1,031
Views
59
CrossRef citations to date
0
Altmetric
Original Articles

The Effect of a Friction Modifier Additive on Micropitting

, , , , &
Pages 526-533 | Received 13 Oct 2008, Accepted 10 Jan 2009, Published online: 15 Feb 2011

Keep up to date with the latest research on this topic with citation updates for this article.

Read on this site (4)

Mao Ueda, Hugh Spikes & Amir Kadiric. (2022) Influence of Black Oxide Coating on Micropitting and ZDDP Tribofilm Formation. Tribology Transactions 65:2, pages 242-259.
Read now
Meghan K. Miller, Hassan Khalid, Paul W. Michael, Jeffrey M. Guevremont, Kenneth J. Garelick, Grant W. Pollard, Aaron J. Whitworth & Mark T. Devlin. (2014) An Investigation of Hydraulic Motor Efficiency and Tribological Surface Properties. Tribology Transactions 57:4, pages 622-630.
Read now
V. Brizmer, H.R. Pasaribu & G.E. Morales-Espejel. (2013) Micropitting Performance of Oil Additives in Lubricated Rolling Contacts. Tribology Transactions 56:5, pages 739-748.
Read now
G.E. Morales-Espejel & V. Brizmer. (2011) Micropitting Modelling in Rolling–Sliding Contacts: Application to Rolling Bearings. Tribology Transactions 54:4, pages 625-643.
Read now

Articles from other publishers (55)

Mao Ueda, Janet S.S. Wong & Hugh Spikes. (2023) Influence of dumbbell base oil blends on micropitting. Tribology International 185, pages 108578.
Crossref
B. Wainwright, H. Takeuchi, T. Makino & A. Kadiric. (2022) The influence of Λ ratio and surface roughness on the initiation and progression of micropitting damage. Wear 508-509, pages 204473.
Crossref
Guillermo Enrique Morales-Espejel, Victor Brizmer & Ralph Meeuwenoord. (2022) Computational Methods for Detection of Microgeometry Changes in Tribological Surfaces. Tribology Online 17:3, pages 196-206.
Crossref
Wenjing Hu & Jiusheng Li. (2022) Effect of Molecular Weight on Tribological Properties of Polyether Amine Derivatives under Different Contact Modes. Lubricants 10:6, pages 105.
Crossref
I. Lahouij, B. Gould, N. Demas, A. Greco, Z. Chen, G. D. Cooper, A. Jackson & Robert W. Carpick. (2022) Inhibition of Micro-pitting by Tribofilm-Forming ZrO2 Nanocrystal Lubricant Additives: A Micro-pitting Rig and Transmission Electron Microscope Study. Tribology Letters 70:1.
Crossref
Mao Ueda, Benjamin Wainwright, Hugh Spikes & Amir Kadiric. (2022) The effect of friction on micropitting. Wear 488-489, pages 204130.
Crossref
Yashkumar Gandhi, Ninad Pawar, Nanasaheb Zoal & Gurunathan Ramnathan. (2021) Investigation of Valve Tip End Wear Mechanism of a Four-Cylinder Automotive Engine Under High-Speed Application. Journal of Failure Analysis and Prevention 21:6, pages 2098-2107.
Crossref
Reza Bayat & Arto Lehtovaara. (2021) Tribofilm Formation of Simulated Gear Contact Along the Line of Action. Tribology Letters 69:4.
Crossref
Anthony Chukwunonso Opia, Abdul Hamid Mohd Kameil, Samion Syahrullail, Stanley Chinedu Mamah, Mazali Izhari Izmi, Che Daud Zul Hilmi, Abdelgade Agilah Saleh, Abu Bakar Abd Rahim & Charles A. N Johnson. (2021) Effect of Concentration on the Tribological behavior of Cyclic Heated Formulated Organic Carbon Nanotubes in Base Lubricant under Boundary Conditions. Tribology Online 16:4, pages 199-209.
Crossref
Shuto Takayasu, Osamu Umezawa, Keisuke Yari, Kazuya Hashimoto & Taichi Fuchigami. (2021) Spectroscopy analyses of tribofilm and surface microcracks in carburized SCM420 steel under high-pressure rolling contact fatigue. Wear 477, pages 203807.
Crossref
Wei Li & Liantao Lu. (2021) The influence of surface roughness and viscosity on micropitting damage. Industrial Lubrication and Tribology 73:3, pages 531-535.
Crossref
Hui Cen, Dan Bai, Yanpu Chao, Yaohui Li & Ruihua Li. (2021) Effect of Relative Humidity on Micropitting Behavior in Rolling–Sliding Contacts with Zinc Dialkyldithiophosphate-Containing Lubricants. Journal of Materials Engineering and Performance 30:4, pages 2781-2797.
Crossref
T. Touret, C. Changenet, F. Ville & J. Cavoret. (2021) Experimental investigation on the effect of micropitting on friction - Part 2: Analysis of power losses evolution on a geared system. Tribology International 153, pages 106551.
Crossref
Azhaarudeen Anifa Mohamed Faruck, Chia-Jui Hsu, Nicole Doerr, Michael Weigand & Carsten Gachot. (2020) How lubricant formulations and properties influence the performance of rotorcraft transmissions under loss of lubrication conditions. Tribology International 151, pages 106390.
Crossref
Aleks Vrček, Tobias Hultqvist, Tomas Johannesson, Pär Marklund & Roland Larsson. (2020) Micro-pitting and wear characterization for different rolling bearing steels: Effect of hardness and heat treatments. Wear 458-459, pages 203404.
Crossref
T. Touret, C. Changenet, F. Ville, J. Cavoret & V. Abousleiman. (2020) Experimental investigations on the effect of micropitting on friction – Part 1. Tribology International 149, pages 105678.
Crossref
Takuya Ohno, René Greschert, Christoph Löpenhaus & Christian Brecher. (2020) The Influence of Material Roughness, Hardness and Lubricant Additives on Micropitting Behaviour in Rolling-Sliding Contacts. Tribology Online 15:2, pages 98-104.
Crossref
Heli Liu, Huaiju Liu, Caichao Zhu & Robert G. Parker. (2020) Effects of lubrication on gear performance: A review. Mechanism and Machine Theory 145, pages 103701.
Crossref
Franco Concli, Carlo Gorla, Francesco Rosa & Edoardo Conrado. (2019) Effect of the static pressure on the power dissipation of gearboxes. Lubrication Science 31:8, pages 347-355.
Crossref
Siavash Soltanahmadi, Thibaut CharpentierIleana Nedelcu, Vishal KhetanArdian MorinaHelen M. FreemanAndrew P. BrownRik BrydsonMarcel C. P. van Eijk & Anne Neville. (2019) Surface Fatigue Behavior of a WC/aC:H Thin-Film and the Tribochemical Impact of Zinc Dialkyldithiophosphate. ACS Applied Materials & Interfaces 11:44, pages 41676-41687.
Crossref
Mao Ueda, Hugh Spikes & Amir Kadiric. (2019) In-situ observations of the effect of the ZDDP tribofilm growth on micropitting. Tribology International 138, pages 342-352.
Crossref
Aleks Vrček, Tobias Hultqvist, Yannick Baubet, Pär Marklund & Roland Larsson. (2019) Micro-pitting Damage of Bearing Steel Surfaces under Mixed Lubrication Conditions: Effects of Roughness, Hardness and ZDDP Additive. Tribology International 138, pages 239-249.
Crossref
Naoya Hasegawa, Takumi Fujita, Michimasa Uchidate, Masayoshi Abo & Hiroshi Kinoshita. (2019) Estimation Method of Micropitting Life from <i>S</i>-<i>N</i> Curve Established by Residual Stress Measurements and Numerical Contact Analysis. Tribology Online 14:3, pages 131-142.
Crossref
N Muthunilavan, G Rajaram, Deepak Joshi & A Vigneshswaminathan. (2019) Self-repairing effect of few Si3N4 balls used as rolling elements to enhance the performance of bearings operating under contaminated lubrication conditions. Tribology International 134, pages 281-295.
Crossref
Pawel Rycerz & Amir Kadiric. (2019) The Influence of Slide–Roll Ratio on the Extent of Micropitting Damage in Rolling–Sliding Contacts Pertinent to Gear Applications. Tribology Letters 67:2.
Crossref
Hui Cen, Ardian Morina & Anne Neville. (2019) Effect of base oil polarity on the micropitting behaviour in rolling‐sliding contacts. Lubrication Science 31:4, pages 113-126.
Crossref
Aleks Vrček, Tobias Hultqvist, Yannick Baubet, Marcus Björling, Pär Marklund & Roland Larsson. (2019) Micro-Pitting and Wear Assessment of PAO vs Mineral-Based Engine Oil Operating under Mixed Lubrication Conditions: Effects of Lambda, Roughness Lay and Sliding Direction. Lubricants 7:5, pages 42.
Crossref
C. Sequeira, A. Pacheco, P. Galego & E. Gorbeña. (2019) Analysis of the efficiency of wind turbine gearboxes using the temperature variable. Renewable Energy 135, pages 465-472.
Crossref
Francesco Manieri, Kenred Stadler, Guillermo E. Morales-Espejel & Amir Kadiric. (2019) The origins of white etching cracks and their significance to rolling bearing failures. International Journal of Fatigue 120, pages 107-133.
Crossref
Huaiju Liu, Heli Liu, Caichao Zhu & Ye Zhou. (2019) A Review on Micropitting Studies of Steel Gears. Coatings 9:1, pages 42.
Crossref
A. Vrcek, T. Hultqvist, Y. Baubet, M. Björling, P. Marklund & R. Larsson. (2019) Micro-pitting and wear assessment of engine oils operating under boundary lubrication conditions. Tribology International 129, pages 338-346.
Crossref
Steffen Brinckmann, Andreas Stratmann, Gerhard Dehm & Georg Jacobs. (2019) Tribolayer formation during macro- and microscale cyclic contact. Tribology International 129, pages 436-441.
Crossref
C. Soffritti, M. Merlin, R. Vazquez, A. Fortini & G.L. Garagnani. (2018) Failure analysis of worn valve train components of a four-cylinder diesel engine. Engineering Failure Analysis 92, pages 528-538.
Crossref
Sougata Roy, Derek White & Sriram Sundararajan. (2018) Correlation between evolution of surface roughness parameters and micropitting of carburized steel under boundary lubrication condition. Surface and Coatings Technology 350, pages 445-452.
Crossref
Hui Cen, Ardian Morina & Anne Neville. (2018) Effect of slide to roll ratio on the micropitting behaviour in rolling-sliding contacts lubricated with ZDDP-containing lubricants. Tribology International 122, pages 210-217.
Crossref
Yasir Al-Jeboori, Shahriar Kosarieh, Ardian Morina & Anne Neville. (2018) Investigation of pure sliding and sliding/rolling contacts in a DLC/Cast iron system when lubricated in oils containing MoDTC-Type friction modifier. Tribology International 122, pages 23-37.
Crossref
G.E. Morales-Espejel, P. Rycerz & A. Kadiric. (2018) Prediction of micropitting damage in gear teeth contacts considering the concurrent effects of surface fatigue and mild wear. Wear 398-399, pages 99-115.
Crossref
Erfan Abedi Esfahani, Ardian Morina, Bo Han, Ileana Nedelcu, Marcel C.P. van Eijk & Anne Neville. (2017) Development of a novel in-situ technique for hydrogen uptake evaluation from a lubricated tribocontact. Tribology International 113, pages 433-442.
Crossref
Siavash Soltanahmadi, Ardian Morina, Marcel C.P. van Eijk, Ileana Nedelcu & Anne Neville. (2017) Experimental observation of zinc dialkyl dithiophosphate (ZDDP)-induced iron sulphide formation. Applied Surface Science 414, pages 41-51.
Crossref
Benoit L’Hostis, Clotilde Minfray, Marion Frégonèse, Catherine Verdu, Benoit Ter-Ovanessian, Béatrice Vacher, Thierry Le Mogne, Frédéric Jarnias & Alder Da-Costa D’Ambros. (2017) Influence of lubricant formulation on rolling contact fatigue of gears – interaction of lubricant additives with fatigue cracks. Wear 382-383, pages 113-122.
Crossref
V. Brizmer, C. Matta, I. Nedelcu & G. E. Morales-Espejel. (2017) The Influence of Tribolayer Formation on Tribological Performance of Rolling/Sliding Contacts. Tribology Letters 65:2.
Crossref
Siavash Soltanahmadi, Ardian Morina, Marcel C P van Eijk, Ileana Nedelcu & Anne Neville. (2016) Investigation of the effect of a diamine-based friction modifier on micropitting and the properties of tribofilms in rolling-sliding contacts. Journal of Physics D: Applied Physics 49:50, pages 505302.
Crossref
Hansjörg Schultheiss, Thomas Tobie & Karsten Stahl. (2016) The Effect of Selected Grease Components on the Wear Behavior of Grease-Lubricated Gears. Journal of Tribology 138:1.
Crossref
A. Sethuramiah & Rajesh Kumar. 2016. Modeling of Chemical Wear. Modeling of Chemical Wear 41 68 .
Behzad Mahmoudi, B. Tury, C. H. Hager & G. L. Doll. (2015) Effects of Black Oxide and a WC/a-C:H Coating on the Micropitting of SAE 52100 Bearing Steel. Tribology Letters 58:2.
Crossref
José A. Brandão, Ramiro Martins, Jorge H.O. Seabra & Manuel J.D. Castro. (2015) An approach to the simulation of concurrent gear micropitting and mild wear. Wear 324-325, pages 64-73.
Crossref
Zhenglin Tang & Shaohui Li. (2014) A review of recent developments of friction modifiers for liquid lubricants (2007–present). Current Opinion in Solid State and Materials Science 18:3, pages 119-139.
Crossref
Faiz Ullah Shah, Sergei Glavatskih & Oleg N. Antzutkin. (2013) Boron in Tribology: From Borates to Ionic Liquids. Tribology Letters 51:3, pages 281-301.
Crossref
Anant S. Kolekar, Andrew V. Olver, Adam E. Sworski & Frances E. Lockwood. (2013) The efficiency of a hypoid axle—a thermally coupled lubrication model. Tribology International 59, pages 203-209.
Crossref
Sheng Li & Ahmet Kahraman. (2013) Micro-pitting fatigue lives of lubricated point contacts: Experiments and model validation. International Journal of Fatigue 48, pages 9-18.
Crossref
José A Brandão, Ramiro Martins, Jorge HO Seabra & Manuel JD Castro. (2012) Surface damage prediction during an FZG gear micropitting test. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 226:12, pages 1051-1073.
Crossref
José A. Brandão, Mathilde Meheux, Fabrice Ville, Jorge H.O. Seabra & Jorge Castro. (2012) Comparative overview of five gear oils in mixed and boundary film lubrication. Tribology International 47, pages 50-61.
Crossref
Thilo Krapfl, Dmitriy Shakhvorostov, Justin Langston, Boris Eisenberg, Daniel Debus, Ksenija Topolovec Miklozic & Gvido Miklozic. (2012) The Effect of Poly(alkyl methacrylate) Film-Formers on Pitting Performance of Driveline Fluids. Tribology Online 7:3, pages 132-138.
Crossref
R C Martins, J H O Seabra & L F Ruis-Moron. (2011) Influence of oil formulation on gear micropitting and power loss performance. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 225:6, pages 429-439.
Crossref
R. D. Evans, G. L. Doll, C. H. Hager & J. Y. Howe. (2010) Influence of Steel Type on the Propensity for Tribochemical Wear in Boundary Lubrication with a Wind Turbine Gear Oil. Tribology Letters 38:1, pages 25-32.
Crossref

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.