Citations (36)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (5)
Lin Zhang, Kangxi Fu, Peng Zhang, Peifang Wu, Jingwu Cao, Cairang Shijia, Dongbin Wei & Xuanhui Qu. (2020) Improved Braking Performance of Cu-Based Brake Pads by Utilizing Cu-Coated SiO2 Powder. Tribology Transactions 63:5, pages 829-840.
Read now
Read now
Linlin Su, Fei Gao, Lixue Wang, Xiaoming Han, Rong Fu & Hualong Tao. (2019) Iron Powder Third Body Contribution to Friction Performance of Copper-Matrix Friction Composites. Tribology Transactions 62:3, pages 486-495.
Read now
Read now
Chunfang Feng, Yan Wang, Wu Chen, Lei Zhang & Kechao Zhou. (2017) The Mechanical Mixed Layer and Its Role in Cu-15Ni-8Sn/Graphite Composites. Tribology Transactions 60:1, pages 135-145.
Read now
Read now
N. Selvakumar & P. Narayanasamy. (2016) Optimization and Effect of Weight Fraction of MoS2 on the Tribological Behavior of Mg-TiC-MoS2 Hybrid Composites. Tribology Transactions 59:4, pages 733-747.
Read now
Read now
R. Sahoo, B. B. Jha, T. K. Sahoo & S. Mantry. (2015) Effect of Volume Fraction of Primary Alpha Phase on Solid Particle Erosion Behavior of Ti-6Al-4V Alloy. Tribology Transactions 58:6, pages 1105-1118.
Read now
Read now
Articles from other publishers (31)
Baoqiang Hou, Nanlong Zhang, Qiang Zhi, Xiaonan Zhou, Bo Wang & Jianfeng Yang. (2023) Role of Cr-carbide Coating on Graphite Particles in the Mechanical and Wear Behavior of Graphite/Copper Composites. Tribology Letters 72:1.
Crossref
Crossref
Shaoli Fu, Xiaohong Chen, Ping Liu, Honglei Zhou, Wei Li & Fengcang Ma. (2023) Effect of Ti on the microstructure and properties of Cu–Cr alloy. Journal of Materials Research and Technology 27, pages 3825-3834.
Crossref
Crossref
Serhat Şap, Üsame Ali Usca, Mahir Uzun, Khaled Giasin & Danil Yu Pimenov. (2023)
Development of the hardness, three-point bending, and wear behavior of self-lubricating Cu-5Gr/Al
2
O
3
-Cr
3
C
2
hybrid composites
. Journal of Composite Materials 57:8, pages 1395-1409.
Crossref
Crossref
Sajjad Arif, Abdul Samad, Haitham Hadidi, Mohd Bilal Naim Shaikh & Salman Ansari. (2022) Dry sliding wear investigation of graphene reinforced copper-silica sand composite by response surface methodology. Materials Today Communications 33, pages 104857.
Crossref
Crossref
Ahmad A. Khalaf & Muammel M. Hanon. (2022) Prediction of Friction Coefficient for Ductile Cast Iron Using Artificial Neural Network Methodology Based on Experimental Investigation. Applied Sciences 12:23, pages 11916.
Crossref
Crossref
M. Ravichandran, S.V. Alagarsamy, V. Dhinakaran, Mohammed Abdul Samad & Jitendra Kumar Katiyar. (2022) Optimization of tribological process parameters of titanium carbide reinforced copper matrix composites. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 236:9, pages 1737-1751.
Crossref
Crossref
Üsame Ali Usca, Serhat Şap, Mahir Uzun, Khaled Giasin & Danil Yurievich Pimenov. (2022) Evaluation of Mechanical and Tribological Aspect of Self-Lubricating Cu-6Gr Composites Reinforced with SiC–WC Hybrid Particles. Nanomaterials 12:13, pages 2154.
Crossref
Crossref
Shaoli Fu, Xiaohong Chen, Ping Liu, Haipo Cui, Honglei Zhou, Fengcang Ma & Wei Li. (2022) Tribological Properties and Electrical Conductivity of Carbon Nanotube-Reinforced Copper Matrix Composites. Journal of Materials Engineering and Performance 31:6, pages 4955-4962.
Crossref
Crossref
Krishna Varma Lanke Rama, Arnuri Srinivasulu, Naidu Gurugubelli Swami & Satya Swaroop Akkarrapu Gowtham. (2022) Characterization of Copper MMC Reinforced with SiC and Graphite in Equal Proportion Made by the Powder Metallurgy Route. i-manager's Journal on Material Science 10:3, pages 38.
Crossref
Crossref
A. Miranda-López, C.A. León-Patiño, E.A. Aguilar-Reyes, E. Bedolla-Becerril & G. Rodriguez-Ortiz. (2021) Effect of graphite addition on wear behaviour of hybrid Cu/TiC-Gr infiltrated composites. Wear 484-485, pages 203793.
Crossref
Crossref
Chelliah Anand Chairman, Manickam Ravichandran, Vinayagam Mohanavel, Thanikodi Sathish, Ahmad Rashedi, Ibrahim M. Alarifi, Irfan Anjum Badruddin, Ali E. Anqi & Asif Afzal. (2021) Mechanical and Abrasive Wear Performance of Titanium Di-Oxide Filled Woven Glass Fibre Reinforced Polymer Composites by Using Taguchi and EDAS Approach. Materials 14:18, pages 5257.
Crossref
Crossref
Pankaj Shrivastava, Syed Nasimul Alam, Deepankar Panda, Santosh Kumar Sahoo, Taraknath Maity & Krishanu Biswas. (2021) Development and mechanical properties investigation of Cu-MWCNT-graphite nanoplatelets hybrid nanocomposites. Diamond and Related Materials 117, pages 108467.
Crossref
Crossref
Dr. Ranjith V, Dr. H K Shivanand2, Dr. Tukaram Jadhav3, Verma R4 & Puneeth P. (2021) Evaluation of Mechanical Properties of Micro-Titanium and CNT Reinforced Copper Based MMC. International Journal of Scientific Research in Science, Engineering and Technology, pages 81-104.
Crossref
Crossref
Tian-xu QIU, Shi-yan PAN, Cang FAN, Xu-fei ZHU & Xiao-ping SHEN. (2020) Effect of Ni-coated MoS2 on microstructure and tribological properties of (Cu−10Sn)-based composites. Transactions of Nonferrous Metals Society of China 30:9, pages 2480-2490.
Crossref
Crossref
Hai-Xia Guo & Jian-Feng Yang. (2020) Fabrication and Tribological Properties of Mesocarbon Microbead–Cu Friction Composites. Materials 13:2, pages 463.
Crossref
Crossref
Manvandra Kumar Singh, Mulkraj Anand, Pushkar Jha & Rakesh Kumar Gautam. 2019. Hysteresis of Composites. Hysteresis of Composites.
R. Anil Kumar, R. Krishna Kumar & N. Radhika. (2018) Mechanical and Wear Properties of Functionally Graded Cu-11Ni-4Si/ Graphite Composite. Silicon 11:6, pages 2613-2624.
Crossref
Crossref
Alagarsamy S.V.Ravichandran M.. (2019)
Investigations on tribological behaviour of AA7075-TiO
2
composites under dry sliding conditions
. Industrial Lubrication and Tribology 71:9, pages 1064-1071.
Crossref
Crossref
Yu-nan Tian, Zhi-he Dou, Liping Niu & Ting-an Zhang. (2019) Effect of nanoboron carbide particles on properties of copper-matrix/graphite composite materials. Materials Research Express 6:9, pages 0950c7.
Crossref
Crossref
N. Radhika, S. Thirumalini & R. Jojith. (2019) Development and Properties of Centrifugally Cast Silicon Nitride Reinforced Functionally Graded Copper Matrix Composite. Silicon 11:4, pages 2103-2116.
Crossref
Crossref
S. Moniri Javadhesari, S. Alipour & M.R. Akbarpour. (2019) Microstructural characterization and enhanced hardness, wear and antibacterial properties of a powder metallurgy SiC/Ti-Cu nanocomposite as a potential material for biomedical applications. Ceramics International 45:8, pages 10603-10611.
Crossref
Crossref
P. K. Prajapati & D. Chaira. (2018) Fabrication and Characterization of Cu–B4C Metal Matrix Composite by Powder Metallurgy: Effect of B4C on Microstructure, Mechanical Properties and Electrical Conductivity. Transactions of the Indian Institute of Metals 72:3, pages 673-684.
Crossref
Crossref
M.R. Akbarpour, S. Alipour, A. Safarzadeh & H.S. Kim. (2019) Wear and friction behavior of self-lubricating hybrid Cu-(SiC + x CNT) composites. Composites Part B: Engineering 158, pages 92-101.
Crossref
Crossref
Peng Zhang, Lin Zhang, Kangxi Fu, Jingwu Cao, Cairang Shijia & Xuanhui Qu. (2018) Effects of different forms of Fe powder additives on the simulated braking performance of Cu-based friction materials for high-speed railway trains. Wear 414-415, pages 317-326.
Crossref
Crossref
Xiancong He, Gaopeng Zou, Yongxiang Xu, Haochun Zhu, Hao Jiang, Xiaofan Jiang, Wei Xia, Jingtao Chen, Jiawei Wu & Shaofeng Yang. (2018) Nano-mechanical and tribological properties of copper matrix composites reinforced by graphene nanosheets. Progress in Natural Science: Materials International 28:4, pages 416-421.
Crossref
Crossref
Radhika N, Kamireddy Teja, Kanithi Rahul & Shivashankar A. (2018) Fabrication of Cu-Sn-Ni /SiC FGM for Automotive Applications: Investigation of its Mechanical and Tribological Properties. Silicon 10:4, pages 1705-1716.
Crossref
Crossref
N. Radhika, S. Thirumalini & A. Shivashankar. (2017) Investigation on Mechanical and Adhesive Wear Behavior of Centrifugally Cast Functionally Graded Copper/SiC Metal Matrix Composite. Transactions of the Indian Institute of Metals 71:6, pages 1311-1322.
Crossref
Crossref
Pushkar Jha, Rakesh Kumar Gautam & Rajnesh Tyagi. (2018) Modeling the dry sliding wear behavior of Cu-4wt%Ni-TiC composites using response surface methodology. Materials Today: Proceedings 5:2, pages 4692-4701.
Crossref
Crossref
Arabinda Meher & Debasis Chaira. (2017) Effect of Graphite and SiC Addition into Cu and SiC Particle Size Effect on Fabrication of Cu–Graphite–SiC MMC by Powder Metallurgy. Transactions of the Indian Institute of Metals 70:8, pages 2047-2057.
Crossref
Crossref
Linlin Su, Fei Gao, Hualong Tao, Xiaoming Han & Rong Fu. Influence of third body evolution on tribological property of copper-matrix friction material by surface treatment. Influence of third body evolution on tribological property of copper-matrix friction material by surface treatment.
Linlin Su, Fei Gao, Xiaoming Han, Rong Fu & En Zhang. (2015) Tribological Behavior of Copper–Graphite Powder Third Body on Copper-Based Friction Materials. Tribology Letters 60:2.
Crossref
Crossref