Citations (572)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (67)
Kawthar Z. Alzarieni, Abdel Rahman Bani Amer, Tamam El-Elimat & Hilkka I. Kenttämaa. (2023) Characterization of Natural Cellulosic Fiber Obtained from the Flower Heads of Milk Thistle (Silybum marianum) as a Potential Polymer Reinforcement Material. Journal of Natural Fibers 20:2.
Read now
Read now
Manivel Selvaraj, Pannirselvam N, Ravichandran P T, Bhuvaneshwaran Mylsamy & Samson S. (2023) Extraction and Characterization of a New Natural Cellulosic Fiber from Bark of Ficus Carica Plant as Potential Reinforcement for Polymer Composites. Journal of Natural Fibers 20:2.
Read now
Read now
Sibakanta Sahu, Saipad B B P J Sahu, Subhakanta Nayak, Jagannath Mohapatra, Sujit Kumar Khuntia, Chandrabhanu Malla, Priyaranjan Samal, Saroj Kumar Patra & Suchismita Swain. (2023) Characterization of natural fiber extracted from Bauhinia vahlii bast subjected to different surface treatments: A potential reinforcement in polymer composite. Journal of Natural Fibers 20:1.
Read now
Read now
A. Udhayakumar, K. Mayandi, N. Rajini, R. Kanniga Devi, M. Muthukannan & M. Murali. (2023) Extraction and Characterization of Novel Natural Fiber from Cryptostegia Grandiflora as a Potential Reinforcement in Biocomposites. Journal of Natural Fibers 20:1.
Read now
Read now
Manivel Selvaraj, Prabesh Chapagain & Bhuvaneshwaran Mylsamy. (2023) Characterization Studies on New Natural Cellulosic Fiber Extracted from the Stem of Ageratina Adenophora Plant. Journal of Natural Fibers 20:1.
Read now
Read now
M. Miri, M. R. Ayatollahi, A. Akhavan-Safar & L. F. M. da Silva. (2022) Impact strength improvement of adhesively bonded structures using natural date palm tree fibers. Mechanics of Advanced Materials and Structures 0:0, pages 1-11.
Read now
Read now
Vijay Raghunathan, Kumaran Palani, Pottathil Shinu, Jafrey Daniel James Dhilip, Gunda Yoganjaneyulu & Saikrishnan Ganesh. (2022) Influence of Parthenium Hysterophorus and Impomea Pes-caprae Fibers Stacking Sequence on the Performance Characteristics of Epoxy Composites. Journal of Natural Fibers 19:12, pages 4456-4466.
Read now
Read now
Saikrishnan Ganesh, Jayakumari Lakshmanan Saraswathy, Vijay Raghunathan & Chitradevi Sivalingam. (2022) Extraction and Characterization Chemical Treated and Untreated Lycium ferocissimum Fiber for Epoxy Composites. Journal of Natural Fibers 19:13, pages 6509-6520.
Read now
Read now
Gabriel Torrente-Prato, María Daza-Gutiérrez, Alis Pataquiva-Mateus & Juan P. Morales-Arias. (2022) Study of Elastic Behavior of Polylactic Acid with Yanchama Fibers Composite Simulated as Elastic Orthotropic Material. Journal of Natural Fibers 19:13, pages 5741-5754.
Read now
Read now
Saipad B. B. P. J. Sahu, Sibakanta Sahu, Subhakanta Nayak & Manmatha K. Roul. (2022) Effect of Various Chemical Treatments on Physical, Mechanical, Thermal and Morphological Properties of Calotropis Gigantea Bast Fiber. Journal of Natural Fibers 19:16, pages 14208-14221.
Read now
Read now
Ravichandaran Rathinavelu, Eakambaram Arumugam & Baskara Sethupathi Paramathma. (2022) Extraction and Characterization of Natural Cellulose Fibers from the Buxus sempervirens for Composite Reinforcement. Journal of Natural Fibers 19:16, pages 13582-13595.
Read now
Read now
Baskara Sethupathi Paramathma, Madhu Sundaram, Vijayanand Palani, Vijay Raghunathan, Jafrey Daniel James Dhilip & Anish Khan. (2022) Characterization of Silane Treated and Untreated Citrullus lanatus Fibers Based eco-friendly Automotive Brake Friction Composites. Journal of Natural Fibers 19:16, pages 13273-13287.
Read now
Read now
Mukesh Chauhan, Sandeep Kumar, Aarti Kalra, Ankur Bisht, Kks Mer & Vinay Kumar Patel. (2022) Grey-Taguchi optimization of mechanical and abrasive wear properties for cotton grass fiber reinforced epoxy composites. Journal of Natural Fibers 19:15, pages 11722-11734.
Read now
Read now
Gokul Kannan, Rajasekaran Thangaraju, Palanikumar Kayaroganam & J. Paulo Davim. (2022) The Combined Effect of Banana Fiber and Fly Ash Reinforcements on the Mechanical Behavior of Polyester Composites. Journal of Natural Fibers 19:15, pages 11384-11403.
Read now
Read now
Figen Balo & Lutfu S. Sua. (2022) Hierarchical Model for Optimizing Natural Fiber Selection Process for Eco-design of Buildings. Journal of Natural Fibers 19:15, pages 10897-10909.
Read now
Read now
Vinu Kumar Shettahalli Mantaiah, Senthil Kumar Kallippatti Lakshmanan & Subramanian Kaliappagounder. (2022) Experimental Studies on Abrasion Wear and Thermal Characteristics of Plain Derived Flax Woven Fabric Reinforced Epoxy Composites. Journal of Natural Fibers 19:15, pages 10367-10382.
Read now
Read now
J. Manivannan, S. Rajesh, K. Mayandi, N. Rajini, Sikiru Oluwarotimi Ismail, Faruq Mohammad, Manja Kitek Kuzman & Hamad A. Al-Lohedan. (2022) Animal fiber characterization and fiber loading effect on mechanical behaviors of sheep wool fiber reinforced polyester composites. Journal of Natural Fibers 19:11, pages 4007-4023.
Read now
Read now
Sandip Kumar Nayak & Alok Satapathy. (2022) Mechanical and Dry Sliding Wear Characterization of Marble Dust and Short Kenaf Fiber Reinforced Hybrid Polyester Composites. Journal of Natural Fibers 19:14, pages 9235-9247.
Read now
Read now
Salar Zohoori, Sara Shahsavari, Mahboobeh Sabzali, Seyedeh Arezoo Hosseini, Reyhaneh Talebikatieklahijany & Zahra Morshedzadeh. (2022) Reinforcing of Viscose Fabric Using Nano Web of Palm-Cellulose Carbon Mesoporous Nanoparticle Composite. Journal of Natural Fibers 19:14, pages 8937-8945.
Read now
Read now
R. Gopinath, P. Billigraham & T.P. Sathishkumar. (2022) Physicochemical and Thermal Properties of New Cellulosic Fiber Obtained from the Stem of Markhamia lutea. Journal of Natural Fibers 19:14, pages 8429-8447.
Read now
Read now
R. Gopinath, P. Billigraham & T.P. Sathishkumar. (2022) Characterization Studies on New Natural Cellulosic Fiber Extracted from the Bark of Erythrina variegata. Journal of Natural Fibers 19:14, pages 8246-8265.
Read now
Read now
Vinayagam Mohanavel, Thandavamoorthy Raja, Anshul Yadav, Manickam Ravichandran & Jerzy Winczek. (2022) Evaluation of Mechanical and Thermal Properties of Jute and Ramie Reinforced Epoxy-based Hybrid Composites. Journal of Natural Fibers 19:14, pages 8022-8032.
Read now
Read now
Sundarrajan Dharmakrishnan, Pitchipoo Pandian & Manoharan Sembian. (2022) Sustainable Characterization of Silane Treated and Untreated Psidium Guajava Stem Natural Fibers Based Automobile Brake Pads. Journal of Natural Fibers 19:14, pages 7982-7995.
Read now
Read now
R Pandiyarajan, Starvin M, Belsam Jeba Ananth M, Marimuthu S, Sabarish S & S Ponsuriyaprakash. (2022) Experimental investigation of morphological and mechanical properties of SiC-neem-coir fiber reinforced hybrid composite. Journal of the Chinese Institute of Engineers 45:6, pages 532-542.
Read now
Read now
Prabu krishnasamy, G. Rajamurugan, S Aravindraj & P Edwin Sudhagar. (2022) Vibration and Wear Characteristics of Aloevera/Flax/Hemp Woven Fiber Epoxy Composite Reinforced with Wire Mesh and BaSO4. Journal of Natural Fibers 19:8, pages 2885-2901.
Read now
Read now
Ng Lin Feng, Sivakumar Dhar Malingam, Chen Wei Ping & Mohd Zulkefli Selamat. (2022) Mechanical characterization of metal-composite laminates based on cellulosic kenaf and pineapple leaf fiber. Journal of Natural Fibers 19:6, pages 2163-2175.
Read now
Read now
Saikrishnan Ganesh, Yoganjaneyulu Gunda, Sudhan Raj Jegan Mohan, Vijay Raghunathan & Jafrey Daniel James Dhilip. (2022) Influence of Stacking Sequence on the Mechanical and Water Absorption Characteristics of Areca Sheath-palm Leaf Sheath Fibers Reinforced Epoxy Composites. Journal of Natural Fibers 19:5, pages 1670-1680.
Read now
Read now
B. Gurukarthik Babu, D. Princewinston, S.S. Saravanakumar, Anish Khan, P.V. Aravind Bhaskar, S. Indran & D. Divya. (2022) Investigation on the Physicochemical and Mechanical Properties of Novel Alkali-treated Phaseolus vulgaris Fibers. Journal of Natural Fibers 19:2, pages 770-781.
Read now
Read now
Sangeetha Dharmalingam, Omkumar Meenakshisundaram, Vijayakumar Elumalai & Rajendra S. Boopathy. (2021) An Investigation on the Interfacial Adhesion between Amine Functionalized Luffa Fiber and Epoxy Resin and Its Effect on Thermal and Mechanical Properties of Their Composites. Journal of Natural Fibers 18:12, pages 2254-2269.
Read now
Read now
R Vijay, S. Manoharan, S. Arjun, A. Vinod & D. Lenin Singaravelu. (2021) Characterization of Silane-Treated and Untreated Natural Fibers from Stem of Leucas Aspera. Journal of Natural Fibers 18:12, pages 1957-1973.
Read now
Read now
A Soundhar & Jayakrishna Kandasamy. (2021) Mechanical, Chemical and Morphological Analysis of Crab shell/Sisal Natural Fiber Hybrid Composites. Journal of Natural Fibers 18:10, pages 1518-1532.
Read now
Read now
Mylsamy Bhuvaneshwaran, Sampath Pavayee Subramani, Sathish Kumar Palaniappan, Samir Kumar Pal & Sethuraman Balu. (2021) Natural Cellulosic Fiber from Coccinia Indica Stem for Polymer Composites: Extraction and Characterization. Journal of Natural Fibers 18:5, pages 644-652.
Read now
Read now
K. Hemachandra Reddy, R. Meenakshi Reddy, M. Ramesh, D. Mohana Krishnudu, B. Madhusudhan Reddy & H. Raghavendra Rao. (2021) Impact of Alkali Treatment on Characterization of Tapsi (Sterculia Urens) Natural Bark Fiber Reinforced Polymer Composites. Journal of Natural Fibers 18:3, pages 378-389.
Read now
Read now
P. Manimaran, S. P. Saravanan & M. Prithiviraj. (2021) Investigation of Physico Chemical Properties and Characterization of New Natural Cellulosic Fibers from the Bark of Ficus Racemosa. Journal of Natural Fibers 18:2, pages 274-284.
Read now
Read now
K. Yoganandam, P. Ganeshan, B. NagarajaGanesh & K. Raja. (2020) Characterization studies on Calotropis procera fibers and their performance as reinforcements in epoxy matrix. Journal of Natural Fibers 17:12, pages 1706-1718.
Read now
Read now
Jafrey Daniel James D, S. Manoharan, G. Saikrishnan & S. Arjun. (2020) Influence of Bagasse/Sisal Fibre Stacking Sequence on the Mechanical Characteristics of Hybrid-Epoxy Composites. Journal of Natural Fibers 17:10, pages 1497-1507.
Read now
Read now
Sekhar Das, Amiya Kumar Singha, Atin Chaudhuri & Prasanta Kumar Ganguly. (2019) Lengthwise jute fibre properties variation and its effect on jute–polyester composite. The Journal of The Textile Institute 110:12, pages 1695-1702.
Read now
Read now
Moon Mandal & Tarun K. Maji. (2019) Preparation, physical properties and ultraviolet resistance of wood nanocomposites based on modified soybean oil and bentonite. Wood Material Science & Engineering 14:6, pages 381-391.
Read now
Read now
P. Pandiarajan, M. Kathiresan & T. Sornakumar. (2019) Preparation of nanofiber particles from the leaf of Aristida hystrix and its characterization. Journal of Natural Fibers 16:6, pages 886-897.
Read now
Read now
Suhas Yeshwant Nayak, Srinivas Shenoy Heckadka & Linto George Thomas. (2019) Evaluation of physico-mechanical characteristics of cashew nut shell liquid-epoxy composites with Borassus and Tamarind fruit fibres as reinforcements. Journal of Natural Fibers 16:3, pages 328-341.
Read now
Read now
Amal Amin, Heba Kandil, A. M. Rabia, Doaa E. El. Nashar & Mohamed Nader Ismail. (2018) Enhancing The Mechanical and Dielectric Properties of EPDM Filled with Nanosized Rice Husk Powder. Polymer-Plastics Technology and Engineering 57:17, pages 1733-1742.
Read now
Read now
Jai Inder Preet Singh, Sehijpal Singh & Vikas Dhawan. (2018) Effect of Curing Temperature on Mechanical Properties of Natural Fiber Reinforced Polymer Composites. Journal of Natural Fibers 15:5, pages 687-696.
Read now
Read now
A. Vinod, R. Vijay & D. Lenin Singaravelu. (2018) ThermoMechanical Characterization of Calotropis gigantea Stem Powder-Filled Jute Fiber-Reinforced Epoxy Composites. Journal of Natural Fibers 15:5, pages 648-657.
Read now
Read now
P. Ganeshan, B. NagarajaGanesh, P. Ramshankar & K. Raja. (2018) Calotropis gigantea fibers: A potential reinforcement for polymer matrices. International Journal of Polymer Analysis and Characterization 23:3, pages 271-277.
Read now
Read now
Muhammad Haris Ameer, Khubab Shaker, Munir Ashraf, Mehmet Karahan, Yasir Nawab, Sheraz Ahmad & Muhammad Ali Nasir. (2017) Interdependence of moisture, mechanical properties, and hydrophobic treatment of jute fibre-reinforced composite materials. The Journal of The Textile Institute 108:10, pages 1768-1776.
Read now
Read now
Raghavendra Subramanya, Kestur Gundappa Satyanarayana & Balachandra Shetty Pilar. (2017) Evaluation of Structural, Tensile and Thermal Properties of Banana Fibers. Journal of Natural Fibers 14:4, pages 485-497.
Read now
Read now
Achla, S. N. Maiti & Josemon Jacob. (2017) Nonisothermal crystallization and microstructural behavior of poly(ε-caprolactone) and granular tapioca starch-based biocomposites. International Journal of Polymer Analysis and Characterization 22:3, pages 222-236.
Read now
Read now
M. Prithiviraj, R. Muralikannan, P. Senthamaraikannan & S. S. Saravanakumar. (2016) Characterization of new natural cellulosic fiber from the Perotis indica plant. International Journal of Polymer Analysis and Characterization 21:8, pages 669-674.
Read now
Read now
B. Venkatram, C. Kailasanathan, P. Seenikannan & S. Paramasamy. (2016) Study on the evaluation of mechanical and thermal properties of natural sisal fiber/general polymer composites reinforced with nanoclay. International Journal of Polymer Analysis and Characterization 21:7, pages 647-656.
Read now
Read now
Khalid Balaed, N. Z. Noriman, Omar S. Dahham, S. T. Sam, R. Hamzah & M. F. Omar. (2016) Characterization and properties of low-linear-density polyethylene/Typha latifolia composites. International Journal of Polymer Analysis and Characterization 21:7, pages 590-598.
Read now
Read now
V. P. Arthanarieswaran, A. Kumaravel, M. Kathirselvam & S. S. Saravanakumar. (2016) Mechanical and thermal properties of Acacia leucophloea fiber/epoxy composites: Influence of fiber loading and alkali treatment. International Journal of Polymer Analysis and Characterization 21:7, pages 571-583.
Read now
Read now
Olgun Güven, Sergio N. Monteiro, Esperidiana A. B. Moura & Jaroslaw W. Drelich. (2016) Re-Emerging Field of Lignocellulosic Fiber – Polymer Composites and Ionizing Radiation Technology in their Formulation. Polymer Reviews 56:4, pages 702-736.
Read now
Read now
T. Natarajan, A. Kumaravel & R. Palanivelu. (2016) Extraction and characterization of natural cellulosic fiber from Passiflora foetida stem. International Journal of Polymer Analysis and Characterization 21:6, pages 478-485.
Read now
Read now
Santosh K. Tiwari, Vijay Kumar, Andrzej Huczko, R. Oraon, A. De Adhikari & G. C. Nayak. (2016) Magical Allotropes of Carbon: Prospects and Applications. Critical Reviews in Solid State and Materials Sciences 41:4, pages 257-317.
Read now
Read now
Yizhong Chen, Yong Lin, Yuanfang Luo, Demin Jia & Lan Liu. (2016) Styrene butadiene rubber/carbon black composites modified by imidazole derivatives. International Journal of Polymer Analysis and Characterization 21:5, pages 447-457.
Read now
Read now
K. J. Nagarajan & A. N. Balaji. (2016) Extraction and characterization of alkali-treated red coconut empty fruit bunch fiber. International Journal of Polymer Analysis and Characterization 21:5, pages 387-395.
Read now
Read now
Asokan Pappu, Mohini Saxena, Vijay Kumar Thakur, Anusha Sharma & Ruhi Haque. (2016) Facile extraction, processing and characterization of biorenewable sisal fibers for multifunctional applications. Journal of Macromolecular Science, Part A 53:7, pages 424-432.
Read now
Read now
N. A. M. Aridi, S. M. Sapuan, E. S. Zainudin & Faris M. AL-Oqla. (2016) Mechanical and morphological properties of injection-molded rice husk polypropylene composites. International Journal of Polymer Analysis and Characterization 21:4, pages 305-313.
Read now
Read now
Sarah Abreu Moreira, Diego Quadros Melo, Ari C. Alves de Lima, Francisco Wagner Sousa, André Gadelha Oliveira, André Henrique B. Oliveira & Ronaldo Ferreira Nascimento. (2016) Removal of Ni2+, Cu2+, Zn2+, Cd2+ and Pb2+ ions from aqueous solutions using cashew peduncle bagasse as an eco-friendly biosorbent. Desalination and Water Treatment 57:22, pages 10462-10475.
Read now
Read now
M. K. Gupta & R. K. Srivastava. (2016) Mechanical Properties of Hybrid Fibers-Reinforced Polymer Composite: A Review. Polymer-Plastics Technology and Engineering 55:6, pages 626-642.
Read now
Read now
K. Santhanam, A. Kumaravel, S. S. Saravanakumar & V. P. Arthanarieswaran. (2016) Characterization of new natural cellulosic fiber from the Ipomoea staphylina plant. International Journal of Polymer Analysis and Characterization 21:3, pages 267-274.
Read now
Read now
B. NagarajaGanesh & R. Muralikannan. (2016) Physico-chemical, thermal, and flexural characterization of Cocos nucifera fibers. International Journal of Polymer Analysis and Characterization 21:3, pages 244-250.
Read now
Read now
V. P. Kommula, K. Obi Reddy, Mukul Shukla, Tshilidzi Marwala, E. V. Subba Reddy & A. Varada Rajulu. (2016) Extraction, modification, and characterization of natural ligno-cellulosic fiber strands from napier grass. International Journal of Polymer Analysis and Characterization 21:1, pages 18-28.
Read now
Read now
A. V. Ratna Prasad, K. Balakotesara Rao, K. Mohana Rao, K. Ramanaiah & S. P. Kumar Gudapati. (2015) Influence of Nanoclay on the Mechanical Performance of Wild Cane Grass Fiber-Reinforced Polyester Nanocomposites. International Journal of Polymer Analysis and Characterization 20:6, pages 541-556.
Read now
Read now
Faris M. AL-Oqla, S. M. Sapuan, M. R. Ishak & A. A. Nuraini. (2015) A Model for Evaluating and Determining the Most Appropriate Polymer Matrix Type for Natural Fiber Composites. International Journal of Polymer Analysis and Characterization 20:3, pages 191-205.
Read now
Read now
Ye Feng, B. Ashok, K. Madhukar, Jinming Zhang, Jun Zhang, K.
Obi Reddy & A.
Varada Rajulu. (2014) Preparation and Characterization of Polypropylene Carbonate Bio-Filler (Eggshell Powder) Composite Films. International Journal of Polymer Analysis and Characterization 19:7, pages 637-647.
Read now
Read now
Sathish Sugumaran, Chandar
Shekar Bellan & Manivannan Nadimuthu. (2014) Preparation and Characterizations of New Hybrid PVA-InAlO Thin Films by Dip Coating Method. International Journal of Polymer Analysis and Characterization 19:6, pages 549-561.
Read now
Read now
Articles from other publishers (505)
Kusum Saini, Vasant A. Matsagar & Venkatesh R. Kodur. (2024) Recent advances in the use of natural fibers in civil engineering structures. Construction and Building Materials 411, pages 134364.
Crossref
Crossref
M. Miri, M.R. Ayatollahi, A. Akhavan-Safar & L.F.M. da Silva. (2024) The effect of recycled date palm tree fibers on the impact fatigue and residual static strength of adhesively bonded joints. Composite Structures 327, pages 117664.
Crossref
Crossref
John Olumide Olusanya, Turup Pandurangan Mohan & Krishnan Kanny. (2023) Fracture toughness of hybrid natural fiber/nanoclay reinforced starch biocomposite material. Composites and Advanced Materials 32.
Crossref
Crossref
L. Natrayan, Gorti Janardhan, Prabhu Paramasivam & Seshathiri Dhanasekaran. (2023) Enhancing mechanical performance of TiO2 filler with Kevlar/epoxy-based hybrid composites in a cryogenic environment: a statistical optimization study using RSM and ANN methods. Frontiers in Materials 10.
Crossref
Crossref
Sumit Bhowmik, Santosh Kumar & Vijay Kumar Mahakur. (2023) Various factors affecting the fatigue performance of natural fiber-reinforced polymer composites: a systematic review. Iranian Polymer Journal.
Crossref
Crossref
T. Ramesh, S. S. Saravanakumar, B. Balavairavan & P. Senthamaraikannan. (2023) Development and Characterization of a Polylactic Acid/Sesame Husk Powder–Based Biocomposite Film for Packaging Application. Waste and Biomass Valorization.
Crossref
Crossref
Bianca-Iustina Andreica, Alexandru Anisiei, Irina Rosca & Luminita Marin. (2023) Quaternized chitosan-based nanofibers with strong antibacterial and antioxidant activity designed as ecological active food packaging. Food Packaging and Shelf Life 39, pages 101157.
Crossref
Crossref
Dandan Xu, Sheng He, Weiqi Leng, Yuhe Chen & Zaixing Wu. (2023) Replacing Plastic with Bamboo: A Review of the Properties and Green Applications of Bamboo-Fiber-Reinforced Polymer Composites. Polymers 15:21, pages 4276.
Crossref
Crossref
Sina Momeni, Kaylee Craplewe, Muhammad Safder, Sandra Luz, Dominic Sauvageau & Anastasia Elias. (2023) Accelerating the Biodegradation of Poly(lactic acid) through the Inclusion of Plant Fibers: A Review of Recent Advances. ACS Sustainable Chemistry & Engineering 11:42, pages 15146-15170.
Crossref
Crossref
Sandeep Kumar, Rakesh Dang, Alakesh Manna, Nishant Kumar Dhiman, Shubham Sharma, Shashi Prakash Dwivedi, Abhinav Kumar, Changhe Li, Elsayed M. Tag-Eldin & Mohamed Abbas. (2023) Optimization of Chemical Treatment Process Parameters for Enhancement of Mechanical Properties of Kenaf Fiber-Reinforced Polylactic Acid Composites: A comparative study of mechanical, morphological and microstructural analysis. Journal of Materials Research and Technology.
Crossref
Crossref
G. Suresh Kumar, Athota Rathan, Din Bandhu, B. Madhusudhan Reddy, H. Raghavendra Rao, Sujeeth Swami, Kuldeep K. Saxena, Sayed M. Eldin & Nittala Noel Anurag Prashanth. (2023) Mechanical and thermal characterization of coir/hemp/polyester hybrid composite for lightweight applications. Journal of Materials Research and Technology 26, pages 8242-8253.
Crossref
Crossref
Karthik Aruchamy, Bhuvaneshwaran Mylsamy, Sathish Kumar Palaniappan, Sampath Pavayee Subramani, Thirumurugan Velayutham, Sanjay Mavinkere Rangappa & Suchart Siengchin. (2023) Influence of weave arrangements on mechanical characteristics of cotton and bamboo woven fabric reinforced composite laminates. Journal of Reinforced Plastics and Composites 42:15-16, pages 776-789.
Crossref
Crossref
Mahima Samanth & K. Subrahmanya Bhat. (2023) Conventional and unconventional Chemical treatment methods of natural fibres for sustainable biocomposites. Sustainable Chemistry for Climate Action, pages 100034.
Crossref
Crossref
Belayne Zanini Marchi, Pedro Henrique Poubel Mendonça da Silveira, Wendell Bruno Almeida Bezerra, Lucio Fabio Cassiano Nascimento, Felipe Perissé Duarte Lopes, Verônica Scarpini Candido, Alisson Clay Rios da Silva & Sergio Neves Monteiro. (2023) Ballistic Performance, Thermal and Chemical Characterization of Ubim Fiber (Geonoma baculifera) Reinforced Epoxy Matrix Composites. Polymers 15:15, pages 3220.
Crossref
Crossref
Farooq Rauf, Muhammad Umair, Khubab Shaker, Yasir Nawab, Tehseen Ullah & Sheraz Ahmad. (2023) Investigation of Chemical Treatments to Enhance the Mechanical Properties of Natural Fiber Composites. International Journal of Polymer Science 2023, pages 1-13.
Crossref
Crossref
Xiaoyan He, Lisheng Tang, Jun Zheng, Yuanyuan Jin, Ruobin Chang, Xiaoquan Yu, Yihu Song & Ran Huang. (2023) A Novel UV Barrier Poly(lactic acid)/Poly(butylene succinate) Composite Biodegradable Film Enhanced by Cellulose Extracted from Coconut Shell. Polymers 15:14, pages 3000.
Crossref
Crossref
Uchenna Luvia Ezeamaku, Chinyere Ezekannagha, Ochiagha I. Eze, Nkiru Odimegwu, Angela Nwakaudu, Amarachukwu Okafor, Innocent Ekuma & Okechukwu Dominic Onukwuli. (2022)
The impact of potassium permanganate (KMnO
4
) treatment on the tensile strength of pineapple leaf fiber reinforced with tapioca-based bio resin
. Arab Gulf Journal of Scientific Research 41:3, pages 416-426.
Crossref
Crossref
Barshan Dev, Ashikur Rahman, Rubel Alam, Reazuddin Repon & Yasir Nawab. (2023) Mapping the progress in natural fiber reinforced composites: Preparation, mechanical properties, and applications. Polymer Composites 44:7, pages 3748-3788.
Crossref
Crossref
Okan Çelik, Abdulkadir Yaşar & Berkay Karaçor. (2023) Properties of basalt/aramid fiber reinforced hybrid composites compared to carbon fiber composites. Polymer Composites 44:6, pages 3509-3521.
Crossref
Crossref
E. Fantin Irudaya Raj, M. Appadurai, Vishal Ram, Augustine Mathu Gnaniah & Surender Reddy Salkuti. (2023) Natural-Fibre-Reinforced Composite-Based Micro-Size Wind Turbines: Numerical Analysis and Feasibility Study. Journal of Composites Science 7:5, pages 197.
Crossref
Crossref
Praveen Nagarajan Durai, Kathir Viswalingam, B. Senthilkumar, Divya Divakaran & Suchart Siengchin. (2023) Effect of alkalization on physical, chemical, thermal, tensile, and surface morphological properties of Musa acuminata peduncles fiber. Biomass Conversion and Biorefinery.
Crossref
Crossref
Akansha Gupta, Pooja Ghosh, Kalpana Arora, Satyawati Sharma & Sunil Kumar. (2023) Valorization potential of pine needle waste biomass: recent trends and future perspectives. Environmental Science and Pollution Research.
Crossref
Crossref
Md Masum Reza, Hosne Ara Begum & Ahmed Jalal Uddin. (2023) Potentiality of sustainable corn starch-based biocomposites reinforced with cotton filter waste of spinning mill. Heliyon 9:5, pages e15697.
Crossref
Crossref
Vijay Raghunathan, Vinod Ayyappan, Jafrey Daniel James Dhilip, D. Sundarrajan, Sanjay Mavinkere Rangappa & Suchart Siengchin. (2023) Influence of alkali-treated and raw Zanthoxylum acanthopodium fibers on the mechanical, water resistance, and morphological behavior of polymeric composites for lightweight applications. Biomass Conversion and Biorefinery.
Crossref
Crossref
Tapas Debsharma, Stéphanie Engelen, Ives De Baere, Wim Van Paepegem & Filip Du Prez. (2023) Resorcinol‐Derived Vitrimers and Their Flax Fiber‐Reinforced Composites Based on Fast Siloxane Exchange. Macromolecular Rapid Communications 44:8.
Crossref
Crossref
Abrar Hussain, Vitali Podgursky, Dmitri Goljandin & Maksim Antonov. (2023) Industrial approach to circularity of polymer composites: Processing, characterization, mechanical testing, and wear regression. Journal of Reinforced Plastics and Composites, pages 073168442311645.
Crossref
Crossref
Mouad Chakkour, Mohamed Ould Moussa, Ismail Khay, Mohamed Balli & Tarak Ben Zineb. (2022) Towards widespread properties of cellulosic fibers composites: A comprehensive review. Journal of Reinforced Plastics and Composites 42:5-6, pages 222-263.
Crossref
Crossref
Lucas de Mendonça Neuba, Artur Camposo Pereira, Raí Felipe Pereira Junio, Andressa Teixeira Souza, Yago Soares Chaves, Michel Picanço Oliveira & Sergio Neves Monteiro. (2023) Ballistic performance of Cyperus malaccensis sedge fibers reinforcing epoxy matrix as a standalone target. Journal of Materials Research and Technology 23, pages 4367-4375.
Crossref
Crossref
Antoine Ishak, Rodolphe Sonnier, Belkacem Otazaghine & Claire Longuet. (2023) Silazanes, a novel flax fibers functionalization: Effect on silicone-based composites. Composites Part A: Applied Science and Manufacturing 166, pages 107382.
Crossref
Crossref
Muneer Ahmed. Musthaq, Hom Nath Dhakal, Zhongyi Zhang, Antigoni Barouni & Rizal Zahari. (2023) The Effect of Various Environmental Conditions on the Impact Damage Behaviour of Natural-Fibre-Reinforced Composites (NFRCs)—A Critical Review. Polymers 15:5, pages 1229.
Crossref
Crossref
Tae Hoon Kim, Seung Hyeon Park, Seoku Lee, A.V.S.L. Sai Bharadwaj, Yang Soo Lee, Chang Geun Yoo & Tae Hyun Kim. (2023) A Review of Biomass-Derived UV-Shielding Materials for Bio-Composites. Energies 16:5, pages 2231.
Crossref
Crossref
Ravi Kumar Cheedarala, Ruiwen Yu & Jung Il Song. (2023) Renewable micro hydroxyapatite (mHA) extracted from animal bones, and fabricated mHA-Jute-vinyl ester bio-composite as an intumescent green flame retardant material. Materials Advances 4:4, pages 1171-1187.
Crossref
Crossref
Benjamin Barthod-Malat, Maxime Hauguel, Karim Behlouli, Michel Grisel & Géraldine Savary. (2023) Influence of the Compression Molding Temperature on VOCs and Odors Produced from Natural Fiber Composite Materials. Coatings 13:2, pages 371.
Crossref
Crossref
D. Gyasi-Antwi & Ohene Boansi Apea. (2023) Novel copper-sawdust nanocomposite preparation and evaluation. Results in Chemistry 5, pages 100741.
Crossref
Crossref
Chikesh Ranjan, Gautam Sarkhel & Kaushik Kumar. (2023) Efficacy of natural fibre reinforced biodegradable composite towards industrial products – An extensive review. Materials Today: Proceedings 92, pages 1047-1054.
Crossref
Crossref
Badhan Saha, Md. Araful Hoque, Sharzil Huda Tahsin, Khairun Nasrin Rimi, Ariya Tahasin Prova, Dipta Dey, Sazedur Rahman & Md Zillur Rahman. 2023. Reference Module in Materials Science and Materials Engineering. Reference Module in Materials Science and Materials Engineering.
M. Jubaer Alam, Md. Jaynal Abedin & Md. Zillur Rahman. 2023. Reference Module in Materials Science and Materials Engineering. Reference Module in Materials Science and Materials Engineering.
Gobinath Velu Kaliyannan, Rajasekar Rathanasamy, Harikrishna Kumar Mohan Kumar, Mohan Kumar Anand Raj, Moganapriya Chinnasamy, Samir Kumar Pal & Sathish Kumar Palaniappan. 2023. Green Sustainable Process for Chemical and Environmental Engineering and Science. Green Sustainable Process for Chemical and Environmental Engineering and Science
145
165
.
Mohammad Mahdi Shalchian & Mahyar Arabani. (2022) Application of plant-derived fibers in soil reinforcement on experimental, numerical, and case study scales: a review. Bulletin of Engineering Geology and the Environment 82:1.
Crossref
Crossref
Ashwini Karrupaswamy, Jayavel Sridhar, D. Aravind, K. Senthilkumar, T. Senthil Muthu Kumar, M. Chandrasekar & N. Rajini. 2023. Green Hybrid Composite in Engineering and Non-Engineering Applications. Green Hybrid Composite in Engineering and Non-Engineering Applications
211
231
.
S. Senthilrajan, N. Venkateshwaran, Rajini Nagarajan, Sikiru Oluwarotimi Ismail, P. Sivaranjana & Suchart Siengchin. 2023. Fiber Reinforced Polymeric Materials and Sustainable Structures. Fiber Reinforced Polymeric Materials and Sustainable Structures
159
173
.
Hossein Mohammadi, Zaini Ahmad, Saiful Amri Mazlan, Mohd Aidy Faizal Johari, Geralt Siebert, Michal Petrů & Seyed Saeid Rahimian Koloor. (2022) Lightweight Glass Fiber-Reinforced Polymer Composite for Automotive Bumper Applications: A Review. Polymers 15:1, pages 193.
Crossref
Crossref
Francesca Ferrari, Raffaella Striani, Daniela Fico, Mohammad Mahbubul Alam, Antonio Greco & Carola Esposito Corcione. (2022) An Overview on Wood Waste Valorization as Biopolymers and Biocomposites: Definition, Classification, Production, Properties and Applications. Polymers 14:24, pages 5519.
Crossref
Crossref
Sodagudi Francis XavierS.F. Xavier. 2022. Thermoplastic Polymer Composites. Thermoplastic Polymer Composites
185
367
.
Celia Idres, Mustapha Kaci, Nadjet Dehouche, Carole Lainé & Stéphane Bruzaud. (2022) Effect of Agave Americana fibers content on morphology and mechanical, rheological, and thermal properties of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) biocomposites. Polymers from Renewable Resources 13:4, pages 191-205.
Crossref
Crossref
Sudhakar Behera, Rakesh Kumar Gautam & Sunil Mohan. (2022) The effect of eco-friendly chemical treatment on sisal fiber and its epoxy composites: thermal, mechanical, tribological and morphological properties. Cellulose 29:17, pages 9055-9072.
Crossref
Crossref
Mahmuda Akter, Md Haris Uddin & Imana Shahrin Tania. (2022) Biocomposites based on natural fibers and polymers: A review on properties and potential applications. Journal of Reinforced Plastics and Composites 41:17-18, pages 705-742.
Crossref
Crossref
Deepak Kumar & Apurba Mandal. (2022) Review on manufacturing and fundamental aspects of laminated bamboo products for structural applications. Construction and Building Materials 348, pages 128691.
Crossref
Crossref
Juliana M. Farias da Silva, Jéssica P. Soares da Silva & Bluma G. Soares. (2021) Reinforced epoxy-based laminates containing agro-industrial waste fiber from peach palm tree: effect of the matrix modification. Polymer Bulletin 79:9, pages 7679-7696.
Crossref
Crossref
Kirti Mishra, Nishu Devi, Samarjeet Singh Siwal, Qibo Zhang, Walaa F. Alsanie, Fabrizio Scarpa & Vijay Kumar Thakur. (2022) Ionic Liquid‐Based Polymer Nanocomposites for Sensors, Energy, Biomedicine, and Environmental Applications: Roadmap to the Future. Advanced Science 9:26.
Crossref
Crossref
Si Zhang, Zhengjin Xiong, Jian Zhang, Xueting Zhang, Yuhang Chen & Yun Chen. (2022) Mechanical properties and thermal analysis of graphene nanoplatelets reinforced polyimine composites. e-Polymers 22:1, pages 696-704.
Crossref
Crossref
Pamela Pinto Neves, Ulisses Oliveira Costa, Wendell Bruno Almeida Bezerra, André Ben-Hur da Silva Figueiredo, Sergio Neves Monteiro & Lucio Fabio Cassiano Nascimento. (2022) Dynamic and Ballistic Performance of Uni- and Bidirectional Pineapple Leaf Fibers (PALF)-Reinforced Epoxy Composites Functionalized with Graphene Oxide. Polymers 14:16, pages 3249.
Crossref
Crossref
Neha Uppal, Asokan Pappu, Vijaya Kumar Sorna Gowri & Vijay Kumar Thakur. (2022) Cellulosic fibres-based epoxy composites: From bioresources to a circular economy. Industrial Crops and Products 182, pages 114895.
Crossref
Crossref
Emese Pregi, Gábor Faludi, Dávid Kun, János Móczó & Béla Pukánszky. (2022) Three-component polypropylene/lignin/flax composites with high natural additive content for structural applications. Industrial Crops and Products 182, pages 114890.
Crossref
Crossref
Gurupranes SV, Rajendran I & Shanmuga Sundaram N. (2022)
Suitability assessment of raw‐alkalized
Ziziphus nummularia
bark fibers and its polymeric composites for lightweight applications
. Polymer Composites 43:8, pages 5059-5075.
Crossref
Crossref
L. Natrayan, S. Kaliappan, S. Baskara Sethupathy, S. Sekar, Pravin P. Patil, S. Raja, G. Velmurugan & Dereje Bayisa Abdeta. (2022) Investigation on Interlaminar Shear Strength and Moisture Absorption Properties of Soybean Oil Reinforced with Aluminium Trihydrate-Filled Polyester-Based Nanocomposites. Journal of Nanomaterials 2022, pages 1-8.
Crossref
Crossref
Kuzhandaivel Jayaprakash, Atieh Osama, Rajinikanth Rajagopal, Bernard Goyette & Obulisamy Parthiba Karthikeyan. (2022) Agriculture Waste Biomass Repurposed into Natural Fibers: A Circular Bioeconomy Perspective. Bioengineering 9:7, pages 296.
Crossref
Crossref
P. S. Zakharov, A. E. Shkuro, V. V. Glukhikh, O. V. Stoyanov & M. V. Kolpakova. (2022) Studying the Properties of Composites with a Polyvinylchloride Matrix and Meadow-Grass-Hay Filler. Polymer Science, Series D 15:2, pages 306-310.
Crossref
Crossref
Maryam Jouyandeh, Henri Vahabi, Navid Rabiee, Mohammad Rabiee, Mojtaba Bagherzadeh & Mohammad Reza Saeb. (2021) Green composites in bone tissue engineering. Emergent Materials 5:3, pages 603-620.
Crossref
Crossref
Praveenkumara Jagadeesh, Madhu Puttegowda, Pawinee Boonyasopon, Sanjay Mavinkere Rangappa, Anish Khan & Suchart Siengchin. (2022) Recent developments and challenges in natural fiber composites: A review. Polymer Composites 43:5, pages 2545-2561.
Crossref
Crossref
Muhammad Rizal Muhammad Asyraf, Mohamad Ridzwan Ishak, Mohd Nor Faiz Norrrahim, Abdul Latif Amir, Norizan Mohd Nurazzi, Rushdan Ahmad Ilyas, Mochamad Asrofi, Mazlan Rafidah & Muhammad Rizal Razman. (2022) Potential of Flax Fiber Reinforced Biopolymer Composites for Cross-Arm Application in Transmission Tower: A Review. Fibers and Polymers 23:4, pages 853-877.
Crossref
Crossref
Siti Nadia Mohd Bakhori, Mohamad Zaki Hassan, Noremylia Mohd Bakhori, Khairur Rijal Jamaludin, Faizir Ramlie, Mohd Yusof Md Daud & Sa’ardin Abdul Aziz. (2022) Physical, Mechanical and Perforation Resistance of Natural-Synthetic Fiber Interply Laminate Hybrid Composites. Polymers 14:7, pages 1322.
Crossref
Crossref
Niphaphun Soatthiyanon, Alan Crosky & Michael T. Heitzmann. (2022) Comparison of Experimental and Calculated Tensile Properties of Flax Fibres. Journal of Composites Science 6:4, pages 100.
Crossref
Crossref
Ranjan Chaturvedi, Asokan Pappu, Prashant Tyagi, Ravi Patidar, Anam Khan, Alka Mishra, Manoj Kumar Gupta & Vijay Kumar Thakur. (2022) Next-generation high-performance sustainable hybrid composite materials from silica-rich granite waste particulates and jute textile fibres in epoxy resin. Industrial Crops and Products 177, pages 114527.
Crossref
Crossref
Ashvinder K. Rana, Vijai Kumar Gupta, John Newbold, Dave Roberts, Robert M. Rees, Satheesh Krishnamurthy & Vijay Kumar Thakur. (2022) Sugar beet pulp: Resurgence and trailblazing journey towards a circular bioeconomy. Fuel 312, pages 122953.
Crossref
Crossref
Jyotishkumar Parameswaranpillai, Senthilkumar Krishnasamy, Suchart Siengchin, Sabarish Radoor, Roshny Joy, Jinu Jacob George, Chandrasekar Muthukumar, Senthil Muthu Kumar Thiagamani, Nisa V. Salim & Nishar Hameed. 2022. Natural Fiber‐Reinforced Composites. Natural Fiber‐Reinforced Composites
31
51
.
Artur Camposo Pereira, Sergio Neves Monteiro, Noan Tonini Simonassi, Carlos Mauricio Fontes Vieira, Andreza Menezes Lima, Ulisses Oliveira Costa, Wagner Anacleto Pinheiro, Michelle Souza Oliveira & André Ben-Hur da Silva Figueiredo. (2022) Enhancement of impact toughness using graphene oxide in epoxy composite reinforced with ramie fabric. Composite Structures 282, pages 115023.
Crossref
Crossref
Sanjay Mavinkere Rangappa, Suchart Siengchin, Jyotishkumar Parameswaranpillai, Mohammad Jawaid & Togay Ozbakkaloglu. (2021) Lignocellulosic fiber reinforced composites: Progress, performance, properties, applications, and future perspectives. Polymer Composites 43:2, pages 645-691.
Crossref
Crossref
Siti Norbahiyah Mohamad Badari, Norshahida SariffudinAfifah Ali, Nurul Atikah Hamdan Sharuhil, Farah Diana Mohd DaudHafizah Hanim Mohd Zaki. (2022) Prediction and Optimization on Tribological Behaviour of Kenaf/Carbon Fiber Reinforced Epoxy Matrix Hybrid Composites. Key Engineering Materials 908, pages 3-8.
Crossref
Crossref
Santosh Kumar, Abir Saha & Sumit Bhowmik. (2021) Accelerated weathering effects on mechanical, thermal and viscoelastic properties of kenaf/pineapple biocomposite laminates for load bearing structural applications. Journal of Applied Polymer Science 139:2.
Crossref
Crossref
Phool Singh, Ranganath M. Singari, R.S. Mishra & G.S. Bajwa. (2022) A review on recent development on polymeric hybrid composite and analysis of their enhanced mechanical performance. Materials Today: Proceedings 56, pages 3692-3701.
Crossref
Crossref
Amir Khan & Kuldeep Kumar Saxena. (2022) A review on enhancement of mechanical properties of fiber reinforcement polymer composite under different loading rates. Materials Today: Proceedings 56, pages 2316-2322.
Crossref
Crossref
Prateek & Raju Kumar Gupta. 2022. Advances in Bio-Based Fiber. Advances in Bio-Based Fiber
159
191
.
Lalit Ranakoti & Brijesh Gangil. 2022. Advances in Bio-Based Fiber. Advances in Bio-Based Fiber
21
32
.
J. Manivannan, S. Rajesh, K. Mayandi, I. Siva, I. Sankar & Kestur Gundappa Satyanarayana. 2022. Wool Fiber Reinforced Polymer Composites. Wool Fiber Reinforced Polymer Composites
337
350
.
Fulga Tanasă, Carmen-Alice Teacă, Mărioara Nechifor & Magdalena-Cristina Stanciu. 2022. Surface Treatment Methods of Natural Fibres and their Effects on Biocomposites. Surface Treatment Methods of Natural Fibres and their Effects on Biocomposites
125
146
.
Asim Shahzad, Carmen-Alice Teacă & Fulga Tanasă. 2022. Surface Treatment Methods of Natural Fibres and their Effects on Biocomposites. Surface Treatment Methods of Natural Fibres and their Effects on Biocomposites
1
18
.
Xiaming Feng & Guoqiang Li. 2022. Encyclopedia of Materials: Plastics and Polymers. Encyclopedia of Materials: Plastics and Polymers
320
335
.
Ibrahim M. Alarifi, Majid Khorami, Tarek M. A. A. EL-Bagory & Ramazan Asmatulu. 2022. Handbook of Epoxy/Fiber Composites. Handbook of Epoxy/Fiber Composites
119
146
.
M. Somaiah Chowdary, Gujjala Raghavendra, Shakuntala Ojha & M. S. R. Niranjan Kumar. 2022. Handbook of Epoxy/Fiber Composites. Handbook of Epoxy/Fiber Composites
767
787
.
Ibrahim M. Alarifi, Majid Khorami, Tarek M. A. A. EL-Bagory & Ramazan Asmatulu. 2020. Handbook of Epoxy/Fiber Composites. Handbook of Epoxy/Fiber Composites
1
28
.
M. Somaiah Chowdary, G. Raghavendra, Shakuntala Ojha & M. S. R. Niranjan Kumar. 2020. Handbook of Epoxy/Fiber Composites. Handbook of Epoxy/Fiber Composites
1
21
.
Ajay Chauhan, Vikram Singh & Shiv Kumar. 2022. Proceedings of the International Conference on Industrial and Manufacturing Systems (CIMS-2020). Proceedings of the International Conference on Industrial and Manufacturing Systems (CIMS-2020)
621
632
.
I. Jenish, A. Felix Sahayaraj, M. Appadurai, E. Fantin Irudaya Raj, P. Suresh, T. Raja, Saleh H. Salmen, Saleh Alfarraj & Velu Manikandan. (2021) Fabrication and Experimental Analysis of Treated Snake Grass Fiber Reinforced with Polyester Composite. Advances in Materials Science and Engineering 2021, pages 1-13.
Crossref
Crossref
Taslima Akter & Md. Sahadat Hossain. (2021) Application of plant fibers in environmental friendly composites for developed properties: A review. Cleaner Materials 2, pages 100032.
Crossref
Crossref
Gurukarthik Babu Balachandran, Prince Winston David, Anandha Balaji Alexander, Rajesh Kannan Mariappan, P. Balasundar, B. K. Parrthipan, S. S. Saravanakumar & P. Senthamarai Kannan. (2021) Saccharum barberi grass bagasse ash-based silicone rubber composites for electrical insulator applications. Iranian Polymer Journal 30:12, pages 1285-1296.
Crossref
Crossref
A. Felix Sahayaraj, M. Muthukrishnan, M. Ramesh & L. Rajeshkumar. (2021)
Effect of hybridization on properties of tamarind (
Tamarindus indica
L
.) seed nano‐powder incorporated jute‐hemp fibers reinforced epoxy composites
. Polymer Composites 42:12, pages 6611-6620.
Crossref
Crossref
Roberto Scaffaro, Alberto Di Bartolo & Nadka Tz. Dintcheva. (2021) Matrix and Filler Recycling of Carbon and Glass Fiber-Reinforced Polymer Composites: A Review. Polymers 13:21, pages 3817.
Crossref
Crossref
Aisyah Humaira Alias, Mohd Nurazzi Norizan, Fatimah Athiyah Sabaruddin, Muhammad Rizal Muhammad Asyraf, Mohd Nor Faiz Norrrahim, Ahmad Rushdan Ilyas, Anton M. Kuzmin, Marwah Rayung, Siti Shazra Shazleen, Asmawi Nazrin, Shah Faisal Khan Sherwani, Muhammad Moklis Harussani, Mahamud Siti Nur Atikah, Mohamad Ridzwan Ishak, Salit Mohd Sapuan & Abdan Khalina. (2021) Hybridization of MMT/Lignocellulosic Fiber Reinforced Polymer Nanocomposites for Structural Applications: A Review. Coatings 11:11, pages 1355.
Crossref
Crossref
Rahul Nair, Abhishek Bhattacharya, Papiya Bhowmik & Ravi Kant. (2021) Effect of surface modification on mechanical properties of filature silk waste and nanoclay filler-based polymer matrix composite. Polymers and Polymer Composites 29:9_suppl, pages S696-S706.
Crossref
Crossref
Majka Odalanowska, Andrzej Skrzypczak & Sławomir Borysiak. (2021) Innovative ionic liquids as functional agent for wood-polymer composites. Cellulose 28:16, pages 10589-10608.
Crossref
Crossref
Przemysław Pączkowski, Andrzej Puszka & Barbara Gawdzik. (2021) Effect of Eco-Friendly Peanut Shell Powder on the Chemical Resistance, Physical, Thermal, and Thermomechanical Properties of Unsaturated Polyester Resin Composites. Polymers 13:21, pages 3690.
Crossref
Crossref
Helena Lopes, Susana P. Silva, João Paulo Carvalho & José Machado. (2021) The Influence of Cork and Manufacturing Parameters on the Properties of Cork–Rubber Composites for Vibration Isolation Applications. Sustainability 13:20, pages 11240.
Crossref
Crossref
Sameen Ilyas, Ishrat Sultana, Rabia Nasar, Imran Hanif, S. Hassan M. Jafri, M. Naveed-Ul- Haq & Aamir Razaq. (2021) Tuning of electrical conduction properties of natural fibers and TiO2 based flexible paper composite sheets by electrodeposition of metallic nanolayers. Ceramics International 47:20, pages 29435-29442.
Crossref
Crossref
Sudhakar Behera, Rakesh Kumar Gautam, Sunil Mohan & Arghya Chattopadhyay. (2021) Hemp fiber surface modification: Its effect on mechanical and tribological properties of hemp fiber reinforced epoxy composites. Polymer Composites 42:10, pages 5223-5236.
Crossref
Crossref
E. Jayamani, P.V.S.H. Prashanth, K.H. Soon & Y.C. Wong. (2021) Processing and characterization of chemically modified wood sawdust reinforced (diospyros, dialium) epoxy composites. Materialwissenschaft und Werkstofftechnik 52:10, pages 1048-1056.
Crossref
Crossref
Ana Isabel Quilez‐Molina, Lea Pasquale, Doriana Debellis, Giacomo Tedeschi, Athanassia Athanassiou & Ilker S. Bayer. (2021) Responsive Bio‐Composites from Magnesium Carbonate Filled Polycaprolactone and Curcumin‐Functionalized Cellulose Fibers. Advanced Sustainable Systems 5:10.
Crossref
Crossref
Kumarjyoti Roy, Subhas Chandra Debnath, Aphiwat Pongwisuthiruchte & Pranut Potiyaraj. (2021) Recent advances of natural fibers based green rubber composites: Properties, current status, and future perspectives. Journal of Applied Polymer Science 138:35.
Crossref
Crossref
Hafiz T Ali, Abdulaziz H Alghtani, Bassem F Felemban, Kh Abd El-Aziz, D Saber, Emad M Ahmed, M Megahed & Mohamad Fotouhi. (2021) Multivariable analysis for selection of natural fibers as fillers for a sustainable food packaging industry. Materials Research Express 8:9, pages 095504.
Crossref
Crossref
Ashvinder K. Rana & Vijay Kumar Thakur. (2021) The bright side of cellulosic hibiscus sabdariffa fibres: towards sustainable materials from the macro- to nano-scale. Materials Advances 2:15, pages 4945-4965.
Crossref
Crossref
Raphael H. M. Reis, Fabio C. Garcia Filho, Larissa F. Nunes, Veronica S. Candido, Alisson C. R. Silva & Sergio N. Monteiro. (2021) Impact Resistance of Epoxy Composites Reinforced with Amazon Guaruman Fiber: A Brief Report. Polymers 13:14, pages 2264.
Crossref
Crossref
Rajendran Deepak Joel Johnson, Veerasimman Arumugaprabu, Rajini Nagarajan, Fernando G. Souza & Vigneswaran Shanmugam. 2021. Mechanical and Dynamic Properties of Biocomposites. Mechanical and Dynamic Properties of Biocomposites
235
253
.
Nur Aini Fauziyah, Dewi Nora Fajra, Lila Dina Wulansari & Suminar Pratapa. (2021) Thermomechanical properties of PEG-based composites with micro-quartz fillers. Journal of Physics: Conference Series 1951:1, pages 012018.
Crossref
Crossref
Hari Prashanth P.V.S., Elammaran Jayamani, Kok Heng Soon, Yat Choy Wong, Md. Rezaur Rahman & Muhammad Khusairy Bin Bakri. (2021) Interfacial polarization effects on dielectric properties in flax reinforced polypropylene/strontium titanate composites. Materials Chemistry and Physics 265, pages 124489.
Crossref
Crossref
Jitesh Kumar Singh, Arun Kumar Rout & Kanchan Kumari. (2021) A review on Borassus flabellifer lignocellulose fiber reinforced polymer composites. Carbohydrate Polymers 262, pages 117929.
Crossref
Crossref
Mariana Dias Machado Lopes, Magno de Souza Pádua, Juliana Peixoto Rufino Gazem de Carvalho, Noan Tonini Simonassi, Felipe Perissé Duarte Lopez, Henry A. Colorado & Carlos Maurício Fontes Vieira. (2021) Natural based polyurethane matrix composites reinforced with bamboo fiber waste for use as oriented strand board. Journal of Materials Research and Technology 12, pages 2317-2324.
Crossref
Crossref
Matheus Pereira Ribeiro, Lucas de Mendonça Neuba, Pedro Henrique Poubel Mendonça da Silveira, Fernanda Santos da Luz, André Ben-Hur da Silva Figueiredo, Sergio Neves Monteiro & Mariane Oliveira Moreira. (2021) Mechanical, thermal and ballistic performance of epoxy composites reinforced with Cannabis sativa hemp fabric. Journal of Materials Research and Technology 12, pages 221-233.
Crossref
Crossref
Milad Ahmed, Foeaz Ahmed, Jamil Ahmed, Mst Rubaiat Nazneen Akhand, Kazi Faizul Azim, Md. Abdus Shukur Imran, Syeda Farjana Hoque & Mahmudul Hasan. (2021) In silico identification of conserved miRNAs in the genome of fibre biogenesis crop Corchorus capsularis. Heliyon 7:4, pages e06705.
Crossref
Crossref
Yashas Gowda T. G., Vinod A., Madhu P., Vinod Kushvaha, Sanjay M. R. & Suchart Siengchin. (2021)
A new study on
flax‐basalt‐carbon
fiber reinforced epoxy/
bioepoxy
hybrid composites
. Polymer Composites 42:4, pages 1891-1900.
Crossref
Crossref
Mateus Manabu Abe, Marcia Cristina Branciforti & Michel Brienzo. (2021) Biodegradation of Hemicellulose-Cellulose-Starch-Based Bioplastics and Microbial Polyesters. Recycling 6:1, pages 22.
Crossref
Crossref
M. Muneer Ahmed, H.N. Dhakal, Z.Y. Zhang, A. Barouni & R. Zahari. (2021) Enhancement of impact toughness and damage behaviour of natural fibre reinforced composites and their hybrids through novel improvement techniques: A critical review. Composite Structures 259, pages 113496.
Crossref
Crossref
Kassahun Gashu Melese, Tejas P Naik & Inderdeep Singh. (2020) Adhesive joining of sisal/jute/hybrid composites with drilled holes in lap area. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 235:2, pages 255-264.
Crossref
Crossref
Dominic Monette, Patrick Dumond, Inès Chikhaoui, Paul Nichols & Edward D. Lemaire. (2021) Preliminary Material Evaluation of Flax Fibers for Prosthetic Socket Fabrication. Journal of Biomechanical Engineering 143:2.
Crossref
Crossref
Séverine A. E. Boyer, Jean‐Marc Haudin, Vivian Song, Vincent Bourassier, Patrick Navard & Cécile Barron. (2020) Transcrystallinity in maize tissues/polypropylene composites: First focus of the heterogeneous nucleation and growth stages versus tissue type. POLYMER CRYSTALLIZATION 4:1.
Crossref
Crossref
Timothy K. Mulenga, Albert U. Ude & Chinnasamy Vivekanandhan. (2021) Techniques for Modelling and Optimizing the Mechanical Properties of Natural Fiber Composites: A Review. Fibers 9:1, pages 6.
Crossref
Crossref
A. Díaz-Álvarez, J. Díaz-Álvarez, N. Feito & C. Santiuste. (2021) Drilling of biocomposite materials: Modelling and experimental validation. Simulation Modelling Practice and Theory 106, pages 102203.
Crossref
Crossref
Manoj Sharma, Rajeev Sharma & Shashi Chandra Sharma. (2021) A review on fibres and fillers on improving the mechanical behaviour of fibre reinforced polymer composites. Materials Today: Proceedings 46, pages 6482-6489.
Crossref
Crossref
Amit Kumar Singh, Rajesh P. Verma, Shwetank Avikal & Kuber Singh Mehra. (2021) Mechanical characterization of epoxy composite reinforced with alkali treated walnut shell powder. Materials Today: Proceedings 46, pages 10642-10646.
Crossref
Crossref
J. Manivannan, S. Rajesh, K. Mayandi, N. Rajini & Nadir Ayrilmis. (2021) Investigation of abrasive water jet machining parameters on turkey fibre reinforced polyester composites. Materials Today: Proceedings 45, pages 8000-8005.
Crossref
Crossref
G. Sathyamoorthy, R. Vijay & D. Lenin Singaravelu. (2021) Development and characterization of alkali-treated and untreated Dactyloctenium aegyptium fibers based epoxy composites. Materials Today: Proceedings 39, pages 1215-1220.
Crossref
Crossref
M. Chrispin Das, A. Athijayamani, K. Arun Vasantha Geethan, D. Santhosh & S. Prathap Singh. (2021) Effects of length and content of natural cellulose fiber on the mechanical behaviors of phenol formaldehyde composites. Materials Today: Proceedings 45, pages 516-521.
Crossref
Crossref
Raphaël Coste, Mikhael Soliman, Nicolas B. Bercu, Sylvain Potiron, Karima Lasri, Véronique Aguié-Béghin, Laurene Tetard, Brigitte Chabbert & Michaël Molinari. (2021) Unveiling the impact of embedding resins on the physicochemical traits of wood cell walls with subcellular functional probing. Composites Science and Technology 201, pages 108485.
Crossref
Crossref
A.M. Radzi, S.M. Sapuan, M.R.M. Huzaifah, A.M. Noor Azammi, R.A. Ilyas, R. Nadlene & J.M. Khir. 2021. Roselle. Roselle
271
283
.
Manik Chandra Biswas, Debjyoti Banerjee, Kowshik Saha & Samin Anjum. 2021. Biopolymeric Nanomaterials. Biopolymeric Nanomaterials
203
219
.
M.N. Mohammed, Salah Al-Zubaidi & Siti Humairah Kamarul Bahrain. 2021. Biocomposite and Synthetic Composites for Automotive Applications. Biocomposite and Synthetic Composites for Automotive Applications
347
375
.
Mohammad Azad Alam, S.M. Sapuan, H.H. Ya, P.B. Hussain, Mohammad Azeem & R.A. Ilyas. 2021. Biocomposite and Synthetic Composites for Automotive Applications. Biocomposite and Synthetic Composites for Automotive Applications
1
17
.
Francesca Luzi, Weijun Yang, Piming Ma, Luigi Torre & Debora Puglia. 2021. Lignin-Based Materials for Biomedical Applications. Lignin-Based Materials for Biomedical Applications
291
326
.
Moussaoui Nafissa, Benhamadouche Lamia, Mohammad Jawaid & Mohammad Asim. 2021. Eco-Friendly Adhesives for Wood and Natural Fiber Composites. Eco-Friendly Adhesives for Wood and Natural Fiber Composites
165
180
.
Usha Kiran Sanivada, Gonzalo Mármol & Raul Fangueiro. 2021. Vegetable Fiber Composites and their Technological Applications. Vegetable Fiber Composites and their Technological Applications
379
412
.
Sumit Sharma, Guravtar Singh, Abdullah M. Asiri & Anish Khan. 2021. Vegetable Fiber Composites and their Technological Applications. Vegetable Fiber Composites and their Technological Applications
351
377
.
F. Tanasă, C. A. Teacă, M. Nechifor & M. Zănoagă. 2021. Bioplastics for Sustainable Development. Bioplastics for Sustainable Development
467
513
.
Tamil Moli Loganathan, Ibrahim Burhan, Saifuddin Kumar Bin Abdullah, Mohamed Thariq Hameed Sultan, Salvinder Singh A/L Karam Singh & Umaradli Amran. 2021. Phenolic Polymers Based Composite Materials. Phenolic Polymers Based Composite Materials
169
190
.
Md Rezaur Rahman, Muhammad Adamu, Muhammad Khusairy Bin Bakri & Siti Noor Linda bt Taib. 2021. Bamboo Polymer Nanocomposites. Bamboo Polymer Nanocomposites
21
37
.
Displaying 200 of 572 citing articles. Use the download link below to view the full list of citing articles.
Download full citations list