Keiji Nakayama & Masaaki Tanaka. (2023) Simulation Analysis of the Neutral and Charged Intermediate Species Produced in the Triboplasma Using the PIC/MCC Method. Tribology Letters 71:4.
Crossref
Bahman Azarhoushang. 2022. Tribology and Fundamentals of Abrasive Machining Processes. Tribology and Fundamentals of Abrasive Machining Processes
615
652
.
Ali Zahedi & Bahman Azarhoushang. 2022. Tribology and Fundamentals of Abrasive Machining Processes. Tribology and Fundamentals of Abrasive Machining Processes
689
719
.
Imran Ali, Al Arsh Basheer, Anastasia Kucherova, Nariman Memetov, Tatiana Pasko, Kirill Ovchinnikov, Vladimir Pershin, Denis Kuznetsov, Evgeny Galunin, Vladimir Grachev & Alexey Tkachev. (2019) Advances in carbon nanomaterials as lubricants modifiers. Journal of Molecular Liquids 279, pages 251-266.
Crossref
Abdel Dorgham, Chun Wang, Ardian Morina & Anne Neville. (2019) 3D tribo-nanoprinting using triboreactive materials. Nanotechnology 30:9, pages 095302.
Crossref
Shaohui Li, Zechao Di, Zhiyu Zhao, Yang Liu, Jingjing Xu, Haitao Cui, Dongsheng Huang, Zhongguo Liu & Yang Li. (2018) Effection of calcium phosphate tribofilm on anti-shudder performance in ATFs. Tribology International 120, pages 1-8.
Crossref
Xisheng Fu, Lingguo Sun, Xuguang Zhou, Jincan Yan & Tianhui Ren. (2016) Influence of hindered phenol on the tribochemistry of polysulfides in mineral oil and synthetic diester. Lubrication Science 28:5, pages 317-325.
Crossref
Mitsuki Itoga, Saiko Aoki, Akihito Suzuki, Yukio Yoshida, Yukitoshi Fujinami & Masabumi Masuko. (2016) Toward resolving anxiety about the accelerated corrosive wear of steel lubricated with the fluorine-containing ionic liquids at elevated temperature. Tribology International 93, pages 640-650.
Crossref
A. Sethuramiah & Rajesh Kumar. 2016. Modeling of Chemical Wear. Modeling of Chemical Wear
69
104
.
Keiji Nakayama. (2013) Effect of Normal Force on the Triboplasma Generation Under Oil Lubrication. Tribology Letters 53:2, pages 449-456.
Crossref
. 2014. Engineering Tribology. Engineering Tribology
371
428
.
Ioan D. Marinescu, W. Brian Rowe, Boris Dimitrov & Hitoshi Ohmori. 2013. Tribology of Abrasive Machining Processes. Tribology of Abrasive Machining Processes
483
517
.
Ioan D. Marinescu, W. Brian Rowe, Boris Dimitrov & Hitoshi Ohmori. 2013. Tribology of Abrasive Machining Processes. Tribology of Abrasive Machining Processes
441
481
.
G. F. Pavelko. (2012) Correlation between thermochemical and antiscuff characteristics of organosulfur compounds. Journal of Friction and Wear 33:6, pages 443-452.
Crossref
K Nakayama. (2011) Effect of magnetic field on the plasma generated during a sliding contact. Journal of Physics: Conference Series 301, pages 012069.
Crossref
Masabumi Masuko, Mikiya Shibatsuji, Masato Yokomizo, Saiko Aoki & Akihito Suzuki. (2011) On the effort to discriminate the principal function of tribofilm on friction under the boundary lubrication condition. Tribology International 44:6, pages 702-710.
Crossref
Keiji Nakayama. (2010) Mechanism of Triboplasma Generation in Oil. Tribology Letters 41:2, pages 345-351.
Crossref
C Matta, O L Eryilmaz, M I De Barros Bouchet, A Erdemir, J M Martin & K Nakayama. (2009) On the possible role of triboplasma in friction and wear of diamond-like carbon films in hydrogen-containing environments. Journal of Physics D: Applied Physics 42:7, pages 075307.
Crossref
O. N. Anand, Vijay Kumar, A. K. Singh & R. P. S. Bisht. (2007) Anti‐friction, anti‐wear and load‐carrying characteristics of environment friendly additive formulation. Lubrication Science 19:3, pages 159-167.
Crossref
Keiji Nakayama & Jean-Michel Martin. (2006) Tribochemical reactions at and in the vicinity of a sliding contact. Wear 261:3-4, pages 235-240.
Crossref
Gwidon W. Stachowiak & Andrew W. Batchelor. 2006. Engineering Tribology. Engineering Tribology
363
417
.
V. K. Chibber, R. B. Chaudhary, O. S. Tyagi & O. N. Anand. (2006) Anti wear and anti friction characteristics of tribochemical films of alkyl octa-decenoates and their derivatives. Lubrication Science 18:1, pages 63-76.
Crossref
Christopher Ciantar & Mark Hadfield. (2004) A study of tribological durability with associated environmental impacts of a domestic refrigerator. Materials & Design 25:4, pages 331-341.
Crossref
Hon So, Mathias Woydt, Zygmunt Rymuza, Czeslaw Kajdas, Michael Furey, Joz¡e Viz¡intin, Wilfred Tysoe, Peter Kotvis, Ilia Buyanovsky, Zinaida Ignatieva, Ruvim Zaslavsky, Matgorzata Ziomek-Moroz, Jeffrey Hawk, Einar Bardal & Asgeir Bardal. 2004. Surface Modification and Mechanisms. Surface Modification and Mechanisms.
Ioan D. Marinescu, W. Brian Rowe, Boris Dimitrov & Ichiro Inasaki. 2004. Tribology of Abrasive Machining Processes. Tribology of Abrasive Machining Processes
587
633
.
Ioan D. Marinescu, W. Brian Rowe, Boris Dimitrov & Ichiro Inasaki. 2004. Tribology of Abrasive Machining Processes. Tribology of Abrasive Machining Processes
531
585
.
Keiji Nakayama & Roman A. Nevshupa. (2003) Characteristics and Pattern of Plasma Generated at Sliding Contact. Journal of Tribology 125:4, pages 780-787.
Crossref
R. Unnikrishnan, J. Christopher, M. C. Jain, V. Martin & S. P. Srivastava. (2006) Comparison of boundary lubrication films formed under four‐ball friction test conditions with different AW/EP Additives‐an X‐ray photoelectron spectroscopy study. Tribotest 9:4, pages 285-303.
Crossref
Reizo Kaneko, Yuji Enomoto & Shigeyuki Mori. 2003. digital Encyclopedia of Applied Physics. digital Encyclopedia of Applied Physics.
. 2003. Tribochemistry of Lubricating Oils. Tribochemistry of Lubricating Oils
317
350
.
. 2003. Lubricated Wear - Science and Technology. Lubricated Wear - Science and Technology
99
131
.
Christopher McFadden, Cristian Soto & Nicholas D Spencer. (1997) Adsorption and surface chemistry in tribology. Tribology International 30:12, pages 881-888.
Crossref
Yong Wan, Lili Cao & Qunji Xue. (1997) Friction and wear characteristics of ZDDP in the sliding of steel against aluminum alloy. Tribology International 30:10, pages 767-772.
Crossref
Yong Wan, Qunji Xue & Lili Cao. (1997) Boundary lubrication of aluminum alloy with Cl-containing antiwear and extreme pressure additives. Wear 208:1-2, pages 57-60.
Crossref
Keiji Nakayama & Hiroshi Hashimoto. (1996) Triboemission, tribochemical reaction, and friction and wear in ceramics under various n-butane gas pressures. Tribology International 29:5, pages 385-393.
Crossref
Jen Fin Lin, Chau Chang Chou & San Tong Chen. (2006) The effect of surface chemistry in lubrication on the tribological behaviour of steel rollers under rolling‐sliding contacts. Tribotest 2:3, pages 205-234.
Crossref
Yong Wan & Qunji Xue. (1995) Effect of antiwear and extreme pressure additives on the wear of aluminium alloy in lubricated aluminium-on-steel contact. Tribology International 28:8, pages 553-557.
Crossref
Wan Yong & Xue Qunji. (1995) Friction and wear characteristics of p-containing antiwear and extreme pressure additives in the sliding of steel against aluminum alloy. Wear 188:1-2, pages 27-32.
Crossref
Keiji Nakayama. (1994) Triboemission of charged particles from various solids under boundary lubrication conditions. Wear 178:1-2, pages 61-67.
Crossref
S. Plaza, B. Mazurkiewicz & R. Gruziński. (1994) Thermal decomposition of dibenzyl disulphide and its load-carrying mechanism. Wear 174:1-2, pages 209-216.
Crossref
Jen Fin Lin, Jeng Hour Horng & Ke Yang Lee. (1993) The effect of an extreme pressure additive on the tribological behaviour of steel rollers with surface irregularities. Wear 169:1, pages 107-118.
Crossref
. 1993. Engineering TriBology. Engineering TriBology
425
484
.
O.N. Anand, Vijay Kumar, V.P. Malik & R.P.S. Bist. (1992) Load-carrying characteristics of reaction films of alkyl aryl sulphides. Wear 154:2, pages 349-359.
Crossref
Horst Czichos & Karl-Heinz HabigHorst Czichos & Karl-Heinz Habig. 1992. Tribologie-Handbuch. Tribologie-Handbuch
199
215
.
U.S. Choi, O.K. Kwon & A.R. Lansdown. (1991) The mechanism of action and performance of dialkyl 3,5-di-t-butyl 4-hydroxy benzyl phosphonates as a new antiwear additive. Wear 146:1, pages 63-77.
Crossref
. 1990. Encyclopedia of Tribology. Encyclopedia of Tribology
381
448
.
D. Cooper & J.L. Sullivan. (1989) The effect of additive concentration on the wear and friction of low alloy steel under conditions of boundary lubrication. Wear 131:2, pages 283-301.
Crossref
O.N. Anand, V.P. Malik & K.D. Neemla. (1986) Studies on extreme pressure films — reactions of sulphurized vegetable oils and alkyl phenols with iron. Tribology International 19:3, pages 128-132.
Crossref
. 1985. Mechanics and Chemistry in Lubrication. Mechanics and Chemistry in Lubrication
255
307
.
. 1985. Mechanics and Chemistry in Lubrication. Mechanics and Chemistry in Lubrication
198
254
.
Toshio Sakurai. (1984) Recent research on tribology in Japan. Wear 100:1-3, pages 543-560.
Crossref
Ph. Kapsa & J.M. Martin. (1982) Boundary lubricant films: a review. Tribology International 15:1, pages 37-42.
Crossref
W. O. Winer. 1982. Tribological Technology Volume I / II. Tribological Technology Volume I / II
407
467
.
Keiji Nakayama, Hiroyoshi Ogawa & Toshio Sakurai. (1981) Some aspects of the mechanism of chemical wear: A correlation between dynamic wear rate and static corrosion rate. Wear 68:2, pages 259-262.
Crossref
J.M. Georges. 1981. Microscopic Aspects of Adhesion and Lubrication, Proceedings of the 34th International Meeting of the Société de Chimie Physique. Microscopic Aspects of Adhesion and Lubrication, Proceedings of the 34th International Meeting of the Société de Chimie Physique
729
761
.
. 1980. Tribology of Thin Layers. Tribology of Thin Layers
215
222
.
H.B. Silver. (1978) The interaction between corrosion inhibitors and load carrying additives in mineral oil. Tribology International 11:3, pages 185-188.
Crossref
V. A. Serov, G. T. Malinovskii, V. P. Temnenko, V. A. Ostapenko & E. G. Berdichevskii. (1978) Compatibility of additives of different functional types in metal-cutting oils. Chemistry and Technology of Fuels and Oils 14:3, pages 214-216.
Crossref
M. Hirata, A. Masuko & H. Watanabe. (1978) A study of the frictional behavior of sulfur-phosphorus type industrial gear oils using the Timken test. Wear 46:2, pages 367-376.
Crossref
M. Tomaru, S. Hironaka & T. Sakurai. (1977) Effects of oxygen on the load-carrying action of some additives. Wear 41:1, pages 117-140.
Crossref
B. Dimitrov. (1975) Aspects of corrosive wear in lubricating media. Chemistry and Technology of Fuels and Oils 11:2, pages 139-142.
Crossref
A. Sethuramiah, H. Okabe & T. Sakurai. (1973) Critical temperatures in ep lubrication. Wear 26:2, pages 187-206.
Crossref
R.W. Mould, H.B. Silver & R.J. Syrett. (1973) Investigations of the activity of cutting oil additives. Wear 26:1, pages 27-37.
Crossref
R.W. Mould, H.B. Silver & R.J. Syrett. (1972) Investigations of the activity of cutting oil additives I. Organosulphur containing compounds. Wear 19:1, pages 67-80.
Crossref
Helga Dunken. (2010) Die Bedeutung tribochemischer Umsetzungen zwischen Additivs und Metallen bei Reibungs‐ und Verschleißvorgängen. Zeitschrift für Chemie 11:6, pages 213-219.
Crossref
E.S. Forbes. (1970) The load-carrying action of organo-sulphur compounds—A review. Wear 15:2, pages 87-96.
Crossref