Citations (126)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (44)
Masoud Tavakoli, Ali Akbar Heydari & Sahera Hussein Zain AL–Thalabi. (2024) Control Charts for Exponentially Distributed Characteristics: SD, ED, ESD with Taguchi’s Loss Function. Applied Artificial Intelligence 38:1.
Read now
Read now
Masoud Tavakoli & Ali Akbar Heydari. (2023) Control chart for exponential individual samples with adaptive sampling interval method based on economic statistical design: an extension of costa and Rahim’s model. Communications in Statistics - Theory and Methods 52:14, pages 4993-5009.
Read now
Read now
Muhammad Aslam. (2023) An insight into control charts using EWMA. Communications in Statistics - Theory and Methods 52:5, pages 1507-1511.
Read now
Read now
Mohammad Rasouli, Hamid Shahriari & Yaser Samimi. (2022) Monitoring a bi-attribute high-quality process using a mixture probability distribution. Communications in Statistics - Simulation and Computation 51:12, pages 7427-7443.
Read now
Read now
Marzieh Khakifirooz, V. G. Tercero-Gómez & W. H. Woodall. (2021) The role of the normal distribution in statistical process monitoring. Quality Engineering 33:3, pages 497-510.
Read now
Read now
Manuel Cabral Morais. (2017) ARL-unbiased geometric and CCC control charts. Sequential Analysis 36:4, pages 513-527.
Read now
Read now
M. Aslam, M. Azam & C.-H. Jun. (2017) A new sampling plan under the exponential distribution. Communications in Statistics - Theory and Methods 46:2, pages 644-652.
Read now
Read now
Sang Joon Um & Jong Gurl Kim. (2016) A simultaneous control scheme for mean and fraction non conforming in small process variation. Communications in Statistics - Theory and Methods 45:16, pages 4745-4759.
Read now
Read now
S. K. Khilare & D. T. Shirke. (2014) The Steady-State Performance of Cumulative Count of a Conforming Control Chart Based On Runs Rules. Communications in Statistics - Theory and Methods 43:15, pages 3135-3147.
Read now
Read now
Jian Li, Fugee Tsung & Changliang Zou. (2014) Multivariate binomial/multinomial control chart. IIE Transactions 46:5, pages 526-542.
Read now
Read now
William H. Woodall & Douglas C. Montgomery. (2014) Some Current Directions in the Theory and Application of Statistical Process Monitoring. Journal of Quality Technology 46:1, pages 78-94.
Read now
Read now
Eleftheriou Mavroudis & Farmakis Nicolas. (2013) EWMA Control Charts for Monitoring High Yield Processes. Communications in Statistics - Theory and Methods 42:20, pages 3639-3654.
Read now
Read now
Jelena
V. Vlajic, Sander
W.M. van Lokven, René Haijema & Jack
G.A.J. van der Vorst. (2013) Using vulnerability performance indicators to attain food supply chain robustness. Production Planning & Control 24:8-9, pages 785-799.
Read now
Read now
Eduardo Santiago & Joel Smith. (2013) Control Charts Based on the Exponential Distribution: Adapting Runs Rules for the t Chart. Quality Engineering 25:2, pages 85-96.
Read now
Read now
Shih-Chou Kao. (2010) Normalization of the origin-shifted exponential distribution for control chart construction. Journal of Applied Statistics 37:7, pages 1067-1087.
Read now
Read now
Zhang Wu & Jianxin Jiao. (2008) A control chart for monitoring process mean based on attribute inspection. International Journal of Production Research 46:15, pages 4331-4347.
Read now
Read now
C.
D. Lai & K. Govindaraju. (2008) Reduction of control-chart signal variablity for high-quality processes. Journal of Applied Statistics 35:6, pages 671-679.
Read now
Read now
Arthur B. Yeh, Richard N. Mcgrath, Mark A. Sembower & Qi Shen. (2008) EWMA control charts for monitoring high-yield processes based on non-transformed observations. International Journal of Production Research 46:20, pages 5679-5699.
Read now
Read now
Tee Chin Chang & Fah Fatt Gan. (2007) Modified Shewhart Charts for High Yield Processes. Journal of Applied Statistics 34:7, pages 857-877.
Read now
Read now
Ji Ying Liu, Min Xie, Thong Ngee Goh & L. Y. Chan. (2007) A study of EWMA chart with transformed exponential data. International Journal of Production Research 45:3, pages 743-763.
Read now
Read now
J. Y. Liu, M. Xie & T. N. Goh. (2006) CUSUM Chart with Transformed Exponential Data. Communications in Statistics - Theory and Methods 35:10, pages 1829-1843.
Read now
Read now
Shih-Chou Kao, Chuan-Ching Ho & Ying-Chin Ho. (2006) Transforming the exponential by minimizing the sum of the absolute differences. Journal of Applied Statistics 33:7, pages 691-702.
Read now
Read now
William H. Woodall. (2006) The Use of Control Charts in Health-Care and Public-Health Surveillance. Journal of Quality Technology 38:2, pages 89-104.
Read now
Read now
M. P. Gadre & R. N. Rattihalli. (2006) Modified Group Runs Control Charts to Detect Increases in Fraction Non Conforming and Shifts in the Process Mean. Communications in Statistics - Simulation and Computation 35:1, pages 225-240.
Read now
Read now
Loon-Ching Tang & Wee-Tat Cheong. (2006) A Control Scheme for High-Yield Correlated Production under Group Inspection. Journal of Quality Technology 38:1, pages 45-55.
Read now
Read now
M. P. Gadre & R. N. Rattihalli. (2005) Unit and Group-Runs Chart to Identify Increases in Fraction Nonconforming. Journal of Quality Technology 37:3, pages 199-209.
Read now
Read now
Yue Fang. (2003) c-charts, X-charts, and the Katz Family of Distributions. Journal of Quality Technology 35:1, pages 104-114.
Read now
Read now
V. KURALMANI, M. XIE, T.N. GOH & F.F. GAN. (2002) A conditional decision procedure for high yield processes. IIE Transactions 34:12, pages 1021-1030.
Read now
Read now
Zhenlin Yang, Min Xie, Vellaisamy Kuralmani & Kwok-Leung Tsui. (2002) On the Performance of Geometric Charts with Estimated Control Limits. Journal of Quality Technology 34:4, pages 448-458.
Read now
Read now
Zhang Wu, Song Huat Yeo & Trevor A. Spedding. (2001) A Synthetic Control Chart for Detecting Fraction Nonconforming Increases. Journal of Quality Technology 33:1, pages 104-111.
Read now
Read now
Zhenlin Yang & Min Xie. (2000) Process monitoring of exponentially distributed characteristics through an optimal normalizing transformation. Journal of Applied Statistics 27:8, pages 1051-1063.
Read now
Read now
C. D. Lai, M. Xie & K. Govindaraju. (2000) Study of a Markov model for a high-quality dependent process. Journal of Applied Statistics 27:4, pages 461-473.
Read now
Read now
Layth C. Alwan. (2000) Designing an effective exponential cusum chart without the use of nomographs. Communications in Statistics - Theory and Methods 29:12, pages 2879-2893.
Read now
Read now
X. S. Lu,
M. Xie &
T. N. Goh. (2000) An investigation of the effects of inspection errors on the run-length control charts. Communications in Statistics - Simulation and Computation 29:1, pages 315-335.
Read now
Read now
Zhang Wu & Trevor A. Spedding. (2000) Implementing Synthetic Control Charts. Journal of Quality Technology 32:1, pages 75-78.
Read now
Read now
Zhang Wu & Trevor A. Spedding. (2000) A Synthetic Control Chart for Detecting Small Shifts in the Process Mean. Journal of Quality Technology 32:1, pages 32-38.
Read now
Read now
Rudolf G. Kittlitz$suffix/text()$suffix/text(). (1999) Transforming the Exponential for SPC Applications. Journal of Quality Technology 31:3, pages 301-308.
Read now
Read now
Lloyd S. Nelson. (1999) Notes on the Shewhart Control Chart. Journal of Quality Technology 31:1, pages 124-126.
Read now
Read now
K. Govindaraju & C. D. Lai. (1998) STATISTICAL DESIGN OF CONTROL SCHEMES FOR LOW FRACTION NONCONFORMING. Quality Engineering 11:1, pages 15-19.
Read now
Read now
C. D. Lai, K. Govindaraju & M. Xie. (1998) Effects of correlation on fraction non-conforming statistical process control procedures. Journal of Applied Statistics 25:4, pages 535-543.
Read now
Read now
John I. McCool & Tracy Joyner-Motley. (1998) Control Charts Applicable When the Fraction Nonconforming is Small. Journal of Quality Technology 30:3, pages 240-247.
Read now
Read now
M.S. Bebbington &
C.D. Lai. (1998) A generalized negative binomial and applications. Communications in Statistics - Theory and Methods 27:10, pages 2515-2533.
Read now
Read now
William H. Woodall. (1997) Control Charts Based on Attribute Data: Bibliography and Review. Journal of Quality Technology 29:2, pages 172-183.
Read now
Read now
Thomas P. Ryan & Neil C. Schwertman. (1997) Optimal Limits for Attributes Control Charts. Journal of Quality Technology 29:1, pages 86-98.
Read now
Read now
Articles from other publishers (82)
Jiao Yu, Qinyi Wang & Chunjie Wu. (2024) Online monitoring of the Weibull distributed process based on progressive Type II censoring scheme. Journal of Computational and Applied Mathematics 443, pages 115744.
Crossref
Crossref
Yajie Bai, Jyun-You Chiang, Wen Liu & Zhengcheng Mou. (2024) An enhanced EWMA chart with variable sampling interval scheme for monitoring the exponential process with estimated parameter. Scientific Reports 14:1.
Crossref
Crossref
亚洁 张. (2024) EEWMA High-Quality Process Control Based on Data Power Transformation. Advances in Applied Mathematics 13:01, pages 255-268.
Crossref
Crossref
Zahid Rasheed, Hongying Zhang & Syed Masroor Anwar. (2023) Reassessment of performance evaluation of EWMA control chart for exponential process. Quality and Reliability Engineering International.
Crossref
Crossref
Maleeh Effendi, Amy Roberto & Elizabeth Dale Slater. (2023) Reducing Central Line-Associated Bloodstream Infections in a Burn Intensive Care Unit: Using a Business Framework for Quality Improvement. Journal of Burn Care & Research 44:5, pages 1073-1082.
Crossref
Crossref
Khaled Janada, Hassan Soltan, Mohamed-Sobeih Hussein & Ahmad Abdel-Shafi. (2022) Angular Control Charts: A new perspective for monitoring reliability of multi-state systems. Computers & Industrial Engineering 172, pages 108621.
Crossref
Crossref
Masoud Tavakoli. (2022) Economic Design for Exponential Control Chart: Applying Taguchi’s Loss Function and Employing Genetic Algorithm. Lobachevskii Journal of Mathematics 43:9, pages 2611-2620.
Crossref
Crossref
Yang Zhang, Yanfen Shang, Xuelong Hu & An‐Da Li. (2022) An improved exponential EWMA chart for monitoring time between events. Quality and Reliability Engineering International 38:5, pages 2748-2768.
Crossref
Crossref
Arne Johannssen, Nataliya Chukhrova, Giovanni Celano & Philippe Castagliola. (2022) A number‐between‐events control chart for monitoring finite horizon production processes. Quality and Reliability Engineering International 38:4, pages 2110-2138.
Crossref
Crossref
Muhammad Saleem, Nasrullah Khan & Muhammad Aslam. (2022) Monitoring Betaine Using Interval Time Between Events Control Chart. Frontiers in Nutrition 9.
Crossref
Crossref
Yu‐Ching Chang & Yi‐Cheng Wu. (2021) A parameter‐free exponential control chart based on Kullback‐Leibler information for time‐between‐events monitoring. Quality and Reliability Engineering International 38:2, pages 733-756.
Crossref
Crossref
Syed Adil Hussain, Ishfaq Ahmad, Aamir Saghir, Muhammad Aslam & Ibrahim M. Almanjahie. (2021) Mean ranked acceptance sampling plan under exponential distribution. Ain Shams Engineering Journal 12:4, pages 4125-4131.
Crossref
Crossref
Amitava Mitra. 2021. Fundamentals of Quality Control and Improvement. Fundamentals of Quality Control and Improvement
405
469
.
Muhammad Aslam, G. Srinivasa Rao, Muhammad Saleem, Rehan Ahmad Khan Sherwani & Chi-Hyuck Jun. (2021) Monitoring Mortality Caused by COVID-19 Using Gamma-Distributed Variables Based on Generalized Multiple Dependent State Sampling. Computational and Mathematical Methods in Medicine 2021, pages 1-17.
Crossref
Crossref
Muhammad Taqi Shah, Muhammad Azam, Muhammad Aslam & Uzma Sherazi. (2020) Time between events control charts for gamma distribution. Quality and Reliability Engineering International 37:2, pages 785-803.
Crossref
Crossref
Ahmad O. Albazli, Muhammad Aslam & Saeed A. Dobbah. (2020) A Control Chart for Exponentially Distributed Characteristics Using Modified Multiple Dependent State Sampling. Mathematical Problems in Engineering 2020, pages 1-26.
Crossref
Crossref
Nataliya Chukhrova & Arne Johannssen. (2020) Monitoring of high-yield and periodical processes in health care. Health Care Management Science 23:4, pages 619-639.
Crossref
Crossref
Caterina Rizzo, Swee‐Teng Chin, Edwin van den Heuvel & Alessandro Di Bucchianico. (2020) Performance measures of discrete and continuous time‐between‐events control charts. Quality and Reliability Engineering International 36:8, pages 2754-2768.
Crossref
Crossref
Muhammad Aslam, Aamir Saghir & Liaquat Ahmad. 2020. Introduction to Statistical Process Control. Introduction to Statistical Process Control
91
119
.
Nirpeksh Kumar, Amita Baranwal & Subha Chakraborti. (2019) Shewhart‐type Phase II control charts for monitoring times to an event with a guaranteed in‐control and good out‐of‐control performance. Quality and Reliability Engineering International 36:1, pages 231-246.
Crossref
Crossref
Olatunde A Adeoti. (2019) On control chart for monitoring exponentially distributed quality characteristic. Transactions of the Institute of Measurement and Control 42:2, pages 295-305.
Crossref
Crossref
Dushyant Tyagi. (2019) Designing an Effective Combined Shewhart-CUSUM Control Scheme with Exponentially Distributed Data. International Journal of Mathematical, Engineering and Management Sciences 4:5, pages 1277-1286.
Crossref
Crossref
Muhammad Aslam, Muhammad Ali Raza, Liaquat Ahmad & Chi‐Hyuck Jun. (2019) Design of a t‐chart using generalized multiple dependent state sampling. Quality and Reliability Engineering International 35:6, pages 1789-1802.
Crossref
Crossref
Nirpeksh Kumar & Amita Baranwal. (2019)
Design and implementation of
q
th
quantile‐unbiased
t
r
‐chart for monitoring times between events
. Quality and Reliability Engineering International 35:4, pages 1061-1080.
Crossref
Crossref
AliAkbar KazemiNia, Bahram Sadeghpour Gildeh & Zainab Abbasi Ganji. (2018) The design of geometric generalized likelihood ratio control chart. Quality and Reliability Engineering International 34:5, pages 953-965.
Crossref
Crossref
Nasrullah Khan, Muhammad Aslam, Mansour Sattam Aldosari & Chi-Hyuck Jun. (2018) A Multivariate Control Chart for Monitoring Several Exponential Quality Characteristics Using EWMA. IEEE Access 6, pages 70349-70358.
Crossref
Crossref
Dong Ding, Dongdong Xiang & Jian Li. (2017) Directional monitoring of categorical processes with serial dependence. Computers & Industrial Engineering 113, pages 502-511.
Crossref
Crossref
Sajid Ali & Antonio Pievatolo. (2016) High quality process monitoring using a class of inter-arrival time distributions of the renewal process. Computers & Industrial Engineering 94, pages 45-62.
Crossref
Crossref
Nasrullah Khan, Muhammad Aslam & Chi‐Hyuck Jun. (2015) A EWMA Control Chart for Exponential Distributed Quality Based on Moving Average Statistics. Quality and Reliability Engineering International 32:3, pages 1179-1190.
Crossref
Crossref
Byung Jun Kim & Jaeheon Lee. (2015) Adjustment of Control Limits for Geometric Charts. Communications for Statistical Applications and Methods 22:5, pages 519-530.
Crossref
Crossref
Christoph Fusch, David Pogorzelski, Cheryl Main, Carrie‐Lynn Meyer, Salhab el Helou & Dominik Mertz. (2015)
Self‐disinfecting sink drains reduce the
Pseudomonas aeruginosa
bioburden in a neonatal intensive care unit
. Acta Paediatrica 104:8.
Crossref
Crossref
N. Kumar & S. Chakraborti. (2014) Improved Phase I Control Charts for Monitoring Times Between Events. Quality and Reliability Engineering International 31:4, pages 659-668.
Crossref
Crossref
Muhammad Aslam, Muhammad Azam, Nasrullah Khan & Chi-Hyuck Jun. (2014) A control chart for an exponential distribution using multiple dependent state sampling. Quality & Quantity 49:2, pages 455-462.
Crossref
Crossref
Muhammad Aslam, Muhammad Azam & Chi-Hyuck Jun. (2014) A new control chart for exponential distributed life using EWMA. Transactions of the Institute of Measurement and Control 37:2, pages 205-210.
Crossref
Crossref
Huynh Trung Luong & Zin Maung Maung Phyo Htet. 2015. Toward Sustainable Operations of Supply Chain and Logistics Systems. Toward Sustainable Operations of Supply Chain and Logistics Systems
507
519
.
William H. Woodall & Anne R. Driscoll. 2015. Frontiers in Statistical Quality Control 11. Frontiers in Statistical Quality Control 11
15
27
.
Jung‐Tai Chen. (2013) A Shewhart‐type Control Scheme to Monitor Weibull Data without Subgrouping. Quality and Reliability Engineering International 30:8, pages 1197-1214.
Crossref
Crossref
Muhammad Aslam, Nasrullah Khan, Muhammad Azam & Chi-Hyuck Jun. (2014) Designing of a new monitoring t-chart using repetitive sampling. Information Sciences 269, pages 210-216.
Crossref
Crossref
Jason Dever, Thomas A. Mazzuchi, Shahram Sarkani, Matthew J. Mihalcin & Alex Loewenthal. (2013) The Applicability of Statistical Process Control to Systems Involving People Processes and Business Rhythms. Systems Engineering 17:2, pages 193-203.
Crossref
Crossref
Sotiris Bersimis, Markos V. Koutras & Petros E. Maravelakis. (2014) A compound control chart for monitoring and controlling high quality processes. European Journal of Operational Research 233:3, pages 595-603.
Crossref
Crossref
Jung-Tai Chen. (2013) Design of cumulative count of conforming charts for high yield processes based on average number of items inspected. International Journal of Quality & Reliability Management 30:9, pages 942-957.
Crossref
Crossref
Amirhossein Amiri & Ramezan Khosravi. (2013) Identifying time of a monotonic change in the fraction nonconforming of a high-quality process. The International Journal of Advanced Manufacturing Technology 68:1-4, pages 547-555.
Crossref
Crossref
Gordon J. Ross, Dimitris K. Tasoulis & Niall M. Adams. (2012) Sequential monitoring of a Bernoulli sequence when the pre-change parameter is unknown. Computational Statistics 28:2, pages 463-479.
Crossref
Crossref
Min Zhang, Yiming Peng, Anna Schuh, Fadel M. Megahed & William H. Woodall. (2012) Geometric Charts with Estimated Control Limits. Quality and Reliability Engineering International 29:2, pages 209-223.
Crossref
Crossref
Hassan Assareh, Mary A. Waterhouse, Christina Moser, Russell D. Brighouse, Kelley A. Foster, Ian R. Smith & Kerrie Mengersen. (2013) Data Quality Improvement in Clinical Databases Using Statistical Quality Control: Review and Case Study. Therapeutic Innovation & Regulatory Science 47:1, pages 70-81.
Crossref
Crossref
Shahryar Sorooshian. (2013) Basic Developments of Quality Characteristics Monitoring. Journal of Applied Mathematics 2013, pages 1-8.
Crossref
Crossref
Francis Pascual. 2013. Stochastic Orders in Reliability and Risk. Stochastic Orders in Reliability and Risk
331
350
.
Jong-Gurl Kim & Sang-Joon Um. (2012) Design of ALT Control Chart for Small Process Variation. Journal of the Korea Safety Management and Science 14:3, pages 167-174.
Crossref
Crossref
John I. McCool. 2012. Using the Weibull Distribution. Using the Weibull Distribution
73
96
.
Amirhossein Amiri & Ramezan Khosravi. (2012) Estimating the change point of the cumulative count of a conforming control chart under a drift. Scientia Iranica 19:3, pages 856-861.
Crossref
Crossref
Zhiguo Li, Shiyu Zhou, Crispian Sievenpiper & Suresh Choubey. (2011) Statistical Monitoring of Time‐to‐Failure Data Using Rank Tests. Quality and Reliability Engineering International 28:3, pages 321-333.
Crossref
Crossref
Gracia Toubia‐Stucky, Haitao Liao & Janet Twomey. (2011) A Sequential Bayesian Cumulative Conformance Count Approach to Deterioration Detection in High Yield Processes. Quality and Reliability Engineering International 28:2, pages 203-214.
Crossref
Crossref
Y. H. Dovoedo & S. Chakraborti. (2011) Boxplot‐based phase I control charts for time between events. Quality and Reliability Engineering International 28:1, pages 123-130.
Crossref
Crossref
Christina M. Mastrangelo & Anna M. Gillan. 2012. Frontiers in Statistical Quality Control 10. Frontiers in Statistical Quality Control 10
159
170
.
John L. SzarkaIIIIII & William H. Woodall. (2011) A Review and perspective on surveillance of Bernoulli processes. Quality and Reliability Engineering International 27:6, pages 735-752.
Crossref
Crossref
Zhang Wu, ZhaoJun Wang & Wei Jiang. (2010) A generalized Conforming Run Length control chart for monitoring the mean of a variable. Computers & Industrial Engineering 59:2, pages 185-192.
Crossref
Crossref
Surath Aebtarm & Nizar Bouguila. (2010) An optimal bivariate Poisson field chart for controlling high-quality manufacturing processes. Expert Systems with Applications 37:7, pages 5498-5506.
Crossref
Crossref
Francisco DelgadilloJr.Jr. & Ronald Bremer. (2009) The development of a destructive sampling method designed for high quality production processes (DSM-HQ). Quality & Quantity 44:3, pages 595-605.
Crossref
Crossref
Henrik Spliid. (2009) An exponentially weighted moving average control chart for Bernoulli data. Quality and Reliability Engineering International 26:1, pages 97-113.
Crossref
Crossref
Y.J. Xie, K.L. Tsui, M. Xie & T.N. Goh. (2010) Monitoring time-between-events for health management. Monitoring time-between-events for health management.
Jung‐Tai Chen. (2009) A new approach to setting control limits of cumulative count of conforming charts for high‐yield processes. Quality and Reliability Engineering International 25:8, pages 973-986.
Crossref
Crossref
Rassoul Noorossana, Abbas Saghaei, Kamran Paynabar & Sara Abdi. (2009) Identifying the period of a step change in high‐yield processes. Quality and Reliability Engineering International 25:7, pages 875-883.
Crossref
Crossref
A. Syamsundar & V. N. A. Naikan. (2009) Sequential detection of change points for maintained systems using segmented point process models. Quality and Reliability Engineering International 25:6, pages 739-757.
Crossref
Crossref
James Benneyan. (2009) Misuse of XmR quality control charts for common single parameter probability distributions. Misuse of XmR quality control charts for common single parameter probability distributions.
Amitava Mitra. 2008. Fundamentals of Quality Control and Improvement. Fundamentals of Quality Control and Improvement
369
414
.
Rassoul Noorossana, Abbas Saghaei, Kamran Paynabar & Yaser Samimi. (2007) On the conditional decision procedure for high yield processes. Computers & Industrial Engineering 53:3, pages 469-477.
Crossref
Crossref
Seyed Taghi Akhavan Niaki & Babak Abbasi. (2006) On the monitoring of multi-attributes high-quality production processes. Metrika 66:3, pages 373-388.
Crossref
Crossref
Babak Abbasi & Seyed Taghi Akhavan Niaki. (2007) Monitoring high-yields processes with defects count in nonconforming items by artificial neural network. Applied Mathematics and Computation 188:1, pages 262-270.
Crossref
Crossref
Marilyn K. Hart, Robert F. Hart & Stephen Schmaltz. (2007) Control Limits for p Control Charts With Small Subgroup Sizes. Quality Management in Health Care 16:2, pages 123-129.
Crossref
Crossref
Henrik Spliid. (2006) Monitoring medical procedures by exponential smoothing. Statistics in Medicine 26:1, pages 124-138.
Crossref
Crossref
Baliman Honari & John Donovan. (2007) Early Detection Of Reliability Changes For A Non-Poisson Life Model Using Field Failure Data. Early Detection Of Reliability Changes For A Non-Poisson Life Model Using Field Failure Data.
Robert G. Batson, Yoonseok Jeong, Daniel J. Fonseca & Paul S. Ray. (2006) Control Charts for Monitoring Field Failure Data. Quality and Reliability Engineering International 22:7, pages 733-755.
Crossref
Crossref
Neil C. Schwertman. (2005) Designing Accurate Control Charts Based on the Geometric and Negative Binomial Distributions. Quality and Reliability Engineering International 21:8, pages 743-756.
Crossref
Crossref
A. Di Bucchianico, G. D. Mooiweer & E. J. G. Moonen. (2005) Monitoring Infrequent Failures of High‐volume Production Processes. Quality and Reliability Engineering International 21:5, pages 521-528.
Crossref
Crossref
C. W. Zhang, M. Xie & T. N. Goh. (2005) On Cumulative Conforming Type of Control Charts for High Quality Processes Under Sampling Inspection. Economic Quality Control 20:2.
Crossref
Crossref
L. Allison Jones & Charles W. Champ. (2002) Phase I control charts for times between events. Quality and Reliability Engineering International 18:6, pages 479-488.
Crossref
Crossref
M Xie, T N Goh & V KuralmaniM. Xie, T. N. Goh & V. Kuralmani. 2002. Statistical Models and Control Charts for High-Quality Processes. Statistical Models and Control Charts for High-Quality Processes
237
261
.
Zhang Wu, Xiaolan Zhang & Song Huat Yeo. (2001) Design of the sum-of-conforming-run-length control charts. European Journal of Operational Research 132:1, pages 187-196.
Crossref
Crossref
T.A. Spedding & K.K. Chan. (2001) System level improvement using discrete event simulation. International Journal of Quality & Reliability Management 18:1, pages 84-103.
Crossref
Crossref
M. XIE, T. N. GOH & V. KURALMANI. (2011) ON OPTIMAL SETTING OF CONTROL LIMITS FOR GEOMETRIC CHART. International Journal of Reliability, Quality and Safety Engineering 07:01, pages 17-25.
Crossref
Crossref
M. Xie, X.S. Lu, T.N. Goh & L.Y. Chan. (1999) A quality monitoring and decision‐making scheme for automated production processes. International Journal of Quality & Reliability Management 16:2, pages 148-157.
Crossref
Crossref
M. Xie, T.N. Goh & X.S. Lu. (1998) Computer-aided statistical monitoring of automated manufacturing processes. Computers & Industrial Engineering 35:1-2, pages 189-192.
Crossref
Crossref