Citations (52)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (13)
Niharika Gupta, N. Tandon, R. K. Pandey, K. E. Ch. Vidyasagar & Dinesh Kalyanasundaram. (2020) Tribological and Vibration Studies of Textured Spur Gear Pairs under Fully Flooded and Starved Lubrication Conditions. Tribology Transactions 63:6, pages 1103-1120.
Read now
Read now
U. Sudeep, N. Tandon & R. K. Pandey. (2015) Tribological Studies of Lubricated Laser-Textured Point Contacts in Rolling/Sliding Reciprocating Motion with Investigations of Wettability and Nanohardness. Tribology Transactions 58:4, pages 625-634.
Read now
Read now
Nobuyoshi Ohno, Kentaro Sonoda, Hiroyuki Tsuchida, Sobahan Mia, Shigeki Morita, Hiroshi Shiomi & Shingo Obara. (2011) Bearing Fatigue Life Tests of Two Advanced Base Oils for Space Applications Under Vacuum and Atmospheric Environments. Tribology Transactions 54:6, pages 859-866.
Read now
Read now
P.M. Lugt & G.E. Morales-Espejel. (2011) A Review of Elasto-Hydrodynamic Lubrication Theory. Tribology Transactions 54:3, pages 470-496.
Read now
Read now
Aaron Greco, Ashlie Martini, Yuchuan Liu, Chih Lin & QianJ. Wang. (2010) Rolling Contact Fatigue Performance of Vibro-Mechanical Textured Surfaces. Tribology Transactions 53:4, pages 610-620.
Read now
Read now
KENNETHK. CHAO & COSTANDYS. SABA. (2009) Pretreatment of Steel Racetracks by Using Sand-Blasting Technique with a Special Emphasis on Si3N4 Powder–Part Two. Tribology Transactions 52:5, pages 632-642.
Read now
Read now
KennethK. Chao & CostandyS. Saba. (2008) Pretreatment of Steel Racetracks by using a Sand-Blasting Technique with a Special Emphasis on Si3N4 Powder—Part One. Tribology Transactions 52:1, pages 96-105.
Read now
Read now
Ivan Křupka & Martin Hartl. (2008) Effect of Surface Texturing on Very Thin Film EHD Lubricated Contacts. Tribology Transactions 52:1, pages 21-28.
Read now
Read now
I. Křupka & M. Hartl. (2007) Thin-Film Lubrication of Dented Surfaces. Tribology Transactions 50:4, pages 488-496.
Read now
Read now
T. Nakatsuji & A. Mori. (2001) The Tribological Effect of Electrolytically Produced Micro-pools and Phosphoric Compounds on Medium Carbon Steel Surfaces in Rolling - Sliding Contact. Tribology Transactions 44:2, pages 173-178.
Read now
Read now
Xuejun Zhai, L. Chang, M.R. Hoeprich & H.P. Nixon. (1997) On Mechanisms of Fatigue Life Enhancement by Surface Dents in Heavily Loaded Rolling Line Contacts. Tribology Transactions 40:4, pages 708-714.
Read now
Read now
Y.P. Chiu. (1997) The Mechanism of Bearing Surface Fatigue–-Experiments and Theories. Tribology Transactions 40:4, pages 658-666.
Read now
Read now
T. Nakatsuji, A. Mori & Y. Shimotsuma. (1995) Pitting Durability of Electrolytically Polished Medium Carbon Steel Gears. Tribology Transactions 38:2, pages 223-232.
Read now
Read now
Articles from other publishers (39)
Robert Mašović, Daniel Miler, Ivan Čular, Suzana Jakovljević, Mario Šercer & Dragan Žeželj. (2023) The Effect of Steel Electropolishing on the Tribological Behavior of a Steel–Bronze Pair in the Mixed and Boundary Lubrication Regimes. Lubricants 11:8, pages 325.
Crossref
Crossref
Tianyu Gao, Anyi Li, Xinyu Zhang, Gregory Harris & Jia Liu. (2023) A data-driven process-quality-property analytical framework for conductive composites in additive manufacturing. Manufacturing Letters 35, pages 626-635.
Crossref
Crossref
Max Marian, Andreas Almqvist, Andreas Rosenkranz & Michel Fillon. (2022) Numerical micro-texture optimization for lubricated contacts—A critical discussion. Friction 10:11, pages 1772-1809.
Crossref
Crossref
Yong Ma, Bin Ding, Yuli Chen & Dongsheng Wen. (2022) A novel method to predict nanofilm morphology on arbitrary-topographical substrate. International Journal of Mechanical Sciences 232, pages 107621.
Crossref
Crossref
Hao Gao, Lijia Zhao, Li Li, Songyuan Wu, Zhiqing Lin & Qiang Wang. (2022) Effect of Wear-Induced Surface Deformation on Stick–Slip Friction of Galvanized Automotive Steels. Langmuir 38:37, pages 11459-11467.
Crossref
Crossref
Ruijie Zhang, Chunlei Zheng, Chen Chen, Bo Lv, Guhui Gao, Zhinan Yang, Yongqiang Yang & Fucheng Zhang. (2021) Study on fatigue wear competition mechanism and microstructure evolution on the surface of a bainitic steel rail. Wear 482-483, pages 203978.
Crossref
Crossref
D. S. Shtereveria, A. A. Volkova, A. A. Kholopov, M. A. Melnikova & D. M. Melnikov. Micro dents fabrication by laser shock peening on surfaces of metal parts. Micro dents fabrication by laser shock peening on surfaces of metal parts.
Marko Sedlaček, Agnieszka Zuzanna Guštin & Borut Žužek. (2020) Influence of Laser Surface Texturing Sequence on Fatigue Properties of Coated Cold Work Tool Steel. Metals 10:12, pages 1636.
Crossref
Crossref
Ping Lu & Robert J K Wood. (2020) Tribological performance of surface texturing in mechanical applications—a review. Surface Topography: Metrology and Properties 8:4, pages 043001.
Crossref
Crossref
Motohiro Kaneta, Kenji Matsuda, Jing Wang & Peiran Yang. (2020) Numerical Study on Effect of Dimples on Tribo-Characteristics in Non-Newtonian Thermal Elastohydrodynamic Lubrication Point Contacts With Different Mechanical and Thermal Properties. Journal of Tribology 142:4.
Crossref
Crossref
Takumi Fujita, Naoya Hasegawa, Naoya Kamura & Toshihiko Sasaki. (2019) Rolling Contact Fatigue of Thrust Ball Bearing under Low Lambda Condition. Tribology Online 14:4, pages 163-172.
Crossref
Crossref
Andreas Rosenkranz, Philipp G. Grützmacher, Carsten Gachot & Henara L. Costa. (2019) Surface Texturing in Machine Elements − A Critical Discussion for Rolling and Sliding Contacts. Advanced Engineering Materials 21:8, pages 1900194.
Crossref
Crossref
Zhi-Wei Guo, Cheng-Qing Yuan, Xiu-Qin Bai & Xin-Ping Yan. (2018) Experimental Study on Wear Performance and Oil Film Characteristics of Surface Textured Cylinder Liner in Marine Diesel Engine. Chinese Journal of Mechanical Engineering 31:1.
Crossref
Crossref
S. Li & U. Parmar. (2018) The Effects of Microdimple Texture on the Friction and Thermal Behavior of a Point Contact. Journal of Tribology 140:4.
Crossref
Crossref
Di Zhang, Li Hua Liu, Hai Liang Du & Zhi Lan Chen. (2018) Effects of surface texturing on the tribological performance of the rolling bearing system. IOP Conference Series: Materials Science and Engineering 382, pages 042010.
Crossref
Crossref
Pengfei Liu, Bin Lin, Yan Li, Xiaofeng Zhang & Jixiong Fei. (2018) Liquid film characteristic in fluid hydrodynamic fixed abrasive grinding. The International Journal of Advanced Manufacturing Technology 96:9-12, pages 4205-4214.
Crossref
Crossref
Siavash Soltanahmadi, Ardian Morina, Marcel C P van Eijk, Ileana Nedelcu & Anne Neville. (2016) Investigation of the effect of a diamine-based friction modifier on micropitting and the properties of tribofilms in rolling-sliding contacts. Journal of Physics D: Applied Physics 49:50, pages 505302.
Crossref
Crossref
Kalyan C. Mutyala, Harpal Singh, R.D. Evans & G.L. Doll. (2016) Effect of deposition method on the RCF performance of Cr x N thin film ball coatings. Surface and Coatings Technology 305, pages 176-183.
Crossref
Crossref
Xiujiang Shi, Liqin Wang & Fenqi Qin. (2016) Relative fatigue life prediction of high-speed and heavy-load ball bearing based on surface texture. Tribology International 101, pages 364-374.
Crossref
Crossref
Andreas Rosenkranz, Andreas Stratmann, Carsten Gachot, Gero Burghardt, Georg Jacobs & Frank Mücklich. (2016) Improved Wear Behavior of Cylindrical Roller Thrust Bearings by Three-Beam Laser Interference . Advanced Engineering Materials 18:5, pages 854-862.
Crossref
Crossref
YU JIANG, MIKA SUVANTO & TAPANI A. PAKKANEN. (2016) SELECTIVE SURFACE MODIFICATION ON LUBRICANT RETENTION. Surface Review and Letters 23:02, pages 1550097.
Crossref
Crossref
B. Mahmoudi, G.L. Doll, C.H. HagerJr.Jr. & R.D. Evans. (2016) Influence of a WC/a-C:H tribological coating on micropitting wear of bearing steel. Wear 350-351, pages 107-115.
Crossref
Crossref
U. Sudeep, N. Tandon & R. K. Pandey. (2015) Performance of Lubricated Rolling/Sliding Concentrated Contacts With Surface Textures: A Review. Journal of Tribology 137:3.
Crossref
Crossref
Fadi Ali, Motohiro Kaneta, Ivan Křupka & Martin Hartl. (2015) Experimental and numerical investigation on the behavior of transverse limited micro-grooves in EHL point contacts. Tribology International 84, pages 81-89.
Crossref
Crossref
Xiao-Liang Yan, Xiao-Li Wang & Yu-Yan Zhang. (2014) Influence of Roughness Parameters Skewness and Kurtosis on Fatigue Life Under Mixed Elastohydrodynamic Lubrication Point Contacts. Journal of Tribology 136:3.
Crossref
Crossref
Piet M. Lugt. 2012. Grease Lubrication in Rolling Bearings. Grease Lubrication in Rolling Bearings
415
437
.
M. Vrbka, I. Křupka, P. Svoboda, P. Šperka, T. Návrat, M. Hartl & J. Nohava. (2011) Effect of shot peening on rolling contact fatigue and lubricant film thickness within mixed lubricated non-conformal rolling/sliding contacts. Tribology International 44:12, pages 1726-1735.
Crossref
Crossref
M. Vrbka, I. Křupka, O. Šamánek, P. Svoboda, M. Vaverka & M. Hartl. (2010) Effect of surface texturing on lubrication film formation and rolling contact fatigue within mixed lubricated non-conformal contacts. Meccanica 46:3, pages 491-498.
Crossref
Crossref
Chang Soon Lee, In Shik Cho, Young Shik Pyoun & In Gyu Park. (2011) Study of Inner Micro Cracks on Rolling Contact Fatigue of Bearing Steels Using Ultrasonic Nano-Crystalline Surface Modification. Key Engineering Materials 462-463, pages 979-984.
Crossref
Crossref
I Krupka, M Hartl & P Svoboda. (2009) Effects of surface topography on lubrication film formation within elastohydrodynamic and mixed lubricated non-conformal contacts. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 224:8, pages 713-722.
Crossref
Crossref
M. Vrbka, O. Šamánek, P. Šperka, T. Návrat, I. Křupka & M. Hartl. (2010) Effect of surface texturing on rolling contact fatigue within mixed lubricated non-conformal rolling/sliding contacts. Tribology International 43:8, pages 1457-1465.
Crossref
Crossref
CHANG-SOON LEE, IN-GYU PARK, YOUNG-SHIK PYOUN, IN-SHIK CHO, IN-HO CHO & JIN PARK. (2012) ROLLING CONTACT FATIGUE CHARACTERISTICS OF SAE52100 BY ULTRASONIC NANOCRYSTAL SURFACE MODIFICATION TECHNOLOGY. International Journal of Modern Physics B 24:15n16, pages 3065-3070.
Crossref
Crossref
Masahiro Higuchi, Tomomi Yamaguchi, Naomichi Furushiro, Takashi Sugimoto, Shoichi Shimada, Noboru Matsumori & Hidekazu Ogura. (2009) Development of superabrasive stone for mechanochemical superfinishing. Precision Engineering 33:1, pages 65-70.
Crossref
Crossref
I. Křupka, R. Poliščuk, M. Vaverka, M. Hartl, M. Vrbka & O. Šamánek. 2010. Advanced Tribology. Advanced Tribology
84
85
.
I. Křupka, M. Vrbka & M. Hartl. (2008) Effect of surface texturing on mixed lubricated non-conformal contacts. Tribology International 41:11, pages 1063-1073.
Crossref
Crossref
I. Křupka & M. Hartl. (2007) The effect of surface texturing on thin EHD lubrication films. Tribology International 40:7, pages 1100-1110.
Crossref
Crossref
David Whitehouse. 2002. Handbook of Surface and Nanometrology. Handbook of Surface and Nanometrology.
R.C Dommarco, P.C Bastias, G.T Hahn & C.A Rubin. (2002) The use of artificial defects in the 5-ball-rod rolling contact fatigue experiments. Wear 252:5-6, pages 430-437.
Crossref
Crossref
Kazuyuki Sasajima, Kazuya Naoi & Tadao Tsukada. (2000) A software-based relocation technique for surface asperity profiles and its application to calculate volume changes in running-in wear. Wear 240:1-2, pages 152-163.
Crossref
Crossref