Citations (518)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (199)
Sanku Dey, Mahendra Saha & Chanseok Park. (2023) Applications of a new loss and cost-based process capability index to electronic industries. Communications in Statistics: Case Studies, Data Analysis and Applications 9:4, pages 351-377.
Read now
Read now
Aradhana Srivastava, Anoop Chaturvedi & Nirpeksh Kumar. (2023) Finite sample performance of an estimator of process capability index C for the autocorrelated data. Communications in Statistics - Simulation and Computation 52:9, pages 4348-4360.
Read now
Read now
Mahendra Saha, Anju Devi & Pratibha Pareek. (2023) Applications of process capability indices for suppliers selection problems using generalized confidence interval. Communications in Statistics: Case Studies, Data Analysis and Applications 9:3, pages 270-286.
Read now
Read now
Zih-Huei Wang, Chien-Wei Wu & Jhen-Jia Jhu. (2023) Design and construction of a quick-switching sampling system with a third-generation capability index. Communications in Statistics - Theory and Methods 52:11, pages 3633-3651.
Read now
Read now
Mahendra Saha & Sanku Dey. (2023) Uses of a new asymmetric loss-based process capability index in the electronic industries. Communications in Statistics: Case Studies, Data Analysis and Applications 9:2, pages 135-151.
Read now
Read now
Aylin Pakzad & Elham Basiri. (2023) A new incapability index for simple linear profile with asymmetric tolerances. Quality Engineering 35:2, pages 324-340.
Read now
Read now
Shih-Wen Liu, Zih-Huei Wang & To-Cheng Wang. (2023) Developing a cost-efficient dual sampling system for lot disposition by considering process yield and quality loss. Quality Engineering 35:2, pages 267-278.
Read now
Read now
Mahendra Saha & Sanku Dey. (2023) Confidence Intervals of a Loss Based PCI Using Exponentiated-Exponential Distributed Quality Characteristics. American Journal of Mathematical and Management Sciences 42:2, pages 163-181.
Read now
Read now
Mahendra Saha. (2022) Applications of a new process capability index to electronic industries. Communications in Statistics: Case Studies, Data Analysis and Applications 8:4, pages 574-587.
Read now
Read now
Xinjia Xiong & Yongchang Feng. (2022) Process quality indices: new metrics for process quality capability with zero-loss baseline. Total Quality Management & Business Excellence 33:9-10, pages 975-993.
Read now
Read now
Sanku Dey, Mahendra Saha & Sumit Kumar. (2022) Parametric Confidence Intervals of S for Generalized Exponential Distribution. American Journal of Mathematical and Management Sciences 41:3, pages 201-222.
Read now
Read now
Surajit Pal & Susanta Kumar Gauri. (2022) Evaluating capability of a process with ordinal responses. Communications in Statistics - Simulation and Computation 51:6, pages 2871-2887.
Read now
Read now
Rubén Darío Guevara G & Tania Alejandra López. (2022) Process capability vector for multivariate nonlinear profiles. Journal of Statistical Computation and Simulation 92:6, pages 1292-1321.
Read now
Read now
Florence Leony & Chen-ju Lin. (2022) The PO bootstrap approach for comparing process incapability applied to non-normal process selection. Quality Technology & Quantitative Management 19:2, pages 215-233.
Read now
Read now
Sumit Kumar, Abhimanyu Singh Yadav, Sanku Dey & Mahendra Saha. (2022) Parametric inference of generalized process capability index C for the power Lindley distribution. Quality Technology & Quantitative Management 19:2, pages 153-186.
Read now
Read now
Dwi Yuli Rakhmawati & Kwang-Jae Kim. (2022) Performance comparison of generalized confidence interval and modified sampling distribution approaches for assessing one-sided capability indices with gauge measurement errors. Communications in Statistics - Theory and Methods 51:3, pages 685-700.
Read now
Read now
A. Pakzad, H. Razavi & B. Sadeghpour Gildeh. (2022) Developing loss-based functional process capability indices for simple linear profile. Journal of Statistical Computation and Simulation 92:1, pages 115-144.
Read now
Read now
İklim Gedik Balay. (2021) Estimation of the generalized process capability index C based on bias-corrected maximum-likelihood estimators for the generalized inverse Lindley distribution and bootstrap confidence intervals. Journal of Statistical Computation and Simulation 91:10, pages 1960-1979.
Read now
Read now
Sanku Dey, Chunfang Zhang & Mahendra Saha. (2021) Classical and Bayesian estimation of the index C and its confidence intervals for normally distributed quality characteristic. Journal of Statistical Computation and Simulation 91:10, pages 1911-1934.
Read now
Read now
Mahdiyeh Erfanian & Bahram Sadeghpour Gildeh. (2021) A new capability index for non-normal distributions based on linex loss function. Quality Engineering 33:1, pages 76-84.
Read now
Read now
M. Jabbari Nooghabi. (2020) Process capability indices in normal distribution with the presence of outliers. Journal of Applied Statistics 47:13-15, pages 2443-2478.
Read now
Read now
Mahendra Saha, Sumit Kumar, Sudhansu S. Maiti, Abhimanyu Singh Yadav & Sanku Dey. (2020) Asymptotic and Bootstrap Confidence Intervals for the Process Capability Index c Based on Lindley Distributed Quality Characteristic. American Journal of Mathematical and Management Sciences 39:1, pages 75-89.
Read now
Read now
Sanku Dey & Mahendra Saha. (2020) Bootstrap confidence intervals of process capability index S using different methods of estimation. Journal of Statistical Computation and Simulation 90:1, pages 28-50.
Read now
Read now
Seyedeh Azadeh Fallah Mortezanejad, Gholamreza Mohtashami Borzadaran & Bahram Sadeghpour Gildeh. (2019) An entropic structure in capability indices. Communications in Statistics - Theory and Methods 48:23, pages 5911-5921.
Read now
Read now
Vasileios Alevizakos & Christos Koukouvinos. (2019) An asymptotic confidence interval for the process capability index C. Communications in Statistics - Theory and Methods 48:20, pages 5138-5144.
Read now
Read now
Zih-Huei Wang & Chien-Wei Wu. (2019) An improved sampling plan by variables inspection with consideration of process yield and quality loss. Journal of Statistical Computation and Simulation 89:13, pages 2395-2409.
Read now
Read now
Sanku Dey & Mahendra Saha. (2019) Bootstrap confidence intervals of generalized process capability index C using different methods of estimation. Journal of Applied Statistics 46:10, pages 1843-1869.
Read now
Read now
Shafiq Ahmad, Moath Alatefi, Mohammad Alkahtani, Saqib Anwar, Mohamed Sharaf & Mali Abdollahian. (2019) Bibliometric analysis for process capability research. Quality Technology & Quantitative Management 16:4, pages 459-477.
Read now
Read now
Zainab Abbasi Ganji & Bahram Sadeghpour Gildeh. (2019) A new multivariate process capability index. Total Quality Management & Business Excellence 30:5-6, pages 525-536.
Read now
Read now
Chung-Ho Chen. (2019) Modified Pulak & Al-Sultan’s model with specified C value. Journal of Statistics and Management Systems 22:3, pages 557-562.
Read now
Read now
S. Balamurali & M. Usha. (2019) Determination of an efficient variables sampling system based on the Taguchi process capability index. Journal of the Operational Research Society 70:3, pages 420-432.
Read now
Read now
Chung-Ho Chen & Chao-Yu Chou. (2018) Economic design of product and process parameters under the specified process capability value. Quality Technology & Quantitative Management 15:6, pages 686-701.
Read now
Read now
Mahendra Saha, Sanku Dey & Sudhansu S. Maiti. (2018) Parametric and non-parametric bootstrap confidence intervals of C for exponential power distribution. Journal of Industrial and Production Engineering 35:3, pages 160-169.
Read now
Read now
S Balamurali, Muhammad Aslam & Ahmad Liaquat. (2018) Determination of a new mixed variable lot-size multiple dependent state sampling plan based on the process capability index. Communications in Statistics - Theory and Methods 47:3, pages 615-627.
Read now
Read now
Olatunde A. Adeoti & John O. Olaomi. (2018) Capability index-based control chart for monitoring process mean using repetitive sampling. Communications in Statistics - Theory and Methods 47:2, pages 493-507.
Read now
Read now
Vidhika Tiwari & N. K. Singh. (2017) Process capability index for bivariate exponentially distributed quality characteristics and its sampling properties. Communications in Statistics - Theory and Methods 46:22, pages 11099-11109.
Read now
Read now
M. Usha & S. Balamurali. (2017) Designing of a mixed-chain sampling plan based on the process capability index with chain sampling as the attributes plan. Communications in Statistics - Theory and Methods 46:21, pages 10456-10475.
Read now
Read now
Mohammad Saber Fallah Nezhad & Sina Seifi. (2017) Designing optimal double-sampling plan based on process capability index. Communications in Statistics - Theory and Methods 46:13, pages 6624-6634.
Read now
Read now
Chung-Ho Chen & Chao-Yu Chou. (2017) The joint determination of specification limits, process mean, and economic manufacturing quantity. Journal of Industrial and Production Engineering 34:4, pages 283-288.
Read now
Read now
S. Balamurali & M. Usha. (2017) Developing and designing of an efficient variables sampling system based on the process capability index. Journal of Statistical Computation and Simulation 87:7, pages 1401-1415.
Read now
Read now
Chien-Wei Wu & Zih-Huei Wang. (2017) Developing a variables multiple dependent state sampling plan with simultaneous consideration of process yield and quality loss. International Journal of Production Research 55:8, pages 2351-2364.
Read now
Read now
Chia Huang Wu, Wen Lea Pearn, Yu Ting Tai & Pi Chuan Lin. (2017) Lower confidence bounds as precision measure for truncated processes. Communications in Statistics - Simulation and Computation 46:2, pages 1461-1480.
Read now
Read now
Mohammad Saber Fallah Nezhad & Sina Seifi. (2017) Repetitive group sampling plan based on the process capability index for the lot acceptance problem. Journal of Statistical Computation and Simulation 87:1, pages 29-41.
Read now
Read now
Kun-Tzu Yu & Kuen-Suan Chen. (2016) Testing and analysing capability performance for products with multiple characteristics. International Journal of Production Research 54:21, pages 6633-6643.
Read now
Read now
Z. Abbasi Ganji & B. Sadeghpour Gildeh. (2016) A class of process capability indices for asymmetric tolerances. Quality Engineering 28:4, pages 441-454.
Read now
Read now
Michael Perakis & Evdokia Xekalaki. (2016) On the relationship between process capability indices and the proportion of conformance. Quality Technology & Quantitative Management 13:2, pages 207-220.
Read now
Read now
W. L. Pearn, Chia-Huang Wu & Ching-Ching Chuang. (2016) An effective powerful test for one-sided supplier selection problem with multiple independent characteristics. Quality Technology & Quantitative Management 13:2, pages 182-196.
Read now
Read now
Petros E. Maravelakis. (2016) Process capability indices for data following the Poisson or binomial distribution. Quality Technology & Quantitative Management 13:2, pages 197-206.
Read now
Read now
Chin-Chieh Wu, Jyh-Jen Horng Shiau, W. L. Pearn & Hui-Nien Hung. (2016) A Bayesian approach for group supplier selections based on the popular process-capability-index C. Quality Technology & Quantitative Management 13:2, pages 109-123.
Read now
Read now
Dwi Yuli Rakhmawati, Chao-Lung Yang & Chien-Wei Wu. (2016) Process Capability Assessment for Asymmetric Tolerances with Consideration of Gauge Measurement Errors. Communications in Statistics - Simulation and Computation 45:2, pages 519-547.
Read now
Read now
Mou-Yuan Liao, W.L. Pearn & Yen-Lun Liu. (2015) Assessing the actual Gamma process quality – a curve-fitting approach for modifying the non-normal flexible index. International Journal of Production Research 53:15, pages 4720-4734.
Read now
Read now
Chung-Ho Chen & Chao-Chin Kan. (2015) Tolerance design based on specified process capability value. International Journal of Management Science and Engineering Management 10:3, pages 210-214.
Read now
Read now
Wen Lea Pearn, Chin Chieh Wu & Chia Huang Wu. (2015) Estimating process capability index C: classical approach versus Bayesian approach. Journal of Statistical Computation and Simulation 85:10, pages 2007-2021.
Read now
Read now
Chien-Wei Wu, Tai-Hsi Wu & Tiffany Chen. (2015) Developing a variables repetitive group sampling scheme by considering process yield and quality loss. International Journal of Production Research 53:7, pages 2239-2251.
Read now
Read now
C.H. Wu, W.L. Pearn & C.C. Chuang. (2015) A powerful test for two-sided multiple independent characteristics supplier selection problem. Journal of Statistical Computation and Simulation 85:4, pages 839-853.
Read now
Read now
Chung-Ho Chen, Chao-Yu Chou, Chao-Chin Kan & Michael B. C. Khoo. (2014) Production quantity and specification limits settings by considering specified process capability value. Journal of Industrial and Production Engineering 31:4, pages 229-237.
Read now
Read now
Chung-Ho Chen, Chao-Yu Chou & Chao-Chin Kan. (2014) Economic specification limits and process mean settings by considering unequal target value and specification center. Journal of Industrial and Production Engineering 31:4, pages 199-205.
Read now
Read now
Jung Lyu & Chih-Chin Liang. (2014) Effective approach to quality control for small–medium software companies. Total Quality Management & Business Excellence 25:3-4, pages 296-308.
Read now
Read now
Chien-Wei Wu, Chi-Wei Lin & James C. Chen. (2013) An improved approach for process performance evaluation with the consideration of process yield and quality loss. International Journal of Production Research 51:21, pages 6397-6409.
Read now
Read now
M.Z. Anis & Ishita Basak. (2013) On C
Assessment in the Presence of Tool Wear. Communications in Statistics - Theory and Methods 42:10, pages 1759-1773.
Read now
Read now
Chun-Ying Shen & Kun-Tzu Yu. (2013) Optimization of product design based on a design-function-oriented cost model: a strategic non-throw-away perspective. Journal of Industrial and Production Engineering 30:2, pages 94-104.
Read now
Read now
Bi-Min Hsu, Lin-Ying Hsu & Ming-Hung Shu. (2013) Evaluation of supply chain performance using delivery-time performance analysis chart approach. Journal of Statistics and Management Systems 16:1, pages 73-87.
Read now
Read now
S. Khodaygan & M. R. Movahhedy. (2012) Fuzzy-based analysis of process capability for assembly quality assessment in mechanical assemblies. International Journal of Production Research 50:12, pages 3395-3415.
Read now
Read now
Ching-Ho Yen. (2012) Fuzzy Testing for One-Sided Process Capability Indices. Communications in Statistics - Theory and Methods 41:9, pages 1603-1616.
Read now
Read now
Chun-Ying Shen & Kun-Tzu Yu. (2012) An integrated fuzzy strategic supplier selection approach for considering the supplier integration spectrum. International Journal of Production Research 50:3, pages 817-829.
Read now
Read now
MohammadR. Niavarani, Rassoul Noorossana & Babak Abbasi. (2012) Three New Multivariate Process Capability Indices. Communications in Statistics - Theory and Methods 41:2, pages 341-356.
Read now
Read now
W.
L. Pearn, H.
N. Hung, Y.
S. Chuang & R.
H. Su. (2011) An effective powerful test for one-sided supplier selection problem. Journal of Statistical Computation and Simulation 81:10, pages 1313-1331.
Read now
Read now
Zeinab Ramezani, Abbas Parchami & Mashaallah Mashinchi. (2011) Fuzzy confidence regions for the Taguchi capability index. International Journal of Systems Science 42:6, pages 977-987.
Read now
Read now
Chien-Wei Wu. (2011) Using a novel approach to assess process performance in the presence of measurement errors. Journal of Statistical Computation and Simulation 81:3, pages 301-314.
Read now
Read now
W.L. Pearn & Ya-Ching Cheng. (2010) Measuring production yield for processes with multiple characteristics. International Journal of Production Research 48:15, pages 4519-4536.
Read now
Read now
Chien-Wei Wu & P. H. Huang. (2010) Generalized Confidence Intervals for Comparing the Capability of Two Processes. Communications in Statistics - Theory and Methods 39:13, pages 2351-2364.
Read now
Read now
Wen-Tsann Lin, Shen-Tsu Wang, Meng-Hua Li, Jiung-Ming Huang & Ken-Suan Chen. (2010) An evaluation model for process capability of multiple-process machinery: a case study on the transfer machinery. Journal of Statistics and Management Systems 13:3, pages 445-466.
Read now
Read now
A. Parchami, M. Mashinchi & A. Sharayei. (2010) An effective approach for measuring the capability of manufacturing processes. Production Planning & Control 21:3, pages 250-257.
Read now
Read now
Michael Perakis. (2010) Estimation of differences between process capability indices C
or C
for two processes. Journal of Statistical Computation and Simulation 80:3, pages 315-334.
Read now
Read now
W.L. Pearn, Hui Nien Hung, Ya Ching Cheng & Gu Hong Lin. (2010) Procedure of the convolution method for estimating production yield with sample size information. International Journal of Production Research 48:5, pages 1245-1265.
Read now
Read now
Angus Jeang. (2010) Optimal process capability analysis for process design. International Journal of Production Research 48:4, pages 957-989.
Read now
Read now
Shu-Fei Wu & Mei-Chu Liang. (2010) A note on the asymptotic distribution of the process capability index C
. Journal of Statistical Computation and Simulation 80:2, pages 227-235.
Read now
Read now
A. Parchami & M. Mashinchi. (2010) A new generation of process capability indices. Journal of Applied Statistics 37:1, pages 77-89.
Read now
Read now
W. L. Pearn, Dong-Yuh Yang & Ya-Ching Cheng. (2009) An Improved Approach for Estimating Product Performance Based on the Capability Index C
. Communications in Statistics - Simulation and Computation 38:10, pages 2073-2095.
Read now
Read now
Chien-Wei Wu & Tsai-Yu Lin. (2009) A Bayesian procedure for assessing process performance based on the third-generation capability index. Journal of Applied Statistics 36:11, pages 1205-1223.
Read now
Read now
C. T. Hsieh, K. S. Chen & S. C. Chen. (2009) Quality performance analysis for the whole product family with multiple characteristics: apply the cooling pump as an example. Journal of Statistics and Management Systems 12:5, pages 927-938.
Read now
Read now
Chien-Wei Wu, Ming-Hung Shu, W.
L. Pearn & Feng-Tsung Cheng. (2009) A comparison of methods forsing loss-based capability index. Journal of Statistical Computation and Simulation 79:9, pages 1129-1141.
Read now
Read now
C.H. Yen & W.L. Pearn. (2009) Select better suppliers based on manufacturing precision for processes with multivariate data. International Journal of Production Research 47:11, pages 2961-2974.
Read now
Read now
Wen-Tao Huang & Yao-Tsung Lai. (2009) Selecting the Best Process Based on Capability Index via Empirical Bayes Approach. Communications in Statistics - Theory and Methods 38:10, pages 1576-1588.
Read now
Read now
Jeh-Nan Pan & Chun-Yi Lee. (2009) Development of a New Process Incapability Index with an Application to the Evaluation of Manufacturing Risk. Communications in Statistics - Theory and Methods 38:8, pages 1133-1153.
Read now
Read now
Clara Novoa & Noel Artiles-Leon. (2008) On the Distribution of the Usual Estimator of C
and Some Applications in SPC. Quality Engineering 21:1, pages 24-32.
Read now
Read now
C.-W. Wu, M. H. Shu, W. L. Pearn & K. H. Liu. (2008) Bootstrap approach for supplier selection based on production yield. International Journal of Production Research 46:18, pages 5211-5230.
Read now
Read now
Dja-Shin Wang, Tong-Yuan Koo & Chao-Yu Chou. (2008) Multiple streams process capability analysis chart. Journal of Information and Optimization Sciences 29:5, pages 835-847.
Read now
Read now
K. S. Chen, M. L. Huang & Y. H. Hung. (2008) Process capability analysis chart with the application of
. International Journal of Production Research 46:16, pages 4483-4499.
Read now
Read now
C. H. Hung & J. C. Su. (2008) Group evaluation of body mass index. Journal of Statistics and Management Systems 11:3, pages 439-445.
Read now
Read now
Lee-Ing Tong, Hsi-Tien Chen & Yu-Fang Tai. (2008) Constructing BCa Bootstrap Confidence Interval for the Difference between Two Non-normal Process Capability Indices C
. Quality Engineering 20:2, pages 209-220.
Read now
Read now
Y. C. Chang, W. L. Pearn & Chien-Wei Wu. (2007) On the Sampling Distributions of the Estimated Process Loss Indices with Asymmetric Tolerances. Communications in Statistics - Simulation and Computation 36:6, pages 1153-1170.
Read now
Read now
W L Pearn, Y-C Hsu & J-J Horng Shiau. (2007) Tool replacement policy for one-sided processes with low fraction defective. Journal of the Operational Research Society 58:8, pages 1075-1083.
Read now
Read now
Chien-Wei Wu, W.L. Pearn, C.S. Chang & H.C. Chen. (2007) Accuracy Analysis of the Percentile Method for Estimating Non Normal Manufacturing Quality. Communications in Statistics - Simulation and Computation 36:3, pages 657-697.
Read now
Read now
H. T. Chen & K. S. Chen. (2007) Advanced multi-process performance analysis chart for an entire product with joint confidence regions. International Journal of Production Research 45:9, pages 2141-2159.
Read now
Read now
Gu-Hong Lin, Wern-Kueir Jehng, Kuang-Han Hsieh, Lai-Wang Wang & Shun-Te Lai. (2007) A Bayesian approach on monitoring process capability. Journal of Statistics and Management Systems 10:2, pages 241-252.
Read now
Read now
L. Chang, S. C. Chen & C. Y. Hsieh. (2007) Capability indices for non-normal populations. Journal of Statistics and Management Systems 10:2, pages 183-193.
Read now
Read now
W.
L. Pearn, Y.
C. Chang & Chien-Wei Wu. (2006) Measuring Process Performance Based on Expected Loss with Asymmetric Tolerances. Journal of Applied Statistics 33:10, pages 1105-1120.
Read now
Read now
C. H. Hung. (2006) A study on group evaluation with body mass index. Journal of Statistics and Management Systems 9:3, pages 651-660.
Read now
Read now
W. L. Pearn, F. K. Wang & C. H. Yen. (2006) Measuring production yield for processes with multiple quality characteristics. International Journal of Production Research 44:21, pages 4649-4661.
Read now
Read now
W.L. Pearn, P.C. Lin, Y.C. Chang & Chien-Wei Wu. (2006) Quality yield measure for processes with asymmetric tolerances. IIE Transactions 38:8, pages 619-633.
Read now
Read now
Gu-Hong Lin. (2006) A hypothesis testing procedure on assessing process performance. Journal of Statistics and Management Systems 9:2, pages 319-339.
Read now
Read now
W. L. Pearn, Ya-Chen Hsu & Chien-Wei Wu. (2006) Tool replacement for production with a low fraction of defectives. International Journal of Production Research 44:12, pages 2313-2326.
Read now
Read now
W. L. Pearn, Y. C. Chang & Chien-Wei Wu. (2006) Multiple-process performance analysis chart based on process loss indices. International Journal of Systems Science 37:7, pages 429-435.
Read now
Read now
K. S. Chen & M. L. Huang. (2006) Performance measurement for a manufacturing system based on quality, cost and time. International Journal of Production Research 44:11, pages 2221-2243.
Read now
Read now
W L Pearn & Chien-Wei Wu. (2006) Variables sampling plans with PPM fraction of defectives and process loss consideration. Journal of the Operational Research Society 57:4, pages 450-459.
Read now
Read now
Tung
Liang Liao, Mei-Chu Ke, Kuen-Shan Chen & Hsin-Yuan Wu. (2006) Performance examination of the operations of a bank teller. Journal of Statistics and Management Systems 9:1, pages 165-174.
Read now
Read now
C. H. Liao, P. C. Lin & T. C. Hsia. (2006) Evaluating the performance of the official document. Journal of Statistics and Management Systems 9:1, pages 151-163.
Read now
Read now
C. H. Leu, M. Y. Liao & K. S. Chen. (2006) Selecting a Better Supplier by Testing Unilateral Specification Process Capability Indices C and C. American Journal of Mathematical and Management Sciences 26:3-4, pages 329-354.
Read now
Read now
K. S. Chen & K. L. Chen. (2006) Supplier selection by testing the process incapability index. International Journal of Production Research 44:3, pages 589-600.
Read now
Read now
Hung-Chin Lin. (2006) USING NORMAL APPROXIMATION ON TESTING AND DETERMINING SAMPLE SIZE FOR C
pk
. Journal of the Chinese Institute of Industrial Engineers 23:1, pages 1-11.
Read now
Read now
W.
L. Pearn, M.
H. Shu & B.
M. Hsu. (2005) Testing process capability based on C
in the presence of random measurement errors. Journal of Applied Statistics 32:10, pages 1003-1024.
Read now
Read now
W. L. Pearn
, M. H. Shu & B. M. Hsu. (2005) Monitoring manufacturing quality for multiple Li-BPIC processes based on capability index C
. International Journal of Production Research 43:12, pages 2493-2512.
Read now
Read now
HUNG-CHIN LIN & GWO-JI J. SHEEN. (2005) An Approximation Approach for Making Decisions in Assessing the Capability Index C
pk from the Subsamples. Communications in Statistics - Simulation and Computation 34:1, pages 191-202.
Read now
Read now
HOUSILA P. SINGH & SHARAD SAXENA. (2005) Bayesian and Shrinkage Estimation of Process Capability Index C
. Communications in Statistics - Theory and Methods 34:1, pages 205-228.
Read now
Read now
Hung-Chin Lin. (2005) The Asymptotic Distributions of Unified Process Capability Indices. Communications in Statistics - Theory and Methods 33:4, pages 909-918.
Read now
Read now
W.L. Pearn & Chien-Wei Wu. (2005) AN EFFECTIVE MODERN APPROACH FOR MEASURING HIGH-TECH PRODUCT MANUFACTURING PROCESS QUALITY. Journal of the Chinese Institute of Industrial Engineers 22:2, pages 119-133.
Read now
Read now
Wen-Pei Sung, Ming-Hsiang Shih & Kuen-Suan Chen. (2005) Evaluation method for the optimum seismic energy dissipation performance of displacement dependent seismic-active hydraulic damper. Journal of Statistics and Management Systems 8:2, pages 261-273.
Read now
Read now
M.H. Shu & K.S. Chen. (2005) Estimating Process Capability Indices Based on Subsamples for Asymmetric Tolerances. Communications in Statistics - Theory and Methods 34:2, pages 485-505.
Read now
Read now
M.H. Shu & B.M. Hsu. (2005) Sample size determination for estimating process precision and process loss based on multiple samples with designated accuracy ratio. Journal of Information and Optimization Sciences 26:1, pages 71-91.
Read now
Read now
Lorraine Daniels, Byron Edgar, Richard K. Burdick & Norma Faris Hubele. (2004) Using Confidence Intervals to Compare Process Capability Indices. Quality Engineering 17:1, pages 23-32.
Read now
Read now
W. L. Pearn
, Y. C. Chang & Chien-Wei Wu. (2004) Quality-yield measure for production processes with very low fraction defective. International Journal of Production Research 42:23, pages 4909-4925.
Read now
Read now
Jann-Pygn Chen & K. S. Chen. (2004) Comparing the Capability of Two Processes Using Cpm. Journal of Quality Technology 36:3, pages 329-335.
Read now
Read now
W. L. Pearn, C.-W. Wu & H. C. Lin. (2004) Procedure for supplier selection based on C
applied to super twisted nematic liquid crystal display processes. International Journal of Production Research 42:13, pages 2719-2734.
Read now
Read now
W. L. Pearn, M. H. Shu & B. M. Hsu. (2004) Lower confidence bounds for C
PU and C
PL based on multiple samples with application to production yield assurance. International Journal of Production Research 42:12, pages 2339-2356.
Read now
Read now
M. H. Shu. (2004) Manufacturing capability information for multiple product quality characteristics: a case study to precision voltage reference. Journal of Information and Optimization Sciences 25:2, pages 403-420.
Read now
Read now
Cheng-I. Lin, Wen-Pei Sung & Kuen-Suan Chen. (2004) Study on management method for fireproof duration of constructional material. Journal of Information and Optimization Sciences 25:2, pages 349-360.
Read now
Read now
Brian D. Neureuther & George N. Kenyon. (2004) Quality Improvement under Budgetary and Life-Cycle Constraints. Quality Management Journal 11:2, pages 21-32.
Read now
Read now
Shu-Kai Fan & Ching-Kuei Kao. (2004) LOWER BAYESIAN CONFIDENCE LIMITS ON THE PROCESS CAPABILITY INDEX Cpm: A COMPARATIVE STUDY. Journal of the Chinese Institute of Industrial Engineers 21:5, pages 444-452.
Read now
Read now
Jiung Ming Huang & Ken Suan Chen. (2004) An algorithm of performance evaluation for mould development. Production Planning & Control 15:1, pages 55-62.
Read now
Read now
K. S. Chen, R. K. Li & S. J. Liao. (2004) Process capability analysis of a product family of larger-the-better type. Journal of Information and Optimization Sciences 25:1, pages 93-104.
Read now
Read now
T.W. Chen, J. Y. Lin & K. S. Chen. (2004) Application of Neuro-fuzzy inference for process capability evaluation. Journal of Information and Optimization Sciences 25:1, pages 77-91.
Read now
Read now
Wen-Pei Sung, Kuen-Suan Chen, Wernshyuan Song & Yu-Yin Tsai. (2003) Evaluation Method for Performance of Formwork Process of Construction Industry. Journal of Asian Architecture and Building Engineering 2:2, pages b1-b6.
Read now
Read now
C. C. Wu, K. S. Chen & H. L. Kuo. (2003) Process capability evaluation of a product. Journal of Information and Optimization Sciences 24:3, pages 521-542.
Read now
Read now
S. K. Liang, K. S. Chen & Y. H. Hung. (2003) Measuring banking operation performance by applying a process capability index. Journal of Information and Optimization Sciences 24:2, pages 317-328.
Read now
Read now
Edwin
R. van den Heuvel & Roxana
A. Ion. (2003) Capability Indices and the Proportion of Nonconforming Items. Quality Engineering 15:3, pages 427-439.
Read now
Read now
Michael Perakis & Evdokia Xekalaki. (2003) On a Process Capability Index for Asymmetric Specifications. Communications in Statistics - Theory and Methods 32:7, pages 1459-1492.
Read now
Read now
Sy-Mien Chen & Yu-Sheng Hsu. (2003) Asymptotic analysis of estimators for C
(u, v) based on quantile estimators. Journal of Nonparametric Statistics 15:2, pages 137-150.
Read now
Read now
Chin-Chuan Wu, Liang-Yuh Ouyang & Hsin-Lin Kuo. (2003) BAYESIAN ESTIMATIONS OF SOME PROCESS CAPABILITY INDICES UNDER RESTRICTIVE ASSUMPTIONS. Journal of the Chinese Institute of Industrial Engineers 20:1, pages 49-61.
Read now
Read now
P. C. Lin, W. L. Pearn & K. S. Chen. (2003) Distributional Properties and Implications of the Estimated Process Incapability Index Ĉpp. American Journal of Mathematical and Management Sciences 23:1-2, pages 75-92.
Read now
Read now
W. L Pearn & Ming-Hung Shu. (2003) Lower confidence bounds with sample size information for C
applied to production yield assurance. International Journal of Production Research 41:15, pages 3581-3599.
Read now
Read now
B. Zhang & J. Ni. (2002) Relative Probability Index C
: An Alternative Process Capability Index. Quality Engineering 14:2, pages 267-278.
Read now
Read now
Chin-yao Low, Fong-Jung Yu & Chien-Hua Tsai. (2002) AN APPROACH OF BOOTSTRAP IN CAPABILITY INDICES OF ASYMMETRIC TOLERANCES. Journal of the Chinese Institute of Industrial Engineers 19:2, pages 107-117.
Read now
Read now
Hsi-Tien Chen, Lee-Ing Tong & Kuan-Shan Chen. (2002) ASSESSING THE LIFETIME PERFORMANCE OF ELECTRONIC COMPONENTS BY CONFIDENCE INTERVAL. Journal of the Chinese Institute of Industrial Engineers 19:2, pages 53-60.
Read now
Read now
Samuel Kotz & Norman L. Johnson. (2002) Process Capability Indices—A Review, 1992–2000. Journal of Quality Technology 34:1, pages 2-19.
Read now
Read now
Kuen‐Suan Chen & Wen‐Lee Pearn. (2001) Capability indices for processes with asymmetric tolerances. Journal of the Chinese Institute of Engineers 24:5, pages 559-568.
Read now
Read now
DonaldS. Holmes & A. Erhan Mergen. (2001) MEASURING PROCESS PERFORMANCE FOR MULTIPLE VARIABLES: REVISITED. Quality Engineering 13:4, pages 661-665.
Read now
Read now
Alan M Polansky. (2001) A Smooth Nonparametric Approach to Multivariate Process Capability. Technometrics 43:2, pages 199-211.
Read now
Read now
Yi-Ping Chang. (2001) GENERALIZED CONFIDENCE INTERVALS FOR THE PROCESS CAPABILITY INDICES. Journal of the Chinese Institute of Industrial Engineers 18:2, pages 11-20.
Read now
Read now
A.B. Yeh & H. Chen. (2001) A Nonparametric Multivariate Process Capability Index. International Journal of Modelling and Simulation 21:3, pages 218-223.
Read now
Read now
K. S. Chen, M. L. Huang & R. K. Li. (2001) Process capability analysis for an entire product. International Journal of Production Research 39:17, pages 4077-4087.
Read now
Read now
Jutta Jessenberger & Claus Weihs. (2000) A Note on the Behavior of C with Asymmetric Specification Limits. Journal of Quality Technology 32:4, pages 440-443.
Read now
Read now
Kuen
Suan Chen & Sheng‐Lung Kuo. (2000) An effective method for the activities of environmental analysis. Journal of the Chinese Institute of Engineers 23:5, pages 575-581.
Read now
Read now
F. K. Wang, Norma F. Hubele, Frederick P. Lawrence, John D. Miskulin & Hamid Shahriari. (2000) Comparison of Three Multivariate Process Capability Indices. Journal of Quality Technology 32:3, pages 263-275.
Read now
Read now
D. W. McCormack,$suffix/text()$suffix/text(), IanR. Harris, ArnonM. Hurwitz & PatrickD. Spagon. (2000) CAPABILITY INDICES FOR NON-NORMAL DATA. Quality Engineering 12:4, pages 489-495.
Read now
Read now
W. L. Pearn &
G. H. Lin. (2000) Estimating capability index cpk for processes with asymmetric tolerances. Communications in Statistics - Theory and Methods 29:11, pages 2593-2604.
Read now
Read now
Murali Niverthi & Dipak K. Dey. (2000) Multivariate process capability a bayesian perspective. Communications in Statistics - Simulation and Computation 29:2, pages 667-687.
Read now
Read now
Wagner Borges & Linda Lee Ho. (2000) On the sampling distribution of clement's capability index. Communications in Statistics - Simulation and Computation 29:1, pages 121-138.
Read now
Read now
K. S. Chen & H. H. Pang. (1999) 供應商之交期績縫量. Journal of the Chinese Institute of Industrial Engineers 16:6, pages 681-688.
Read now
Read now
Y. Zhang & X. Daniel Fang. (1999) TARGET ALLOCATION FOR MAXIMIZING WEAR ALLOWANCE OF RUNNING FITS BASED ON PROCESS CAPABILITY. Quality Engineering 12:2, pages 169-176.
Read now
Read now
W. L. Pearn, K. L. Chen & C. H. Ko. (1999) 應用製程能力弱度指標C
評估有目標値TT之製程能力. Journal of the Chinese Institute of Industrial Engineers 16:4, pages 519-531.
Read now
Read now
S.
Subba Rao & Weidong Xia. (1999) Measuring quality by process capability indices and the effects of non-normality. Journal of Statistics and Management Systems 2:2-3, pages 127-142.
Read now
Read now
JohnJ. Flaig. (1999) PROCESS CAPABILITY SENSITIVITY ANALYSIS. Quality Engineering 11:4, pages 587-592.
Read now
Read now
Mahmut Parlar & George O. Wesolowsky. (1999) Specification Limits, Capability Indices, and Process Centering in Assembly Manufacture. Journal of Quality Technology 31:3, pages 317-325.
Read now
Read now
Weishing Chen. (1999) Apply a general percentile method to evaluate process capability indices. Journal of the Chinese Institute of Industrial Engineers 16:2, pages 287-297.
Read now
Read now
Mats Deleryd, Johan Deltin & Bengt Klefsjö. (1999) Critical Factors for Successful Implementation of Process Capability Studies. Quality Management Journal 6:1, pages 40-59.
Read now
Read now
W. L. Pearn. (1998) New generalization of process capability index Cpk. Journal of Applied Statistics 25:6, pages 801-810.
Read now
Read now
W. L. Pearn & C. S. Chang. (1998) AN IMPLEMENTATION OF THE PRECISION INDEX FOR CONTAMINATED PROCESSES. Quality Engineering 11:1, pages 101-110.
Read now
Read now
DonaldS. Holmes & A. Erhan Mergen. (1998) MEASURING PROCESS PERFORMANCE FOR MULTIPLE VARIABLES. Quality Engineering 11:1, pages 55-59.
Read now
Read now
F. K. Wang & JamesC. Chen. (1998) CAPABILITY INDEX USING PRINCIPAL COMPONENTS ANALYSIS. Quality Engineering 11:1, pages 21-27.
Read now
Read now
Peter A Wright. (1998) The probability density function of process capability index Cpmk
. Communications in Statistics - Theory and Methods 27:7, pages 1781-1789.
Read now
Read now
W.L. Pearn,
G.H. Lin &
K.S. Chen. (1998) Distributional and inferential properties of the process accuracy and process precision indices. Communications in Statistics - Theory and Methods 27:4, pages 985-1000.
Read now
Read now
Arthur B. Yeh & Sumankumar Bhattcharya. (1998) A robust process capability index. Communications in Statistics - Simulation and Computation 27:2, pages 565-589.
Read now
Read now
Kerstin Vännman. (1998) Families of Capability Indices for One-Sided Specification Limits. Statistics 31:1, pages 43-66.
Read now
Read now
L. S. Zimmer & N. F. Hubele. (1997) QUANTILES OF THE SAMPLING DISTRIBLITION OF C. Quality Engineering 10:2, pages 309-329.
Read now
Read now
K. S. Chen. (1997) 一個適用於非對稱規格區間的新製程能力指標. Journal of the Chinese Institute of Industrial Engineers 14:4, pages 355-362.
Read now
Read now
W. L. Pearn & K. S. Chen. (1997) MULTIPROCESS PERFORMANCE ANALYSIS: A CASE STUDY. Quality Engineering 10:1, pages 1-8.
Read now
Read now
W. L. Pearn & K. S. Chen. (1997) A PRACTICAL IMPLEMENTATION OF THE PROCESS CAPABILITY INDEX Cpk
. Quality Engineering 9:4, pages 721-737.
Read now
Read now
Sy-Mien Chen &
W. L. Pearn. (1997) The asymptotic distribution of the estimated process capability index Cpk
. Communications in Statistics - Theory and Methods 26:10, pages 2489-2497.
Read now
Read now
Kerstin Vännman. (1997) A general class of capability indices in the case of asymmetric tolerances. Communications in Statistics - Theory and Methods 26:8, pages 2049-2072.
Read now
Read now
Kerstin Vännman. (1997) Distribution and moments in simplified form for a general class of capability indices. Communications in Statistics - Theory and Methods 26:1, pages 159-179.
Read now
Read now
W. L. Pearn &
C. S. Chang. (1997) The performance of process capability index csOn Skewed Distributions. Communications in Statistics - Simulation and Computation 26:4, pages 1361-1377.
Read now
Read now
Hanfeng Chen. (1997) Asymptotic Analysis of a Class of Process Capability Indices. Statistics 30:2, pages 149-162.
Read now
Read now
Fred A. Spiring. (1997) A Unifying Approach to Process Capability Indices. Journal of Quality Technology 29:1, pages 49-58.
Read now
Read now
Nicolas R. Faddoul, John R. English & G. Don Taylor. (1996) The Impact of Mixture Distributions in Classical Process Capability Analysis. IIE Transactions 28:12, pages 957-966.
Read now
Read now
Z. ZHANG & X. D. FANG‡. (1996) Fit capability indices and their applications. International Journal of Production Research 34:11, pages 3079-3094.
Read now
Read now
C. Ming Wang & C. Teresa Lam. (1996) Confidence Limits for Proportion of Conformance. Journal of Quality Technology 28:4, pages 439-445.
Read now
Read now
Hanfeng Chen & Samuel Kotz. (1996) An asymptotic distribution of wright’s process capability index sensitive to skewness. Journal of Statistical Computation and Simulation 55:1-2, pages 147-158.
Read now
Read now
StevenE. Somerville & DouglasC. Montgomery. (1996) PROCESS CAPABILITY INDICES AND NON-NORMAL DISTRIBUTIONS. Quality Engineering 9:2, pages 305-316.
Read now
Read now
Yazhen Wang &
K.S. Chen. (1996) The L2risk of an isotonic estimate. Communications in Statistics - Theory and Methods 25:2, pages 281-294.
Read now
Read now
W.L. pearn &
K.S. chen. (1996) A bayesian-like estimator of cpk
. Communications in Statistics - Simulation and Computation 25:2, pages 321-329.
Read now
Read now
Peter A. Wright. (1995) A process capability index sensitive to skewness. Journal of Statistical Computation and Simulation 52:3, pages 195-203.
Read now
Read now
FredA. Spiring. (1995) Process capability: A total quality management tool. Total Quality Management 6:1, pages 21-34.
Read now
Read now
Sy-Mien Chen & Nai-Feng Hsu. (1995) The asymptotic distribution of the process capability index C
. Communications in Statistics - Theory and Methods 24:5, pages 1279-1291.
Read now
Read now
W. L. PEARN & SAMUEL KOTZ. (1994) APPLICATION OF CLEMENTS' METHOD FOR CALCULATING SECOND- AND THIRD-GENERATION PROCESS CAPABILITY INDICES FOR NON-NORMAL PEARSONIAN POPULATIONS. Quality Engineering 7:1, pages 139-145.
Read now
Read now
Russell A Boyles. (1994) Brocess capability with asymmetric tolerances. Communications in Statistics - Simulation and Computation 23:3, pages 615-635.
Read now
Read now
Georges H. Guirguis & Robert N. Rodriguez. (1992) Computation of Owen's Q Function Applied to Process Capability Analysis. Journal of Quality Technology 24:4, pages 236-246.
Read now
Read now
Leroy A. Franklin & Gary S. Wasserman. (1992) Bootstrap Lower Confidence Limits for Capability Indices. Journal of Quality Technology 24:4, pages 196-210.
Read now
Read now
Robert N. Rodriguez. (1992) Recent Developments in Process Capability Analysis. Journal of Quality Technology 24:4, pages 176-187.
Read now
Read now
Articles from other publishers (319)
Aylin Pakzad, Saeed Adibfar, Hamideh Razavi & Rassoul Noorossana. (2023) Process capability analysis for simple linear profiles. Quality & Quantity 58:3, pages 2183-2211.
Crossref
Crossref
Displaying 200 of 518 citing articles. Use the download link below to view the full list of citing articles.
Download full citations list