters. The Journal of Adhesion 97:14, pages 1358-1369.
Read now
Read now
Wang Guo, Peijian Chen, Hao Liu, Yugui Yang, Guangjian Peng & Zhitong Chen. (2021) On the strength and interfacial properties of square wave joints with defects and mismatches. The Journal of Adhesion 97:13, pages 1211-1233.
Read now
Read now
K. Houjou, K. Shimamoto, H. Akiyama & C. Sato. (2021) Dependence of fatigue limit on stress ratio and influence of cyclic stress on shear strength for an adhesive lap joint. The Journal of Adhesion 97:12, pages 1153-1165.
Read now
Read now
A. Chiminelli, C. Valero, M. Lizaranzu, C. I. López & M. Canales. (2019) Modelling of bonded joints with flexible adhesives. The Journal of Adhesion 95:5-7, pages 369-384.
Read now
Read now
Nathalie Minako Ito, Renato Altobelli Antunes, Fernanda de Sá Teixeira, Maria Cecília Salvadori & Demetrio Jackson dos Santos. (2018) The peeling resistance of flexible laminated food packaging: Roles of the NCO:OH ratio and aluminum surface aging times. The Journal of Adhesion 94:10, pages 784-798.
Read now
Read now
J. J. M. Machado, E. A. S. Marques & Lucas F. M. da Silva. (2018) Adhesives and adhesive joints under impact loadings: An overview. The Journal of Adhesion 94:6, pages 421-452.
Read now
Read now
N. Pausan, Y. Liu, Y. Lu & A. R. Hutchinson. (2017) The use of expandable graphite as a disbonding agent in structural adhesive joints. The Journal of Adhesion 93:10, pages 791-810.
Read now
Read now
P. N. B. Reis, A. M. Pereira, J. A. M. Ferreira & J. D. M. Costa. (2017) Cyclic creep response of adhesively bonded steel lap joints. The Journal of Adhesion 93:9, pages 704-715.
Read now
Read now
S. O. Olajide, E. Kandare & A. Afaghi Khatibi. (2017) Fatigue life uncertainty of adhesively bonded composite scarf joints – an airworthiness perspective. The Journal of Adhesion 93:7, pages 515-530.
Read now
Read now
A. M. Pereira, P. N. B. Reis & J. A. M. Ferreira. (2017) Effect of the mean stress on the fatigue behaviour of single lap joints. The Journal of Adhesion 93:6, pages 504-513.
Read now
Read now
V. Fiore, L. Calabrese, E. Proverbio, G. Galtieri, T. Scalici, V. M. Lo Presti & A. Valenza. (2016) Pull-off adhesion of hybrid glass-steel adhesive joints in salt fog environment. Journal of Adhesion Science and Technology 30:19, pages 2157-2174.
Read now
Read now
M. D. Banea, L. F. M. da Silva & R. D. S. G. Campilho. (2015) The Effect of Adhesive Thickness on the Mechanical Behavior of a Structural Polyurethane Adhesive. The Journal of Adhesion 91:5, pages 331-346.
Read now
Read now
Wei Xu & Yueguang Wei. (2013) Assessments for impact of adhesive properties: modeling strength of metallic single lap joints. Journal of Adhesion Science and Technology 27:1, pages 9-29.
Read now
Read now
Articles from other publishers (94)
F. J. Simón-Portillo, O. Cuadrado, E. A. S. Marques, M. Sánchez-Lozano & Lucas F. M. da Silva. 2024. 7th International Conference on Structural Adhesive Bonding 2023. 7th International Conference on Structural Adhesive Bonding 2023
15
24
.
Safa Ak & Mürsel Ekrem. 2024. Solutions for Maintenance Repair and Overhaul. Solutions for Maintenance Repair and Overhaul
467
474
.
Pedro Henrique Evangelista Fernandes, Christof Nagel, Andreas Wulf, Vinicius Carrillo Beber & Bernd Mayer. (2023) Compliance-Based Determination of Fatigue Design Curves for Elastomeric Adhesive Joints. Eng 4:4, pages 2615-2639.
Crossref
Crossref
Ali Nemati Giv, Zhuo Chen, Qiuni Fu, Thorsten Leusmann, Libo Yan, Dirk Lowke & Bohumil Kasal. (2023) Bending behavior and bond analysis on adhesively bonded glulam-concrete panels fabricated with wet bonding technique. Journal of Building Engineering 76, pages 107140.
Crossref
Crossref
Ali Sadık & Filiz Karabudak. (2023) Strength Analysis in Bonded, Bolted and Bolted-Bonded Joints, Single Lap Joints, Metal/Composite Plates. Applied Sciences 13:18, pages 10476.
Crossref
Crossref
Georgino C. G. Serra, José A. M. Ferreira & Paulo N. B. Reis. (2023) Static and Fatigue Characterization of Adhesive T-Joints Involving Different Adherends. Processes 11:9, pages 2640.
Crossref
Crossref
Liu Bo, Yang Jian, Tang Yongxin, Zhang Jinsheng, Yang Qin, Gao Cong & Feng Gang. (2023) Experimental study on structural adhesive properties of aluminum plate and carbon fiber-reinforced polymer heterogeneous materials. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering.
Crossref
Crossref
Nitish Kumar, Subrata Kumar & Shashi Prakash. (2022) Underwater laser texturing for enhanced adhesive joint bonding strength of Al-Mg alloy. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 237:10, pages 1461-1472.
Crossref
Crossref
Shashi Prakash. (2023) Comparison of adhesive joint strength of laser fabricated dimple textured Al–Mg alloy in different environment. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, pages 095440892311541.
Crossref
Crossref
A. Benelli, R. Ciardiello, C. Boursier Niutta & L. Goglio. (2023) Experimental and numerical characterization of adhesive joints with composite substrates by means of the Arcan test. International Journal of Adhesion and Adhesives 122, pages 103321.
Crossref
Crossref
Peer Schrader, Dennis Domladovac & Stephan Marzi. (2023) Influence of Loading Rate on the Cohesive Traction for Soft, Rubber-Like Adhesive Layers Loaded in Modes I and III. Processes 11:2, pages 356.
Crossref
Crossref
Keita SATO, Keishi OYAMA, Taketoshi KOITA, Akiko KUBOTA & Chiharu TOKORO. (2023) Applicability of Immersion Pretreatment to Easy Disassembly of Adhesive Joints接着接合の易解体における浸漬前処理の有効性評価. Resources Processing 70:2, pages 65-72.
Crossref
Crossref
WenLong Mu, QianHui Xu, Jingxin Na, Yisa Fan, Yufeng Sun & Yang Liu. (2023) Investigating the failure behavior of hygrothermally aged adhesively bonded CFRP-aluminum alloy joints using modified Arcan fixture. Thin-Walled Structures 182, pages 110303.
Crossref
Crossref
Fabien Choffat, Antonio Corsaro, Claudio Di Fratta & Steffen Kelch. 2023. Advances in Structural Adhesive Bonding. Advances in Structural Adhesive Bonding
103
136
.
Tanja Denise Singewald, Thomas Maximillian Bruckner, Ralph Gruber, Gabriela Schimo-Aichhorn, Laura Hader-Kregl, Sascha Andronescu, Michael Klotz, Mathias Müller, Carina Kern, Martin Rosner, Gerald Luckeneder, Karl-Heinz Stellnberger, Bernhard Strauß, Martina Hafner & Markus Valtiner. (2022) Systematic variation of inorganic additives and their impact on interfacial delamination processes of automotive coating systems. Progress in Organic Coatings 173, pages 107172.
Crossref
Crossref
M. Ortega-Iguña, A. Akhavan-Safar, R.C.J. Carbas, J.M. Sánchez-Amaya, M. Chludzinski & L.F.M. da Silva. (2022) Use of seawater to improve the static strength and fatigue life of bonded coated steel joints. Polymer Degradation and Stability 206, pages 110169.
Crossref
Crossref
Stefano Bruni, Preetum J Mistry, Michael S Johnson, Andrea Bernasconi, Michele Carboni, Davide Formaggioni, Guido Carra, Sergio Macchiavello, Edoardo Ferrante, Ingo Kaiser, Jordi Viñolas & Irene Marazzi. (2022) A vision for a lightweight railway wheelset of the future. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit 236:10, pages 1179-1197.
Crossref
Crossref
Geonwoo Jeon, Dongwoog Ha, Yunmin Park & Changyeol Jeong. (2022) Three-Point Bending Properties of Hybrid Multi-Materials Using Adhesive Bonding Dependent on Strength Difference between Steel and Aluminum. Materials 15:9, pages 3328.
Crossref
Crossref
Hamid Reza Ghanbari, Mahmoud Shariati, Elahe Sanati & Reza Masoudi Nejad. (2022) Effects of spot welded parameters on fatigue behavior of ferrite-martensite dual-phase steel and hybrid joints. Engineering Failure Analysis 134, pages 106079.
Crossref
Crossref
Peer Schrader, Christopher Schmandt & Stephan Marzi. (2022) Mode I creep fracture of rubber-like adhesive joints at constant crack driving force. International Journal of Adhesion and Adhesives 113, pages 103079.
Crossref
Crossref
Tanja Denise Singewald, Thomas Maximillian Bruckner, Ralph Gruber, Gabriela Schimo-Aichhorn, Laura Hader-Kregl, Sascha Poeller, Mathias Mueller, Carina Kern, Gerald Luckeneder, Karl-Heinz Stellnberger, Bernhard Strauß, Martina Hafner & Markus Valtiner. (2022) Water-uptake in hollow glass microspheres and their influence on cathodic and anodic delamination along the polymer/metal-interface. Corrosion Science 196, pages 110045.
Crossref
Crossref
Mehmet Emin Çetin. (2022) Improvement of the structural, thermal, and mechanical properties of polyurethane adhesives with nanoparticles and their application to Al/Al honeycomb sandwich panels. Materials Testing 64:2, pages 272-283.
Crossref
Crossref
Mohamed Mustafa Abdul Kader & Govindarasu Jeevi. 2022. Encyclopedia of Materials: Plastics and Polymers. Encyclopedia of Materials: Plastics and Polymers
353
365
.
Yasmina Boutar, Sami Naïmi, Salah Mezlini, Ricardo João Camilo Carbas, Lucas Filipe Martins Da Silva & Moez Ben Sik Ali. 2022. Advances in Mechanical Engineering and Mechanics II. Advances in Mechanical Engineering and Mechanics II
383
390
.
Sofia Maggiore, Mariana D. Banea, Paola Stagnaro & Giorgio Luciano. (2021) A Review of Structural Adhesive Joints in Hybrid Joining Processes. Polymers 13:22, pages 3961.
Crossref
Crossref
Sara Dasilva, Alberto Jimenez-Suarez, Elena Rodríguez & Silvia G. Prolongo. (2021) Quality assessment and structural health monitoring of CNT reinforced CFRP and Ti6Al4V multi-material joints. Materials & Design 210, pages 110118.
Crossref
Crossref
A.W. Momber, L. Fröck & T. Marquardt. (2021) Effects of adhesive type on the mechanical properties of adhesive joints between polyurethane top coats and polyurethane-based adhesives after accelerated atmospheric ageing. Marine Structures 79, pages 103022.
Crossref
Crossref
Francesco Marchione & Placido Munafò. (2021) Influence of high temperature exposure on the mechanical performance of double-lap adhesive joints between glass and aluminium adherends. Construction and Building Materials 299, pages 124268.
Crossref
Crossref
Haichao Liu, Yisa Fan & Han Peng. (2021) Effect of Full Temperature Field Environment on Bonding Strength of Aluminum Alloy. Crystals 11:6, pages 657.
Crossref
Crossref
Yasmina Boutar, Sami Naïmi, Salah Mezlini, Ricardo J.C. Carbas, Lucas F.M. da Silva & Moez Ben Sik Ali. (2021) Cyclic fatigue testing: Assessment of polyurethane adhesive joints' durability for bus structures' aluminium assembly. Journal of Advanced Joining Processes 3, pages 100053.
Crossref
Crossref
Francesco Marchione. (2021) Stress distribution in double-lap adhesive joints: Effect of adherend reinforcement layer. International Journal of Adhesion and Adhesives 105, pages 102780.
Crossref
Crossref
Lakshmana Rao Bhagavathi, Abhijit P. Deshpande, G.D. Janaki Ram & S.K. Panigrahi. (2021) Hygrothermal aging, fatigue and dynamic mechanical behavior of cellulosic particles reinforced one-component moisture curable polyurethane adhesive joints. International Journal of Adhesion and Adhesives 105, pages 102771.
Crossref
Crossref
Pedram Zamani, Abdolrahman Jaamialahmadi & Lucas F.M. da Silva. (2021) The influence of GNP and nano-silica additives on fatigue life and crack initiation phase of Al-GFRP bonded lap joints subjected to four-point bending. Composites Part B: Engineering 207, pages 108589.
Crossref
Crossref
Joana Filipa Dias Varajão, Ricardo João Camilo Carbas, Eduardo André Sousa Marques & Lucas Filipe Martins da Silva. 2021. 6th International Conference on Adhesive Bonding 2021. 6th International Conference on Adhesive Bonding 2021
127
142
.
Miroslav Müller, Martin Tichý, Vladimír Šleger, Monika Hromasová & Viktor Kolář. (2020) Research of hybrid adhesive bonds with filler based on coffee bean powder exposed to cyclic loading. Manufacturing Technology 20:5, pages 646-654.
Crossref
Crossref
Junying Min, Hailang Wan, Blair E. Carlson, Jianping Lin & Chengcheng Sun. (2020) Application of laser ablation in adhesive bonding of metallic materials: A review. Optics & Laser Technology 128, pages 106188.
Crossref
Crossref
Wonbo Shim, Jinhyeok Jang, Jae-Hyuk Choi, Jeong-Min Cho, Sang-Jae Yoon, Chi-Hoon Choi & Woong-Ryeol Yu. (2020) Simulating rate- and temperature-dependent behaviors of adhesives using a nonlinear viscoelastic model. Mechanics of Materials 147, pages 103446.
Crossref
Crossref
Gyeong-Seok Chae, Hee-Woong Park, Jung-Hyun Lee & Seunghan Shin. (2020) Comparative Study on the Impact Wedge-Peel Performance of Epoxy-Based Structural Adhesives Modified with Different Toughening Agents. Polymers 12:7, pages 1549.
Crossref
Crossref
Min You, Ming-Bo Li, You-Lu Yuan, Gao Lin, Fu-Wei Ma, Ling-Feng Du & Shan-Jie Tang. (2020) Review of experimental techniques for impact property of adhesive bonds. International Journal of Adhesion and Adhesives 100, pages 102620.
Crossref
Crossref
Jingru Ni, Junying Min, Hailang Wan, Jianping Lin, Shuang Wang & Qingmian Wan. (2020) Effect of adhesive type on mechanical properties of galvanized steel/SMC adhesive-bonded joints. International Journal of Adhesion and Adhesives 97, pages 102482.
Crossref
Crossref
B.N.V.S. Ganesh Gupta K, Mritunjay Maharudrayya Hiremath, Abhinav Omprakash Fulmali, Rajesh Kumar Prusty & Bankim Chandra Ray. (2020) Investigation of adhesively bonded multi-material joints: An assessment on joint efficiency and fracture morphology. Materials Today: Proceedings 27, pages 1180-1185.
Crossref
Crossref
Pedram Zamani, Abdolrahman Jaamialahmadi, Lucas F.M. da Silva & Khalil Farhangdoost. (2019) An investigation on fatigue life evaluation and crack initiation of Al-GFRP bonded lap joints under four-point bending. Composite Structures 229, pages 111433.
Crossref
Crossref
Humberto Brito-Santana, José Luís Medeiros Thiesen, Ricardo de Medeiros, Antonio Joaquim Mendes Ferreira, Reinaldo Rodríguez-Ramos & Volnei Tita. (2019) Multiscale analysis for predicting the constitutive tensor effective coefficients of layered composites with micro and macro failures. Applied Mathematical Modelling 75, pages 250-266.
Crossref
Crossref
Gyu-Hyeong Lim, Mohammad Heidari-Rarani, Kobye Bodjona, Karthik Prasanna Raju, Valentin Romanov & Larry Lessard. (2019) Mechanical characterization of a flexible epoxy adhesive for the design of hybrid bonded-bolted joints. Polymer Testing 79, pages 106048.
Crossref
Crossref
Bin Du, Kenan Yang, Rubai Luo, Huailin Li, Shisheng Zhou & Yubin Liu. (2019) Reinforcement of Bisphenol-A epoxy resin nanocomposites with noncovalent functionalized and physical adsorption modified CNTs. Materials Research Express 6:10, pages 105623.
Crossref
Crossref
Xiangyang Huang, Xingyu Liu, Chunsheng Song, Feng Jiang, Youliang Jiang & Zude Zhou. (2019)
Damage detection of carbon fiber reinforced plastic
π
adhesive-bonded joints based on the peeling stress reconstruction with hybrid artificial fish swarm and frog leaping algorithm
. Advances in Mechanical Engineering 11:4, pages 168781401984178.
Crossref
Crossref
Peijian Chen, Wang Guo, Yucheng Zhao, Erxia Li, Yugui Yang & Hao Liu. (2019) Numerical analysis of the strength and interfacial properties of adhesive joints with graded adherends. International Journal of Adhesion and Adhesives 90, pages 88-96.
Crossref
Crossref
Şakir Yazman & Ahmet Samancı. (2018) A Comparative Study on the Effect of CNT or Alumina Nanoparticles on the Tensile Properties of Epoxy Nanocomposites. Arabian Journal for Science and Engineering 44:2, pages 1353-1363.
Crossref
Crossref
JJM Machado, EAS Marques & LFM da Silva. (2018) Mechanical behaviour of adhesively bonded composite single lap joints under quasi-static and impact conditions with variation of temperature and overlap. Journal of Composite Materials 52:26, pages 3621-3635.
Crossref
Crossref
X Shang, EAS Marques, JJM Machado, RJC Carbas, D Jiang & LFM da Silva. (2018) A strategy to reduce delamination of adhesive joints with composite substrates. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, pages 146442071880571.
Crossref
Crossref
J.J.M. Machado, E.A.S. Marques, M.R.G. Silva & Lucas F.M. da Silva. (2018) Numerical study of impact behaviour of mixed adhesive single lap joints for the automotive industry. International Journal of Adhesion and Adhesives 84, pages 92-100.
Crossref
Crossref
N. Argoud, J. Rousseau, B. Piezel, A. Chettah, T. Cadu, A. Fiore & S. Fontaine. (2018) Multi-axial testing of thick adhesive bonded joints of fibre reinforced thermoplastic polymers. International Journal of Adhesion and Adhesives 84, pages 37-47.
Crossref
Crossref
Christopher Schmandt & Stephan Marzi. (2018) Effect of crack opening velocity and adhesive layer thickness on the fracture behaviour of hyperelastic adhesive joints subjected to mode I loading. International Journal of Adhesion and Adhesives 83, pages 9-14.
Crossref
Crossref
H. Paul, N. Ledford, M. Sauer, M. May & M. Okamura. (2018) Assessment of test methods for thick and thin layer adhesive joints under high rates of loading. International Journal of Adhesion and Adhesives 83, pages 123-129.
Crossref
Crossref
Y. Boutar, S. Naïmi, S. Mezlini, R.J.C. Carbas, L.F.M. da Silva & M. Ben Sik Ali. (2018) Fatigue resistance of an aluminium one-component polyurethane adhesive joint for the automotive industry: Effect of surface roughness and adhesive thickness. International Journal of Adhesion and Adhesives 83, pages 143-152.
Crossref
Crossref
Jingchuan Li, Lihong Liang, Xiaoming Liu, Hansong Ma, Jingru Song & Yueguang Wei. (2018) Experimental Studies on Strengthening and Failure Mechanism for the Metal/Silicone Rubber/Metal Bonding System. International Journal of Applied Mechanics 10:03, pages 1850029.
Crossref
Crossref
Gyu-Hyeong Lim, Kobye Bodjona, Karthik Prasanna Raju, Sean Fielding, Valentin Romanov & Larry Lessard. (2018) Evolution of mechanical properties of flexible epoxy adhesives under cyclic loading and its effects on composite hybrid bolted/bonded joint design. Composite Structures 189, pages 54-60.
Crossref
Crossref
J.J.M. Machado, P.M.-R. Gamarra, E.A.S. Marques & Lucas F.M. da Silva. (2018) Improvement in impact strength of composite joints for the automotive industry. Composites Part B: Engineering 138, pages 243-255.
Crossref
Crossref
Christopher Schmandt & Stephan Marzi. (2018) Effect of crack opening velocity on fracture behavior of hyperelastic semi-structural adhesive joints subjected to mode I loading. Procedia Structural Integrity 13, pages 799-805.
Crossref
Crossref
Yasmina Boutar, Sami Naïmi, Taieb Daami, Salah Mezlini, Lucas F. M. da Silva & Moez Ben Sik Ali. 2018. Design and Modeling of Mechanical Systems—III. Design and Modeling of Mechanical Systems—III
393
403
.
Ngoc San Ha, Thanh Duc Dao, Nam Seo Goo, Jae Kwak & Soonwan Chung. (2017) Adhesion strength characterization for different frame materials of handheld products. Journal of Mechanical Science and Technology 31:10, pages 4795-4804.
Crossref
Crossref
U.T.F. Carvalho & R.D.S.G. Campilho. (2017) Validation of pure tensile and shear cohesive laws obtained by the direct method with single-lap joints. International Journal of Adhesion and Adhesives 77, pages 41-50.
Crossref
Crossref
H.A.M. Araújo, J.J.M. Machado, E.A.S. Marques & L.F.M. da Silva. (2017) Dynamic behaviour of composite adhesive joints for the automotive industry. Composite Structures 171, pages 549-561.
Crossref
Crossref
Jean-Baptiste Sauvage, Maëlenn Aufray, Jean-Pierre Jeandrau, Pierre Chalandon, Dominique Poquillon & Michel Nardin. (2017) Using the 3-point bending method to study failure initiation in epoxide-aluminum joints. International Journal of Adhesion and Adhesives 75, pages 181-189.
Crossref
Crossref
Yasmina Boutar, Sami Naïmi, Salah Mezlini, Lucas F.M. da Silva & Moez Ben Sik Ali. (2017) Characterization of aluminium one-component polyurethane adhesive joints as a function of bond thickness for the automotive industry: Fracture analysis and behavior. Engineering Fracture Mechanics 177, pages 45-60.
Crossref
Crossref
Debabrata Payra, Yoshihisa Fujii, Sandip Das, Junko Takaishi & Masanobu Naito. (2017) Rational design of a biomimetic glue with tunable strength and ductility. Polymer Chemistry 8:10, pages 1654-1663.
Crossref
Crossref
S. Budhe, M.D. Banea, S. de Barros & L.F.M. da Silva. (2017) An updated review of adhesively bonded joints in composite materials. International Journal of Adhesion and Adhesives 72, pages 30-42.
Crossref
Crossref
R. Avendaño, R. J. C. Carbas, F. J. P. Chaves, M. Costa, L. F. M. da Silva & A. A. Fernandes. (2016) Impact Loading of Single Lap Joints of Dissimilar Lightweight Adherends Bonded With a Crash-Resistant Epoxy Adhesive. Journal of Engineering Materials and Technology 138:4.
Crossref
Crossref
R. Avendaño, R.J.C. Carbas, E.A.S. Marques, L.F.M. da Silva & A.A. Fernandes. (2016) Effect of temperature and strain rate on single lap joints with dissimilar lightweight adherends bonded with an acrylic adhesive. Composite Structures 152, pages 34-44.
Crossref
Crossref
Hengchang Nie, Jifeng Xu, Zhidong Guan, Qian Wang & Zengshan Li. (2016) Tensile behaviors after impact of composite scarf joints. Tensile behaviors after impact of composite scarf joints.
S. Murakami, Y. Sekiguchi, C. Sato, E. Yokoi & T. Furusawa. (2016) Strength of cylindrical butt joints bonded with epoxy adhesives under combined static or high-rate loading. International Journal of Adhesion and Adhesives 67, pages 86-93.
Crossref
Crossref
M. R. G. Silva, E. A. S. Marques & Lucas. F. M. da Silva. (2016) Behaviour under Impact of Mixed Adhesive Joints for the Automotive Industry. Latin American Journal of Solids and Structures 13:5, pages 835-853.
Crossref
Crossref
K. Hasegawa, A.D. Crocombe, F. Coppuck, D. Jewell & S. Maher. (2015) Characterising bonded joints with a thick and flexible adhesive layer. Part 2: Modelling and prediction of structural joint responses. International Journal of Adhesion and Adhesives 63, pages 158-165.
Crossref
Crossref
K. Hasegawa, A.D. Crocombe, F. Coppuck, D. Jewel & S. Maher. (2015) Characterising bonded joints with a thick and flexible adhesive layer–Part 1: Fracture testing and behaviour. International Journal of Adhesion and Adhesives 63, pages 124-131.
Crossref
Crossref
Heather J. Meredith & Jonathan J. Wilker. (2015) The Interplay of Modulus, Strength, and Ductility in Adhesive Design Using Biomimetic Polymer Chemistry. Advanced Functional Materials 25:31, pages 5057-5065.
Crossref
Crossref
M. Sonato, A. Piccolroaz, W. Miszuris & G. Mishuris. (2015) General transmission conditions for thin elasto-plastic pressure-dependent interphase between dissimilar materials. International Journal of Solids and Structures 64-65, pages 9-21.
Crossref
Crossref
E Kara, A Kurşun, MR Haboğlu, HM Enginsoy & H Aykul. (2015) Fatigue behavior of adhesively bonded glass fiber reinforced plastic composites with different overlap lengths. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 229:7, pages 1292-1299.
Crossref
Crossref
Shota Hayashida, Toru Sugaya, Satoshi Kuramoto, Chiaki Sato, Arata Mihara & Takashi Onuma. (2015) Impact strength of joints bonded with high-strength pressure-sensitive adhesive. International Journal of Adhesion and Adhesives 56, pages 61-72.
Crossref
Crossref
Ferhat Kadioglu & Robert D. Adams. (2015) Flexible adhesives for automotive application under impact loading. International Journal of Adhesion and Adhesives 56, pages 73-78.
Crossref
Crossref
M.D. Banea, L.F.M. da Silva, R.J.C Carbas & R.D.S.G. Campilho. (2014) Mechanical and thermal characterization of a structural polyurethane adhesive modified with thermally expandable particles. International Journal of Adhesion and Adhesives 54, pages 191-199.
Crossref
Crossref
Lijuan Liao, Toshiyuki Sawa & Chenguang Huang. (2014) Numerical analysis on load-bearing capacity and damage of double scarf adhesive joints subjected to combined loadings of tension and bending. International Journal of Adhesion and Adhesives 53, pages 65-71.
Crossref
Crossref
Wei Xu, Huichen Yu & Chunhu Tao. (2014) Influence of randomly distributed adhesive properties on the overall mechanical response of metallic adhesively bonded joints. International Journal of Adhesion and Adhesives 52, pages 48-56.
Crossref
Crossref
R. Créac'hcadec, G. Jamin, J.Y. Cognard & P. Jousset. (2014) Experimental analysis of the mechanical behaviour of a thick flexible adhesive under tensile/compression-shear loads. International Journal of Adhesion and Adhesives 48, pages 258-267.
Crossref
Crossref
M. Kolluri, J. P. M. Hoefnagels, J. A. W. Dommelen & M. G. D. Geers. (2013) Irreversible mixed mode interface delamination using a combined damage-plasticity cohesive zone enabling unloading. International Journal of Fracture 185:1-2, pages 77-95.
Crossref
Crossref
Wenyan Wu, Qiang Liu, Zhijian Zong, Guangyong Sun & Qing Li. (2013) Experimental investigation into transverse crashworthiness of CFRP adhesively bonded joints in vehicle structure. Composite Structures 106, pages 581-589.
Crossref
Crossref
Haider Al-Zubaidy, Riadh Al-Mahaidi & Xiao-Ling Zhao. (2013) Finite element modelling of CFRP/steel double strap joints subjected to dynamic tensile loadings. Composite Structures 99, pages 48-61.
Crossref
Crossref
Sérgio Henrique Pezzin, Luiz Antonio Ferreira Coelho, Sandro Campos Amico & Luiz Cláudio Pardini. 2013. Structural Materials and Processes in Transportation. Structural Materials and Processes in Transportation
205
236
.
G. Di Bella, G. Galtieri, E. Pollicino & C. Borsellino. (2013) Mechanical characterization of adhesive joints with dissimilar substrates for marine applications. International Journal of Adhesion and Adhesives 41, pages 33-40.
Crossref
Crossref
Lucas F. M. da Silva, Stefanos Giannis, Robert D. Adams, Edoardo Nicoli, Jean‐Yves Cognard, Romain Créac'hcadec, Bamber R. K. Blackman, Hitendra K. Singh, Charles E. Frazier, Laurent Sohier & Bernard Gineste. 2012. Testing Adhesive Joints. Testing Adhesive Joints
1
77
.
Mariana D. Banea, Lucas F.M. da Silva & Raul D.S.G. Campilho. (2012) Moulds design for adhesive bulk and joint specimens manufacturing. Assembly Automation 32:3, pages 284-292.
Crossref
Crossref
C. Galliot, J. Rousseau & G. Verchery. (2012) Drop weight tensile impact testing of adhesively bonded carbon/epoxy laminate joints. International Journal of Adhesion and Adhesives 35, pages 68-75.
Crossref
Crossref
Wei Xu & Yueguang Wei. (2012) Strength and interface failure mechanism of adhesive joints. International Journal of Adhesion and Adhesives 34, pages 80-92.
Crossref
Crossref
Wei Xu & Yueguang Wei. (2012) Strength analysis of metallic bonded joints containing defects. Computational Materials Science 53:1, pages 444-450.
Crossref
Crossref
Rinsei IKEDA, Tsuyoshi MATSUMOTO, Masaaki KIMURA, Toshitaka SATSUTA & Hatsuhiko OIKAWA. (2011) Resistance Welding, Explosive Joining, Roll Bonding, Magnetic Bonding, Adhesive Bonding, Mechanical Joining and Other Joining Techniques. JOURNAL OF THE JAPAN WELDING SOCIETY 80:5, pages 450-453.
Crossref
Crossref