Advanced search
Publication Cover
Aerosol Science and Technology Volume 52, 2018 - Issue 10: Articles in Honor of Peter McMurry
Submit an article Journal homepage
7,407
Views
26
CrossRef citations to date
0
Altmetric
Articles

Investigating particle emissions and aerosol dynamics from a consumer fused deposition modeling 3D printer with a lognormal moment aerosol model

Qian ZhangSchool of Civil and Environmental Engineering, Georgia Institute of Technology, Atlanta, Georgia, USAView further author information
,
Girish SharmaDepartment of Energy, Environmental and Chemical Engineering, Washington University in St. Louis, St. Louis, Missouri, USAView further author information
,
Jenny P. S. WongSchool of Earth and Atmospheric Sciences, Georgia Institute of Technology, Atlanta, Georia, USAView further author information
,
Aika Y. DavisChemical Safety, Underwriters Laboratories Inc., Marietta, Georgia, USAView further author information
,
Marilyn S. BlackChemical Safety, Underwriters Laboratories Inc., Marietta, Georgia, USAView further author information
,
Pratim BiswasDepartment of Energy, Environmental and Chemical Engineering, Washington University in St. Louis, St. Louis, Missouri, USAView further author information
&
Rodney J. WeberSchool of Earth and Atmospheric Sciences, Georgia Institute of Technology, Atlanta, Georia, USACorrespondence[email protected]
View further author information
 show all
Pages 1099-1111 | Received 19 Jan 2018, Accepted 04 Apr 2018, Published online: 30 Apr 2018

Citations (26)

Keep up to date with the latest research on this topic with citation updates for this article.

Subscribe to citation updates

Read on this site (5)

John Kechagias & Dimitrios Chaidas. (2023) Fused filament fabrication parameter adjustments for sustainable 3D printing. Materials and Manufacturing Processes 38:8, pages 933-940.
Read now
Sayed Kaes Maruf Hossain, Azul Toledo Vega, Delia Valles-Rosales, Young Ho Park, Sarada Kuravi & Hansuk Sohn. (2023) Particulate suspension: a review of studies characterizing particulates and volatile organic compounds emissions during additive manufacturing processes. Particulate Science and Technology 41:3, pages 350-360.
Read now
Robert I. MacCuspie, W. Cary Hill, Daniel R. Hall, Andrey Korchevskiy, Cassidy D. Strode, Alan J. Kennedy, Mark L. Ballentine, Taylor Rycroft & Matthew S. Hull. (2021) Prevention through design: insights from computational fluid dynamics modeling to predict exposure to ultrafine particles from 3D printing. Journal of Toxicology and Environmental Health, Part A 84:11, pages 458-474.
Read now
Rachel E. Zisook, Brooke D. Simmons, Mark Vater, Angela Perez, Ellen P. Donovan, Dennis J. Paustenbach & William D. Cyrs. (2020) Emissions associated with operations of four different additive manufacturing or 3D printing technologies. Journal of Occupational and Environmental Hygiene 17:10, pages 464-479.
Read now
Huang Zhang, Girish Sharma, Sukrant Dhawan, David Dhanraj, Zhichao Li & Pratim Biswas. (2020) Comparison of discrete, discrete-sectional, modal and moment models for aerosol dynamics simulations. Aerosol Science and Technology 54:7, pages 739-760.
Read now

Articles from other publishers (21)

Melissa Finnegan, Colleen Lee Thach, Shirin Khaki, Emma Markey, David J. O’Connor, Alan F. Smeaton & Aoife Morrin. (2023) Characterization of Volatile and Particulate Emissions from Desktop 3D Printers. Sensors 23:24, pages 9660.
Crossref
Qian Zhang & Marilyn S. Black. (2023) Exposure hazards of particles and volatile organic compounds emitted from material extrusion 3D printing: Consolidation of chamber study data. Environment International 182, pages 108316.
Crossref
Tim Clarke & Ali Hosseini. (2023) Effects of print parameters on tensile characteristics of additively manufactured polyethylene terephthalate-glycol (PETG). The International Journal of Advanced Manufacturing Technology 125:11-12, pages 4953-4974.
Crossref
Qian Zhang, Rodney J. Weber, Todd P. Luxton, Derek M. Peloquin, Eric J. Baumann & Marilyn S. Black. (2023) Metal compositions of particle emissions from material extrusion 3D printing: Emission sources and indoor exposure modeling. Science of The Total Environment 860, pages 160512.
Crossref
Heike Romanowski, Frank S. Bierkandt, Andreas Luch & Peter Laux. (2023) Summary and derived Risk Assessment of 3D printing emission studies. Atmospheric Environment 294, pages 119501.
Crossref
Hector Garcia Gonzalez & Mª Teresa Lopez Pola. 2023. Advances in 3D Printing [Working Title]. Advances in 3D Printing [Working Title].
Jie Zhang, Da-Ren Chen & Sheng-Chieh Chen. (2022) A review of emission characteristics and control strategies for particles emitted from 3D fused deposition modeling (FDM) printing. Building and Environment 221, pages 109348.
Crossref
Nikolay P. Simonenko, Nikita A. Fisenko, Fedor S. Fedorov, Tatiana L. Simonenko, Artem S. Mokrushin, Elizaveta P. Simonenko, Ghenadii Korotcenkov, Victor V. Sysoev, Vladimir G. Sevastyanov & Nikolay T. Kuznetsov. (2022) Printing Technologies as an Emerging Approach in Gas Sensors: Survey of Literature. Sensors 22:9, pages 3473.
Crossref
Getachew Tedla, Annie M. Jarabek, Peter Byrley, William Boyes & Kim Rogers. (2022) Human exposure to metals in consumer-focused fused filament fabrication (FFF)/ 3D printing processes. Science of The Total Environment 814, pages 152622.
Crossref
Elżbieta Dobrzyńska, Dorota Kondej, Joanna Kowalska & Małgorzata Szewczyńska. (2021) State of the art in additive manufacturing and its possible chemical and particle hazards—review. Indoor Air 31:6, pages 1733-1758.
Crossref
Ke Min, Yong Li, Dingyi Wang, Bo Chen, Ming Ma, Ligang Hu, Qian Liu & Guibin Jiang. (2021) 3D Printing-Induced Fine Particle and Volatile Organic Compound Emission: An Emerging Health Risk. Environmental Science & Technology Letters 8:8, pages 616-625.
Crossref
Peter Byrley, William K. Boyes, Kim Rogers & Annie M. Jarabek. (2021) 3D printer particle emissions: Translation to internal dose in adults and children. Journal of Aerosol Science 154, pages 105765.
Crossref
Aluri Manoj, Monami Bhuyan, Swarup Raj Banik & Mamilla Ravi Sankar. (2021) Review on particle emissions during fused deposition modeling of acrylonitrile butadiene styrene and polylactic acid polymers. Materials Today: Proceedings 44, pages 1375-1383.
Crossref
Erik Alberts, Mark Ballentine, Eftihia Barnes & Alan Kennedy. (2021) Impact of metal additives on particle emission profiles from a fused filament fabrication 3D printer. Atmospheric Environment 244, pages 117956.
Crossref
Hong-ye Ma, Ming-zhou Yu & Han-hui Jin. (2020) A study of the evolution of nanoparticle dynamics in a homogeneous isotropic turbulence flow via a DNS-TEMOM method. Journal of Hydrodynamics 32:6, pages 1091-1099.
Crossref
Shirun Ding, Man Pun Wan & Bing Feng Ng. (2020) Dynamic Analysis of Particle Emissions from FDM 3D Printers through a Comparative Study of Chamber and Flow Tunnel Measurements. Environmental Science & Technology 54:22, pages 14568-14577.
Crossref
Belen Maria Moreno-Cabezali & Jose Maria Fernandez-Crehuet. (2020) Application of a fuzzy-logic based model for risk assessment in additive manufacturing R&D projects. Computers & Industrial Engineering 145, pages 106529.
Crossref
Kevin L. Dunn, Kevin H. Dunn, Duane Hammond & Samuel Lo. (2020) Three-dimensional printer emissions and employee exposures to ultrafine particles during the printing of thermoplastic filaments containing carbon nanotubes or carbon nanofibers. Journal of Nanoparticle Research 22:2.
Crossref
Shirun Ding, Bing Feng Ng, Xiaopeng Shang, Hu Liu, Xuehong Lu & Man Pun Wan. (2019) The characteristics and formation mechanisms of emissions from thermal decomposition of 3D printer polymer filaments. Science of The Total Environment 692, pages 984-994.
Crossref
Qian Zhang, Michal Pardo, Yinon Rudich, Ifat Kaplan-Ashiri, Jenny P. S. Wong, Aika Y. Davis, Marilyn S. Black & Rodney J. Weber. (2019) Chemical Composition and Toxicity of Particles Emitted from a Consumer-Level 3D Printer Using Various Materials. Environmental Science & Technology 53:20, pages 12054-12061.
Crossref
Ahmad Yusairi Bani Hashim, Silah Hayati Kamsani, Mahasan Mat Ali, Syamimi Shamsuddin & Ahmad Zaki Shukor. (2019) Simulation and Reproduction of a Manipulator According to Classical Arm Representation and Trajectory Planning. Advances in Science, Technology and Engineering Systems Journal 4:6, pages 158-162.
Crossref

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.