Fuzzy Modeling and Analysis of Machining Parameters in Machining Titanium Alloy

REFERENCES

• Narutaki , N. ; Murakoshi , A. ; Takeyama , H. Study on machining of titanium alloys . Annals of the CIRP 1983 , 32 ( 1 ), 65 – 69 .
   Google Scholar
• Hartung , P.D. ; Kramer , B.M. ; Von Turkovich , B.F. Tool wear in titanium machining . Annals of the CIRP 1982 , 31 ( 1 ), 75 – 80 .
   Google Scholar
• Field , M. Surface Integrity—A new requirement for improving reliability of aerospace hardware. 18th Annual National SAMPE Symposium, 1973.
   Google Scholar
• Komanduri , R. ; Von Turkovich , B.F. New observations on the mechanism of chip formation when machining titanium alloys . Wear 1981 , 69 , 179 – 188 .
   Web of Science ®Google Scholar
• Bonifacacia , M.E.R. ; Diniz , A.E. Correlating tool wear, tool life, surface roughness and tool vibration in finish turning with coated carbide tools . Wear 1994 , 173 , 137 – 144 .
   Google Scholar
• Bayoumi , A.E. ; Xie , J.Q. Some metallurgical aspects of chip formation in cutting Ti-6wt.%Al-4wt.%V alloy . Materials Science and Engineering A 1995 , 190 , 173 – 180 .
   Web of Science ®Google Scholar
• Nurul Amin , A.K.M. ; Ahmad , F.I. ; Nor Khairusshima , M.K. Effectiveness of uncoated WC–Co and PCD inserts in end milling of titanium alloy . Journal of Materials Processing Technology 2007 , 192–193 , 147 – 158 .
   Web of Science ®Google Scholar
• Che-Haron , H. Toll life and surface integrity in turning titanium alloy . Journal of Materials Processing Technology 2001 , 118 ( 1–3 ), 231 – 237 .
   Google Scholar
• Hughes , J.I. ; Sharman , A.R.C. ; Ridgway , K. The effect of tool edge preparation on tool life and workpiece surface integrity. Proceedings of Institutions of Mechanical Engineers . Journal of Engineering and Manufacture Part B 2004 , 218 , 1113 – 1123 .
   Web of Science ®Google Scholar
• Colafemina , J.P. ; Jasinevicius , R.G. ; Duduch , J.G. Surface integrity of ultra-precision diamond turned Ti (commercially pure) and Ti alloy (Ti-6Al-4V). Proceedings of Institutions of Mechanical Engineers . Journal of Engineering and Manufacture Part B 2007 , 221 ( 6 ), 999 – 1006 .
   Google Scholar
• Ahmet Hascalik. ; Ulas Caydas . Optimization of turning parameters for surface roughness and tool life based on the Taguchi method . International Journal of Advanced Manufacturing Technology 2007 , DOI 10.1007/s001 70-007-1147-0 .
   Google Scholar
• Venugopal , K.A. ; Paul , S. ; Chatopadhyay , A.B. Tool wear in cryogenic turning of Ti-6Al-4V alloy . Cryogenics 2007 , 47/1 , 12 – 18 .
   Google Scholar
• Zoya , Z.A. ; Krishnamurthy , R. The performance of CBN tools in the machining of titanium alloys . Journal of Materials Processing Technology 2000 , 100 , 80 – 86 .
   Web of Science ®Google Scholar
• Konar , A. Artificial Intelligence and Soft Computing ; CRC Press Inc. , Boca Raton , FL , 2000 .
   Google Scholar
• Zadeh , L. Fuzzy sets . International Journal of Information and Control 1965 , 8 , 338 – 353 .
   Web of Science ®Google Scholar
• Dweiri , F. ; Al-Jarrah , M. ; Al-Wedyan , H. Fuzzy surface roughness modeling of CNC down milling of Alumic-79 . Journal of Materials Processing Technology 2003 , 133 , 266 – 275 .
   Web of Science ®Google Scholar
• Tang , Y.S. ; Wang , Y.S. An adaptive fuzzy control system for turning operations . International Journal of Machine Tools and Manufacture 1994 , 33 ( 6 ), 761 – 771 .
   Google Scholar
• Fang , X.D. Expert system support fuzzy diagnosis of finish-turning process states . International Journal of Machine Tools and Manufacture 1995 , 35 ( 6 ), 913 – 924 .
   Google Scholar
• Palanikumar , K. ; Karunamoorthy , L. ; Karthikeyan , R. ; Latha , B. Optimization of machining parameters in turning GFRP composites using a carbide (K10) tool based on the Taguchi method with fuzzy logics . Metals and Materials 2006 , 12/6 , 483 – 491 .
   Google Scholar
• Montgomery , D.C. Design and Analysis of Experiments ; John Wiley , New York , 1991 .
   Google Scholar
• Passino , K.M. ; Yurkovich , S. Fuzzy Control ; Addison-Wesley : Reading , MA , 1998 .
   Google Scholar
• David A. Stephenson ; John S. Agapiou . Metal Cutting Theory and Practice ; Marcel Dekker, Inc. : New York , 1997 .
   Google Scholar
• Ezugwu , E.O. ; Bonney , J. ; Yamane , Y. An overview of the machinability of aeroengine alloys . Journal of Materials Processing Technology 2003 , 134 , 233 – 253 .
   Web of Science ®Google Scholar
• Machado , A.R. ; Wallbank , J. Machining of titanium and its alloys—A review. Proceedings of Institutions of Mechanical Engineers . Journal of Engineering and Manufacture Part B 1990 , 204 , 53 – 60 .
   Web of Science ®Google Scholar
• Chandler , H.E. Metals Handbook Machining 9th Ed . 1989 , 16 , 844 – 857 .
   Google Scholar