Citations (165)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (30)
J. Bühring, J. Zimmermann, M.Z. Sadeghi, A. Akhavan-Safar, L.F.M. Da Silva & K.-U. Schröder. (2024) Experimental and numerical investigation of adhesively bonded additive manufactured sandwich structures with a pyramidal lattice core. The Journal of Adhesion 100:5, pages 323-339.
Read now
Read now
L. Bergonzi, A. Pirondi, F. Moroni, M. Frascio & M. Avalle. (2024) A study on additive manufacturing build parameters as bonded joint design factors. The Journal of Adhesion 100:5, pages 576-605.
Read now
Read now
Qian Liu, Mengna Tao, Jingyan Yu, Yun Zou & Zhemin Jia. (2024) Effect of graphene nanoplatelets on mode I fracture Toughness of epoxy adhesives under water aging conditions. The Journal of Adhesion 100:4, pages 267-289.
Read now
Read now
Fernando Madureira, Lucas F. M. da Silva & Volnei Tita. (2023) Compliance Methods For Bonded Joints: Part I - Investigation Of The Standardized Methods To Obtain The Strain Energy Release Rate For Mode I. The Journal of Adhesion 99:11, pages 1769-1790.
Read now
Read now
B. D. Simões, P. D. P. Nunes, B. S. Henriques, E. A. S. Marques, R. J. C. Carbas & L.F.M da Silva. (2023) Determination of Mode I cohesive law of structural adhesives using the direct method. The Journal of Adhesion 99:10, pages 1650-1677.
Read now
Read now
Wei Feng, Fei Xu, Zhouyi Li & Chao Zhang. (2023) Mode Ι fracture toughness of adhesively bonded composite joints under high loading rate conditions. The Journal of Adhesion 99:5, pages 893-909.
Read now
Read now
Alireza Akhavan-Safar, Fatemeh Delzendehrooy, Majidreza Ayatollahi & Lucas Filipe Martins da Silva. (2022) Influence of Date Palm Tree Fibers on the Tensile Fracture Energy of an Epoxy-based Adhesive. Journal of Natural Fibers 19:16, pages 14379-14395.
Read now
Read now
Michal K. Budzik, Markus Wolfahrt, Paulo Reis, Marcin Kozłowski, José Sena-Cruz, Loucas Papadakis, Mohamed Nasr Saleh, Klara V. Machalicka, Sofia Teixeira de Freitas & Anastasios P. Vassilopoulos. (2022) Testing mechanical performance of adhesively bonded composite joints in engineering applications: an overview. The Journal of Adhesion 98:14, pages 2133-2209.
Read now
Read now
Till Vallée, Holger Fricke, Sebastian Myslicki, Marvin Kaufmann, Morten Voß, Christian Denkert, Ralf Glienke, Maik Dörre, Michael-Knuth Henkel & Thomas Gerke. (2022) Modelling and strength prediction of pre-tensioned hybrid bonded joints for structural steel applications. The Journal of Adhesion 98:11, pages 1573-1613.
Read now
Read now
Marcio Moreira Arouche, Sofia Teixeira de Freitas & Silvio de Barros. (2022) Evaluation of the strain-based partitioning method for mixed-mode I+II fracture of bi-material cracks. The Journal of Adhesion 98:6, pages 577-605.
Read now
Read now
Ioannis Floros & Konstantinos Tserpes. (2021) Numerical simulation of quasi-static and fatigue debonding growth in adhesively bonded composite joints containing bolts as crack stoppers. The Journal of Adhesion 97:7, pages 611-633.
Read now
Read now
M.Z. Sadeghi, J. Zimmermann, A. Gabener & K.U. Schröder. (2021) On the bondline thickness effect in mixed-mode fracture characterisation of an epoxy adhesive. The Journal of Adhesion 97:3, pages 282-304.
Read now
Read now
Wei Huang, Lingyu Sun, Lijun Li, Le Shen, Bincheng Huang & Yiben Zhang. (2020) Investigations on low-energy impact and post-impact fatigue of adhesively bonded single-lap joints using composites substrates. The Journal of Adhesion 96:15, pages 1326-1354.
Read now
Read now
S. Fevery, H. Hallez, D. Vandepitte & S. Debruyne. (2020) Lifetime assessment of structural adhesive joints by combining effects of mechanical load, humidity, moisture and UV: design of a test rig. The Journal of Adhesion 96:1-4, pages 461-473.
Read now
Read now
P. A. Zugliani, M. D. Banea, S. Budhe, R. J. Carbas, L. F. M. da Silva, N. R. F. Rohem & S. de Barros. (2019) Bonded composite repair of metallic pipeline using energy release rate method. Journal of Adhesion Science and Technology 33:19, pages 2141-2156.
Read now
Read now
M. R. Gheibi, M. H. Shojaeefard & H. Saeidi Googarchin. (2019) Direct determination of a new mode-dependent cohesive zone model to simulate metal-to-metal adhesive joints. The Journal of Adhesion 95:10, pages 943-970.
Read now
Read now
A. B. de Morais. (2019) Analysis of the fracture process zone and effective crack length in the adhesively bonded end-notched flexure specimen. The Journal of Adhesion 95:8, pages 770-795.
Read now
Read now
Guofeng Qin, Jingxin Na, Wei Tan, Wenlong Mu & Jundong Ji. (2019) Failure prediction of adhesively bonded CFRP-Aluminum alloy joints using cohesive zone model with consideration of temperature effect. The Journal of Adhesion 95:8, pages 723-746.
Read now
Read now
Marcio Moreira Arouche, Wandong Wang, Sofia Teixeira de Freitas & Silvio de Barros. (2019) Strain-based methodology for mixed-mode I+II fracture: A new partitioning method for bi-material adhesively bonded joints. The Journal of Adhesion 95:5-7, pages 385-404.
Read now
Read now
A. Chiminelli, C. Valero, M. Lizaranzu, C. I. López & M. Canales. (2019) Modelling of bonded joints with flexible adhesives. The Journal of Adhesion 95:5-7, pages 369-384.
Read now
Read now
A. Akhavan-Safar, M. R. Ayatollahi, S. A. Bahreinian & L. F. M. da Silva. (2019) Application of adhesively bonded single lap joints for fracture assessment of adhesive materials. The Journal of Adhesion 95:1, pages 1-22.
Read now
Read now
Nao Terasaki, Yuki Fujio, Yoshitaro Sakata, Shin Horiuchi & Haruhisa Akiyama. (2018) Visualization of crack propagation for assisting double cantilever beam test through mechanoluminescence. The Journal of Adhesion 94:11, pages 867-879.
Read now
Read now
B.M.A. de Oliveira, R.D.S.G. Campilho, F.J.G. Silva & R.J.B. Rocha. (2018) Comparison between the ENF and 4ENF fracture characterization tests to evaluate GIIC of bonded aluminium joints. The Journal of Adhesion 94:11, pages 910-931.
Read now
Read now
Mohamad Ghazi Droubi, Alan Stuart, John Mowat, Craig Noble, Anil Kumar Prathuru & Nadimul Haque Faisal. (2018) Acoustic emission method to study fracture (Mode-I, II) and residual strength characteristics in composite-to-metal and metal-to-metal adhesively bonded joints. The Journal of Adhesion 94:5, pages 347-386.
Read now
Read now
A. B. de Morais. (2017) Analysis of the cohesive zone and crack length correction in the adhesively bonded double cantilever beam specimen. The Journal of Adhesion 93:14, pages 1146-1161.
Read now
Read now
Yu Sekiguchi, Masato Katano & Chiaki Sato. (2017) Experimental study of the Mode I adhesive fracture energy in DCB specimens bonded with a polyurethane adhesive. The Journal of Adhesion 93:3, pages 235-255.
Read now
Read now
Zhen-wen Zhang, Yu-shun Li & Rui Liu. (2016) Failure behavior of adhesive bonded interface between steel and bamboo plywood. Journal of Adhesion Science and Technology 30:19, pages 2081-2099.
Read now
Read now
F. Stuparu, D. M. Constantinescu, D. A. Apostol & M. Sandu. (2016) A Combined Cohesive Elements—XFEM Approach for Analyzing Crack Propagation in Bonded Joints. The Journal of Adhesion 92:7-9, pages 535-552.
Read now
Read now
K. Shimamoto, Y. Sekiguchi & C. Sato. (2016) The Critical Energy Release Rate of Welded Joints Between Fiber-Reinforced Thermoplastics and Metals When Thermal Residual Stress is Considered. The Journal of Adhesion 92:4, pages 306-318.
Read now
Read now
Hamza EL Etri, Mehmet Ziya Polat & Ferhat Kadioglu. Numerical and experimental 3-point bending quasi-static flexural behavior of single-strap joints joined using AF163-2K adhesive films. The Journal of Adhesion 0:0, pages 1-28.
Read now
Read now
Articles from other publishers (135)
Fengzhen Sun, Maria Lißner, Nik Petrinic & Bamber R.K. Blackman. (2024) Universal slope-based J-integral methods for characterization of the mode I, mode II and mixed mode I/II fracture behaviour of adhesively bonded interfaces. Composites Science and Technology 252, pages 110611.
Crossref
Crossref
Ihssane Kididane, Niklas Ladwig & Stephan Marzi. (2024) Dual-actuator mixed-mode bending tests on structural adhesive joints. Engineering Fracture Mechanics 301, pages 110017.
Crossref
Crossref
Mahfoudh Taleb Ali, Zaineb Jebri & Julien Jumel. (2024) Evaluation of the critical SERR in the presence of heterogeneous interfaces in bonded joints: application to parallel defects in DCB titanium alloy laser-treated specimens. Journal of the Brazilian Society of Mechanical Sciences and Engineering 46:4.
Crossref
Crossref
Shan Li, Defeng Chen, Yiyan Lu & Zhenzhen Liu. (2024) Fatigue fracture characteristics of normal concrete and high ductility geopolymer bonding based on DIC technique. Thin-Walled Structures 196, pages 111469.
Crossref
Crossref
G.H.M. Oliveira, S.T. Amancio-Filho & L.B. Canto. (2024) Processing understanding, mechanical durability and hygrothermal stability of PC/AA6061 hybrid joints produced via injection overmolding. International Journal of Adhesion and Adhesives 130, pages 103617.
Crossref
Crossref
A. Akhavan-Safar, A. Ajdani, L.F.M. da Silva & M.R. Ayatollahi. (2024) Direct cohesive law measurement under mixed-mode loading using semi-circular bend (SCB) specimens. International Journal of Adhesion and Adhesives 130, pages 103603.
Crossref
Crossref
Sebastian Myslicki, Till Vallée, Marvin Kaufmann, Thomas Ummenhofer, Jakob Boretzki & Matthias Albiez. (2024) Harnessing the synergy of grout and adhesive: Numerical prediction of load capacity in hybrid composite joints. International Journal of Adhesion and Adhesives 130, pages 103602.
Crossref
Crossref
Daniel S. Correia, Inês D. Costa, Eduardo A. S. Marques, Ricardo J. C. Carbas & Lucas F. M. da Silva. (2024) Development of a Unified Specimen for Adhesive Characterization—Part 2: Experimental Study on the Mode I (mDCB) and II (ELS) Fracture Components. Materials 17:5, pages 1049.
Crossref
Crossref
Shengjun Zhao, Tong An, Qi Wang & Fei Qin. (2024) Using Machine Learning and Finite Element Analysis to Extract Traction-Separation Relations at Bonding Wire Interfaces of Insulated Gate Bipolar Transistor Modules. Materials 17:5, pages 1002.
Crossref
Crossref
Rafael Beck, Jailto Antonio Prado da Silva, Lucas FM da Silva, Volnei Tita & Ricardo de Medeiros. (2024) Assessing critical fracture energy in mode I for bonded composite joints: A numerical–experimental approach with uncertainty analysis. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications.
Crossref
Crossref
Gang Li, Guillaume Renaud & Chun Li. (2024) Analytical evaluation of laminated composite DCB test data for achieving validated modelling analysis. Journal of Mechanics of Materials and Structures 19:1, pages 19-36.
Crossref
Crossref
Nao Terasaki. 2024. Interfacial Phenomena in Adhesion and Adhesive Bonding. Interfacial Phenomena in Adhesion and Adhesive Bonding
209
290
.
João P. J. R. Santos, Daniel S. Correia, Eduardo A. S. Marques, Ricardo J. C. Carbas, Frida Gilbert & Lucas F. M. da Silva. (2023) Extended Finite Element Method (XFEM) Model for the Damage Mechanisms Present in Joints Bonded Using Adhesives Doped with Inorganic Fillers. Materials 16:23, pages 7499.
Crossref
Crossref
C.S.P. Borges, E.A.S. Marques, R.J.C. Carbas, A. Akhavan-Safar, C. Ueffing, P. Weißgraeber & L.F.M. da Silva. (2023) Testing method to determine the strength and fracture toughness of adhesives in a single continuous test. Theoretical and Applied Fracture Mechanics 128, pages 104119.
Crossref
Crossref
Frédéric Lebon, Maria Letizia Raffa & Raffaella Rizzoni. (2023) A family of models of hard and soft interfaces with damage. Theoretical and Applied Fracture Mechanics 127, pages 104008.
Crossref
Crossref
Celalettin Baykara. (2023) Effects of single-lap joint at different adhesive thicknesses on fatigue strength of metals with different surface coatings. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 237:17, pages 3987-4004.
Crossref
Crossref
Kaan Nuhoğlu, Engin Aktaş, Metin Tanoğlu, Seçkin Martin, Hande İplikçi, Murat Barisik, Melisa Yeke, Ceren Türkdoğan, Gözde Esenoğlu, Serkan Dehneliler & Mehmet Erdem İriş. (2023) Analysis of adhesively bonded joints of laser surface treated composite primary components of aircraft structures. International Journal of Adhesion and Adhesives 126, pages 103456.
Crossref
Crossref
Daniel S. Correia, Inês D. Costa, Beatriz D. Simões, Eduardo A. S. Marques, Ricardo J. C. Carbas & Lucas F. M. da Silva. (2023) Development of a Unified Specimen for Adhesive Characterisation—Part 1: Numerical Study on the Mode I (mDCB) and II (ELS) Fracture Components. Materials 16:8, pages 2951.
Crossref
Crossref
Anis Mohabeddine, Ghassan Malik, José Correia, Filipe Silva, Abílio De Jesus, Nicholas Fantuzzi & José Miguel Castro. (2023) Experimental parametric investigation on the behavior of adhesively bonded CFRP/steel joints. Composite Structures 307, pages 116598.
Crossref
Crossref
Sarah Glaser, Omid Zarmandili, Elisabeth Stammen & Klaus Dilger. (2022) Characterization of adhesive curing reactions using rapid heat rheology. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering 237:1, pages 4-13.
Crossref
Crossref
A.F.L. Macedo, R.D.S.G. Campilho, F.J.G. Silva & MA Bellali. (2022) Numerical analysis of the mixed-mode fracture of bonded joints depending on the adhesive thickness. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering 237:1, pages 14-25.
Crossref
Crossref
Olli Orell, Jarno Jokinen & Mikko Kanerva. (2023) Use of DIC in the characterisation of mode II crack propagation in adhesive fatigue testing. International Journal of Adhesion and Adhesives 122, pages 103332.
Crossref
Crossref
Frédéric Lebon, Maria Letizia Raffa & Raffaella Rizzoni. A general model of hard and soft interfaces with damage. A general model of hard and soft interfaces with damage.
Bamber Blackman, Fengzhen Sun, Sofia Teixeira de Freitas, Silvio de Barros, Marcio Moreira Arouche & Alojz Ivankovic. 2023. Advances in Structural Adhesive Bonding. Advances in Structural Adhesive Bonding
579
613
.
David Lindeman, Aaron Hedegaard, Chaodi Li & Samuel Carpenter. 2023. Advances in Structural Adhesive Bonding. Advances in Structural Adhesive Bonding
1011
1033
.
Stephan Marzi. 2023. Advances in Structural Adhesive Bonding. Advances in Structural Adhesive Bonding
525
578
.
Luís F. R. Neves, Raul D. S. G. Campilho, Isidro J. Sánchez-Arce, Kouder Madani & Chander Prakash. (2022) Numerical Modelling and Validation of Mixed-Mode Fracture Tests to Adhesive Joints Using J-Integral Concepts. Processes 10:12, pages 2730.
Crossref
Crossref
Natalia M. André, Renan Pereira Alessio, Jorge F. dos Santos & Sergio T. Amancio-Filho. (2022) Microscale Damage Evolution and Failure Behavior of Metal–Composite Friction Spot Joints: Modelling and Experimental Analyses. Metals 12:12, pages 2080.
Crossref
Crossref
Till Vallée, Marvin Kaufmann, Robert D. Adams, Matthias Albiez, João R. Correia & Thomas Tannert. (2022) Are probabilistic methods a way to get rid of fudge factors? Part I: Background and theory. International Journal of Adhesion and Adhesives 119, pages 103255.
Crossref
Crossref
R.A.A. Lima, F. Migliavacca, L.M. Martulli, M. Carboni & A. Bernasconi. (2022) Distributed fibre optic monitoring of mode I fatigue crack propagation in adhesive bonded joints and comparison with digital image correlation. Theoretical and Applied Fracture Mechanics 121, pages 103501.
Crossref
Crossref
Till Vallée, Hossahalli Ramesh Rakesh & Thomas Tannert. (2022) Load-carrying capacity prediction of single rods glued into cross-laminated timber. European Journal of Wood and Wood Products 80:5, pages 1041-1055.
Crossref
Crossref
M. Moazzami, M.R. Ayatollahi, A. Akhavan-Safar, S. Teixeira De Freitas, J.A. Poulis & L.F.M. da Silva. (2022) Effect of cyclic aging on mode I fracture energy of dissimilar metal/composite DCB adhesive joints. Engineering Fracture Mechanics 271, pages 108675.
Crossref
Crossref
J. P. Márquez Costa, J. Jumel, C. Badulescu & G. Stamoulis. (2022) Self-similar crack propagation along a viscoelastic interface in a double-cantilever beam test. Mechanics of Time-Dependent Materials.
Crossref
Crossref
A.C. Lopes, E.C. Silva, N. Dourado, M.F.S.F. de Moura, A.M. Sampaio & A.J. Pontes. (2022) The double cantilever beam test applied to mode I fracture characterization of polyamide 12 processed by selective laser sintering technology. Engineering Fracture Mechanics 269, pages 108555.
Crossref
Crossref
Matthias Albiez, Jannis Damm, Thomas Ummenhofer, Marvin Kaufmann, Till Vallée & Sebastian Myslicki. (2022) Hybrid joining of jacket structures for offshore wind turbines – Determination of requirements and adhesive characterisation. Engineering Structures 259, pages 114186.
Crossref
Crossref
A.B. de Morais. (2022) A beam model for the fracture of adhesive joints with dissimilar metal adherends. International Journal of Adhesion and Adhesives 114, pages 103112.
Crossref
Crossref
D.S. Correia, E.A.S. Marques, R.J.C. Carbas, P.J.C. das Neves & L.F.M. da Silva. (2022) Numerical optimisation of bonded joints for the manufacture of edge milling tools. Engineering Failure Analysis 134, pages 106012.
Crossref
Crossref
Jin-Jian Xu, Chao-Sheng Tang, Qing Cheng, Qi-liang Xu, Hilary I. Inyang, Zhu-Yuan Lin & Bin Shi. (2021) Investigation on desiccation cracking behavior of clayey soils with a perspective of fracture mechanics: a review. Journal of Soils and Sediments 22:3, pages 859-888.
Crossref
Crossref
Evanthia J. Pappa, James A. Quinn, James J. Murray, James R. Davidson, Conchúr M. Ó Brádaigh & Edward D. McCarthy. (2021) Experimental Study on the Interlaminar Fracture Properties of Carbon Fibre Reinforced Polymer Composites with a Single Embedded Toughened Film. Polymers 13:23, pages 4103.
Crossref
Crossref
A. Ammar, W. Leclerc, M. Guessasma & N. Haddar. (2021) Discrete element approach to simulate debonding process in 3D short glass fibre composite materials: Application to PA6/GF30. Composite Structures 270, pages 114035.
Crossref
Crossref
Xiang-Fa Wu, Youhao Zhao & Oksana Zholobko. (2021) Stress-Function Variational Method for Accurate Free-Edge Interfacial Stress Analysis of Adhesively Bonded Single-Lap Joints and Single-Sided Joints. Journal of Composites Science 5:8, pages 197.
Crossref
Crossref
Morten Voß, Till Vallée & Marvin Kaufmann. (2021) Accelerated curing of adhesively bonded G-FRP tube connections—Part III: Modelling of strength. Composite Structures 268, pages 113900.
Crossref
Crossref
Martin Brandtner-Hafner. (2021) Structural safety evaluation of adhesive bonds: A fracture analytical approach. Engineering Failure Analysis 123, pages 105289.
Crossref
Crossref
Francis M.G. Ramírez, Marcelo F.S.F. de Moura, Raul D.F. Moreira & Filipe G.A. Silva. (2021) Experimental and numerical mixed-mode I + II fracture characterization of carbon fibre reinforced polymer laminates using a novel strategy. Composite Structures 263, pages 113683.
Crossref
Crossref
Josef Weiland, Alexander Schiebahn, Uwe Reisgen, Mohammad Zamaan Sadeghi, Markus Gastens, Andreas Janetzko-Preisler & Kai-Uwe Schröder. (2021) Effiziente Zustandsüberwachung struktureller Klebungen. adhäsion KLEBEN & DICHTEN 65:5, pages 40-45.
Crossref
Crossref
Royson Dsouza, Paulo Antunes, Markus Kakkonen, Olli Tanhuanpää, Pekka Laurikainen, Farzin Javanshour, Pasi Kallio & Mikko Kanerva. (2021) Microscale sensor solution for data collection from fibre-matrix interfaces. Scientific Reports 11:1.
Crossref
Crossref
Arsalan Ajdani, Majid R. Ayatollahi & Lucas F.M. da Silva. (2021) Mixed mode fracture analysis in a ductile adhesive using semi-circular bend (SCB) specimen. Theoretical and Applied Fracture Mechanics 112, pages 102927.
Crossref
Crossref
Marek Rośkowicz, Jan Godzimirski, Michał Jasztal & Jarosław Gąsior. (2021) Improvement of fatigue life of riveted joints in helicopter airframes. Eksploatacja i Niezawodność – Maintenance and Reliability 23:1, pages 165-175.
Crossref
Crossref
Omid Sam-Daliri, Lisa-Marie Faller, Mohammadreza Farahani & Hubert Zangl. (2021) Structural health monitoring of adhesive joints under pure mode I loading using the electrical impedance measurement. Engineering Fracture Mechanics 245, pages 107585.
Crossref
Crossref
Jonnas Santos Alves, Paulo Pedro Kenedi & Silvio de Barros. (2021) Evaluation of structural adhesive joints fracture toughness without crack measurement. Matéria (Rio de Janeiro) 26:1.
Crossref
Crossref
Marcio Moreira Arouche, Sofia Teixeira de Freitas & Silvio de Barros. (2021) On the influence of glass fiber mat on the mixed-mode fracture of composite-to-metal bonded joints. Composite Structures 256, pages 113109.
Crossref
Crossref
Zhengwen Jiang, Zhi Fang, Libo Yan, Shui Wan & Yawei Fang. (2021) Mixed-mode I/II fracture criteria for adhesively-bonded pultruded GFRP/steel joint. Composite Structures 255, pages 113012.
Crossref
Crossref
Till Vallée & Matthias Albiez. 2021. Adhesive Bonding. Adhesive Bonding
525
569
.
David A. Dillard. 2021. Adhesive Bonding. Adhesive Bonding
295
316
.
Sarah Glaser, Elisabeth Stammen & Klaus Dilger. 2021. 6th International Conference on Adhesive Bonding 2021. 6th International Conference on Adhesive Bonding 2021
53
68
.
João Pedro Reis, Marcelo de Moura & Sylwester Samborski. (2020) Thermoplastic Composites and Their Promising Applications in Joining and Repair Composites Structures: A Review. Materials 13:24, pages 5832.
Crossref
Crossref
Mohammadhossein Shahriari & Hamed Saeidi Googarchin. (2020) Numerical investigation of the impact fracture performance of a composite laminated windshield considering the Park-Paulinho-Roesler cohesive zone model. Composite Structures 249, pages 112568.
Crossref
Crossref
Hang Xu, Xiaorui Zhang, Guangkai Hu, Ling Weng & Lizhu Liu. (2020) A special filler for epoxy resin to enhance the T peel strength of adhesive. Polymer Composites 41:10, pages 4372-4378.
Crossref
Crossref
Alireza Akhavan‐Safar, Mazaher Salamat‐talab, Arsalan Ajdani, Majid R. Ayatollahi & Lucas F.M. da Silva. (2020) Mode II fracture energy characterization of brittle adhesives using compliance calibration method. Fatigue & Fracture of Engineering Materials & Structures 43:9, pages 1928-1937.
Crossref
Crossref
Arsalan Ajdani, Majid R. Ayatollahi, Alireza Akhavan-Safar & Lucas Filipe Martins da Silva. (2020) Mixed mode fracture characterization of brittle and semi-brittle adhesives using the SCB specimen. International Journal of Adhesion and Adhesives 101, pages 102629.
Crossref
Crossref
Jalal Nasser, Lisha Zhang & Henry Sodano. (2020) Aramid nanofiber interlayer for improved interlaminar properties of carbon fiber/epoxy composites. Composites Part B: Engineering 197, pages 108130.
Crossref
Crossref
Jinchen Ji & Quantian Luo. 2020. Structural Adhesive Joints. Structural Adhesive Joints
159
204
.
A.B. de Morais. (2020) Determination of the shear traction-separation law of adhesive layers using the end-notched flexure specimen. Engineering Fracture Mechanics 235, pages 107199.
Crossref
Crossref
R. Dsouza, P. Antunes, M. Kakkonen, J. Jokinen, E. Sarlin, P. Kallio & M. Kanerva. (2020) 3D interfacial debonding during microbond testing: Advantages of local strain recording. Composites Science and Technology 195, pages 108163.
Crossref
Crossref
Bach Do & Akhrawat Lenwari. (2020) Optimization of Fiber-Reinforced Polymer Patches for Repairing Fatigue Cracks in Steel Plates Using a Genetic Algorithm. Journal of Composites for Construction 24:2.
Crossref
Crossref
M.Z. Sadeghi, J. Weiland, A. Preisler, J. Zimmermann, A. Schiebahn, U. Reisgen & K.U. Schroeder. (2020) Damage detection in adhesively bonded single lap joints by using backface strain: Proposing a new position for backface strain gauges. International Journal of Adhesion and Adhesives 97, pages 102494.
Crossref
Crossref
M.Z. Sadeghi, A. Gabener, J. Zimmermann, K. Saravana, J. Weiland, U. Reisgen & K.U. Schroeder. (2020) Failure load prediction of adhesively bonded single lap joints by using various FEM techniques. International Journal of Adhesion and Adhesives 97, pages 102493.
Crossref
Crossref
Ioannis Katsivalis, Ole Thybo Thomsen, Stefanie Feih & Mithila Achintha. (2020) Development of cohesive zone models for the prediction of damage and failure of glass/steel adhesive joints. International Journal of Adhesion and Adhesives 97, pages 102479.
Crossref
Crossref
M.A. Morgado, R.J.C. Carbas, D.G. dos Santos & L.F.M. da Silva. (2020) Strength of CFRP joints reinforced with adhesive layers. International Journal of Adhesion and Adhesives 97, pages 102475.
Crossref
Crossref
Joao Monteiro, Alireza Akhavan‐Safar, Ricardo Carbas, Eduardo Marques, Rakesh Goyal, Mohamad El‐zein & Lucas F.M. da Silva. (2019) Influence of mode mixity and loading conditions on the fatigue crack growth behaviour of an epoxy adhesive. Fatigue & Fracture of Engineering Materials & Structures 43:2, pages 308-316.
Crossref
Crossref
Jose Menjivar & Kedar Kirane. (2020) Surfactant assisted dispersion of MWCNT's in epoxy nanocomposites and adhesion with aluminum. Polymer Testing 82, pages 106308.
Crossref
Crossref
Luca Sorrentino, Sonia Marfia, Gianluca Parodo & Elio Sacco. (2020) Laser treatment surface: An innovative method to increase the adhesive bonding of ENF joints in CFRP. Composite Structures 233, pages 111638.
Crossref
Crossref
L.D.C. Ramalho, R.D.S.G. Campilho, J. Belinha & L.F.M. da Silva. (2020) Static strength prediction of adhesive joints: A review. International Journal of Adhesion and Adhesives 96, pages 102451.
Crossref
Crossref
Manuel A.G. Silva, Hugo Biscaia & Pedro Ribeiro. (2019) On factors affecting CFRP-steel bonded joints. Construction and Building Materials 226, pages 360-375.
Crossref
Crossref
J.J.M. Machado, A. Hayashi, Y. Sekigushi, R.D.S.G. Campilho, E.A.S. Marques, C. Sato & Lucas F.M. da Silva. (2019) Dynamic behaviour in mode I fracture toughness of CFRP as a function of temperature. Theoretical and Applied Fracture Mechanics 103, pages 102257.
Crossref
Crossref
Nao Terasaki, Yuki Fujio, Shin Horiuchi & Haruhisa Akiyama. (2019) Mechanoluminescent studies of failure line on double cantilever beam (DCB) and tapered-DCB (TDCB) test with similar and dissimilar material joints. International Journal of Adhesion and Adhesives 93, pages 102328.
Crossref
Crossref
Luca Sorrentino, Costanzo Bellini, Gianluca Parodo & Sandro Turchetta. (2019) Increasing of ENF Bonded Joints Performance by Design of Laser Surface Texturing. Key Engineering Materials 813, pages 346-351.
Crossref
Crossref
Majid R. Ayatollahi, Arsalan Ajdani, Alireza Akhavan-Safar & L.F.M. da Silva. (2019) Effect of notch length and pre-crack size on mode II fracture energy of brittle adhesives. Engineering Fracture Mechanics 212, pages 123-135.
Crossref
Crossref
M.R. Gheibi, M.H. Shojaeefard & H. Saeidi Googarchin. (2019) Experimental and numerical analysis on the cohesive behavior of an automotive adhesive improved by MWCNT subjected to mode I and II loadings. International Journal of Mechanical Sciences 153-154, pages 271-286.
Crossref
Crossref
Natalia Manente André, Jorge F. dos Santos & Sergio T. Amancio-Filho. (2019) Evaluation of Joint Formation and Mechanical Performance of the AA7075-T6/CFRP Spot Joints Produced by Frictional Heat. Materials 12:6, pages 891.
Crossref
Crossref
Pengfei Zhang, Ziyao Gao, Qian Zhang, Ahmed Khattab & Guoqiang Li. (2018) Fracture behavior characterization of arcan polycaprolactone based polymer composites prepared by polymerization induced phases separation. Polymer Composites 40:3, pages 1198-1208.
Crossref
Crossref
G. Zambelis, T. Da Silva Botelho, O. Klinkova, I. Tawfiq & C. Lanouette. (2019) A new approach in testing fatigue fracture mechanics properties in asymmetrical bonded composite/metal assemblies. Composites Part B: Engineering 158, pages 390-399.
Crossref
Crossref
G. A. Pappas & J. Botsis. (2019) Design optimization of a CFRP–aluminum joint for a bioengineering application. Design Science 5.
Crossref
Crossref
A.J.S. Leal, R.D.S.G. Campilho, F.J.G. Silva, D.F.O. Silva & F.J.P. Moreira. (2019) Comparison of different test configurations for the shear fracture toughness evaluation of a ductile adhesive. Procedia Manufacturing 38, pages 940-947.
Crossref
Crossref
Filipe A. A. Nunes & Raul D. S. G. Campilho. 2019. Innovation, Engineering and Entrepreneurship. Innovation, Engineering and Entrepreneurship
450
455
.
Olaf Hesebeck, Udo Meyer, Andrea Sondag & Markus Brede. 2018. Adhesive Joints. Adhesive Joints
229
264
.
S. Budhe, M. D. Banea & S. de Barros. (2018) Bonded repair of composite structures in aerospace application: a review on environmental issues. Applied Adhesion Science 6:1.
Crossref
Crossref
Michal K. Budzik & Simon Heide-Jørgensen. (2018) Branching and softening of loading path during onset of crack at elastic-brittle interface. Mechanics of Materials 127, pages 1-13.
Crossref
Crossref
F.A.A. Nunes & R.D.S.G. Campilho. (2018) Mixed-mode fracture analysis of adhesively-bonded joints using the ATDCB test specimen. International Journal of Adhesion and Adhesives 85, pages 58-68.
Crossref
Crossref
A.J.S. Leal & R.D.S.G. Campilho. (2018) Numerical evaluation of the ENF and 4ENF tests for the shear toughness estimation of adhesive joints. Composite Structures 202, pages 333-343.
Crossref
Crossref
M Costa, G Viana, LFM da Silva & RDSG Campilho. (2016) Effect of humidity on the mechanical properties of adhesively bonded aluminium joints. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 232:9, pages 733-742.
Crossref
Crossref
Agostina Orefice, Geminiano Mancusi, Valentino Paolo Berardi, Luciano Feo & Giulio Zuccaro. (2018) Residual stiffness of bonded joints for fibre-reinforced polymer profiles. Composites Part B: Engineering 144, pages 237-253.
Crossref
Crossref
C.F.C. Bandeira, P.P. Kenedi, L.F.G. Souza & S. de Barros. (2018) On the use of thermographic technique to assess the fatigue performance of bonded joints. International Journal of Adhesion and Adhesives 83, pages 137-142.
Crossref
Crossref
Alex Møberg, Michal K. Budzik & Henrik M. Jensen. (2018) Growth from initial to self-similar shape of an interface crack front. International Journal of Adhesion and Adhesives 83, pages 59-68.
Crossref
Crossref
Ala Tabiei & Wenlong Zhang. (2018) Composite Laminate Delamination Simulation and Experiment: A Review of Recent Development. Applied Mechanics Reviews 70:3.
Crossref
Crossref
Mürsel Ekrem & Ahmet Avcı. (2018) Effects of polyvinyl alcohol nanofiber mats on the adhesion strength and fracture toughness of epoxy adhesive joints. Composites Part B: Engineering 138, pages 256-264.
Crossref
Crossref
G. Zambelis, T. Da Silva Botelho, O. Klinkova, I. Tawfiq & C. Lanouette. (2018) Evaluation of the energy release rate in mode I of asymmetrical bonded composite/metal assembly. Engineering Fracture Mechanics 190, pages 175-185.
Crossref
Crossref
A.B. de Morais. (2018) Elastic-plastic analysis of the adhesively bonded end-notched flexure specimen. Engineering Fracture Mechanics 188, pages 80-92.
Crossref
Crossref
Taolue Wu, Qingxin Zhang, Chaoqun Zhang, YongBing Li & Blair E. Carlson. (2018) Process variables influencing solder reinforced adhesive (SRA) performance. Journal of Manufacturing Processes 31, pages 440-452.
Crossref
Crossref
Yasmina Boutar, Sami Naïmi, Taieb Daami, Salah Mezlini, Lucas F. M. da Silva & Moez Ben Sik Ali. 2018. Design and Modeling of Mechanical Systems—III. Design and Modeling of Mechanical Systems—III
393
403
.
António A.M.A. Campos, Abílio M.P. de Jesus, José A.F.O. Correia & José J.L. Morais. (2017) Fatigue of adhesively bonded epoxy-AA6061T651 joints. International Journal of Structural Integrity 8:6, pages 707-724.
Crossref
Crossref
H.‐B. Kim, K. Naito & H. Oguma. (2017) Mode II fracture toughness of two‐part acrylic‐based adhesive in an adhesively bonded joint: end‐notched flexure tests under static loading. Fatigue & Fracture of Engineering Materials & Structures 40:11, pages 1795-1808.
Crossref
Crossref
Yu SEKIGUCHI, Yuki YAMAGATA & Chiaki SATO. (2017) Mode I Fracture Energy of Adhesive Joints Bonded with Adhesiveswith Different Characteristics Under Quasi-static and Impact Loading特性の異なる接着剤を用いた接着接合部の準静的および動的負荷下における破壊エネルギー. Journal of The Adhesion Society of Japan 53:10, pages 330-337.
Crossref
Crossref
V Pavelko, K Lapsa & P Pavlovskis. (2017) The effect of plasticity to interlaminar fracture toughness of adhesive bond of composite. IOP Conference Series: Materials Science and Engineering 251, pages 012081.
Crossref
Crossref
Florin Adrian Stuparu, Dragos Alexandru Apostol, Dan Mihai Constantinescu, Catalin R. Picu, Marin Sandu & Stefan Sorohan. (2017) Local evaluation of adhesive failure in similar and dissimilar single-lap joints. Engineering Fracture Mechanics 183, pages 39-52.
Crossref
Crossref
JJM Machado, EAS Marques, RDSG Campilho & Lucas FM da Silva. (2016) Mode I fracture toughness of CFRP as a function of temperature and strain rate. Journal of Composite Materials 51:23, pages 3315-3326.
Crossref
Crossref
M. Costa, R. Carbas, M. Benedita, E. Marques, G. Viana, L.F.M. da Silva, E. Yokoi, S. Nakada & T. Furusawa. (2017) Static assessment of the mixed-mode behaviour of three epoxy adhesives. Engineering Fracture Mechanics 182, pages 552-565.
Crossref
Crossref
M. A. S. Santos & R. D. S. G. Campilho. (2017) Mixed-mode fracture analysis of composite bonded joints considering adhesives of different ductility. International Journal of Fracture 207:1, pages 55-71.
Crossref
Crossref
H.A.M. Araújo, J.J.M. Machado, E.A.S. Marques & L.F.M. da Silva. (2017) Dynamic behaviour of composite adhesive joints for the automotive industry. Composite Structures 171, pages 549-561.
Crossref
Crossref
P. Fernandes, G. Viana, R.J.C. Carbas, M. Costa, L.F.M. da Silva & M.D. Banea. (2017) The influence of water on the fracture envelope of an adhesive joint. Theoretical and Applied Fracture Mechanics 89, pages 1-15.
Crossref
Crossref
G. Stamoulis & N. Carrere. (2017) Investigating the influence of material non-linearity in the fracture properties of ductile adhesives submitted to mixed-mode loading. Engineering Fracture Mechanics 179, pages 260-271.
Crossref
Crossref
Yasmina Boutar, Sami Naïmi, Salah Mezlini, Lucas F.M. da Silva & Moez Ben Sik Ali. (2017) Characterization of aluminium one-component polyurethane adhesive joints as a function of bond thickness for the automotive industry: Fracture analysis and behavior. Engineering Fracture Mechanics 177, pages 45-60.
Crossref
Crossref
Henrique N. P. Oliva & Antonio F. Avila. (2017) Bonded Joints with “Nano-Stitches”: Effect of Carbon Nanotubes on Load Capacity and Failure Modes. Latin American Journal of Solids and Structures 14:4, pages 674-684.
Crossref
Crossref
Johannes Reiner, Juan Pablo Torres & Martin Veidt. (2017) A novel Top Surface Analysis method for Mode I interface characterisation using Digital Image Correlation. Engineering Fracture Mechanics 173, pages 107-117.
Crossref
Crossref
A. Boyano, J. De Gracia, A. Arrese & F. Mujika. (2017) Equivalent energy release rate and crack stability in the End Notched Flexure with inserted roller mixed mode I/II test. Theoretical and Applied Fracture Mechanics 87, pages 99-109.
Crossref
Crossref
Ahmad R. Mojdehi, Douglas P. Holmes & David A. Dillard. (2017) Revisiting the generalized scaling law for adhesion: role of compliance and extension to progressive failure. Soft Matter 13:41, pages 7529-7536.
Crossref
Crossref
S. Budhe, M.D. Banea, S. de Barros & L.F.M. da Silva. (2017) An updated review of adhesively bonded joints in composite materials. International Journal of Adhesion and Adhesives 72, pages 30-42.
Crossref
Crossref
Kazumasa Shimamoto, Yu Sekiguchi & Chiaki Sato. (2016) Mixed mode fracture toughness of adhesively bonded joints with residual stress. International Journal of Solids and Structures 102-103, pages 120-126.
Crossref
Crossref
E MarquesRaul CampilhoM Flaviani & Lucas da Silva. 2016. Strength Prediction of Adhesively-Bonded Joints. Strength Prediction of Adhesively-Bonded Joints
382
410
.
A. Boyano, J. De Gracia, A. Arrese & F. Mujika. (2016) Experimental assessment of an End Notched Flexure test configuration with an inserted roller for analyzing mixed-mode I/II fracture toughness. Engineering Fracture Mechanics 163, pages 462-475.
Crossref
Crossref
R. Avendaño, R.J.C. Carbas, E.A.S. Marques, L.F.M. da Silva & A.A. Fernandes. (2016) Effect of temperature and strain rate on single lap joints with dissimilar lightweight adherends bonded with an acrylic adhesive. Composite Structures 152, pages 34-44.
Crossref
Crossref
Agostina Orefice, Geminiano Mancusi, Serge Dumont & Frédéric Lebon. (2016) An Experimental/Numerical Study on the Interfacial Damage of Bonded Joints for Fibre-Reinforced Polymer Profiles at Service Conditions. Technologies 4:3, pages 20.
Crossref
Crossref
XiaoBo Zhu, Xin Yang, YongBing Li & Blair E. Carlson. (2016) Reinforcing cross-tension strength of adhesively bonded joints using metallic solder balls. International Journal of Adhesion and Adhesives 68, pages 263-272.
Crossref
Crossref
M. Schiel, J. Kahrs, E. Stammen & K. Dilger. (2016) Determination of cure-dependent properties of adhesives by thermal analysis using reaction kinetics and a novel experimental apparatus. International Journal of Adhesion and Adhesives 68, pages 411-417.
Crossref
Crossref
R.M. Lopes, R.D.S.G. Campilho, F.J.G. da Silva & T.M.S. Faneco. (2016) Comparative evaluation of the Double-Cantilever Beam and Tapered Double-Cantilever Beam tests for estimation of the tensile fracture toughness of adhesive joints. International Journal of Adhesion and Adhesives 67, pages 103-111.
Crossref
Crossref
K. Shimamoto, Y. Sekiguchi & C. Sato. (2016) Effects of surface treatment on the critical energy release rates of welded joints between glass fiber reinforced polypropylene and a metal. International Journal of Adhesion and Adhesives 67, pages 31-37.
Crossref
Crossref
Yishou WangXinlin QingLiang DongSourav Banerjee. Multi-field coupled sensing network for health monitoring of composite bolted joint. Multi-field coupled sensing network for health monitoring of composite bolted joint.
A. Q. Barbosa, L. F. M. da Silva, M. D. Banea & A. Öchsner. (2016) Methods to increase the toughness of structural adhesives with micro particles: an overview with focus on cork particles. Materialwissenschaft und Werkstofftechnik 47:4, pages 307-325.
Crossref
Crossref
K. Senthil, A. Arockiarajan & R. Palaninathan. (2016) Experimental determination of fracture toughness for adhesively bonded composite joints. Engineering Fracture Mechanics 154, pages 24-42.
Crossref
Crossref
Florin Adrian Stuparu, Dragos Alexandru Apostol, Dan Mihai Constantinescu, Catalin Radu Picu, Marin Sandu & Stefan Sorohan. (2016) Cohesive and XFEM evaluation of adhesive failure for dissimilar single-lap joints. Procedia Structural Integrity 2, pages 316-325.
Crossref
Crossref
K. Hasegawa, A.D. Crocombe, F. Coppuck, D. Jewel & S. Maher. (2015) Characterising bonded joints with a thick and flexible adhesive layer–Part 1: Fracture testing and behaviour. International Journal of Adhesion and Adhesives 63, pages 124-131.
Crossref
Crossref
A.B. de Morais. (2015) Analysis of the metal adhesively bonded double cantilever beam specimen. International Journal of Adhesion and Adhesives 61, pages 8-14.
Crossref
Crossref
Kazumasa SHIMAMOTO, Yu SEKIGUCHI & Chiaki SATO. (2015) Thermal Stress Reduction and Strength Evaluation ofWelded Joints for Dissimilar Materials. Journal of The Adhesion Society of Japan 51:9, pages 409-415.
Crossref
Crossref
Zhen-wen Zhang, Yu-shun Li & Rui Liu. (2015) An analytical model of stresses in adhesive bonded interface between steel and bamboo plywood. International Journal of Solids and Structures 52, pages 103-113.
Crossref
Crossref
Julien Jumel, Naoufel Ben Salem, Michal K. Budzik & Martin E.R. Shanahan. (2015) Measurement of interface cohesive stresses and strains evolutions with combined mixed mode crack propagation test and Backface Strain Monitoring measurements. International Journal of Solids and Structures 52, pages 33-44.
Crossref
Crossref