Citations (80)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (25)
Agustín Bottari & Lautaro Braccia. (2023) Optimal Control Structure Selection Based on Economics for Continuous Cross-Flow Grain Dryer. Drying Technology 41:10, pages 1605-1619.
Read now
Read now
Gabriela Saldanha Soares, Scarlet Neves Tuchtenhagen, Luiz Antonio de Almeida Pinto & Carlos Alberto Severo Felipe. (2022) Monitoring of the fluidized bed particle drying process by temperature and pressure drop measurements. Drying Technology 40:9, pages 1935-1947.
Read now
Read now
Modesto P. Júnior, Moisés T. da Silva, Frederico G. Guimarães & Thiago A. M. Euzébio. (2022) Energy savings in a rotary dryer due to a fuzzy multivariable control application. Drying Technology 40:6, pages 1196-1209.
Read now
Read now
Yonglei Lin, Wuqiang Yang, Zhipeng Wu & Haigang Wang. (2022) Monitoring of high-moisture content particle drying in a fluidized bed by microwave and capacitance tomographic sensors. Drying Technology 40:6, pages 1153-1167.
Read now
Read now
Biplab Satpati, Chiranjib Koley & Subhashis Datta. (2020) Nonlinear model of pneumatic conveying dryer for economic process control. Drying Technology 38:11, pages 1516-1537.
Read now
Read now
Honglu Li & Songlin Chen. (2020) A neural-network-based model predictive control scheme for grain dryers. Drying Technology 38:8, pages 1079-1091.
Read now
Read now
Gustavo N. A. Vieira, Martín Olazar, José T. Freire & Fábio B. Freire. (2019) Real-time monitoring of milk powder moisture content during drying in a spouted bed dryer using a hybrid neural soft sensor. Drying Technology 37:9, pages 1184-1190.
Read now
Read now
Sebastian Paczkowski, Dirk Jaeger & Stefan Pelz. (2019) Semi-conductor metal oxide gas sensors for online monitoring of oak wood VOC emissions during drying. Drying Technology 37:9, pages 1081-1086.
Read now
Read now
Kyuya Nakagawa, Ango Tamura & Shuji Adachi. (2018) Optimization of food dye (betanin) retention during hot air drying: Design space calculation with consideration of reaction and substrate transfer kinetics. Drying Technology 36:15, pages 1920-1929.
Read now
Read now
Alex Martynenko. (2018) Artificial intelligence: Is it a good fit for drying?. Drying Technology 36:8, pages 891-892.
Read now
Read now
Jing Zhang, Chao Zhu, Li Hu, Hong Liu & Hong-Chun Pan. (2018) Effect of freeze-drying process on the physical stability and properties of Voriconazole complex system. Drying Technology 36:7, pages 871-878.
Read now
Read now
Peter Majerič, Rebeka Rudolf, Bernd Friedrich & Primoz Ternik. (2018) Numerical and experimental analysis of the single droplet evaporation in a ultrasonic spray pyrolysis device. Drying Technology 36:1, pages 11-20.
Read now
Read now
Uri Maurice, Maksim Mezhericher, Avi Levy & Irene Borde. (2017) Particle formation from droplet containing nanoparticles: Internal bubble growth. Drying Technology 35:8, pages 969-984.
Read now
Read now
Tong Tang, Zeguang Lu, Ge Zhou, Wanda Jia & Meng Wang. (2016) Effect of air velocity in dehumidification drying environment on one-component waterborne wood top coating drying process. Drying Technology 34:13, pages 1583-1592.
Read now
Read now
Omar F. Lutfy, Hazlina Selamat & S. B. Mohd Noor. (2015) Intelligent Modeling and Control of a Conveyor Belt Grain Dryer Using a Simplified Type 2 Neuro-Fuzzy Controller. Drying Technology 33:10, pages 1210-1222.
Read now
Read now
M. A. Delele, F. Weigler & J. Mellmann. (2015) Advances in the Application of a Rotary Dryer for Drying of Agricultural Products: A Review. Drying Technology 33:5, pages 541-558.
Read now
Read now
Ya Su, Min Zhang & Arun S. Mujumdar. (2015) Recent Developments in Smart Drying Technology. Drying Technology 33:3, pages 260-276.
Read now
Read now
FábioB. Freire, GustavoN. A. Vieira, JoséT. Freire & ArunS. Mujumdar. (2014) Trends in Modeling and Sensing Approaches for Drying Control. Drying Technology 32:13, pages 1524-1532.
Read now
Read now
Loyse Tussolini, Juarez
Souza de Oliveira, Fábio
Bentes Freire, José
Teixeira Freire & Everton
Fernando Zanoelo. (2014) Thin-Layer Drying of Mate Leaves (Ilex paraguariensis) in a Conveyor-Belt Dryer: A Semi-Automatic Control Strategy Based on a Dynamic Model. Drying Technology 32:12, pages 1457-1465.
Read now
Read now
Mortaza Aghbashlo, Rahmat Sotudeh-Gharebagh, Reza Zarghami, ArunS. Mujumdar & Navid Mostoufi. (2014) Measurement Techniques to Monitor and Control Fluidization Quality in Fluidized Bed Dryers: A Review. Drying Technology 32:9, pages 1005-1051.
Read now
Read now
Roberto Pisano, Davide Fissore & AntonelloA. Barresi. (2013) In-Line and Off-Line Optimization of Freeze-Drying Cycles for Pharmaceutical Products. Drying Technology 31:8, pages 905-919.
Read now
Read now
FranciscoA. Cubillos, Eduardo Vyhmeister, Gonzalo Acuña & PedroI. Alvarez. (2011) Rotary Dryer Control Using a Grey-Box Neural Model Scheme. Drying Technology 29:15, pages 1820-1827.
Read now
Read now
AntonioC. B. de Araújo, LuisG. S. Vasconcelos, JoséJ. N. Alves & Helen Shang. (2010) Optimal Operation of an Industrial PVC Dryer. Drying Technology 29:1, pages 19-34.
Read now
Read now
Ahmet Cay, Işık Tarakçıoğlu & Arif Hepbasli. (2010) Exergetic Analysis of Textile Convective Drying with Stenters by Subsystem Models: Part 2—Parametric Study on Exergy Analysis. Drying Technology 28:12, pages 1368-1376.
Read now
Read now
M.
Augustus Leon & S. Kumar. (2008) Design and Performance Evaluation of a Solar-Assisted Biomass Drying System with Thermal Storage. Drying Technology 26:7, pages 936-947.
Read now
Read now
Articles from other publishers (55)
A. J. Fernando & Kurt A. Rosentrater. (2023) Optimal Designs of Air Source Heat Pump Dryers in Agro-food Processing Industry. Food Engineering Reviews.
Crossref
Crossref
Zhiping Fan, Zhengyun Ren & Angang Chen. (2023) Multi-objective predictive control based on the cutting tobacco outlet moisture priority. Scientific Reports 13:1.
Crossref
Crossref
Chengjie Li, Zhuangdong Fang, Jiahao Zhong, Bin Li & Changyou Li. (2022) Evaluating the dynamic characteristics and energetic performance of a paddy multistage counter-flow dryer. Biosystems Engineering 221, pages 208-223.
Crossref
Crossref
Carlos Cuvas, Omar‐Jacobo Santos‐Sánchez, Patricio Ordaz & Liliam Rodríguez‐Guerrero. (2021) Suboptimal control for systems with commensurate and distributed delays of neutral type. International Journal of Robust and Nonlinear Control 32:6, pages 3190-3205.
Crossref
Crossref
Nurul’Ain Ab Jalil, Irfana Kabir Ahmad, Hassan Basri, Noor Ezlin Ahmad Basri, Hamidi Abdul Aziz, Lawrence K. Wang & Yung-Tse Hung. 2022. Solid Waste Engineering and Management. Solid Waste Engineering and Management
375
434
.
Omar-Jacobo Santos-Sanchez, Rodrigo-Edgardo Velasco-Rebollo, Liliam Rodriguez-Guerrero, Jesus-Patricio Ordaz-Oliver & Carlos Cuvas-Castillo. (2021) Lyapunov Redesign for Input and State Delays Systems by Using Optimal Predictive Control and Ultimate Bound Approaches: Theory and Experiments. IEEE Transactions on Industrial Electronics 68:12, pages 12575-12583.
Crossref
Crossref
Jin Lu & Suyun Xu. (2021) Post-treatment of food waste digestate towards land application: A review. Journal of Cleaner Production 303, pages 127033.
Crossref
Crossref
Simona Paulikienė, Justas Mingaila, Vladas Vilimas, Edmundas Bartkevičius, Pranas Viskelis & Algirdas Raila. (2021) Influence of Ozone on the Biochemical Composition of Birch Sap. Applied Sciences 11:7, pages 2965.
Crossref
Crossref
Donka Ivanova, Nikolay Valov & Irena Valova. (2020) Dynamic Control for Convective Apricots Dryer. Dynamic Control for Convective Apricots Dryer.
Zalizawati Abdullah, Farah Saleena Taip, Siti Mazlina Mustapa Kamal & Ribhan Zafira Abdul Rahman. (2020) Nonlinear Model-Based Inferential Control of Moisture Content of Spray Dried Coconut Milk. Foods 9:9, pages 1177.
Crossref
Crossref
Chunlong Jiang, Qizhao Lin, Chengxin Wang, Xuedan Jiang, Haobo Bi & Lin Bao. (2020) Experimental study of the ignition and combustion characteristics of cattle manure under different environmental conditions. Energy 197, pages 117143.
Crossref
Crossref
Angang Chen, Zhengyun Ren, Zhiping Fan & Xue Feng. (2020) Dead Band Zone Model Predictive Control of Cut Tobacco Drying Process. IEEE Access 8, pages 157781-157792.
Crossref
Crossref
Angang Chen, Zhengyun Ren, Zhiping Fan & Xue Feng. (2020) Two-Layered Model Predictive Control Strategy of the Cut Tobacco Drying Process. IEEE Access 8, pages 155697-155709.
Crossref
Crossref
V. Mäkinen & M. Vilkko. (2020) The modelling and simulation of a drying process in a poultry by-product processing plant. IFAC-PapersOnLine 53:2, pages 16858-16865.
Crossref
Crossref
Maleki, Ghazvini, Ahmadi, Maddah & Shamshirband. (2019) Moisture Estimation in Cabinet Dryers with Thin-Layer Relationships Using a Genetic Algorithm and Neural Network. Mathematics 7:11, pages 1042.
Crossref
Crossref
Nicolás Cervantes-Escorcia, Omar-Jacobo Santos-Sánchez, Liliam Rodríguez-Guerrero, Hugo Romero-Trejo & Alberto González-Facundo. (2018) Optimal PI and PID Temperature Controls for a Dehydration Process. Arabian Journal for Science and Engineering 44:3, pages 2519-2534.
Crossref
Crossref
Małgorzata Kowalska, Sławomir Janas & Magdalena Woźniak. (2018) Innovative application of the moisture analyzer for determination of dry mass content of processed cheese. Heat and Mass Transfer 54:10, pages 3071-3080.
Crossref
Crossref
Tiantian Liu, Chongwei Cui, Junguo He & Jian Tang. (2018) Effect of different bulking agents on water variation and thermal balance and their respective contribution to bio-generated heat during long-term storage sludge biodrying process. Environmental Science and Pollution Research 25:18, pages 17602-17610.
Crossref
Crossref
Liliam Rodríguez-Guerrero, Omar-Jacobo Santos-Sánchez, Nicolás Cervantes-Escorcia & Hugo Romero. (2017) Real-time discrete suboptimal control for systems with input and state delays: Experimental tests on a dehydration process. ISA Transactions 71, pages 448-457.
Crossref
Crossref
Nicholas Townsend Haas, Marianthi Ierapetritou & Ravendra Singh. (2017) Advanced Model Predictive Feedforward/Feedback Control of a Tablet Press. Journal of Pharmaceutical Innovation 12:2, pages 110-123.
Crossref
Crossref
Turkay Kondakci & Weibiao Zhou. (2016) Recent Applications of Advanced Control Techniques in Food Industry. Food and Bioprocess Technology 10:3, pages 522-542.
Crossref
Crossref
Biplab Satpati, Chiranjib Koley & Subhashis Datta. (2017) Sensor-Less Predictive Drying Control of Pneumatic Conveying Batch Dryers. IEEE Access 5, pages 3547-3568.
Crossref
Crossref
Norma-Francenia Santos-Sánchez, Raúl Salas-Coronado, Omar-Jacobo Santos-Sánchez, Hugo Romero & Erick Garrido-Aranda. (2016) On the effects of the temperature control at the performance of a dehydration process: energy optimization and nutrients retention. The International Journal of Advanced Manufacturing Technology 86:9-12, pages 3157-3171.
Crossref
Crossref
Liliam Rodríguez-Guerrero, Omar Santos-Sánchez & Sabine Mondié. (2016) A constructive approach for an optimal control applied to a class of nonlinear time delay systems. Journal of Process Control 40, pages 35-49.
Crossref
Crossref
Biplab Satpati, Chiranjib Koley & Subhashis Datta. (2016) Online estimation of rice powder moisture in a pneumatic conveying dryer. Online estimation of rice powder moisture in a pneumatic conveying dryer.
Mongkol Patcharavongsiri, Tusanee Tondee & Sombat Teekasap. (2016) Effect of Rotation Rate on Rotary Bio-drying of Dewatered Municipal Solid Waste. Effect of Rotation Rate on Rotary Bio-drying of Dewatered Municipal Solid Waste.
Roberto Lemus-Mondaca, Antonio Vega-Gálvez, Nelson O. Moraga & Sebastián Astudillo. (2015)
Dehydration of
S
tevia
rebaudiana
Bertoni Leaves: Kinetics, Modeling and Energy Features
. Journal of Food Processing and Preservation 39:5, pages 508-520.
Crossref
Crossref
A. Fuentes, J.P. Ploteau & P. Glouannec. (2015) Predictive control with multiobjective optimization: Application to a sludge drying operation. Computers & Chemical Engineering 78, pages 70-78.
Crossref
Crossref
Omar F. Lutfy, Hazlina Selamat & S. B. Mohd Noor. (2015) Modelling of a conveyor-belt grain dryer utilizing a sigmoid network. Modelling of a conveyor-belt grain dryer utilizing a sigmoid network.
M. Fernandez-Lopez, M. Puig-Gamero, D. Lopez-Gonzalez, Antonio Avalos-Ramirez, J. Valverde & L. Sanchez-Silva. (2015) Life cycle assessment of swine and dairy manure: Pyrolysis and combustion processes. Bioresource Technology 182, pages 184-192.
Crossref
Crossref
Thijs Defraeye. (2014) Advanced computational modelling for drying processes – A review. Applied Energy 131, pages 323-344.
Crossref
Crossref
Andres Hernandez, Robin De Keyser, Jose Manrique, Jose Oliden & William Ipanaque. (2014) Modeling and Nonlinear Model Predictive Control of a rotary disc dryer for fishmeal production. Modeling and Nonlinear Model Predictive Control of a rotary disc dryer for fishmeal production.
Maitraye Sen, Ravendra Singh & Rohit Ramachandran. (2014) A Hybrid MPC-PID Control System Design for the Continuous Purification and Processing of Active Pharmaceutical Ingredients. Processes 2:2, pages 392-418.
Crossref
Crossref
Ali Mesbah, Ashlee N. Ford Versypt, Xiaoxiang Zhu & Richard D. Braatz. (2013) Nonlinear Model-Based Control of Thin-Film Drying for Continuous Pharmaceutical Manufacturing. Industrial & Engineering Chemistry Research 53:18, pages 7447-7460.
Crossref
Crossref
Nadine Allanic, Pascal Le Bideau, Patrick Glouannec & Alain Bourmaud. (2014) Infrared drying of water based varnish coated on elastomer substrate. International Journal of Thermal Sciences 79, pages 103-110.
Crossref
Crossref
X. Jin, R.G.M. van der Sman, G. van Straten, R.M. Boom & A.J.B. van Boxtel. (2014) Energy efficient drying strategies to retain nutritional components in broccoli (Brassica oleracea var. italica). Journal of Food Engineering 123, pages 172-178.
Crossref
Crossref
CN Boeri, FJ Neto da Silva & JAF Ferreira. 2014. Mathematical Methods in Engineering. Mathematical Methods in Engineering
87
96
.
S. J. Kowalski, A. Rybicki & K. Rajewska. (2013) Optimal control of convective drying of saturated porous materials. AIChE Journal 59:12, pages 4846-4857.
Crossref
Crossref
M.-K.H. Winkler, M.H. Bennenbroek, F.H. Horstink, M.C.M. van Loosdrecht & G.-J. van de Pol. (2013) The biodrying concept: An innovative technology creating energy from sewage sludge. Bioresource Technology 147, pages 124-129.
Crossref
Crossref
James C. Atuonwu, Gerrit van Straten, Henk C. van Deventer & Antonius J.B. van Boxtel. (2012) On the controllability and energy sensitivity of heat-integrated desiccant adsorption dryers. Chemical Engineering Science 80, pages 134-147.
Crossref
Crossref
L. W. Tan, R. K. Raja Ahmad, M. N. Ibrahim & F. S. Taip. (2012) Relationship of lambda and overshoot of step response for a direct synthesis PI controller. Brazilian Journal of Chemical Engineering 29:3, pages 537-548.
Crossref
Crossref
Liliam Rodríguez-Guerrero, Omar López-Ortega & Omar Santos-Sánchez. (2011) Object-oriented optimal controller for a batch dryer system. The International Journal of Advanced Manufacturing Technology 58:1-4, pages 293-307.
Crossref
Crossref
O F Lutfy, S B Mohd Noor, M H Marhaban & K A Abbas. (2011) Non-linear modelling and control of a conveyor-belt grain dryer utilizing neuro-fuzzy systems. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering 225:5, pages 611-622.
Crossref
Crossref
Roberto Pisano, Davide Fissore & Antonello A. Barresi. (2011) Freeze-Drying Cycle Optimization Using Model Predictive Control Techniques. Industrial & Engineering Chemistry Research 50:12, pages 7363-7379.
Crossref
Crossref
Camila Boeri, Fernando Neto da Silva, Jorge Ferreira, Jorge Saraiva & Ângelo Salvador. (2011) Predicting the drying kinetics of salted codfish (Gadus Morhua): semi-empirical, diffusive and neural network models. International Journal of Food Science & Technology 46:3, pages 509-515.
Crossref
Crossref
Suellen Jensen, Luiz Augusto da Cruz Meleiro & Éverton Fernando Zanoelo. (2011) Soft-sensor model design for control of a virtual conveyor-belt dryer of mate leaves (Ilex paraguariensis). Biosystems Engineering 108:1, pages 75-85.
Crossref
Crossref
Zhou Huiling, Feng Yu & Liu Jingyun. 2011. Applied Informatics and Communication. Applied Informatics and Communication
304
311
.
Li-Ming Shao, Zhong-He Ma, Hua Zhang, Dong-Qing Zhang & Pin-Jing He. (2010) Bio-drying and size sorting of municipal solid waste with high water content for improving energy recovery. Waste Management 30:7, pages 1165-1170.
Crossref
Crossref
N. Daraoui, P. Dufour, H. Hammouri & A. Hottot. (2010) Model predictive control during the primary drying stage of lyophilisation. Control Engineering Practice 18:5, pages 483-494.
Crossref
Crossref
Alexander Schuster & Martin Kozek. (2009) Constrained model predictive control implementation in an industrial drying process. Constrained model predictive control implementation in an industrial drying process.
N. Allanic, P. Salagnac & P. Glouannec. (2009) Optimal constrained control of an infrared-convective drying of a polymer aqueous solution. Chemical Engineering Research and Design 87:7, pages 908-914.
Crossref
Crossref
C.A. Velis, P.J. Longhurst, G.H. Drew, R. Smith & S.J.T. Pollard. (2009) Biodrying for mechanical–biological treatment of wastes: A review of process science and engineering. Bioresource Technology 100:11, pages 2747-2761.
Crossref
Crossref
J. De Temmerman, P. Dufour, B. Nicolaï & H. Ramon. (2009) MPC as control strategy for pasta drying processes. Computers & Chemical Engineering 33:1, pages 50-57.
Crossref
Crossref
J.A Villegas, M. Li, S.R. Duncan, H.G. Wang & W.Q. Yang. (2008) Modeling and control of moisture content in a batch fluidized bed dryer using tomographic sensor. Modeling and control of moisture content in a batch fluidized bed dryer using tomographic sensor.
M. Rodríguez-Fernández, E. Balsa-Canto, J.A. Egea & J.R. Banga. (2007) Identifiability and robust parameter estimation in food process modeling: Application to a drying model. Journal of Food Engineering 83:3, pages 374-383.
Crossref
Crossref