Citations (65)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (14)
Burri Srinivasa Reddy, Pradeep Kumar Murugasen & Vinothkumar Sivalingam. (2023) Machinability Studies on Commercially Pure Titanium (Grade-2) Under Cryogenic Condition. Materials and Manufacturing Processes 38:12, pages 1463-1471.
Read now
Read now
Amit S. Patil, V. K. Sunnapwar, K. S. Bhole & Y. S. More. (2022) Experimental investigation and fuzzy TOPSIS optimisation of Ti6Al4V finish milling. Advances in Materials and Processing Technologies 8:4, pages 3706-3729.
Read now
Read now
N. Tamiloli, J. Venkatesan & T. SampathKumar. (2022) ANFIS based forecast and parametric investigation during processing activity of AA6082T6. Materials and Manufacturing Processes 37:1, pages 99-112.
Read now
Read now
Siva kumar, M. Adam Khan & B. Muralidharan. (2019) Processing of titanium-based human implant material using wire EDM. Materials and Manufacturing Processes 34:6, pages 695-700.
Read now
Read now
Ishwer Shivakoti, Golam Kibria, Premendra Mani Pradhan, Bal Bahadur Pradhan & Ashis Sharma. (2019) ANFIS based prediction and parametric analysis during turning operation of stainless steel 202. Materials and Manufacturing Processes 34:1, pages 112-121.
Read now
Read now
D. Palanisamy & P. Senthil. (2017) Development of ANFIS model and machinability study on dry turning of cryo-treated PH stainless steel with various inserts. Materials and Manufacturing Processes 32:6, pages 654-669.
Read now
Read now
R. Venkata Rao & V.D. Kalyankar. (2012) Parameter Optimization of Machining Processes Using a New Optimization Algorithm. Materials and Manufacturing Processes 27:9, pages 978-985.
Read now
Read now
S. Chauhan & Kali Dass. (2012) Optimization of Machining Parameters in Turning of Titanium (Grade-5) Alloy Using Response Surface Methodology. Materials and Manufacturing Processes 27:5, pages 531-537.
Read now
Read now
M. Armendia, P. Osborne, A. Garay, J. Belloso, S. Turner & P.-J. Arrazola. (2012) Influence of Heat Treatment on the Machinability of Titanium Alloys. Materials and Manufacturing Processes 27:4, pages 457-461.
Read now
Read now
Domniţa
Florina Frăţilă & Cristian Caizar. (2012) Assessment of Cooling Effect and Surface Quality to Face Milling of AlMg3 Using Several Cooling Lubrication Methods. Materials and Manufacturing Processes 27:3, pages 291-296.
Read now
Read now
Cebeli Özek, Ulaş Çaydaş & Engin Ünal. (2012) A Fuzzy Model for Predicting Surface Roughness in Plasma Arc Cutting of AISI 4140 Steel. Materials and Manufacturing Processes 27:1, pages 95-102.
Read now
Read now
H. Baseri. (2011) Design of Adaptive Neuro-Fuzzy Inference System for Estimation of Grinding Performance. Materials and Manufacturing Processes 26:5, pages 757-763.
Read now
Read now
B. Latha & V. S. Senthilkumar. (2010) Modeling and Analysis of Surface Roughness Parameters in Drilling GFRP Composites Using Fuzzy Logic. Materials and Manufacturing Processes 25:8, pages 817-827.
Read now
Read now
G. Quintana, J.
de Ciurana & J. Ribatallada. (2010) Surface Roughness Generation and Material Removal Rate in Ball End Milling Operations. Materials and Manufacturing Processes 25:6, pages 386-398.
Read now
Read now
Articles from other publishers (51)
Tarek M. El Hossainy, Yasser Zeyada & Abdallah Abdelkawy. (2023) Machining process parameters optimization using soft computing technique. Journal of Engineering and Applied Science 70:1.
Crossref
Crossref
Jiali Zhao, Qing Wang, Yazhou Wang, Xiaopan Gao, Xuesong Teng & Yongjie Ma. (2023) Multi-objective Optimization of Non-circular Gear Through Orthogonal Array and Fuzzy Comprehensive Evaluation Method in WEDM. Arabian Journal for Science and Engineering.
Crossref
Crossref
G. Senthilkumar, R. Murugan, G. Gnanakumar & N. Nithyanandan. (2023) Fuzzy logic modelling of machining characteristics for CNC milling of EN24 using Ti-N coated tool. Materials Today: Proceedings 82, pages 137-144.
Crossref
Crossref
Danil Yu Pimenov, Mozammel Mia, Munish K. Gupta, Álisson R. Machado, Giuseppe Pintaude, Deepak Rajendra Unune, Navneet Khanna, Aqib Mashood Khan, Ítalo Tomaz, Szymon Wojciechowski & Mustafa Kuntoğlu. (2022) Resource saving by optimization and machining environments for sustainable manufacturing: A review and future prospects. Renewable and Sustainable Energy Reviews 166, pages 112660.
Crossref
Crossref
Yongqiang Zhang, Yongguo Wang & Zhanlong Han. (2022) Study on Characteristics for Reaming Titanium Alloy Ti6Al4V with Two Kinds of Cemented-Carbide Groove Reamers. Materials 15:14, pages 5027.
Crossref
Crossref
Arti Saxena, Y.M. Dubey & Manish Kumar. (2022) Fuzzy logic-based modeling and analysis of SBCNC-60 machine for turning operation of surface finish and MRR output. Journal of Intelligent & Fuzzy Systems 43:1, pages 1569-1582.
Crossref
Crossref
Thakur Singh, Pawan Kumar, Jatinder Kumar & Joy Prakash Misra. (2021) Modeling of Electric Discharge Wire Cut of Aviation Grade Alloy Using Fuzzy Technique. Journal of Advanced Manufacturing Systems 21:01, pages 255-274.
Crossref
Crossref
G. Senthilkumar, T. Mayavan & H. Manikandan. (2022) Prediction of mechanical characteristics of friction welded dissimilar EN 10028P 355 GH steel and AISI 430 steel joint by fuzzy logic analysis. Materials Today: Proceedings 68, pages 2182-2188.
Crossref
Crossref
Ashok Kumar Sahoo, Amlana Panda & Ramanuj Kumar. 2022. Proceedings of 2nd International Conference on Smart Computing and Cyber Security. Proceedings of 2nd International Conference on Smart Computing and Cyber Security
315
324
.
P Devendran & P Ashoka Varthanan. (2021) Prediction of weldment mechanical properties in GMAW with robot-assisted using fuzzy logic systems. Materials Research Express 8:12, pages 126524.
Crossref
Crossref
Riaz Muhammad. (2021) A Fuzzy Logic Model for the Analysis of Ultrasonic Vibration Assisted Turning and Conventional Turning of Ti-Based Alloy. Materials 14:21, pages 6572.
Crossref
Crossref
M Parthiban & M Harinath. (2021) Optimization of micro-EDM drilling on titanium alloy (Ti-6AL-4V) using RSM and Neural Network. Journal of Physics: Conference Series 2070:1, pages 012223.
Crossref
Crossref
Muhammad Mukhtar Liman, Khaled Abou-El-Hossein & Lukman Niyi Abdulkadir. (2019) Fuzzy logic-based modeling and analysis of surface roughness, electrostatic charge, and material removal rate in ultrahigh precision diamond turning of rigid contact lens polymer. Journal of Thermoplastic Composite Materials 34:7, pages 952-976.
Crossref
Crossref
Asim Ahmad Riaz, Riaz Muhammad, Naveed Ullah, Ghulam Hussain, Mohammed Alkahtani & Waseem Akram. (2021) Fuzzy Logic-Based Prediction of Drilling-Induced Temperatures at Varying Cutting Conditions along with Analysis of Chips Morphology and Burrs Formation. Metals 11:2, pages 277.
Crossref
Crossref
Sahil Sharma, Umesh Kumar Vates & Amit Bansal. (2020) Optimization of machining characteristics for EDM of different nickel-based alloys by embodying of fuzzy, grey relational and Taguchi technique. World Journal of Engineering 18:1, pages 23-36.
Crossref
Crossref
V. Kaviarasan, Sangeetha Elango, Ezra Morris Abraham Gnanamuthu & R. Durairaj. 2021. Futuristic Trends in Intelligent Manufacturing. Futuristic Trends in Intelligent Manufacturing
9
20
.
Partha Protim Das, Sanjeev Kumar & Shankar Chakraborty. Fuzzy modeling and parametric analysis of wire-cut electrical discharge machining process in cutting of 2205 grade duplex stainless steel. Fuzzy modeling and parametric analysis of wire-cut electrical discharge machining process in cutting of 2205 grade duplex stainless steel.
Swastik Pradhan, Manisha Priyadarshini & Sambit Kumar Mohapatra. 2020. Advances in Intelligent Manufacturing. Advances in Intelligent Manufacturing
51
58
.
Guofa Li, Hongxiang Zhu, Jili Wang, Xinge Zhang, Yongchao Huo & Haiji Yang. (2019) Research on importance evaluation of NC machine tool working loads based on AHP-fuzzy comprehensive evaluation method. IOP Conference Series: Materials Science and Engineering 612:3, pages 032081.
Crossref
Crossref
Dragan Rodic, Marin Gostimirovic, Nikola Lakovic, Branislav Batinic & Nenad Kulundzic. (2019) Fuzzy analysis of surface roughness in electrical discharge machining. Fuzzy analysis of surface roughness in electrical discharge machining.
Pavel Kovac, Marin Gostimirovic, Dragan Rodic & Borislav Savkovic. (2019) Using the temperature method for the prediction of tool life in sustainable production. Measurement 133, pages 320-327.
Crossref
Crossref
Qingzhong Xu, Jun Zhao, Xing Ai, Weimin Huang & Guijie Wang. (2017) Optimum selection of tool materials for machining of high-strength steels based on fuzzy comprehensive evaluation method. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 233:1, pages 145-153.
Crossref
Crossref
Narendra Krishania & Anil Kumar Birru. 2019. Advances in Computational Methods in Manufacturing. Advances in Computational Methods in Manufacturing
447
458
.
Eva Rubio, María Villeta, José Valencia & José Sáenz de Pipaón. (2018) Cutting Parameter Selection for Efficient and Sustainable Repair of Holes Made in Hybrid Mg–Ti–Mg Component Stacks by Dry Drilling Operations. Materials 11:8, pages 1369.
Crossref
Crossref
I.P. Okokpujie, O.S. Ohunakin, C.A. Bolu & K.O. Okokpujie. (2018) Experimental data-set for prediction of tool wear during turning of Al-1061 alloy by high speed steel cutting tools. Data in Brief 18, pages 1196-1203.
Crossref
Crossref
Yahya Hişman ÇELİK & Erol KILIÇKAP. (2018) Titanyum Alaşımlarından Ti-6Al-4V’nın İşlenmesinde Karşılaşılan Zorluklar: Derleme. Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji 6:1, pages 163-175.
Crossref
Crossref
Mehdi Heidari & Jiwang Yan. (2017) Nanometer-scale chip formation and surface integrity of pure titanium in diamond turning. The International Journal of Advanced Manufacturing Technology 95:1-4, pages 479-492.
Crossref
Crossref
Munish K. Gupta & P. K. Sood. (2017) Surface roughness measurements in NFMQL assisted turning of titanium alloys: An optimization approach. Friction 5:2, pages 155-170.
Crossref
Crossref
Trung Nguyen, Patrick Kwon, Di Kang & Thomas R. Bieler. (2016) The Origin of Flank Wear in Turning Ti-6Al-4V. Journal of Manufacturing Science and Engineering 138:12.
Crossref
Crossref
Shubhabrata Datta. 2016. Materials Design Using Computational Intelligence Techniques. Materials Design Using Computational Intelligence Techniques
85
106
.
Nizam Uddin Ahamed, Zulkifli Yusof, Zamzury Hamedon, Mohammad Fazle Rabbi, Tasriva Sikandar, Rajkumar Palaniappan, Md. Asraf Ali, Sam Matiur Rahman & K. Sundaraj. (2016) Fuzzy logic controller design for intelligent drilling system. Fuzzy logic controller design for intelligent drilling system.
Arkadeb Mukhopadhyay, Santanu Duari, Tapan Kumar Barman & Prasanta Sahoo. (2015) Tribological Performance Optimization of Electroless Ni–B Coating under Lubricated Condition using Hybrid Grey Fuzzy Logic. Journal of The Institution of Engineers (India): Series D 97:2, pages 215-231.
Crossref
Crossref
Emel Kuram & Babur Ozcelik. (2014) Micro-milling performance of AISI 304 stainless steel using Taguchi method and fuzzy logic modelling. Journal of Intelligent Manufacturing 27:4, pages 817-830.
Crossref
Crossref
A. Tamilarasan, D. Rajamani & A. Renugambal. (2015) An Approach on Fuzzy and Regression Modeling for Hard Milling Process. Applied Mechanics and Materials 813-814, pages 498-504.
Crossref
Crossref
V. Sivaraman & S. Prakash. (2015) Computational Intelligence in Optimization of Process Parameters in Turning Metals and Composites – A Review. Applied Mechanics and Materials 766-767, pages 914-920.
Crossref
Crossref
J. Nithyanandam, K. Palanikumar & Sushil Laldas. (2015) Fuzzy Modeling of Surface Roughness Parameters in Machining Ti-6Al-4V Alloy. Applied Mechanics and Materials 766-767, pages 681-686.
Crossref
Crossref
Mohsen Marani Barzani, Erfan Zalnezhad, Ahmed A.D. Sarhan, Saeed Farahany & Singh Ramesh. (2015) Fuzzy logic based model for predicting surface roughness of machined Al–Si–Cu–Fe die casting alloy using different additives-turning. Measurement 61, pages 150-161.
Crossref
Crossref
P. Sivaprakasam, P. Hariharan & S. Gowri. (2014) Modeling and analysis of micro-WEDM process of titanium alloy (Ti–6Al–4V) using response surface approach. Engineering Science and Technology, an International Journal 17:4, pages 227-235.
Crossref
Crossref
Rupesh Kumar Pandey & Sudhansu Sekhar Panda. (2014) A feasibility investigation for modeling and optimization of temperature in bone drilling using fuzzy logic and Taguchi optimization methodology. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine 228:11, pages 1135-1145.
Crossref
Crossref
J. Nithyanandam, Sushil Laldas & K. Palanikumar. (2014) Surface Roughness Optimization in Machining of Titanium Alloy (Ti-6Al-4V). Advanced Materials Research 984-985, pages 42-47.
Crossref
Crossref
S Rajesh, S Rajakarunakaran & R Sudhkarapandian. (2013) Optimization of the red mud–aluminum composite in the turning process by the Grey relational analysis with entropy. Journal of Composite Materials 48:17, pages 2097-2105.
Crossref
Crossref
Suman Chatterjee, Kumar Abhishek, Rajiv Kumar Yadav & S S Mahapatra. (2014) Optimization of drilling process parameters by harmony search algorithm. Optimization of drilling process parameters by harmony search algorithm.
K. Rajasekhar & N. Naresh. (2014) Modeling and analysis of process parameters in machining AISI 304 stainless steel using fuzzy logic. i-manager's Journal on Mechanical Engineering 4:2, pages 18-26.
Crossref
Crossref
D. Fratila. 2014. Comprehensive Materials Processing. Comprehensive Materials Processing
163
175
.
S. Ramesh & L. Karunamoorthy. (2013) Turning Investigations on Machining of Ti64 Alloy with Different Cutting Tool Inserts. Materials Science Forum 763, pages 1-27.
Crossref
Crossref
V. S. S. Kumar, C. Ezilarasan & S. S. Kumaran. (2013) Experimental Investigation and Optimization of Cutting Parameters in Machining of Ti6Al4V Alloy by an MT-CVD Insert. Journal of The Institution of Engineers (India): Series C 94:2, pages 155-163.
Crossref
Crossref
Vikas Upadhyay, P.K. Jain & N.K. Mehta. (2013) In-process prediction of surface roughness in turning of Ti–6Al–4V alloy using cutting parameters and vibration signals. Measurement 46:1, pages 154-160.
Crossref
Crossref
Rupesh Kumar Pandey & S.S. Panda. (2012) Modeling of Temperature in Orthopaedic Drilling Using Fuzzy Logic. Applied Mechanics and Materials 249-250, pages 1313-1318.
Crossref
Crossref
T Rajasekaran, K Palanikumar & BK Vinayagam. (2011) Experimental investigation and analysis in turning of CFRP composites. Journal of Composite Materials 46:7, pages 809-821.
Crossref
Crossref
Domnita-Florina Fratila. (2012) Research of Environment-Friendly Techniques Influence on Accuracy of Gear Processing in Context of Sustainable Machining by Near Dry Machining. Acta Mechanica Slovaca 16:1, pages 58-65.
Crossref
Crossref
A.I. Azmi. (2012) Design of Fuzzy Logic Model for the Prediction of Tool Performance During Machining of Composite Materials. Procedia Engineering 38, pages 208-217.
Crossref
Crossref