Citations (290)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (30)
Arabella M. McLaughlin, John Robertson & Xiong-Wei Ni. (2020) Investigation of dissolution rate kinetics of bulk pharmaceutical feed streams within a stirred tank vessel and a twin screw extruder. Pharmaceutical Development and Technology 25:2, pages 219-226.
Read now
Read now
A. L. Kelly, T. Gough, M. Isreb, R. Dhumal, J. W. Jones, S. Nicholson, A. B. Dennis & A. Paradkar. (2018) In-process rheometry as a PAT tool for hot melt extrusion. Drug Development and Industrial Pharmacy 44:4, pages 670-676.
Read now
Read now
Bader B. Alsulays, Vijay Kulkarni, Sultan M. Alshehri, Bjad K. Almutairy, Eman A. Ashour, Joseph T. Morott, Abdullah S. Alshetaili, Jun-Bom Park, Roshan V. Tiwari & Michael A. Repka. (2017) Preparation and evaluation of enteric coated tablets of hot-melt extruded lansoprazole. Drug Development and Industrial Pharmacy 43:5, pages 789-796.
Read now
Read now
Abdullah S. Alshetaili, Bjad K. Almutairy, Saad M. Alshahrani, Eman A. Ashour, Roshan V. Tiwari, Sultan M. Alshehri, Xin Feng, Bader B. Alsulays, Soumyajit Majumdar, Nigel Langley, Karl Kolter, Andreas Gryczke, Scott T. Martin & Michael A. Repka. (2016) Optimization of hot melt extrusion parameters for sphericity and hardness of polymeric face-cut pellets. Drug Development and Industrial Pharmacy 42:11, pages 1833-1841.
Read now
Read now
Michał Teżyk, Bartłomiej Milanowski, Andrzej Ernst & Janina Lulek. (2016) Recent progress in continuous and semi-continuous processing of solid oral dosage forms: a review. Drug Development and Industrial Pharmacy 42:8, pages 1195-1214.
Read now
Read now
Raju Onkar Sonawane & Savita Dattatraya Patil. (2016) Formulation Aspects and Effect of Critical Factors for Designing Extended Release Pellets: An Updated Review. Polymer-Plastics Technology and Engineering 55:9, pages 976-989.
Read now
Read now
Bart Claeys, Reinout Vandeputte, Bruno G. De Geest, Jean Paul Remon & Chris Vervaet. (2016) pH-independent immediate release polymethacrylate formulations – an observational study. Drug Development and Industrial Pharmacy 42:4, pages 578-583.
Read now
Read now
Chinna Reddy Palem, Narendar Reddy Dudhipala, Sunil Kumar Battu, Michael A. Repka & Madhusudan Rao Yamsani. (2016) Development, optimization and in vivo characterization of domperidone-controlled release hot-melt-extruded films for buccal delivery. Drug Development and Industrial Pharmacy 42:3, pages 473-484.
Read now
Read now
Eman A. Ashour, Vijay Kulkarni, Bjad Almutairy, Jun-Bom Park, Sejal P. Shah, Soumyajit Majumdar, Zhuoyang Lian, Elanor Pinto, Vivian Bi, Thomas Durig, Scott T. Martin & Michael A. Repka. (2016) Influence of pressurized carbon dioxide on ketoprofen-incorporated hot-melt extruded low molecular weight hydroxypropylcellulose. Drug Development and Industrial Pharmacy 42:1, pages 123-130.
Read now
Read now
Payal Sharma, Sameer R. Modi & Arvind K. Bansal. (2015) Co-processing as a tool to improve aqueous dispersibility of cellulose ethers. Drug Development and Industrial Pharmacy 41:11, pages 1745-1758.
Read now
Read now
Xin Feng, Xingyou Ye, Jun-Bom Park, Wenli Lu, Joe Morott, Brad Beissner, Zhuoyang John Lian, Elanor Pinto, Vivian Bi, Stu Porter, Tom Durig, Soumyajit Majumdar & Michael A. Repka. (2015) Evaluation of the recrystallization kinetics of hot-melt extruded polymeric solid dispersions using an improved Avrami equation. Drug Development and Industrial Pharmacy 41:9, pages 1479-1487.
Read now
Read now
Justin R. Hughey, Justin M. Keen, Ryan C. Bennett, Sakae Obara & James W. McGinity. (2015) The incorporation of low-substituted hydroxypropyl cellulose into solid dispersion systems. Drug Development and Industrial Pharmacy 41:8, pages 1294-1301.
Read now
Read now
Elena Ravina-Eirin, J. L. Gomez-Amoza & Ramón Martínez-Pacheco. (2015) Drug dispersion degree and drug dissolution rate in Hybrane S1200-based instant-release matricial particles prepared by hot melt extrusion. Drug Development and Industrial Pharmacy 41:6, pages 1000-1005.
Read now
Read now
Ryan C. Bennett, Chris Brough, Dave A. Miller, Kevin P. O’Donnell, Justin M. Keen, Justin R. Hughey, Robert O. Williams$suffix/text()$suffix/text() & James W. McGinity. (2015) Preparation of amorphous solid dispersions by rotary evaporation and KinetiSol Dispersing: approaches to enhance solubility of a poorly water-soluble gum extract. Drug Development and Industrial Pharmacy 41:3, pages 382-397.
Read now
Read now
Muhammad Hanif, Muhammad Zaman & Vesh Chaurasiya. (2015) Polymers used in buccal film: a review. Designed Monomers and Polymers 18:2, pages 105-111.
Read now
Read now
Nathan Boersen, Thomas Wai-Yip Lee, Xiaole (George) Shen & Ho-Wah Hui. (2014) A preliminary assessment of the impact of hot-melt extrusion on the physico-mechanical properties of a tablet. Drug Development and Industrial Pharmacy 40:10, pages 1386-1394.
Read now
Read now
K. Vithani, Y. Cuppok, S. Mostafa, I. J. Slipper, M. J. Snowden & D. Douroumis. (2014) Diclofenac sodium sustained release hot melt extruded lipid matrices. Pharmaceutical Development and Technology 19:5, pages 531-538.
Read now
Read now
Elena Raviña-Eirín, Jose Luis Gómez-Amoza & Ramón Martínez-Pacheco. (2013) Utility of the hyperbranched polymer Hybrane S1200 for production of instant-release particles by hot melt extrusion. Drug Development and Industrial Pharmacy 39:7, pages 1107-1112.
Read now
Read now
Gena Dalziel, Ewa Nauka, Feng Zhang, Sanjeev Kothari & Minli Xie. (2013) Assessment of granulation technologies for an API with poor physical properties. Drug Development and Industrial Pharmacy 39:7, pages 985-995.
Read now
Read now
Chinna Reddy Palem, Sunil Kumar Battu, Sindhuri Maddineni, Ramesh Gannu, Michael A. Repka & Madhusudan Rao Yamsani. (2013) Oral transmucosal delivery of domperidone from immediate release films produced via hot-melt extrusion technology. Pharmaceutical Development and Technology 18:1, pages 186-195.
Read now
Read now
Weibin Deng, Soumyajit Majumdar, Abhilasha Singh, Sejal Shah, Noorullah Naqvi Mohammed, Seongbong Jo, Elanor Pinto, Divya Tewari, Thomas Durig & Michael A. Repka. (2013) Stabilization of fenofibrate in low molecular weight hydroxypropylcellulose matrices produced by hot-melt extrusion. Drug Development and Industrial Pharmacy 39:2, pages 290-298.
Read now
Read now
M. Maniruzzaman, M. M. Rana, J. S. Boateng, J. C. Mitchell & D. Douroumis. (2013) Dissolution enhancement of poorly water-soluble APIs processed by hot-melt extrusion using hydrophilic polymers. Drug Development and Industrial Pharmacy 39:2, pages 218-227.
Read now
Read now
Indrajit Ghosh, Radha Vippagunta, Shoufeng Li & Sudha Vippagunta. (2012) Key considerations for optimization of formulation and melt-extrusion process parameters for developing thermosensitive compound. Pharmaceutical Development and Technology 17:4, pages 502-510.
Read now
Read now
Rashmi R. Panda & Ashok K. Tiwary. (2012) Hot melt granulation: a facile approach for monolithic osmotic release tablets. Drug Development and Industrial Pharmacy 38:4, pages 447-461.
Read now
Read now
Michael A Repka, Sejal Shah, Jiannan Lu, Sindhuri Maddineni, Joe Morott, Ketaki Patwardhan & Noorullah Naqvi Mohammed. (2012) Melt extrusion: process to product. Expert Opinion on Drug Delivery 9:1, pages 105-125.
Read now
Read now
Jingwen Hou, Changyan Li, Liang Cheng, Shengrong Guo, Yaqiong Zhang & Tingting Tang. (2011) Study on hydrophilic 5-fluorouracil release from hydrophobic poly(ϵ-caprolactone) cylindrical implants. Drug Development and Industrial Pharmacy 37:9, pages 1068-1075.
Read now
Read now
Parijat Kanaujia, Grace Lau, Wai Kiong Ng, Effendi Widjaja, Martin Schreyer, Andrea Hanefeld, Matthias Fischbach, Christoph Saal, Mario Maio & Reginald B.H. Tan. (2011) Investigating the effect of moisture protection on solid-state stability and dissolution of fenofibrate and ketoconazole solid dispersions using PXRD, HSDSC and Raman microscopy. Drug Development and Industrial Pharmacy 37:9, pages 1026-1035.
Read now
Read now
Fu Jijun, Xu Lishuang, Wang Xiaoli, Zhang Shu, Tao Xiaoguang, Zhao Xingna, He Haibing & Tang Xing. (2011) Nimodipine (NM) tablets with high dissolution containing NM solid dispersions prepared by hot-melt extrusion. Drug Development and Industrial Pharmacy 37:8, pages 934-944.
Read now
Read now
Dennis Douroumis. (2011) Orally disintegrating dosage forms and taste-masking technologies; 2010. Expert Opinion on Drug Delivery 8:5, pages 665-675.
Read now
Read now
Michael A Repka, Soumyajit Majumdar, Sunil Kumar Battu, Ramesh Srirangam & Sampada B Upadhye. (2008) Applications of hot-melt extrusion for drug delivery. Expert Opinion on Drug Delivery 5:12, pages 1357-1376.
Read now
Read now
Articles from other publishers (260)
Yanshuai Wang, Jie Ren, Jiandong Zuo, Hangyu Du, Chengtian Zhu, Y.X. Zhang, Yifan Ren & Yunyu Chen. (2023) Corrosion protection of steel bar enabled by monofluorophosphate-bearing composites with sustained-release capability. Journal of Building Engineering 80, pages 108087.
Crossref
Crossref
Lisa Kuchler, Martin Spoerk, Simone Eder, Aygün Doğan, Johannes Khinast & Stephan Sacher. (2023) Liquid API Feeding in Pharmaceutical HME: Novel Options in Solid Dosage Manufacturing. International Journal of Pharmaceutics, pages 123690.
Crossref
Crossref
Jinghan Li, Yihan Wang & Dongyue Yu. (2023) Effects of Additives on the Physical Stability and Dissolution of Polymeric Amorphous Solid Dispersions: a Review. AAPS PharmSciTech 24:7.
Crossref
Crossref
Yuntian Xiao, Chuanhua Wu, Pingping Cui, Ling Zhou & Qiuxiang Yin. (2023) Pursuing Green and Efficient Agriculture from Molecular Assembly: A Review of Solid-State Forms on Agrochemicals. Journal of Agricultural and Food Chemistry 71:28, pages 10500-10524.
Crossref
Crossref
Eszter Nagy, Judit Kopniczky, Tamás Smausz, Máté Náfrádi, Tünde Alapi, János Bohus, Viktor Pajer, Piroska Szabó-Révész, Rita Ambrus & Béla Hopp. (2023) A comparative study of femtosecond pulsed laser ablation of meloxicam in distilled water and in air. Scientific Reports 13:1.
Crossref
Crossref
Vaibhav G. Bhamare & Ravindra K. Kamble. (2023) Hot Melt Extrusion: A Paradigm–Changing Technology. Recent Advances in Drug Delivery and Formulation 17:2, pages 120-131.
Crossref
Crossref
Isaïe Nyamba, Olivier Jennotte, Charles B. Sombié, Anna Lechanteur, Pierre-Yves Sacre, Abdoulaye Djandé, Rasmané Semdé & Brigitte Evrard. (2023) Preformulation study for the selection of a suitable polymer for the development of ellagic acid-based solid dispersion using hot-melt extrusion. International Journal of Pharmaceutics 641, pages 123088.
Crossref
Crossref
Judith Winck, Tobias Gottschalk & Markus Thommes. (2023) Predicting Residence Time and Melt Temperature in Pharmaceutical Hot Melt Extrusion. Pharmaceutics 15:5, pages 1417.
Crossref
Crossref
Ashay Shukla, Nagi Reddy Dumpa, Rishi Thakkar, Abhishek Shettar, Eman Ashour, Suresh Bandari & Michael A. Repka. (2023) Influence of Poloxamer on the Dissolution and Stability of Hot-Melt Extrusion–Based Amorphous Solid Dispersions Using Design of Experiments. AAPS PharmSciTech 24:5.
Crossref
Crossref
Krishna M. Gupta, Xavier Chin & Parijat Kanaujia. (2023) Molecular Interactions between APIs and Enteric Polymeric Excipients in Solid Dispersion: Insights from Molecular Simulations and Experiments. Pharmaceutics 15:4, pages 1164.
Crossref
Crossref
Apoorva Phadke & Purnima Amin. (2022) Orally Disintegrating Film of High-Dose BCS II Drug by Hot Melt Extrusion through Design of Experiment. Journal of Pharmaceutical Innovation 18:1, pages 247-261.
Crossref
Crossref
Daniel Kramarczyk, Justyna Knapik-Kowalczuk, Mateusz Kurek, Witold Jamróz, Renata Jachowicz & Marian Paluch. (2023) Hot Melt Extruded Posaconazole-Based Amorphous Solid Dispersions—The Effect of Different Types of Polymers. Pharmaceutics 15:3, pages 799.
Crossref
Crossref
Abdulmajeed A. Althobaiti, Eman A. Ashour, Ahmed Almotairy, Mashan Almutairi, Mohammed AlYahya & Michael A. Repka. (2023) Development and characterization of different dosage forms of nifedipine/indomethacin fixed-dose combinations. Journal of Drug Delivery Science and Technology 80, pages 104117.
Crossref
Crossref
Rishi Thakkar, Amit Raviraj Pillai, Vineet R. Kulkarni & Mohammed Maniruzzaman. 2023. A Handbook of Artificial Intelligence in Drug Delivery. A Handbook of Artificial Intelligence in Drug Delivery
259
299
.
Marta Kozakiewicz-Latała, Anna Junak, Adrianna Złocińska, Wojciech Pudło, Krystian Prusik, Patrycja Szymczyk-Ziółkowska, Bożena Karolewicz & Karol P. Nartowski. (2022) Adjusting the melting point of an Active Pharmaceutical Ingredient (API) via cocrystal formation enables processing of high melting drugs via combined hot melt and materials extrusion (HME and ME). Additive Manufacturing 60, pages 103196.
Crossref
Crossref
Midhu George Veeran, Resmy Rachel Thomas, Reshmi Ramakrishnan, Bharaniraja B & Abi Santhosh Aprem. (2022) Quality-by-Design Approach for Optimization and Processing of PLGA Polymer Film by Hot Melt Extrusion. Journal of Pharmaceutical Innovation 17:4, pages 1282-1294.
Crossref
Crossref
Vishva Chauhan, Rajnikant Mardia, Mehul Patel, Bhanu Suhagia & Komal Parmar. (2022) Technical and Formulation Aspects of Pharmaceutical Co‐Crystallization: A Systematic Review. ChemistrySelect 7:37.
Crossref
Crossref
Abdulmajeed A. Althobaiti, Eman A. Ashour, Mashan Almutairi, Ahmed Almotairy, Mohammed Al Yahya & Michael A. Repka. (2022) Formulation development of curcumin-piperine solid dispersion via hot-melt extrusion. Journal of Drug Delivery Science and Technology 76, pages 103753.
Crossref
Crossref
GANESH J. SARAF, KISHOR KUMAR B. BURADE, INDRAJEET. D GONJARI, AVINASH H. HOSMANI & ARTI A. PAWAR. (2022) A REVIEW ON ADVANCES IN PHARMACEUTICAL CO-CRYSTAL PREPARATION ROUTES, INTELLECTUAL PROPERTY PERSPECTIVE AND REGULATORY ASPECTS. International Journal of Current Pharmaceutical Research, pages 4-12.
Crossref
Crossref
Antoine Al‐Achi, Mali Ram Gupta & William Craig Stagner. 2022. Integrated Pharmaceutics. Integrated Pharmaceutics
298
335
.
Saurabh M Mishra, Margarethe Richter, Luis Mejia & Andreas Sauer. (2022) Downstream Processing of Itraconazole:HPMCAS Amorphous Solid Dispersion: From Hot-Melt Extrudate to Tablet Using a Quality by Design Approach. Pharmaceutics 14:7, pages 1429.
Crossref
Crossref
Prabhakar S. Panzade, Giridhar R. Shendarkar & Deepak A. Kulkarni. (2020) Hot Melt Extrusion: an Emerging Green Technique for the Synthesis of High-Quality Pharmaceutical Cocrystals. Journal of Pharmaceutical Innovation 17:2, pages 283-293.
Crossref
Crossref
Ji Hoon Kim, Kyeongjin Kim & Hyo-Eon Jin. (2022) Three-Dimensional Printing for Oral Pharmaceutical Dosage Forms. Journal of Pharmaceutical Investigation 52:3, pages 293-317.
Crossref
Crossref
Gaia Colombo, Stavros Politis & Alessandra Rossi. 2022. Oral Drug Delivery for Modified Release Formulations. Oral Drug Delivery for Modified Release Formulations
119
136
.
Maram Gupta, Devegowda Gowda, Tegginamath Kumar & Jessica Rosenholm. (2022) A Comprehensive Review of Patented Technologies to Fabricate Orodispersible Films: Proof of Patent Analysis (2000–2020). Pharmaceutics 14:4, pages 820.
Crossref
Crossref
Divya D. Jain, Srushti M. Tambe & Purnima D. Amin. (2022) Formulation performance window for manufacturing cellulose-based sustained-release mini-matrices of highly water-soluble drug via hot-melt extrusion technology. Cellulose 29:6, pages 3323-3350.
Crossref
Crossref
Khoshick Ganesh, Shihhsien Yang, Sofia Schillace, Valeria Vita, Yaoke Wang, Kornel F. Ehmann & Ping Guo. (2022) A review of manufacturing techniques for subcutaneous drug delivery implants. Procedia CIRP 110, pages 329-334.
Crossref
Crossref
Stephen A. Thompson, Daniel A. DavisJr.Jr., James C. DiNunzio, Charlie Martin, Robert O. WilliamsIIIIII & Feng Zhang. 2022. Formulating Poorly Water Soluble Drugs. Formulating Poorly Water Soluble Drugs
327
376
.
Tarek A. Ahmed & Khalid M. El-Say. 2022. The ADME Encyclopedia. The ADME Encyclopedia
1114
1119
.
Ju-Hyun Lee, Chulhun Park, Kwon-Yeon Weon, Chin-Yang Kang, Beom-Jin Lee & Jun-Bom Park. (2021) Improved Bioavailability of Poorly Water-Soluble Drug by Targeting Increased Absorption through Solubility Enhancement and Precipitation Inhibition. Pharmaceuticals 14:12, pages 1255.
Crossref
Crossref
Josip Matić, Carolina Alva, Simone Eder, Kathrin Reusch, Amrit Paudel & Johannes Khinast. (2021) Towards predicting the product quality in hot-melt extrusion: Pilot plant scale extrusion. International Journal of Pharmaceutics: X 3, pages 100084.
Crossref
Crossref
Gauri Shadambikar, Sushrut Marathe, Nan Ji, Mashan Almutairi, Suresh Bandari, Feng Zhang, Mahavir Chougule & Michael Repka. (2021) Formulation development of itraconazole PEGylated nano-lipid carriers for pulmonary aspergillosis using hot-melt extrusion technology. International Journal of Pharmaceutics: X 3, pages 100074.
Crossref
Crossref
Jonathan Grimard, Laurent Dewasme & Alain Vande Wouwer. (2021) Dynamic Model Reduction and Predictive Control of Hot-Melt Extrusion Applied to Drug Manufacturing. IEEE Transactions on Control Systems Technology 29:6, pages 2366-2378.
Crossref
Crossref
Guangming Yan, Zhi Cao, Declan Devine, Manfred Penning & Noel M. Gately. (2021) Physical Properties of Shellac Material Used for Hot Melt Extrusion with Potential Application in the Pharmaceutical Industry. Polymers 13:21, pages 3723.
Crossref
Crossref
Ahmed Almotairy, Mashan Almutairi, Abdulmajeed Althobaiti, Mohammed Alyahya, Sandeep Sarabu, Abdullah Alzahrani, Feng Zhang, Suresh Bandari & Michael A. Repka. (2021) Effect of pH modifiers on the solubility, dissolution rate, and stability of telmisartan solid dispersions produced by hot-melt extrusion technology. Journal of Drug Delivery Science and Technology 65, pages 102674.
Crossref
Crossref
Derick Muhindo, Eman A. Ashour, Mashan Almutairi, Poorva H. Joshi & Michael A. Repka. (2021) Continuous production of raloxifene hydrochloride loaded nanostructured lipid carriers using hot-melt extrusion technology. Journal of Drug Delivery Science and Technology 65, pages 102673.
Crossref
Crossref
Zhiyu Liu, Hangling Song, Xia Chen, Aichun Han, Rong Chen, Guiting Liu & Shaoyun Guo. (2021) Heat Treatment Induced Specified Aggregation Morphology of Metoprolol Tartrate in Poly(ε-caprolactone) Matrix and the Drug Release Variation. Polymers 13:18, pages 3076.
Crossref
Crossref
Hellen Regina Oliveira de Almeida, Beatriz Ferreira de Carvalho Patricio, Yasmin do Anjos Garcia, Talita Goulart da Silva, Debora Baptista Pereira, Michelle Alvares Sarcinelli, Helvécio Vinícius Antunes Rocha & Roberta Helena Mendonça. (2021)
Production of biodegradable rods of
polycaprolactone
/olanzapine for potential application in treatment of Schizophrenia
. Journal of Applied Polymer Science 138:37.
Crossref
Crossref
Krzysztof Chmiel, Justyna Knapik-Kowalczuk, Ewa Kamińska, Lidia Tajber & Marian Paluch. (2021) High-Pressure Dielectric Studies—a Way to Experimentally Determine the Solubility of a Drug in the Polymer Matrix at Low Temperatures. Molecular Pharmaceutics 18:8, pages 3050-3062.
Crossref
Crossref
Sonal V. Bhujbal, Biplob Mitra, Uday Jain, Yuchuan Gong, Anjali Agrawal, Shyam Karki, Lynne S. Taylor, Sumit Kumar & Qi (Tony) Zhou. (2021) Pharmaceutical amorphous solid dispersion: A review of manufacturing strategies. Acta Pharmaceutica Sinica B 11:8, pages 2505-2536.
Crossref
Crossref
Jack Bufton, Sungmin Jung, James C. Evans, Zeqing Bao, Dean Aguiar & Christine Allen. (2021) Cross-linked valerolactone copolymer implants with tailorable biodegradation, loading and in vitro release of paclitaxel. European Journal of Pharmaceutical Sciences 162, pages 105808.
Crossref
Crossref
Phuong H.L. Tran, Beom-Jin Lee & Thao T.D. Tran. (2021) Recent studies on the processes and formulation impacts in the development of solid dispersions by hot-melt extrusion. European Journal of Pharmaceutics and Biopharmaceutics 164, pages 13-19.
Crossref
Crossref
Dilipkumar Suryawanshi, Pradipkumar Wavhule, Umesh Shinde, Mamta Kamble & Purnima Amin. (2021) Development, optimization and in-vivo evaluation of cyanocobalamin loaded orodispersible films using hot-melt extrusion technology: A quality by design (QbD) approach. Journal of Drug Delivery Science and Technology 63, pages 102559.
Crossref
Crossref
Sanjeevani Deshkar, Mrunali Rathi, Shital Zambad & Krishnakant Gandhi. (2021) Hot Melt Extrusion and its Application in 3D Printing of Pharmaceuticals. Current Drug Delivery 18:4, pages 387-407.
Crossref
Crossref
Shahab Kashani Rahimi, Kevin O’Donnell, Brian Haight, Augie Machado, Charlie Martin, Fan Meng, Tony Listro & Feng Zhang. (2021) Supercritical-CO2 Foam Extrusion of Hydroxypropyl Methyl Cellulose Acetate Succinate/Itraconazole Amorphous Solid Dispersions: Processing-Structure-Property Relations. Journal of Pharmaceutical Sciences 110:4, pages 1444-1456.
Crossref
Crossref
Daniel A. DavisJr.Jr., Rishi Thakkar, Yongchao Su, Robert O. WilliamsIIIIII & Mohammed Maniruzzaman. (2021) Selective Laser Sintering 3-Dimensional Printing as a Single Step Process to Prepare Amorphous Solid Dispersion Dosage Forms for Improved Solubility and Dissolution Rate. Journal of Pharmaceutical Sciences 110:4, pages 1432-1443.
Crossref
Crossref
Surojit Banerjee, Ujjwal Joshi, Anupama Singh & Vikas Anand Saharan. (2021) Lipids for Taste masking and Taste assessment in pharmaceutical formulations. Chemistry and Physics of Lipids 235, pages 105031.
Crossref
Crossref
Gauri Shadambikar, Sushrut Marathe, Akash Patil, Rohit Joshi, Suresh Bandari, Soumyajit Majumdar & Michael Repka. (2021) Novel Application of Hot Melt Extrusion Technology for Preparation and Evaluation of Valacyclovir Hydrochloride Ocular Inserts. AAPS PharmSciTech 22:1.
Crossref
Crossref
Justyna Knapik-Kowalczuk, Marzena Rams-Baron & Marian Paluch. (2021) Current research trends in dielectric relaxation studies of amorphous pharmaceuticals: Physical stability, tautomerism, and the role of hydrogen bonding. TrAC Trends in Analytical Chemistry 134, pages 116097.
Crossref
Crossref
Mateusz Gosecki, Harri Setälä, Tommi Virtanen & Anthony J. Ryan. (2021) A facile method to control the phase behavior of hydroxypropyl cellulose. Carbohydrate Polymers 251, pages 117015.
Crossref
Crossref
Josip Matić, Carolina Alva, Andreas Witschnigg, Simone Eder, Kathrin Reusch, Amrit Paudel & Johannes Khinast. (2020) Towards predicting the product quality in hot-melt extrusion: Small scale extrusion. International Journal of Pharmaceutics: X 2, pages 100062.
Crossref
Crossref
Stephan Sacher, Nikolaus Heindl, Jesús Alberto Afonso Urich, Julia Kruisz & Johannes G. Khinast. (2020) A solution for low-dose feeding in continuous pharmaceutical processes. International Journal of Pharmaceutics 591, pages 119969.
Crossref
Crossref
Abdullah Alshetaili, Saad M. Alshahrani, Bjad K. Almutairy & Michael A. Repka. (2020) Hot Melt Extrusion Processing Parameters Optimization. Processes 8:11, pages 1516.
Crossref
Crossref
Deck Khong Tan, Daniel A. DavisJrJr, Dave A. Miller, Robert O. WilliamsIIIIII & Ali Nokhodchi. (2020) Innovations in Thermal Processing: Hot-Melt Extrusion and KinetiSol® Dispersing. AAPS PharmSciTech 21:8.
Crossref
Crossref
Jinglin Yin, Chengbin Huang, Hanxi Guan, Zhenfeng Pang, Yongchao Su & Xueqian Kong. (2020) In situ solid‐state NMR characterization of pharmaceutical materials: An example of drug‐polymer thermal mixing. Magnetic Resonance in Chemistry 58:11, pages 1049-1054.
Crossref
Crossref
Uttom Nandi, Md. S.H. Mithu, Andrew P. Hurt, Vivek Trivedi & Dennis Douroumis. (2020) Drug–Smectite Clay Amorphous Solid Dispersions Processed by Hot Melt Extrusion. AAPS PharmSciTech 21:7.
Crossref
Crossref
Nada Kittikunakorn, Tongzhou Liu & Feng Zhang. (2020) Twin-screw melt granulation: Current progress and challenges. International Journal of Pharmaceutics 588, pages 119670.
Crossref
Crossref
Rishi Thakkar, Amit Raviraj Pillai, Jiaxiang Zhang, Yu Zhang, Vineet Kulkarni & Mohammed Maniruzzaman. (2020) Novel On-Demand 3-Dimensional (3-D) Printed Tablets Using Fill Density as an Effective Release-Controlling Tool. Polymers 12:9, pages 1872.
Crossref
Crossref
Yuya Nishimoto, Yusuke Hattori & Makoto Otsuka. (2020) Characterization of ternary amorphous solid dispersion containing hypromellose phthalate and erythritol prepared by hot melt extrusion using melting point depression. Journal of Drug Delivery Science and Technology 58, pages 101797.
Crossref
Crossref
Rishi Thakkar, Eman A. Ashour, Ashay Shukla, Rui Wang, Walter G. Chambliss, Suresh Bandari, Narasimha Murthy & Michael A. Repka. (2020) A Comparison Between Lab-Scale and Hot-Melt-Extruder-Based Anti-inflammatory Ointment Manufacturing. AAPS PharmSciTech 21:5.
Crossref
Crossref
Josip Matić, Amrit Paudel, Hannes Bauer, Raymar Andreina Lara Garcia, Kinga Biedrzycka & Johannes G. Khinast. (2020) Developing HME-Based Drug Products Using Emerging Science: a Fast-Track Roadmap from Concept to Clinical Batch. AAPS PharmSciTech 21:5.
Crossref
Crossref
Fengyuan Yang, Yongchao Su, James Small, Chengbin Huang, Gary E. Martin, Andrew M. Farrington, James DiNunzio & Chad D. Brown. (2020) Probing the Molecular-Level Interactions in an Active Pharmaceutical Ingredient (API) - Polymer Dispersion and the Resulting Impact on Drug Product Formulation. Pharmaceutical Research 37:6.
Crossref
Crossref
Justyna Knapik-Kowalczuk, Krzysztof Chmiel, Justyna Pacułt, Klaudia Bialek, Lidia Tajber & Marian Paluch. (2020) Enhancement of the Physical Stability of Amorphous Sildenafil in a Binary Mixture, with either a Plasticizing or Antiplasticizing Compound. Pharmaceutics 12:5, pages 460.
Crossref
Crossref
Yusuke Hattori, Shiho Kubota & Makoto Otsuka. (2020) Pharmaceutical evaluation of matrix tablets prepared using a fused deposition modelling type three-dimensional printer – Effect of geometrical internal microstructural factors on drug release from enteric-polymer tablets containing rebamipide. Journal of Pharmacy and Pharmacology 72:6, pages 787-797.
Crossref
Crossref
Jan Ornik, Daniel Knoth, Martin Koch & Cornelia M. Keck. (2020) Terahertz-spectroscopy for non-destructive determination of crystallinity of L-tartaric acid in smartFilms® and tablets made from paper. International Journal of Pharmaceutics 581, pages 119253.
Crossref
Crossref
A. Schittny, S. Philipp-Bauer, P. Detampel, J. Huwyler & M. Puchkov. (2020) Mechanistic insights into effect of surfactants on oral bioavailability of amorphous solid dispersions. Journal of Controlled Release 320, pages 214-225.
Crossref
Crossref
Arun Radhakrishnan, Gowthamarajan Kuppusamy, Sivasankaran Ponnusankar & Nikhitha K. Shanmukhan. (2019) Pharmacogenomic phase transition from personalized medicine to patient-centric customized delivery. The Pharmacogenomics Journal 20:1, pages 1-18.
Crossref
Crossref
Nicole Mendonsa, Bjad Almutairy, Venkata Raman Kallakunta, Sandeep Sarabu, Priyanka Thipsay, Suresh Bandari & Michael A. Repka. (2020) Manufacturing strategies to develop amorphous solid dispersions: An overview. Journal of Drug Delivery Science and Technology 55, pages 101459.
Crossref
Crossref
Rishi Thakkar, Ruchi Thakkar, Amit Pillai, Eman A. Ashour & Michael A. Repka. (2020) Systematic screening of pharmaceutical polymers for hot melt extrusion processing: a comprehensive review. International Journal of Pharmaceutics 576, pages 118989.
Crossref
Crossref
Jeremiah F. Kelleher, Atif M. Madi, Gareth C. Gilvary, Y. W. Tian, Shu Li, Ammar Almajaan, Zoe S. Loys, David S. Jones, Gavin P. Andrews & Anne Marie Healy. (2019) Metformin Hydrochloride and Sitagliptin Phosphate Fixed-Dose Combination Product Prepared Using Melt Granulation Continuous Processing Technology. AAPS PharmSciTech 21:1.
Crossref
Crossref
Deck Khong Tan, Mohammed Maniruzzaman & Ali Nokhodchi. (2019) Development and Optimisation of Novel Polymeric Compositions for Sustained Release Theophylline Caplets (PrintCap) via FDM 3D Printing. Polymers 12:1, pages 27.
Crossref
Crossref
Mali A. S., Gavali K. V., Choudhari R. G., Anekar V. P. & Gavhane Y. N.. (2019) Review on Hot Melt Extrusion Technology and it's Application. International Journal of Scientific Research in Science and Technology, pages 253-260.
Crossref
Crossref
Ziyi Yang, Yang Hu, Gang Tang, Mingming Dong, Qi Liu & Xia Lin. (2019) Development of ibuprofen dry suspensions by hot melt extrusion: Characterization, physical stability and pharmacokinetic studies. Journal of Drug Delivery Science and Technology 54, pages 101313.
Crossref
Crossref
Vivek Puri, Manju Nagpal, Ameya Sharma, Gurjeet Singh Thakur, Manjinder Singh & Geeta Aggarwal. (2019) Development of binary dispersions and nanocomposites of irbesartan with enhanced antihypertensive activity. BioImpacts 10:4, pages 269-278.
Crossref
Crossref
Lamichhane, Park, Sohn & Lee. (2019) Customized Novel Design of 3D Printed Pregabalin Tablets for Intra-Gastric Floating and Controlled Release Using Fused Deposition Modeling. Pharmaceutics 11:11, pages 564.
Crossref
Crossref
Tietz & Klein. (2019) In Vitro Methods for Evaluating Drug Release of Vaginal Ring Formulations—A Critical Review. Pharmaceutics 11:10, pages 538.
Crossref
Crossref
Nadia Qamar, Nasir Abbas, Muhammad Irfan, Amjad Hussain, Muhammad Sohail Arshad, Sumera Latif, Faisal Mehmood & Muhammad Usman Ghori. (2019) Personalized 3D printed ciprofloxacin impregnated meshes for the management of hernia. Journal of Drug Delivery Science and Technology 53, pages 101164.
Crossref
Crossref
Xingyou Ye, Venkataraman Kallakunta, Dong Wuk Kim, Hemlata Patil, Roshan V. Tiwari, Sampada B. Upadhye, Ron S. Vladyka & Michael A. Repka. (2019) Effects of Processing on a Sustained Release Formulation Prepared by Twin-Screw Dry Granulation. Journal of Pharmaceutical Sciences 108:9, pages 2895-2904.
Crossref
Crossref
Hazal Ezgi Gültekin, Serdar Tort & Füsun Acartürk. (2019) An Effective Technology for the Development of Immediate Release Solid Dosage Forms Containing Low-Dose Drug: Fused Deposition Modeling 3D Printing. Pharmaceutical Research 36:9.
Crossref
Crossref
Galit Regev, Sravan Kumar Patel, Bernard J. Moncla, John Twist, Brid Devlin & Lisa C. Rohan. (2019) Novel Application of Hot Melt Extrusion for the Manufacturing of Vaginal Films Containing Microbicide Candidate Dapivirine. AAPS PharmSciTech 20:6.
Crossref
Crossref
Arvind Bagde, Ketan Patel, Shallu Kutlehria, Nusrat Chowdhury & Mandip Singh. (2019) Formulation of topical ibuprofen solid lipid nanoparticle (SLN) gel using hot melt extrusion technique (HME) and determining its anti-inflammatory strength. Drug Delivery and Translational Research 9:4, pages 816-827.
Crossref
Crossref
Bartholomew Yir-Erong, Marcel T Bayor, Isaac Ayensu, Stephen Y Gbedema & Joshua S Boateng. (2019) Oral thin films as a remedy for noncompliance in pediatric and geriatric patients. Therapeutic Delivery 10:7, pages 443-464.
Crossref
Crossref
Yubin Zhou, Devante Horne & Terry W.J. Steele. (2019) Tuning Drug Release via Twin Screw Extrusion in Polyester Films. Journal of Pharmaceutical Sciences 108:7, pages 2430-2437.
Crossref
Crossref
Rahul Lalge, Priyanka Thipsay, Vijay Kumar Shankar, Abhijeet Maurya, Manjeet Pimparade, Suresh Bandari, Feng Zhang, S. Narasimha Murthy & Michael A. Repka. (2019) Preparation and evaluation of cefuroxime axetil gastro-retentive floating drug delivery system via hot melt extrusion technology. International Journal of Pharmaceutics 566, pages 520-531.
Crossref
Crossref
G.P. Andrews, D.S. Jones, Z. Senta-Loys, A. Almajaan, S. Li, O. Chevallier, C. Elliot, A.M. Healy, J.F. Kelleher, A.M. Madi, G.C. Gilvary & Y. Tian. (2019) The development of an inline Raman spectroscopic analysis method as a quality control tool for hot melt extruded ramipril fixed-dose combination products. International Journal of Pharmaceutics 566, pages 476-487.
Crossref
Crossref
Bruna Barbon Paulo, Marcio Schmiele, Guilherme José Maximo & Ana Silvia Prata. (2019) Carnauba Wax Particles: Investigation of Dripping and Cold‐Extrusion Processes. Journal of the American Oil Chemists' Society 96:7, pages 847-859.
Crossref
Crossref
Romina Pezzoli, Michael Hopkins Jnr, Guillaume Direur, Noel Gately, John G. Lyons & Clement L. Higginbotham. (2019) Micro-Injection Moulding of Poly(vinylpyrrolidone-vinyl acetate) Binary and Ternary Amorphous Solid Dispersions. Pharmaceutics 11:5, pages 240.
Crossref
Crossref
Wenting Bao, Xianlong Zhang, Hong Wu, Rong Chen & Shaoyun Guo. (2019) Synergistic Effect of Ultrasound and Polyethylene Glycol on the Mechanism of the Controlled Drug Release from Polylactide Matrices. Polymers 11:5, pages 880.
Crossref
Crossref
Justyna Knapik-Kowalczuk, Krzysztof Chmiel, Karolina Jurkiewicz, Zaneta Wojnarowska, Mateusz Kurek, Renata Jachowicz & Marian Paluch. (2019) Influence of Polymeric Additive on the Physical Stability and Viscoelastic Properties of Aripiprazole. Molecular Pharmaceutics 16:4, pages 1742-1750.
Crossref
Crossref
Fabian J. Simons & Karl G. Wagner. (2019) Modeling, design and manufacture of innovative floating gastroretentive drug delivery systems based on hot-melt extruded tubes. European Journal of Pharmaceutics and Biopharmaceutics 137, pages 196-208.
Crossref
Crossref
Farooq A. Khan, Kaushik Narasimhan, C.S.V. Swathi, Sayyad Mustak, Gulam Mustafa, Mohammad Zaki Ahmad & Sohail Akhter. (2019) 3D Printing Technology in Customized Drug Delivery System: Current State of the Art, Prospective and the Challenges. Current Pharmaceutical Design 24:42, pages 5049-5061.
Crossref
Crossref
Justyna Knapik-Kowalczuk, Krzysztof Chmiel, Karolina Jurkiewicz, Natália Correia, Wiesław Sawicki & Marian Paluch. (2019) Physical Stability and Viscoelastic Properties of Co-Amorphous Ezetimibe/Simvastatin System. Pharmaceuticals 12:1, pages 40.
Crossref
Crossref
Maciej Gajda, Karol P. Nartowski, Janusz Pluta & Bożena Karolewicz. (2019) Continuous, one-step synthesis of pharmaceutical cocrystals via hot melt extrusion from neat to matrix-assisted processing – State of the art. International Journal of Pharmaceutics 558, pages 426-440.
Crossref
Crossref
Luke Schenck, Amanda K.P. Mann, Zhen Liu, Mikolaj Milewski, Siwei Zhang, Jie Ren, Kristel Dewitt, Andre Hermans & Aaron Cote. (2019) Building a better particle: Leveraging physicochemical understanding of amorphous solid dispersions and a hierarchical particle approach for improved delivery at high drug loadings. International Journal of Pharmaceutics 559, pages 147-155.
Crossref
Crossref
Hao Helen Hou, Aniruddha Rajesh, Keyur M. Pandya, Joseph W. Lubach, Ariel Muliadi, Edward Yost, Wei Jia & Karthik Nagapudi. (2019) Impact of Method of Preparation of Amorphous Solid Dispersions on Mechanical Properties: Comparison of Coprecipitation and Spray Drying. Journal of Pharmaceutical Sciences 108:2, pages 870-879.
Crossref
Crossref
Jens Wesholowski, Helmut Podhaisky & Markus Thommes. (2019) Comparison of residence time models for pharmaceutical twin-screw-extrusion processes. Powder Technology 341, pages 85-93.
Crossref
Crossref
Ilias El Aita, Jörg Breitkreutz & Julian Quodbach. (2019) On-demand manufacturing of immediate release levetiracetam tablets using pressure-assisted microsyringe printing. European Journal of Pharmaceutics and Biopharmaceutics 134, pages 29-36.
Crossref
Crossref
Kiran P. Sawant, Ritesh Fule, Mohammed Maniruzzaman & Purnima D. Amin. (2018) Extended release delivery system of metoprolol succinate using hot-melt extrusion: effect of release modifier on methacrylic acid copolymer. Drug Delivery and Translational Research 8:6, pages 1679-1693.
Crossref
Crossref
Tirtha Chatterjee, Kevin P. O’Donnell, Mark A. Rickard, Brian Nickless, Yongfu Li, Valeriy V. Ginzburg & Robert L. Sammler. (2018) Rheology of Cellulose Ether Excipients Designed for Hot Melt Extrusion. Biomacromolecules 19:11, pages 4430-4441.
Crossref
Crossref
A. Schittny, H. Ogawa, J. Huwyler & M. Puchkov. (2018) A combined mathematical model linking the formation of amorphous solid dispersions with hot-melt-extrusion process parameters. European Journal of Pharmaceutics and Biopharmaceutics 132, pages 127-145.
Crossref
Crossref
Deck Tan, Mohammed Maniruzzaman & Ali Nokhodchi. (2018) Advanced Pharmaceutical Applications of Hot-Melt Extrusion Coupled with Fused Deposition Modelling (FDM) 3D Printing for Personalised Drug Delivery. Pharmaceutics 10:4, pages 203.
Crossref
Crossref
Arabella M. McLaughlin, John RobertsonXiong-Wei Ni. (2018) On the Use of a Twin Screw Extruder for Continuous Solid Feeding and Dissolution for Continuous Flow Processes. Organic Process Research & Development 22:10, pages 1373-1382.
Crossref
Crossref
Maryam Karimi-Jafari, Luis Padrela, Gavin M. Walker & Denise M. Croker. (2018) Creating Cocrystals: A Review of Pharmaceutical Cocrystal Preparation Routes and Applications. Crystal Growth & Design 18:10, pages 6370-6387.
Crossref
Crossref
Mustafa Bookwala, Priyanka Thipsay, Samir Ross, Feng Zhang, Suresh Bandari & Michael A. Repka. (2018) Preparation of a crystalline salt of indomethacin and tromethamine by hot melt extrusion technology. European Journal of Pharmaceutics and Biopharmaceutics 131, pages 109-119.
Crossref
Crossref
Moritz Vollrath, Julia Engert & Gerhard Winter. (2018) New insights into process understanding of solid lipid extrusion (SLE) of extruded lipid implants for sustained protein delivery. European Journal of Pharmaceutics and Biopharmaceutics 130, pages 11-21.
Crossref
Crossref
Dilpreet Singh, Neena Bedi & Ashok K. Tiwary. (2017) Enhancing solubility of poorly aqueous soluble drugs: critical appraisal of techniques. Journal of Pharmaceutical Investigation 48:5, pages 509-526.
Crossref
Crossref
Marisa Rodrigues, Bárbara Baptista, João Almeida Lopes & Mafalda Cruz Sarraguça. (2018) Pharmaceutical cocrystallization techniques. Advances and challenges. International Journal of Pharmaceutics 547:1-2, pages 404-420.
Crossref
Crossref
Venkata Raman Kallakunta, Roshan Tiwari, Sandeep Sarabu, Suresh Bandari & Michael A. Repka. (2018) Effect of formulation and process variables on lipid based sustained release tablets via continuous twin screw granulation: A comparative study. European Journal of Pharmaceutical Sciences 121, pages 126-138.
Crossref
Crossref
Daniel J. Ellenberger, Dave A. Miller & Robert O. WilliamsIIIIII. (2018) Expanding the Application and Formulation Space of Amorphous Solid Dispersions with KinetiSol®: a Review. AAPS PharmSciTech 19:5, pages 1933-1956.
Crossref
Crossref
Gábor Vasvári, József Kalmár, Péter Veres, Miklós Vecsernyés, Ildikó Bácskay, Pálma Fehér, Zoltán Ujhelyi, Ádám Haimhoffer, Ágnes Rusznyák, Ferenc Fenyvesi & Judit Váradi. (2018) Matrix systems for oral drug delivery: Formulations and drug release. Drug Discovery Today: Technologies 27, pages 71-80.
Crossref
Crossref
José R. Hernández Espinell, Vilmalí López-Mejías & Torsten Stelzer. (2018) Revealing Polymorphic Phase Transformations in Polymer-Based Hot Melt Extrusion Processes. Crystal Growth & Design 18:4, pages 1995-2002.
Crossref
Crossref
Abbe Haser, Tu Cao, Joseph W. Lubach & Feng Zhang. (2018)
In Situ
Salt Formation during Melt Extrusion for Improved Chemical Stability and Dissolution Performance of a Meloxicam–Copovidone Amorphous Solid Dispersion
. Molecular Pharmaceutics 15:3, pages 1226-1237.
Crossref
Crossref
Chuntian Hu, Joshua E. Finkelstein, Wei Wu, Khrystyna Shvedova, Christopher J. Testa, Stephen C. Born, Bayan Takizawa, Thomas F. O'Connor, Xiaochuan Yang, Sukumar Ramanujam & Salvatore Mascia. (2018) Development of an automated multi-stage continuous reactive crystallization system with in-line PATs for high viscosity process. Reaction Chemistry & Engineering 3:5, pages 658-667.
Crossref
Crossref
Ann Newman, Susan M. Reutzel-Edens & George Zografi. (2018) Coamorphous Active Pharmaceutical Ingredient–Small Molecule Mixtures: Considerations in the Choice of Coformers for Enhancing Dissolution and Oral Bioavailability. Journal of Pharmaceutical Sciences 107:1, pages 5-17.
Crossref
Crossref
Marzena Rams-Baron, Renata Jachowicz, Elena Boldyreva, Deliang Zhou, Witold Jamroz & Marian PaluchMarzena Rams-Baron, Renata Jachowicz, Elena Boldyreva, Deliang Zhou, Witold Jamroz & Marian Paluch. 2018. Amorphous Drugs. Amorphous Drugs
159
223
.
Manjeet B. Pimparade, Anh Vo, Abhijeet S. Maurya, Jungeun Bae, Joseph T. Morott, Xin Feng, Dong Wuk Kim, Vijay I. Kulkarni, Roshan Tiwari, K. Vanaja, Reena Murthy, H.N. Shivakumar, D. Neupane, S.R. Mishra, S.N. Murthy & Michael A. Repka. (2017) Development and evaluation of an oral fast disintegrating anti-allergic film using hot-melt extrusion technology. European Journal of Pharmaceutics and Biopharmaceutics 119, pages 81-90.
Crossref
Crossref
James C. DiNunzio & James W. McGinity. 2017. Concise Encyclopedia of Biomedical Polymers and Polymeric Biomaterials. Concise Encyclopedia of Biomedical Polymers and Polymeric Biomaterials
451
475
.
James DiNunzioSeth ForsterChad Brown. 2017. Concise Encyclopedia of Biomedical Polymers and Polymeric Biomaterials. Concise Encyclopedia of Biomedical Polymers and Polymeric Biomaterials
827
844
.
Dhara Raijada, Lærke Arnfast, Andrew D. BondJohanna Aho, Johan Bøtker, Niklas Sandler & Jukka Rantanen. (2017) Dehydration of Nitrofurantoin Monohydrate during Melt Extrusion. Crystal Growth & Design 17:7, pages 3707-3715.
Crossref
Crossref
Abbe Haser, Siyuan Huang, Tony Listro, David White & Feng Zhang. (2017) An approach for chemical stability during melt extrusion of a drug substance with a high melting point. International Journal of Pharmaceutics 524:1-2, pages 55-64.
Crossref
Crossref
Anh Q. Vo, Xin Feng, Manjeet Pimparade, Xinyou Ye, Dong Wuk Kim, Scott T. Martin & Michael A. Repka. (2017) Dual-mechanism gastroretentive drug delivery system loaded with an amorphous solid dispersion prepared by hot-melt extrusion. European Journal of Pharmaceutical Sciences 102, pages 71-84.
Crossref
Crossref
Abbe Haser, Tu Cao, Joe Lubach, Tony Listro, Larry Acquarulo & Feng Zhang. (2017) Melt extrusion vs. spray drying: The effect of processing methods on crystalline content of naproxen-povidone formulations. European Journal of Pharmaceutical Sciences 102, pages 115-125.
Crossref
Crossref
Ajinkya M. Bhagurkar, Michael A. Repka & S. Narasimha Murthy. (2017) A Novel Approach for the Development of a Nanostructured Lipid Carrier Formulation by Hot-Melt Extrusion Technology. Journal of Pharmaceutical Sciences 106:4, pages 1085-1091.
Crossref
Crossref
Jun-Bom Park, Beom-Jin Lee, Chin-Yang Kang, Roshan V. Tiwari & Michael A. Repka. (2017) Process analytical quality control of tailored drug release formulation prepared via hot-melt extrusion technology. Journal of Drug Delivery Science and Technology 38, pages 51-58.
Crossref
Crossref
Akter Hossain, Uttom Nandi, Ritesh Fule, Ali Nokhodchi & Mohammed Maniruzzaman. (2017) Advanced surface chemical analysis of continuously manufactured drug loaded composite pellets. Journal of Colloid and Interface Science 492, pages 157-166.
Crossref
Crossref
Mohammed Maniruzzaman & Ali Nokhodchi. (2017) Continuous manufacturing via hot-melt extrusion and scale up: regulatory matters. Drug Discovery Today 22:2, pages 340-351.
Crossref
Crossref
Camille Adler, Alexandra Teleki & Martin Kuentz. (2016) Multifractal Characterization of Pharmaceutical Hot-Melt Extrudates. Pharmaceutical Research 34:2, pages 321-332.
Crossref
Crossref
Varsha Bhatt-Mehta, Robert B. MacArthur, Raimar Löbenberg, Jeffrey J. Cies, Ibolja Cernak & Richard H. ParrishIIII. (2016) Development of an algorithm to identify mass production candidate molecules to develop children’s oral medicines: a North American perspective. AAPS Open 2:1.
Crossref
Crossref
Divakar R. Jaiswar, Durgesh Jha & Purnima D. Amin. (2016) Preparation and characterizations of stable amorphous solid solution of azithromycin by hot melt extrusion. Journal of Pharmaceutical Investigation 46:7, pages 655-668.
Crossref
Crossref
Fengyuan Yang, Yongchao Su, Jingtao Zhang, James DiNunzio, Anthony Leone, Chengbin Huang & Chad D. Brown. (2016) Rheology Guided Rational Selection of Processing Temperature To Prepare Copovidone–Nifedipine Amorphous Solid Dispersions via Hot Melt Extrusion (HME). Molecular Pharmaceutics 13:10, pages 3494-3505.
Crossref
Crossref
Dong-Wook Kim, Chin-Yang Kang, Changmin Kang & Jun-Bom Park. (2016) Development of Pharmaceutical Dosage Forms with Biphasic Drug Release using Double-Melt Extrusion Technology. Journal of the Korea Academia-Industrial cooperation Society 17:9, pages 228-234.
Crossref
Crossref
Balázs Démuth, Attila Farkas, Attila Balogh, Karolina Bartosiewicz, Barnabás Kállai-Szabó, Johny Bertels, Tamás Vigh, Jurgen Mensch, Geert Verreck, Ivo Van Assche, György Marosi & Zsombor K. Nagy. (2016) Lubricant-Induced Crystallization of Itraconazole From Tablets Made of Electrospun Amorphous Solid Dispersion. Journal of Pharmaceutical Sciences 105:9, pages 2982-2988.
Crossref
Crossref
Shrawan Baghel, Helen Cathcart & Niall J. O'Reilly. (2016) Polymeric Amorphous Solid Dispersions: A Review of Amorphization, Crystallization, Stabilization, Solid-State Characterization, and Aqueous Solubilization of Biopharmaceutical Classification System Class II Drugs. Journal of Pharmaceutical Sciences 105:9, pages 2527-2544.
Crossref
Crossref
Jonathan Grimard, Laurent Dewasme & Alain Vande Wouwer. (2016) A Review of Dynamic Models of Hot-Melt Extrusion. Processes 4:2, pages 19.
Crossref
Crossref
G. Verstraete, J. Van Renterghem, P.J. Van Bockstal, S. Kasmi, B.G. De Geest, T. De Beer, J.P. Remon & C. Vervaet. (2016) Hydrophilic thermoplastic polyurethanes for the manufacturing of highly dosed oral sustained release matrices via hot melt extrusion and injection molding. International Journal of Pharmaceutics 506:1-2, pages 214-221.
Crossref
Crossref
Aleksandar Aleksovski, Pieter-Jan Van Bockstal, Robert Roškar, Tamás Sovány, Géza RegdonJr.Jr., Thomas De Beer, Chris Vervaet & Rok Dreu. (2016) Comparison of metoprolol tartrate multiple-unit lipid matrix systems produced by different technologies. European Journal of Pharmaceutical Sciences 88, pages 233-245.
Crossref
Crossref
Xin Feng, Anh Vo, Hemlata Patil, Roshan V Tiwari, Abdullah S Alshetaili, Manjeet B Pimparade & Michael A Repka. (2016) The effects of polymer carrier, hot melt extrusion process and downstream processing parameters on the moisture sorption properties of amorphous solid dispersions. Journal of Pharmacy and Pharmacology 68:5, pages 692-704.
Crossref
Crossref
Amitava Mitra, Li Li, Patrick Marsac, Brian Marks, Zhen Liu & Chad Brown. (2016) Impact of polymer type on bioperformance and physical stability of hot melt extruded formulations of a poorly water soluble drug. International Journal of Pharmaceutics 505:1-2, pages 107-114.
Crossref
Crossref
Elena Raviña-Eirin, Jhonny Azuaje, Eddy Sotelo, Jose Luis Gomez-Amoza & Ramon Martinez-Pacheco. (2016) Drug structural features affect drug delivery from hyperbranched polyesteramide hot melt extrudates. European Journal of Pharmaceutics and Biopharmaceutics 102, pages 1-8.
Crossref
Crossref
Fengyuan Yang, Yongchao Su, Lei Zhu, Chad D. Brown, Lawrence A. Rosen & Kenneth J. Rosenberg. (2016) Rheological and solid-state NMR assessments of copovidone/clotrimazole model solid dispersions. International Journal of Pharmaceutics 500:1-2, pages 20-31.
Crossref
Crossref
Justin S. LaFountaine, James W. McGinity & Robert O. WilliamsIIIIII. (2015) Challenges and Strategies in Thermal Processing of Amorphous Solid Dispersions: A Review. AAPS PharmSciTech 17:1, pages 43-55.
Crossref
Crossref
Abhishek Juluri, Carmen Popescu, Leon Zhou, Reena N. Murthy, Vanaja K. Gowda, Chetan Kumar P, Manjeet B. Pimparade, Michael A. Repka & S. Narasimha Murthy. (2015) Taste Masking of Griseofulvin and Caffeine Anhydrous Using Kleptose Linecaps DE17 by Hot Melt Extrusion. AAPS PharmSciTech 17:1, pages 99-105.
Crossref
Crossref
Hemlata Patil, Roshan V. Tiwari & Michael A. Repka. (2015) Hot-Melt Extrusion: from Theory to Application in Pharmaceutical Formulation. AAPS PharmSciTech 17:1, pages 20-42.
Crossref
Crossref
Laura Martinez-Marcos, Dimitrios A. Lamprou, Roy T. McBurney & Gavin W. Halbert. (2016) A novel hot-melt extrusion formulation of albendazole for increasing dissolution properties. International Journal of Pharmaceutics 499:1-2, pages 175-185.
Crossref
Crossref
Ritesh Fule, Vivek Paithankar & Purnima Amin. (2016) Hot melt extrusion based solid solution approach: Exploring polymer comparison, physicochemical characterization and in-vivo evaluation. International Journal of Pharmaceutics 499:1-2, pages 280-294.
Crossref
Crossref
S. A. Ross, D. A. Lamprou & D. Douroumis. (2016) Engineering and manufacturing of pharmaceutical co-crystals: a review of solvent-free manufacturing technologies. Chemical Communications 52:57, pages 8772-8786.
Crossref
Crossref
Thomas Kipping & Hubert Rein. (2016) Continuous production of controlled release dosage forms based on hot-melt extruded gum arabic: Formulation development, in vitro characterization and evaluation of potential application fields. International Journal of Pharmaceutics 497:1-2, pages 36-53.
Crossref
Crossref
Jonathan Grimard, Laurent Dewasme, Justine Thiry, Fabrice Krier, Brigitte Evrard & Alain Vande Wouwer. (2016) Modeling, sensitivity analysis and parameter identification of a twin screw extruder. IFAC-PapersOnLine 49:7, pages 1127-1132.
Crossref
Crossref
Anh Q. Vo, Xin Feng, Joseph T. Morott, Manjeet B. Pimparade, Roshan V. Tiwari, Feng Zhang & Michael A. Repka. (2016) A novel floating controlled release drug delivery system prepared by hot-melt extrusion. European Journal of Pharmaceutics and Biopharmaceutics 98, pages 108-121.
Crossref
Crossref
Ololade Olatunji & Olsson Richard. 2016. Natural Polymers. Natural Polymers
19
61
.
Chinna Reddy Palem, Narender Dudhipala, Sunil Kumar Battu, Satyanarayana Goda, Michael A. Repka & Madhusudan Rao Yamsani. (2015) Combined dosage form of pioglitazone and felodipine as mucoadhesive pellets via hot melt extrusion for improved buccal delivery with application of quality by design approach. Journal of Drug Delivery Science and Technology 30, pages 209-219.
Crossref
Crossref
Alvaro Goyanes, Hanah Chang, Daniel Sedough, Grace B. Hatton, Jie Wang, Asma Buanz, Simon Gaisford & Abdul W. Basit. (2015) Fabrication of controlled-release budesonide tablets via desktop (FDM) 3D printing. International Journal of Pharmaceutics 496:2, pages 414-420.
Crossref
Crossref
Ritesh Fule, Dinesh Dhamecha, Mohammed Maniruzzaman, Anubha Khale & Purnima Amin. (2015) Development of hot melt co-formulated antimalarial solid dispersion system in fixed dose form (ARLUMELT): Evaluating amorphous state and in vivo performance. International Journal of Pharmaceutics 496:1, pages 137-156.
Crossref
Crossref
A.L. Kelly, S.A. Halsey, R.A. Bottom, S. Korde, T. Gough & A Paradkar. (2015) A novel transflectance near infrared spectroscopy technique for monitoring hot melt extrusion. International Journal of Pharmaceutics 496:1, pages 117-123.
Crossref
Crossref
Hemlata Patil, Roshan V. Tiwari, Sampada B. Upadhye, Ronald S. Vladyka & Michael A. Repka. (2015) Formulation and development of pH-independent/dependent sustained release matrix tablets of ondansetron HCl by a continuous twin-screw melt granulation process. International Journal of Pharmaceutics 496:1, pages 33-41.
Crossref
Crossref
Saad M. Alshahrani, Joseph T. Morott, Abdullah S. Alshetaili, Roshan V. Tiwari, Soumyajit Majumdar & Michael A. Repka. (2015) Influence of degassing on hot-melt extrusion process. European Journal of Pharmaceutical Sciences 80, pages 43-52.
Crossref
Crossref
Varsha Bhatt-Mehta, Robert MacArthur, Raimar Löbenberg, Jeffrey Cies, Ibolja Cernak & Richard II. (2015) An Algorithm to Identify Compounded Non-Sterile Products that Can Be Formulated on a Commercial Scale or Imported to Promote Safer Medication Use in Children. Pharmacy 3:4, pages 284-294.
Crossref
Crossref
James DiNunzio, Seth Forster & Chad Brown. 2015. Handbook of Encapsulation and Controlled Release. Handbook of Encapsulation and Controlled Release
1127
1150
.
Hemlata Patil, Roshan Tiwari & Michael Repka. 2015. Handbook of Encapsulation and Controlled Release. Handbook of Encapsulation and Controlled Release
213
233
.
Péter Szabó, István Sebe, Bernadett Stiedl, Barnabás Kállai-Szabó & Romána Zelkó. (2015) Tracking of crystalline-amorphous transition of carvedilol in rotary spun microfibers and their formulation to orodispersible tablets for in vitro dissolution enhancement. Journal of Pharmaceutical and Biomedical Analysis 115, pages 359-367.
Crossref
Crossref
Saad M. Alshahrani, Wenli Lu, Jun-Bom Park, Joseph T. Morott, Bader B. Alsulays, Soumyajit Majumdar, Nigel Langley, Karl Kolter, Andreas Gryczke & Michael A. Repka. (2015) Stability-enhanced Hot-melt Extruded Amorphous Solid Dispersions via Combinations of Soluplus® and HPMCAS-HF. AAPS PharmSciTech 16:4, pages 824-834.
Crossref
Crossref
Vilas N. Malode, Anant Paradkar & Padma V. Devarajan. (2015) Controlled release floating multiparticulates of metoprolol succinate by hot melt extrusion. International Journal of Pharmaceutics 491:1-2, pages 345-351.
Crossref
Crossref
Milica Stanković, Henderik W. Frijlink & Wouter L.J. Hinrichs. (2015) Polymeric formulations for drug release prepared by hot melt extrusion: application and characterization. Drug Discovery Today 20:7, pages 812-823.
Crossref
Crossref
Rushiraj Jani & Dasharath Patel. (2015) Hot melt extrusion: An industrially feasible approach for casting orodispersible film. Asian Journal of Pharmaceutical Sciences 10:4, pages 292-305.
Crossref
Crossref
Peng Ke, Sheng Qi, Gabriele Sadowski & Defang Ouyang. 2015. Computational Pharmaceutics. Computational Pharmaceutics
81
100
.
Hrushikesh Karandikar, Rohan Ambardekar, Adrian Kelly, Tim Gough & Anant Paradkar. (2015) Systematic identification of thermal degradation products of HPMCP during hot melt extrusion process. International Journal of Pharmaceutics 486:1-2, pages 252-258.
Crossref
Crossref
B. Démuth, Z.K. Nagy, A. Balogh, T. Vigh, G. Marosi, G. Verreck, I. Van Assche & M.E. Brewster. (2015) Downstream processing of polymer-based amorphous solid dispersions to generate tablet formulations. International Journal of Pharmaceutics 486:1-2, pages 268-286.
Crossref
Crossref
Karin Becker, Sharareh Salar-Behzadi & Andreas Zimmer. (2015) Solvent-Free Melting Techniques for the Preparation of Lipid-Based Solid Oral Formulations. Pharmaceutical Research 32:5, pages 1519-1545.
Crossref
Crossref
Jingpei Piao, Jae-Young Lee, Jin Bae Weon, Choong Je Ma, Hyun-Jeong Ko, Dae-Duk Kim, Wie-Soo Kang & Hyun-Jong Cho. (2015) Angelica gigas Nakai and Soluplus-Based Solid Formulations Prepared by Hot-Melting Extrusion: Oral Absorption Enhancing and Memory Ameliorating Effects. PLOS ONE 10:4, pages e0124447.
Crossref
Crossref
Sindhuri Maddineni, Sunil Kumar Battu, Joe Morott, Soumyajit Majumdar, S. N. Murthy & Michael A. Repka. (2014) Influence of Process and Formulation Parameters on Dissolution and Stability Characteristics of Kollidon® VA 64 Hot-Melt Extrudates. AAPS PharmSciTech 16:2, pages 444-454.
Crossref
Crossref
Displaying 200 of 290 citing articles. Use the download link below to view the full list of citing articles.
Download full citations list