https://orcid.org/0000-0003-1468-2332
Citations (32)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (1)
Filippo Pinelli, Marjan Saadati, Ehsan Nazarzadeh Zare, Pooyan Makvandi, Maurizio Masi, Alessandro Sacchetti & Filippo Rossi. (2023) A perspective on the applications of functionalized nanogels: promises and challenges. International Materials Reviews 68:1, pages 1-25.
Read now
Read now
Articles from other publishers (31)
Bikram Jit Singh, Rippin Sehgal & Ravinder Pal Singh. (2023) Additive manufacturing in biomedical and healthcare sector: an umbrella review. International Journal on Interactive Design and Manufacturing (IJIDeM).
Crossref
Crossref
Derick Muhindo, Eman A. Ashour, Mashan Almutairi & Michael A. Repka. (2023) Development of Subdermal Implants Using Direct Powder Extrusion 3D Printing and Hot-Melt Extrusion Technologies. AAPS PharmSciTech 24:8.
Crossref
Crossref
Iván Yuste, Francis C. Luciano, Brayan J. Anaya, Pablo Sanz-Ruiz, Almudena Ribed-Sánchez, Elena González-Burgos & Dolores R. Serrano. (2023) Engineering 3D-Printed Advanced Healthcare Materials for Periprosthetic Joint Infections. Antibiotics 12:8, pages 1229.
Crossref
Crossref
Fatemeh Hosseini, Masoumeh Mirzaei Chegeni, Ali Bidaki, Mohammad Zaer, Hossein Abolhassani, Seyed Arsalan Seyedi, Seyed Ali Nabipoorashrafi, Arezoo Ashrafnia Menarbazari, Alaa Moeinzadeh, Ahmad Reza Farmani & Mohammad Tavakkoli Yaraki. (2023) 3D-printing-assisted synthesis of paclitaxel-loaded niosomes functionalized by cross-linked gelatin/alginate composite: Large-scale synthesis and in-vitro anti-cancer evaluation. International Journal of Biological Macromolecules 242, pages 124697.
Crossref
Crossref
Vineet R. Kulkarni, Jaidev Chakka, Faez Alkadi & Mohammed Maniruzzaman. (2023) Veering to a Continuous Platform of Fused Deposition Modeling Based 3D Printing for Pharmaceutical Dosage Forms: Understanding the Effect of Layer Orientation on Formulation Performance. Pharmaceutics 15:5, pages 1324.
Crossref
Crossref
Rutvi Agrawal, Akash Garg & Rohitas Deshmukh. (2023) A Snapshot of Current Updates and Future Prospects of 3D Printing in
Medical and Pharmaceutical Science. Current Pharmaceutical Design 29:8, pages 604-619.
Crossref
Crossref
Eun-Sol Ha, Hui-Taek Kang, Heejun Park, Sebin Kim & Min-Soo Kim. (2022) Advanced technology using supercritical fluid for particle production in pharmaceutical continuous manufacturing. Journal of Pharmaceutical Investigation 53:2, pages 249-267.
Crossref
Crossref
Nirali G. Patel & Abu T.M. Serajuddin. (2023) Improving drug release rate, drug-polymer miscibility, printability and processability of FDM 3D-printed tablets by weak acid-base interaction. International Journal of Pharmaceutics 632, pages 122542.
Crossref
Crossref
Nuha Mohammed AbdulkhaleqMowafaq M. Ghareeb. (2023) 3D Printing of Baclofen Gastro-Floating Drug Delivery Systems: A Comparison Study with In vitro and In vivo Evaluation. Research Journal of Pharmacy and Technology, pages 363-372.
Crossref
Crossref
Rajeshwar Kamal Kant Arya, Dheeraj Bisht, Karuna Dhondiyal, Meena Kausar, Hauzel Lalhlenmawia, Pem Lhamu Bhutia & Deepak Kumar. 2023. New Horizons for Industry 4.0 in Modern Business. New Horizons for Industry 4.0 in Modern Business
273
294
.
Xuejun Chen, Shanshan Wang, Jie Wu, Shuwei Duan, Xiaolong Wang, Xiaoxuan Hong, Xiaolu Han, Conghui Li, Dongzhou Kang, Zengming Wang & Aiping Zheng. (2022) The Application and Challenge of Binder Jet 3D Printing Technology in Pharmaceutical Manufacturing. Pharmaceutics 14:12, pages 2589.
Crossref
Crossref
Yimeng Jiao, Milica Stevic, Asma Buanz, Md Jasim Uddin & Slobodanka Tamburic. (2022) Current and Prospective Applications of 3D Printing in Cosmetics: A Literature Review. Cosmetics 9:6, pages 115.
Crossref
Crossref
Anqi Lu, Jiaxiang Zhang, Junhuang Jiang, Yu Zhang, Bhupendra R. Giri, Vineet R. Kulkarni, Niloofar Heshmati Aghda, Jiawei Wang & Mohammed Maniruzzaman. (2022) Novel 3D Printed Modular Tablets Containing Multiple Anti-Viral Drugs: a Case of High Precision Drop-on-Demand Drug Deposition. Pharmaceutical Research 39:11, pages 2905-2918.
Crossref
Crossref
Fang Luo & Qin Yang. (2022) Clinical Application of Digital 3D Reconstruction and 3D Printing Technology in Endometrial Cancer (EC) Surgery. Computational and Mathematical Methods in Medicine 2022, pages 1-8.
Crossref
Crossref
Margarethe Hauck, Dana Hellmold, Carolin Kubelt, Michael Synowitz, Rainer Adelung, Fabian Schütt & Janka Held‐Feindt. (2022) Localized Drug Delivery Systems in High‐Grade Glioma Therapy—From Construction to Application. Advanced Therapeutics 5:8, pages 2200013.
Crossref
Crossref
Guang Hu, Biao Zhang, Stephen M. Kelly, Jingjing Cui, Kailong Zhang, Weiwei Hu, Dandan Min, Shijie Ding & Wei Huang. (2022) Photopolymerisable liquid crystals for additive manufacturing. Additive Manufacturing 55, pages 102861.
Crossref
Crossref
Sanglae Kim, Alberto Andreu, Insup Kim, Jeong-Hwan Kim, Jiho Lee & Yong-Jin Yoon. (2022) Continuously varied infill pattern (ConVIP): improvement of mechanical properties and printing speed of fused filament fabrication (FFF) 3D printing. Journal of Materials Research and Technology 18, pages 1055-1069.
Crossref
Crossref
C. Anandharamakrishnan, Jeyan A. Moses & T. Anukiruthika. 2022. 3D Printing of Foods. 3D Printing of Foods
384
434
.
Jolanta Pyteraf, Adam Pacławski, Witold Jamróz, Aleksander Mendyk, Marian Paluch & Renata Jachowicz. (2022) Application and Multi-Stage Optimization of Daylight Polymer 3D Printing of Personalized Medicine Products. Pharmaceutics 14:4, pages 843.
Crossref
Crossref
Piotr Kulinowski, Piotr Malczewski, Marta Łaszcz, Ewelina Baran, Bartłomiej Milanowski, Mateusz Kuprianowicz & Przemysław Dorożyński. (2022) Development of Composite, Reinforced, Highly Drug-Loaded Pharmaceutical Printlets Manufactured by Selective Laser Sintering—In Search of Relevant Excipients for Pharmaceutical 3D Printing. Materials 15:6, pages 2142.
Crossref
Crossref
Sinmisola Oladeji, Valentyn Mohylyuk, David S. Jones & Gavin P. Andrews. (2022) 3D printing of pharmaceutical oral solid dosage forms by fused deposition: The enhancement of printability using plasticised HPMCAS. International Journal of Pharmaceutics 616, pages 121553.
Crossref
Crossref
Giovanni Falcone, Juan P. Real, Santiago D. Palma, Rita P. Aquino, Pasquale Del Gaudio, Emilia Garofalo & Paola Russo. (2022) Floating Ricobendazole Delivery Systems: A 3D Printing Method by Co-Extrusion of Sodium Alginate and Calcium Chloride. International Journal of Molecular Sciences 23:3, pages 1280.
Crossref
Crossref
Hamdy Abdelkader, Zeinab Fathalla, Ali Seyfoddin, Mojtaba Farahani, Thilini Thrimawithana, Ayman Allahham, Adam W.G. Alani, Ali A. Al-Kinani & Raid G. Alany. (2021) Polymeric long-acting drug delivery systems (LADDS) for treatment of chronic diseases: Inserts, patches, wafers, and implants. Advanced Drug Delivery Reviews 177, pages 113957.
Crossref
Crossref
Ehsan Nazarzadeh Zare, Tarun Agarwal, Atefeh Zarepour, Filippo Pinelli, Ali Zarrabi, Filippo Rossi, Milad Ashrafizadeh, Aziz Maleki, Mohammad-Ali Shahbazi, Tapas Kumar Maiti, Rajender S. Varma, Franklin R Tay, Michael R Hamblin, Virgilio Mattoli & Pooyan Makvandi. (2021) Electroconductive multi-functional polypyrrole composites for biomedical applications. Applied Materials Today 24, pages 101117.
Crossref
Crossref
Mengsuo Cui, Hao Pan, Yupei Su, Dongyang Fang, Sen Qiao, Pingtian Ding & Weisan Pan. (2021) Opportunities and challenges of three-dimensional printing technology in pharmaceutical formulation development. Acta Pharmaceutica Sinica B 11:8, pages 2488-2504.
Crossref
Crossref
Atheer Awad, Fabrizio Fina, Alvaro Goyanes, Simon Gaisford & Abdul W. Basit. (2021) Advances in powder bed fusion 3D printing in drug delivery and healthcare. Advanced Drug Delivery Reviews 174, pages 406-424.
Crossref
Crossref
Nirali G. Patel & Abu T.M. Serajuddin. (2021) Development of FDM 3D-printed tablets with rapid drug release, high drug-polymer miscibility and reduced printing temperature by applying the acid-base supersolubilization (ABS) principle. International Journal of Pharmaceutics 600, pages 120524.
Crossref
Crossref
Xiaonan Cao. (2021) Ink Art Three-Dimensional Big Data Three-Dimensional Display Index Prediction Model. Complexity 2021, pages 1-10.
Crossref
Crossref
Mengsuo Cui, Hao Pan, Dongyang Fang, Haowei Sun, Sen Qiao & Weisan Pan. (2021) Exploration and evaluation of dynamic dose-control platform for pediatric medicine based on Drop-on-Powder 3D printing technology. International Journal of Pharmaceutics 596, pages 120201.
Crossref
Crossref
Zaisam Al-Dulimi, Melissa Wallis, Deck Khong Tan, Mohammed Maniruzzaman & Ali Nokhodchi. (2021) 3D printing technology as innovative solutions for biomedical applications. Drug Discovery Today 26:2, pages 360-383.
Crossref
Crossref
Ayushi, Umesh Kumar Vates, Sanjay Mishra & Nand Jee Kanu. (2021) Biomimetic 4D printed materials: A state-of-the-art review on concepts, opportunities, and challenges. Materials Today: Proceedings 47, pages 3313-3319.
Crossref
Crossref