Advanced search
Publication Cover
Tribology Transactions Volume 50, 2007 - Issue 3
Submit an article Journal homepage
878
Views
93
CrossRef citations to date
0
Altmetric
Original Articles

Optimization of Partially Textured Parallel Thrust Bearings with Square-Shaped Micro-Dimples

RAMIN RAHMANI Faculty of Science and Technology, Anglia Ruskin University Victoria Road South, Chelmsford, CM1 1LL, UK
,
AYOUB SHIRVANI Faculty of Science and Technology, Anglia Ruskin University Victoria Road South, Chelmsford, CM1 1LL, UK
&
HASSAN SHIRVANI Faculty of Science and Technology, Anglia Ruskin University Victoria Road South, Chelmsford, CM1 1LL, UK
Pages 401-406 | Published online: 25 Mar 2008

Citations (93)

Keep up to date with the latest research on this topic with citation updates for this article.

Subscribe to citation updates

Read on this site (10)

Tongyang Li, Xiqun Lu, Xuan Ma, Hanzhang Xu, Bowen Jiao & Dequan Zou. (2019) Numerical and Experimental Analysis of the Honing Texture on the Lubrication Performance of Piston Ring–Cylinder Liner Tribosystem. Tribology Transactions 62:6, pages 991-1006.
Read now
Chunxing Gu, Xianghui Meng & Youbai Xie. (2017) A Universal Model for Both Flooded and Starved Lubrication Regimes and Its Application in Ring–Liner System. Tribology Transactions 60:3, pages 506-515.
Read now
Cong Shen & M. M. Khonsari. (2016) Texture Shape Optimization for Seal-Like Parallel Surfaces: Theory and Experiment. Tribology Transactions 59:4, pages 698-706.
Read now
S. Susilowati, M. Tauviqirrahman, J. Jamari & A. P. Bayuseno. (2016) Numerical investigation of the combined effects of slip and texture on tribological performance of bearing. Tribology - Materials, Surfaces & Interfaces 10:2, pages 86-89.
Read now
D. M. Razak, S. Syahrullail, N. Sapawe, Y. Azli & N. Nuraliza. (2016) A new tribological approach on metal cup with optimized pits model using spark discharge machine. Particulate Science and Technology 34:2, pages 209-216.
Read now
Mohammad Tauviqirrahman, Muchammad, Jamari & DikJ. Schipper. (2014) Numerical Study of the Load-Carrying Capacity of Lubricated Parallel Sliding Textured Surfaces including Wall Slip. Tribology Transactions 57:1, pages 134-145.
Read now
A.R. Gherca, P. Maspeyrot, M. Hajjam & A. Fatu. (2013) Influence of Texture Geometry on the Hydrodynamic Performances of Parallel Bearings. Tribology Transactions 56:3, pages 321-332.
Read now
Yonghong Fu, Jinghu Ji & Qinsheng Bi. (2012) The Influence of Partially Textured Slider with Oriented Parabolic Grooves on the Behavior of Hydrodynamic Lubrication. Tribology Transactions 55:2, pages 210-217.
Read now
Alexey Shinkarenko, Yuri Kligerman & Izhak Etsion. (2010) Theoretical Analysis of Surface-Textured Elastomer Sleeve in Lubricated Rotary Sliding. Tribology Transactions 53:3, pages 376-385.
Read now
KennethK. Chao & CostandyS. Saba. (2008) Pretreatment of Steel Racetracks by using a Sand-Blasting Technique with a Special Emphasis on Si3N4 Powder—Part One. Tribology Transactions 52:1, pages 96-105.
Read now

Articles from other publishers (83)

Youcef Amine Masmoudi, Amine Brick Chaouche & Ahcene Mokhtari. (2023) Effect of rectangular rough dimples of textured surface on tribological behavior of a hydrodynamic journal bearing. Tribology International 189, pages 108945.
Crossref
Young Chan Yoon & Taek Sung Lee. (2023) Heat Reduction Characteristics of Wear Ring with Umbrella-type Micro-dimple. Journal of the Korean Society for Precision Engineering 40:8, pages 607-615.
Crossref
Seyed Jalaleddin Mousavirad, Ramin Rahmani & Nader Dolatabadi. (2023) A transfer learning based artificial neural network in geometrical design of textured surfaces for tribological applications. Surface Topography: Metrology and Properties 11:2, pages 025001.
Crossref
Ehsan Fatourehchi, Hamed Shahmohamadi, Ramin Rahmani, Homer Rahnejat, Mark Johnson & Ian Wilson. (2022) Tribology of dust‐stop seals of mixing machines. Lubrication Science 35:3, pages 193-206.
Crossref
Xiaodong Yu, Guangqiang Shi, Feihu Zhao, Yanan Feng & Weicheng Gao. (2023) Comparative study on single-objective optimization and multi-objective optimization of convex textured friction couple performance. Surface Topography: Metrology and Properties 11:1, pages 015017.
Crossref
Deepak Byotra & Sanjay Sharma. 2023. Recent Advances in Materials. Recent Advances in Materials 247 263 .
Max Marian, Andreas Almqvist, Andreas Rosenkranz & Michel Fillon. (2022) Numerical micro-texture optimization for lubricated contacts—A critical discussion. Friction 10:11, pages 1772-1809.
Crossref
Yu Geng & Wei Chen. (2022) Multiscale method of modelling surface texture with mass-conserving cavitation model. Tribology International 173, pages 107663.
Crossref
Yulong Li, Dongning Sun, Yongyong He & Jianbin Luo. (2022) Coupled Optimization of Groove Texture for Parallel Ring–Ring Friction Pairs: Theory and Experiments. Tribology Letters 70:2.
Crossref
Slawomir Wos, Waldemar Koszela, Andrzej Dzierwa & Pawel Pawlus. (2021) Effect of triangular oil pockets on friction reduction. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 236:5, pages 823-836.
Crossref
JC Atwal & RK Pandey. (2021) Influence of new surface micro-structures on the performance behaviours of fluid film tilting pad thrust bearings. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 236:6, pages 3111-3134.
Crossref
Carl Magnus, Idris T. Gulenc & W.M. Rainforth. (2022) Ambient dry sliding friction and wear behaviour of laser surface textured (LST) Ti3SiC2 MAX phase composite against hardened steel and alumina. Wear 490-491, pages 204184.
Crossref
Tianyang Chen, Jinghu Ji, Yonghong Fu, Penglin Tian, Jiapeng Zhou & Xiping Yang. (2021) Tribological analysis of picosecond laser partially textured thrust bearings with circular grooves machined: Theory and experiment. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 236:1, pages 105-122.
Crossref
Peng Li, Fang Zeng, Sen Xiao, Dong Zhen, Hao Zhang & Zhanqun Shi. (2021) Effects of Texture Bottom Profile on Static and Dynamic Characteristics of Journal Bearings. Shock and Vibration 2021, pages 1-25.
Crossref
Xiaohan Zhang & Robert L. Jackson. (2021) A mixed lubrication analysis of a flat‐land thrust bearing with a surface optimisation method. Lubrication Science 33:6, pages 335-346.
Crossref
Hesheng Tang, Yan Ren, Jiawei Xiang & Kumar Anil. (2020) Evaluation and optimization of axial piston pump textured slipper bearings with spherical dimples based on hybrid genetic algorithm. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 235:8, pages 1719-1741.
Crossref
Venkateswara Babu Peddakondigalla, Kiran Kumar Veeranapu, Ismail Syed & Vasavi Boggarapu. (2021) Hydrodynamic Performance of Positive Surface Textured Patterns under Mixed Lubrication. IOP Conference Series: Materials Science and Engineering 1112:1, pages 012008.
Crossref
Zhongliang Xie, Yun Zhang, Jinzhu Zhou & Weidong Zhu. (2021) Theoretical and experimental research on the micro interface lubrication regime of water lubricated bearing. Mechanical Systems and Signal Processing 151, pages 107422.
Crossref
Quentin Allen & Bart Raeymaekers. (2021) The Effect of Texture Floor Profile on the Lubricant Film Thickness in a Textured Hard-On-Soft Bearing With Relevance to Prosthetic Hip Implants. Journal of Tribology 143:2.
Crossref
Dillip K Panigrahi & Mihir Sarangi. (2020) Tribological performance of positive deterministic textured surfaces in parallel sliding lubricated contacts: Effect of texture size and height. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 234:12, pages 1908-1925.
Crossref
Paolo Casoli, Fabio Scolari, Massimo Rundo, Antonio Lettini & Manuel Rigosi. (2020) CFD Analyses of Textured Surfaces for Tribological Improvements in Hydraulic Pumps. Energies 13:21, pages 5799.
Crossref
M.-P. Noutary, N. Biboulet & A.A. Lubrecht. (2020) Dimple influence on load carrying capacity of parallel surfaces. Tribology International 149, pages 105452.
Crossref
Mohammad Arif, Dinesh Kumar Shukla, Saurabh Kango & Nitin Sharma. (2020) Implication of Surface Texture and Slip on Hydrodynamic Fluid Film Bearings: A Comprehensive Survey. Tribology Online 15:4, pages 265-282.
Crossref
A. Codrignani, D. Savio, L. Pastewka, B. Frohnapfel & R. van Ostayen. (2020) Optimization of surface textures in hydrodynamic lubrication through the adjoint method. Tribology International 148, pages 106352.
Crossref
Michail Chalkiopoulos, Anastassios Charitopoulos, Michel Fillon & Christos I. Papadopoulos. (2020) Effects of thermal and mechanical deformations on textured thrust bearings optimally designed by a THD calculation method. Tribology International 148, pages 106303.
Crossref
Slawomir Wos, Waldemar Koszela & Pawel Pawlus. (2020) Comparing tribological effects of various chevron-based surface textures under lubricated unidirectional sliding. Tribology International 146, pages 106205.
Crossref
Huichao Gao & Xinyuan Chen. (2020) Effect of surface texturing on hydrodynamic lubrication at various temperatures. AIP Advances 10:5.
Crossref
Xiuying Wang, Michael Khonsari, Siyuan Li, Qingwen Dai & Xiaolei Wang. (2019) Experimental verification of textured mechanical seal designed using multi-objective optimization. Industrial Lubrication and Tribology 71:6, pages 766-771.
Crossref
Abhishek KumarSatish C. Sharma. (2019) Optimal Parameters of Grooved Conical Hybrid Journal Bearing With Shear Thinning and Piezo-viscous Lubricant Behavior. Journal of Tribology 141:7.
Crossref
Gen Fu & Alexandrina Untaroiu. (2018) The Influence of Surface Patterning on the Thermal Properties of Textured Thrust Bearings. Journal of Tribology 140:6.
Crossref
A. Senatore & T. V. V. L. N. Rao. (2018) Partial Slip Texture Slider and Journal Bearing Lubricated With Newtonian Fluids: A Review. Journal of Tribology 140:4.
Crossref
A. Codrignani, B. Frohnapfel, F. Magagnato, P. Schreiber, J. Schneider & P. Gumbsch. (2018) Numerical and experimental investigation of texture shape and position in the macroscopic contact. Tribology International 122, pages 46-57.
Crossref
Dipankar Choudhury, David Rebenda, Shinya Sasaki, Pavel Hekrle, Martin Vrbka & Min Zou. (2018) Enhanced lubricant film formation through micro-dimpled hard-on-hard artificial hip joint: An in-situ observation of dimple shape effects. Journal of the Mechanical Behavior of Biomedical Materials 81, pages 120-129.
Crossref
R. Rahmani & H. Rahnejat. (2018) Enhanced performance of optimised partially textured load bearing surfaces. Tribology International 117, pages 272-282.
Crossref
Bojan Podgornik. 2017. Friction, Lubrication, and Wear Technology. Friction, Lubrication, and Wear Technology 706 722 .
Gen Fu & Alexandrina Untaroiu. (2017) An Optimum Design Approach for Textured Thrust Bearing With Elliptical-Shape Dimples Using Computational Fluid Dynamics and Design of Experiments Including Cavitation. Journal of Engineering for Gas Turbines and Power 139:9.
Crossref
Dimitrios G. Fouflias, Anastassios G. Charitopoulos, Christos I. Papadopoulos & Lambros Kaiktsis. (2017) Thermohydrodynamic analysis and tribological optimization of a curved pocket thrust bearing. Tribology International 110, pages 291-306.
Crossref
Shipra Aggarwal & R. K. Pandey. (2017) Frictional and load-carrying behaviours of micro-textured sector shape pad thrust bearing incorporating the cavitation and thermal effects. Lubrication Science 29:4, pages 255-277.
Crossref
Ali Usman & Cheol Woo Park. (2016) Modeling and simulation of frictional energy loss in mixed lubrication of a textured piston compression ring during warm-up of spark ignition engine. International Journal of Engine Research 18:4, pages 293-307.
Crossref
W. D. Lestari, J. Jamari & A. P. Bayuseno. The von Mises stress distribution on the surface of UHMWPE with texture-shaped variation in the presence of normal load and dry sliding contact. The von Mises stress distribution on the surface of UHMWPE with texture-shaped variation in the presence of normal load and dry sliding contact.
Ali Usman & Cheol Woo Park. (2017) Numerical investigation of tribological performance in mixed lubrication of textured piston ring-liner conjunction with a non-circular cylinder bore. Tribology International 105, pages 148-157.
Crossref
D. Trauth, J. Stanke, A. Shirobokov, P. Mattfeld & F. Klocke. (2016) Analysis of the fluid pressure, load capacity, and coefficient of friction of an elliptic machine hammer peened surface structure in hydrodynamic lubrication. Production Engineering 10:6, pages 539-550.
Crossref
Ali Usman & Cheol Woo Park. (2016) Optimizing the tribological performance of textured piston ring–liner contact for reduced frictional losses in SI engine: Warm operating conditions. Tribology International 99, pages 224-236.
Crossref
Yan Lu & Zuomin Liu. (2015) Behavior of micro-cycle lubrication generated by a grid-textured surface. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 230:5, pages 600-610.
Crossref
Daniel Gropper, Ling Wang & Terry J. Harvey. (2016) Hydrodynamic lubrication of textured surfaces: A review of modeling techniques and key findings. Tribology International 94, pages 509-529.
Crossref
Nacer Tala-Ighil & Michel Fillon. (2015) A numerical investigation of both thermal and texturing surface effects on the journal bearings static characteristics. Tribology International 90, pages 228-239.
Crossref
Hui Zhang, Guangneng Dong, Meng Hua, Feifei Guo & Kwai Sang Chin. (2015) Parametric design of surface textures on journal bearing. Industrial Lubrication and Tribology 67:4, pages 359-369.
Crossref
N Morris, M Leighton, M De la Cruz, R Rahmani, H Rahnejat & S Howell-Smith. (2014) Combined numerical and experimental investigation of the micro-hydrodynamics of chevron-based textured patterns influencing conjunctional friction of sliding contacts. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 229:4, pages 316-335.
Crossref
Dimitrios G Fouflias, Anastassios G Charitopoulos, Christos I Papadopoulos, Lambros Kaiktsis & Michel Fillon. (2014) Performance comparison between textured, pocket, and tapered-land sector-pad thrust bearings using computational fluid dynamics thermohydrodynamic analysis. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 229:4, pages 376-397.
Crossref
A Gherca, A Fatu, M Hajjam & P Maspeyrot. (2014) Effects of surface texturing in steady-state and transient flow conditions: Two-dimensional numerical simulation using a mass-conserving cavitation model. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 229:4, pages 505-522.
Crossref
Mingfeng Qiu & Bart Raeymaekers. (2014) The load-carrying capacity and friction coefficient of incompressible textured parallel slider bearings with surface roughness inside the texture features. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 229:4, pages 547-556.
Crossref
Fadi Ali, Ivan Křupka & Martin Hartl. (2014) Reducing the friction of lubricated nonconformal point contacts by transverse shallow micro-grooves. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 229:4, pages 420-428.
Crossref
Nacer Tala-Ighil & Michel Fillon. (2015) Surface texturing effect comparative analysis in the hydrodynamic journal bearings. Mechanics & Industry 16:3, pages 302.
Crossref
H. Zhang, D. Y. Zhang, M. Hua, G. N. Dong & K. S. Chin. (2014) A Study on the Tribological Behavior of Surface Texturing on Babbitt Alloy under Mixed or Starved Lubrication. Tribology Letters 56:2, pages 305-315.
Crossref
Yushan Lu, Yueming Liu, Jun Wang & Hongpeng Liu. (2014) Experimental Investigation into Friction Performance of Dimples Journal Bearing with Phyllotactic Pattern. Tribology Letters 55:2, pages 271-278.
Crossref
Jinghu Ji, Yonghong Fu & Qinsheng Bi. (2014) The influence of partially textured slider with orientation ellipse dimples on the behavior of hydrodynamic lubrication. Industrial Lubrication and Tribology 66:2, pages 161-167.
Crossref
A. Charitopoulos, D. Fouflias, C.I. Papadopoulos, L. Kaiktsis & M. Fillon. (2014) Thermohydrodynamic analysis of a textured sector-pad thrust bearing: effects on mechanical deformations. Mechanics & Industry 15:5, pages 403-411.
Crossref
. 2014. Engineering Tribology. Engineering Tribology 105 210 .
YUNCAI ZHAO & LEI HAN. (2013) CFD-BASED RESEARCH ON THE LOAD-BEARING CAPACITY OF ASYMMETRIC TEXTURE WITH DIFFERENT REYNOLDS NUMBER. Surface Review and Letters 20:05, pages 1350043.
Crossref
Mohammad Tauviqirrahman, Rifky Ismail, J. Jamari & Dirk J. Schipper. (2013) Combined effect of texturing and boundary slippage in lubricated sliding contacts. Tribology International 66, pages 274-281.
Crossref
Zhaoqiang Wang, Linyi Gu & Lin Li. (2013) Experimental studies on the overall efficiency performance of axial piston motor with a laser surface textured valve plate. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 227:7, pages 1049-1056.
Crossref
Tomasz Woloszynski, Pawel Podsiadlo & Gwidon W. Stachowiak. (2013) Evaluation of Discretisation and Integration Methods for the Analysis of Hydrodynamic Bearings With and Without Surface Texturing. Tribology Letters 51:1, pages 25-47.
Crossref
N Morris, R Rahmani, H Rahnejat, PD King & B Fitzsimons. (2012) The influence of piston ring geometry and topography on friction. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 227:2, pages 141-153.
Crossref
M. Tauviqirrahman, R. Ismail, J. Jamari & D. J. Schipper. (2012) A study of surface texturing and boundary slip on improving the load support of lubricated parallel sliding contacts. Acta Mechanica 224:2, pages 365-381.
Crossref
Agata Guzek, Pawel Podsiadlo & Gwidon W. Stachowiak. (2013) Optimization of Textured Surface in 2D Parallel Bearings Governed by the Reynolds Equation Including Cavitation and Temperature. Tribology Online 8:1, pages 7-21.
Crossref
Dipankar Choudhury, Robert Walker, Ayoub Shirvani & Rajshree Mootanah. (2013) The Influence of Honed Surfaces on Metal-on-Metal Hip Joints. Tribology Online 8:3, pages 195-202.
Crossref
Mingfeng Qiu, Adis Delic & Bart Raeymaekers. (2012) The Effect of Texture Shape on the Load-Carrying Capacity of Gas-Lubricated Parallel Slider Bearings. Tribology Letters 48:3, pages 315-327.
Crossref
B. Podgornik & M. Sedlacek. (2012) Performance, Characterization and Design of Textured Surfaces. Journal of Tribology 134:4.
Crossref
B. Podgornik, L. M. Vilhena, M. Sedlaček, Z. Rek & I. Žun. (2012) Effectiveness and design of surface texturing for different lubrication regimes. Meccanica 47:7, pages 1613-1622.
Crossref
S. Kango, D. Singh & R. K. Sharma. (2011) Numerical investigation on the influence of surface texture on the performance of hydrodynamic journal bearing. Meccanica 47:2, pages 469-482.
Crossref
Y. Kligerman & A. Shinkarenko. (2011) The effect of tapered edges on lubrication regimes in surface-textured elastomer seals. Tribology International 44:12, pages 2059-2066.
Crossref
M. Wolski, P. Podsiadlo & G.W. Stachowiak. (2011) Effects of information loss in texture details due to the PIFS encoding on load and friction in hydrodynamic bearings. Tribology International 44:12, pages 2002-2012.
Crossref
Chenbo Ma & Hua Zhu. (2011) An optimum design model for textured surface with elliptical-shape dimples under hydrodynamic lubrication. Tribology International 44:9, pages 987-995.
Crossref
Nacer Tala-Ighil, Michel Fillon & Patrick Maspeyrot. (2011) Effect of textured area on the performances of a hydrodynamic journal bearing. Tribology International 44:3, pages 211-219.
Crossref
Christos I. Papadopoulos, Pantelis G. Nikolakopoulos & Lambros Kaiktsis. (2011) Evolutionary Optimization of Micro-Thrust Bearings With Periodic Partial Trapezoidal Surface Texturing. Journal of Engineering for Gas Turbines and Power 133:1.
Crossref
M B Dobrica, M Fillon, M D Pascovici & T Cicone. (2010) Optimizing surface texture for hydrodynamic lubricated contacts using a mass-conserving numerical approach. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 224:8, pages 737-750.
Crossref
V G Marian, A Predescu & M D Pascovici. (2009) Theoretical analysis of an infinitely wide rigid cylinder rotating over a grooved surface in hydrodynamic conditions. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 224:8, pages 757-763.
Crossref
R. Rahmani, I. Mirzaee, A. Shirvani & H. Shirvani. (2010) An analytical approach for analysis and optimisation of slider bearings with infinite width parallel textures. Tribology International 43:8, pages 1551-1565.
Crossref
Agata Guzek, Pawel Podsiadlo & Gwidon W. Stachowiak. (2010) A Unified Computational Approach to the Optimization of Surface Textures:One Dimensional Hydrodynamic Bearings. Tribology Online 5:3, pages 150-160.
Crossref
R. Rahmani, A. Shirvani & H. Shirvani. 2010. Tribology and Dynamics of Engine and Powertrain. Tribology and Dynamics of Engine and Powertrain 470 517 .
A. Shinkarenko, Y. Kligerman & I. Etsion. (2009) The Effect of Elastomer Surface Texturing in Soft Elasto-Hydrodynamic Lubrication. Tribology Letters 36:2, pages 95-103.
Crossref
M D Pascovici, T Cicone, M Fillon & M B Dobrica. (2008) Analytical investigation of a partially textured parallel slider. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 223:2, pages 151-158.
Crossref
A. Shinkarenko, Y. Kligerman & I. Etsion. (2009) The effect of surface texturing in soft elasto-hydrodynamic lubrication. Tribology International 42:2, pages 284-292.
Crossref

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.