Citations (101)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (36)
L. Selvarajan, R. Rajavel, Mohammed Yunus & Rami Alfattani. (2023) Die-sinking and rotary EDM surface and subsurface analysis of MoSi2-SiC ceramic composites. Materials Science and Technology 39:18, pages 3150-3166.
Read now
Read now
Sudhir Kumar, Sanjoy Kumar Ghoshal, Pawan Kumar Arora & Leeladhar Nagdeve. (2021) Multi-variable optimization in die-sinking EDM process of AISI420 stainless steel. Materials and Manufacturing Processes 36:5, pages 572-582.
Read now
Read now
Meinam Annebushan Singh, Sanjib Kr Rajbongshi, Deba Kumar Sarma, Ondrej Hanzel, Jaroslav Sedláček & Pavol Šajgalík. (2019) Surface and porous recast layer analysis in µ-EDM of MWCNT-Al2O3 composites. Materials and Manufacturing Processes 34:5, pages 567-579.
Read now
Read now
Meinam Annebushan Singh, Deba Kumar Sarma, Ondrej Hanzel, Jaroslav Sedláček & Pavol Šajgalík. (2018) Surface characteristics and erosion phenomena in WEDM of alumina composites. Materials and Manufacturing Processes 33:16, pages 1815-1821.
Read now
Read now
Mandeep Singh Rayat, Simranpreet Singh Gill, Rupinder Singh & Lochan Sharma. (2017) Fabrication and machining of ceramic composites — A review on current scenario. Materials and Manufacturing Processes 32:13, pages 1451-1474.
Read now
Read now
Y. F. Song, L. R. Xiao, X. J. Zhao, H. Zhou, W. Zhang, L. Guo & Y. H. Wang. (2016) Fabrication, Microstructure and Shear Properties of Al Foam Sandwich. Materials and Manufacturing Processes 31:8, pages 1046-1051.
Read now
Read now
Ying Zhang, Yuqian Wang, Junzhan Zhang, Yongsheng Liu, Xiaojun Yang & Weinan Li. (2016) Effects of Laser Repetition Rate and Fluence on Micromachining of TiC Ceramic. Materials and Manufacturing Processes 31:7, pages 832-837.
Read now
Read now
Amoljit Singh Gill & Sanjeev Kumar. (2016) Surface Roughness and Microhardness Evaluation for EDM with Cu–Mn Powder Metallurgy Tool. Materials and Manufacturing Processes 31:4, pages 514-521.
Read now
Read now
Chun-Liang Yeh & Yi-Shiuan Chen. (2015) Studies of Ta, Al, and Carbon Sources on Combustion Synthesis of Alumina–Tantalum Carbide Composites. Materials and Manufacturing Processes 30:3, pages 298-302.
Read now
Read now
Yongfeng Guo, Pengju Hou, Dongxiang Shao, Zongfeng Li, Li Wang & Lin Tang. (2014) High-Speed Wire Electrical Discharge Machining of Insulating Zirconia with a Novel Assisting Electrode. Materials and Manufacturing Processes 29:5, pages 526-531.
Read now
Read now
T. Muthuramalingam, B. Mohan, A. Rajadurai & M.
D. Antony Arul Prakash. (2013) Experimental Investigation of Iso Energy Pulse Generator on Performance Measures in EDM. Materials and Manufacturing Processes 28:10, pages 1137-1142.
Read now
Read now
T. Muthuramalingam & B. Mohan. (2013) Influence of Tool Electrode Properties on Machinability in Spark Erosion Machining. Materials and Manufacturing Processes 28:8, pages 939-943.
Read now
Read now
S. Rajendran, K. Marimuthu & M. Sakthivel. (2013) Study of Crack Formation and Resolidified Layer in EDM Process on T90Mn2W50Cr45 Tool Steel. Materials and Manufacturing Processes 28:6, pages 664-669.
Read now
Read now
Sarabjeet
Singh Sidhu, Ajay Batish & Sanjeev Kumar. (2013) EDM of Metal Matrix Composite for Parameter Design Using Lexicographic Goal Programming. Materials and Manufacturing Processes 28:4, pages 495-500.
Read now
Read now
T. Muthuramalingam & B. Mohan. (2013) Influence of Discharge Current Pulse on Machinability in Electrical Discharge Machining. Materials and Manufacturing Processes 28:4, pages 375-380.
Read now
Read now
Ravindranadh Bobbili, V. Madhu & A.
K Gogia. (2013) Effect of Wire-EDM Machining Parameters on Surface Roughness and Material Removal Rate of High Strength Armor Steel. Materials and Manufacturing Processes 28:4, pages 364-368.
Read now
Read now
Anil Kumar, Sachin Maheshwari, Chitra Sharma & Naveen Beri. (2012) Machining Efficiency Evaluation of Cryogenically Treated Copper Electrode in Additive Mixed EDM. Materials and Manufacturing Processes 27:10, pages 1051-1058.
Read now
Read now
Renjie Ji, Yonghong Liu, Yanzhen Zhang, Fei Wang, Baoping Cai & Xingsheng Fu. (2012) Single Discharge Machining Insulating Al2O3 Ceramic with High Instantaneous Pulse Energy in Kerosene. Materials and Manufacturing Processes 27:6, pages 676-682.
Read now
Read now
Rina Chakravorty, Susanta
Kumar Gauri & Shankar Chakraborty. (2012) Optimization of Correlated Responses of EDM Process. Materials and Manufacturing Processes 27:3, pages 337-347.
Read now
Read now
Domniţa
Florina Frăţilă & Cristian Caizar. (2012) Assessment of Cooling Effect and Surface Quality to Face Milling of AlMg3 Using Several Cooling Lubrication Methods. Materials and Manufacturing Processes 27:3, pages 291-296.
Read now
Read now
Renjie Ji, Yonghong Liu, Yanzhen Zhang, Fei Wang, Baoping Cai & Xin Dong. (2012) Machining Performance Optimization in End ED Milling and Mechanical Grinding Compound Process. Materials and Manufacturing Processes 27:2, pages 221-228.
Read now
Read now
Tarun Goyal, R.S. Walia & T.S. Sidhu. (2012) Effect of Parameters on Coating Density for Cold Spray Process. Materials and Manufacturing Processes 27:2, pages 193-200.
Read now
Read now
Vijayender Singh, Sudarsan Ghosh & P.
Venkateswara Rao. (2012) Grindability Improvement of AlSiTi Conductive Ceramic. Materials and Manufacturing Processes 27:2, pages 214-220.
Read now
Read now
Tarun Goyal, Ravinderjit
Singh Walia & T.S. Sidhu. (2012) Study of Coating Thickness of Cold Spray Process Using Taguchi Method. Materials and Manufacturing Processes 27:2, pages 185-192.
Read now
Read now
K Ojha, R K Garg & K K Singh. (2011) Effect of chromium powder suspended dielectric on surface roughness in PMEDM process. Tribology - Materials, Surfaces & Interfaces 5:4, pages 165-171.
Read now
Read now
M. Villeta, E.M. Rubio, J. M.
Sáenz De Pipaón & M.A. Sebastián. (2011) Surface Finish Optimization of Magnesium Pieces Obtained by Dry Turning Based on Taguchi Techniques and Statistical Tests. Materials and Manufacturing Processes 26:12, pages 1503-1510.
Read now
Read now
Jujhar Singh, P.S. Satsangi, R.S. Walia & V.P. Singh. (2011) Micro-Hardness and Machined Surface Damage Study for Continuous and Discontinuous Ultrasonic Vibration Assisted Electrical Discharge Machining. Materials and Manufacturing Processes 0:0.
Read now
Read now
Anil Kumar, Sachin Maheshwari, Chitra Sharma & Naveen Beri. (2011) Analysis of Machining Characteristics in Additive Mixed Electric Discharge Machining of Nickel-Based Super Alloy Inconel 718. Materials and Manufacturing Processes 26:8, pages 1011-1018.
Read now
Read now
A.
Cheng Wang, L. Tsai, C.H. Liu, K.Z. Liang & S.J. Lee. (2011) Elucidating the Optimal Parameters in Magnetic Finishing with Gel Abrasive. Materials and Manufacturing Processes 26:5, pages 786-791.
Read now
Read now
Vijayender Singh, Sudarsan Ghosh & P.
Venkateswara Rao. (2011) Comparative Study of Specific Plowing Energy for Mild Steel and Composite Ceramics Using Single Grit Scratch Tests. Materials and Manufacturing Processes 26:2, pages 272-281.
Read now
Read now
Naveen Beri, Sachin Maheshwari, Chitra Sharma & Anil Kumar. (2010) Technological Advancement in Electrical Discharge Machining with Powder Metallurgy Processed Electrodes: A Review. Materials and Manufacturing Processes 25:10, pages 1186-1197.
Read now
Read now
Anil Kumar, Sachin Maheshwari, Chitra Sharma & Naveen Beri. (2010) Research Developments in Additives Mixed Electrical Discharge Machining (AEDM): A State of Art Review. Materials and Manufacturing Processes 25:10, pages 1166-1180.
Read now
Read now
Ravipudi
Venkata Rao, P.J. Pawar & J.P. Davim. (2010) Parameter Optimization of Ultrasonic Machining Process Using Nontraditional Optimization Algorithms. Materials and Manufacturing Processes 25:10, pages 1120-1130.
Read now
Read now
T.M. El-Hossainy, A.A. El-Zoghby, M.A. Badr, K.Y. Maalawi & M.F. Nasr. (2010) Cutting Parameter Optimization when Machining Different Materials. Materials and Manufacturing Processes 25:10, pages 1101-1114.
Read now
Read now
S. Sarkar, K. Ghosh, S. Mitra & B. Bhattacharyya. (2010) An Integrated Approach to Optimization of WEDM Combining Single-Pass and Multipass Cutting Operation. Materials and Manufacturing Processes 25:8, pages 799-807.
Read now
Read now
B. Latha & V. S. Senthilkumar. (2010) Modeling and Analysis of Surface Roughness Parameters in Drilling GFRP Composites Using Fuzzy Logic. Materials and Manufacturing Processes 25:8, pages 817-827.
Read now
Read now
Articles from other publishers (65)
Yujin Chen, Yaoguang Wu, Mengmeng Cheng, Debin Lai, Jihong Zhu & Yanmei Meng. (2023) Experimental study on micro electrical discharge machining of alumina–titanium carbide ceramic materials. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, pages 146442072311770.
Crossref
Crossref
Yujin Chen, Yaoguang Wu, Mengmeng Cheng, Jihong Zhu, Yanmei Meng & Xiele Mu. (2023) Performance prediction and parameter optimization of alumina-titanium carbide ceramic micro-EDM hole machining process based on XGBoost. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, pages 146442072311767.
Crossref
Crossref
L. Selvarajan, R. Rajavel, K. Venkataramanan & V.P. Srinivasan. (2023) Experimental investigation on surface morphology and recasting layer of Si3N4-TiN composites machined by die-sinking and rotary EDM. Ceramics International 49:5, pages 8487-8501.
Crossref
Crossref
Manisha Priyadarshini, Swastik Pradhan & Rajashree Samantray. 2023. Advanced Flexible Ceramics. Advanced Flexible Ceramics
243
257
.
Binoy Kumar Baroi, Tapas Debnath, Jagadish & Promod Kumar Patowari. 2023. Recent Advancements in Mechanical Engineering. Recent Advancements in Mechanical Engineering
587
599
.
Ali KALYON. (2022) TAGUCHI METHOD FOR OPTIMIZING TOOL WEAR RATE AND OVERCUT IN ELECTRO DISCHARGE MACHININGELEKTRO EROZYON İLE İŞLEMEDE TAKIM AŞINMA ORANININ VE YANAL AÇIKLIĞIN TAGUCHI YÖNTEMİ İLE OPTİMİZASYONU. Adıyaman Üniversitesi Mühendislik Bilimleri Dergisi 9:18, pages 471-480.
Crossref
Crossref
Rajat Chakraborty & Oindrila Roy. (2022) SUSTAINABLE ENERGY-EFFICIENT CONVERSION OF WASTE TEA LEAVES TO REDUCING SUGAR: OPTIMIZATION AND LIFE-CYCLE ENVIRONMENTAL IMPACT ASSESSMENT. Journal of Environmental Engineering and Landscape Management 30:2, pages 276-283.
Crossref
Crossref
Zsolt János Viharos & Balázs Zsolt Farkas. (2021) Microsecond measurement resolution for process cycle diagnostics of micro-EDM milling. Measurement: Sensors 18, pages 100123.
Crossref
Crossref
Mohd Danish, Munish Kumar Gupta, Saeed Rubaiee, Anas Ahmed, A. Mahfouz & Muhammad Jamil. (2021) Machinability investigations on CFRP composites: a comparison between sustainable cooling conditions. The International Journal of Advanced Manufacturing Technology 114:11-12, pages 3201-3216.
Crossref
Crossref
Eltefat Ahmadi, Ryosuke o. Suzuki, Takumi Kaneko & Tatsuya Kikuchi. (2020) A Sustainable Approach for Producing Ti and TiS2 from TiC. Metallurgical and Materials Transactions B 52:1, pages 77-87.
Crossref
Crossref
Emilia Franczyk, Magdalena Machno & Wojciech Zębala. (2021) Investigation and Optimization of the SLM and WEDM Processes’ Parameters for the AlSi10Mg-Sintered Part. Materials 14:2, pages 410.
Crossref
Crossref
Rahul Nadda & Chandrakant K. Nirala. 2021. Advanced Machining and Finishing. Advanced Machining and Finishing
177
215
.
Ali Kalyon. (2020) Optimization of machining parameters in sinking electrical discharge machine of caldie plastic mold tool steel. Sādhanā 45:1.
Crossref
Crossref
Goutham Murari V.P.Selvakumar G.Chandrasekhara Sastry C.. (2020) Experimental Investigation of Wire-EDM Machining of Low Conductive Al-SiC-TiC Metal Matrix Composite. Metals 10:9, pages 1188.
Crossref
Crossref
Arunbharathi Ramaswamy & Ashoka Varthanan Perumal. (2020) Multi-objective optimization of drilling EDM process parameters of LM13 Al alloy–10ZrB2–5TiC hybrid composite using RSM. Journal of the Brazilian Society of Mechanical Sciences and Engineering 42:8.
Crossref
Crossref
Muthuramalingam Thangaraj, Ramamurthy Annamalai, Khaja Moiduddin, Mohammed Alkindi, Sundar Ramalingam & Osama Alghamdi. (2020) Enhancing the Surface Quality of Micro Titanium Alloy Specimen in WEDM Process by Adopting TGRA-Based Optimization. Materials 13:6, pages 1440.
Crossref
Crossref
Binoy Kumar Baroi, Tapas Debnath, Jagadish & Promod Kumar Patowari. (2020) Machinability assessment of titanium grade 2 alloy using deionized water in EDM. Materials Today: Proceedings 26, pages 2221-2225.
Crossref
Crossref
Tapas Debnath, Binoy Kumar Baroi, Jagadish & Promod Kumar Patowari. (2020) Machinability study of 430 stainless steel using tap water in EDM. Materials Today: Proceedings 26, pages 2179-2183.
Crossref
Crossref
S. Das, S. Kumar, B. Doloi & B. Bhattacharyya. 2020. Advances in Unconventional Machining and Composites. Advances in Unconventional Machining and Composites
599
610
.
Magdalena Machno & Andrzej Matras. (2019) Prediction method of input parameters impacting of dimensional accuracy of high aspect ratio holes obtained by using EDD. Prediction method of input parameters impacting of dimensional accuracy of high aspect ratio holes obtained by using EDD.
T. Muthuramalingam, S. Vasanth, L. Ganesh Babu, D. Saravanakumar & P. Karthikeyan. (2019) Flushing Pressure Automation for Efficient Machining in EDM Process. Flushing Pressure Automation for Efficient Machining in EDM Process.
Magdalena Machno. (2019) Impact of Process Parameters on the Quality of Deep Holes Drilled in Inconel 718 Using EDD. Materials 12:14, pages 2298.
Crossref
Crossref
Kashif Ishfaq, Naveed Ahmad, Nadeem Ahmad Mufti, Muhammad Qaiser Saleem & Abdulrahman M. Al-Ahmari. (2019) Abrasive Waterjet Cutting of Clad Composite for Achieving Minimal Cut Quality Difference Between Constituent Layers. Metals 9:7, pages 754.
Crossref
Crossref
Ali Kalyon. (2019) Elektro Erozyon ile İşlemede Yüzey Pürüzlülüğünün ve İş Parçası İşleme Hızının Taguchi Tekniği ile Optimizasyonu. Deu Muhendislik Fakultesi Fen ve Muhendislik 21:62, pages 595-605.
Crossref
Crossref
Jiaofei Huo, Shoufa Liu, Yinwei Wang, T Muthuramalingam & Vu Ngoc Pi. (2019) Influence of process factors on surface measures on electrical discharge machined stainless steel using TOPSIS. Materials Research Express 6:8, pages 086507.
Crossref
Crossref
Mustafa Yılmaz & Muhammed Emre Keskin. (2019) Optimal okuma şartlarının Taguchi yöntemiyle belirlenmesi. Academic Platform Journal of Engineering and Science 7:1, pages 1-1.
Crossref
Crossref
Gurpreet Singh, Sarabjeet Singh Sidhu, Preetkanwal Singh Bains & Amandeep S. Bhui. (2019) Surface evaluation of ED machined 316L stainless steel in TiO2 nano-powder mixed dielectric medium. Materials Today: Proceedings 18, pages 1297-1303.
Crossref
Crossref
Azat Bilal, Muhammad Jahan, Didier Talamona & Asma Perveen. (2018) Electro-Discharge Machining of Ceramics: A Review. Micromachines 10:1, pages 10.
Crossref
Crossref
D. S. Ebenezer Jacob Dhas, C. Velmurugan & K. Leo Dev Wins. (2018) Investigations on the Effect of Tungsten Carbide and Graphite Reinforcements during Spark Erosion Machining of Aluminium Alloy (AA 5052) Hybrid Composite. Silicon 10:6, pages 2769-2781.
Crossref
Crossref
S. Dinesh Kumar & M. Ravichandran. (2018) Synthesis, Characterization and Wire Electric Erosion Behaviour of AA7178-10 wt.% ZrB2 Composite. Silicon 10:6, pages 2653-2662.
Crossref
Crossref
Sundaram Dinesh Kumar & Manickam Ravichandran. (2018)
Synthesis, properties and EDM behavior of 10 wt.-% ZrB
2
reinforced AA7178 matrix composites
. Materials Testing 60:9, pages 877-884.
Crossref
Crossref
G. Rajyalakshmi. (2018) Optimization of WEDM Process Using Taguchi Utility Analysis. Indian Journal of Science and Technology 11:23, pages 1-19.
Crossref
Crossref
Mohammed Naser Farooqui & Nilesh G. Patil. (2018) A perspective on shaping of advanced ceramics by electro discharge machining. Procedia Manufacturing 20, pages 65-72.
Crossref
Crossref
Hongzheng Liu, Zhenlong Wang, Guanxin Chi & Yukui Wang. (2018) Influence of Open-circuit Voltage on Micro Electrical Discharge Machining of Ni-Al 2 O 3 Functionally Graded Materials. Procedia CIRP 68, pages 5-10.
Crossref
Crossref
Ameikav Sharma & Amit Kumar Sinha. (2018) Rotary electric discharge machining of AISI D2 tool steel: present and future scope. Materials Today: Proceedings 5:9, pages 18562-18567.
Crossref
Crossref
L. Selvarajan, J. Rajavel, V. Prabakaran, B. Sivakumar & G. Jeeva. (2018) A Review Paper on EDM Parameter of Composite material and Industrial Demand Material Machining. Materials Today: Proceedings 5:2, pages 5506-5513.
Crossref
Crossref
Sweety Mahanta, M. Chandrasekaran & Sutanu Samanta. (2018) GA based Optimization for the Production of Quality Jobs with Minimum Power Consumption in EDM of Hybrid MMCs. Materials Today: Proceedings 5:2, pages 7788-7796.
Crossref
Crossref
Florian Zeller, Claas Müller, Pilar Miranzo & Manuel Belmonte. (2017) Exceptional micromachining performance of silicon carbide ceramics by adding graphene nanoplatelets. Journal of the European Ceramic Society 37:12, pages 3813-3821.
Crossref
Crossref
Hongzheng Liu, Zhenlong Wang, Yukui Wang & Huichao Li. (2016) Effect of technological parameters on the process performance of pure Al2O3 layer of Ni–Al2O3 FGMs by self-induced EDM. The International Journal of Advanced Manufacturing Technology 90:9-12, pages 3633-3641.
Crossref
Crossref
Yash Pachaury & Puneet Tandon. (2017) An overview of electric discharge machining of ceramics and ceramic based composites. Journal of Manufacturing Processes 25, pages 369-390.
Crossref
Crossref
N. Pragadish & M. Pradeep Kumar. (2016) Optimization of Dry EDM Process Parameters Using Grey Relational Analysis. Arabian Journal for Science and Engineering 41:11, pages 4383-4390.
Crossref
Crossref
Vikas, Supriyo Roy & Kaushik Kumar. 2016. Handbook of Research on Managerial Strategies for Achieving Optimal Performance in Industrial Processes. Handbook of Research on Managerial Strategies for Achieving Optimal Performance in Industrial Processes
518
544
.
Swapnendu Chatterjee, Sourav Barman & Rajat Chakraborty. (2016) Far infrared radiated energy-proficient rapid one-pot green hydrolysis of waste watermelon peel: optimization and heterogeneous kinetics of glucose synthesis. RSC Advances 6:78, pages 74278-74287.
Crossref
Crossref
Feng Yerui, Guo Yongfeng & Li Zongfeng. (2016) Experimental Investigation of EDM Parameters for TiC/Ni Cermet Machining. Procedia CIRP 42, pages 18-22.
Crossref
Crossref
Jianmei Li, Changhou Lu, Aiqun Wang, Yusong Wu, Zhuo Ma, Xinxin Fang & Liang Tao. (2016) Experimental investigation and mathematical modeling of laser marking two-dimensional barcodes on surfaces of aluminum alloy. Journal of Manufacturing Processes 21, pages 141-152.
Crossref
Crossref
Eleonora Ferraris, Jef Vleugels, Yuebin Guo, David Bourell, Jean Pierre Kruth & Bert Lauwers. (2016) Shaping of engineering ceramics by electro, chemical and physical processes. CIRP Annals 65:2, pages 761-784.
Crossref
Crossref
Ravindranadh Bobbili, V. Madhu & A.K. Gogia. (2015) An experimental investigation of wire electrical discharge machining of hot-pressed boron carbide. Defence Technology 11:4, pages 344-349.
Crossref
Crossref
Zhen Zhang, Wuyi Ming, Guojun Zhang, Yu Huang, Xiaoyu Wen & Hao Huang. (2015) A new method for on-line monitoring discharge pulse in WEDM-MS process. The International Journal of Advanced Manufacturing Technology 81:5-8, pages 1403-1418.
Crossref
Crossref
S. Vinoth Kumar & M. Pradeep Kumar. (2015) Machining process parameter and surface integrity in conventional EDM and cryogenic EDM of Al–SiCp MMC. Journal of Manufacturing Processes 20, pages 70-78.
Crossref
Crossref
V Vikram Reddy, P Madar Valli, A Kumar & Ch Sridhar Reddy. (2014) Multi-objective optimization of electrical discharge machining of PH17-4 stainless steel with surfactant-mixed and graphite powder–mixed dielectric using Taguchi-data envelopment analysis–based ranking method. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 229:3, pages 487-494.
Crossref
Crossref
T. Muthuramalingam & B. Mohan. (2014) Application of Taguchi-grey multi responses optimization on process parameters in electro erosion. Measurement 58, pages 495-502.
Crossref
Crossref
Vinoth Kumar. S & Pradeep Kumar. M. (2014) Optimization of cryogenic cooled EDM process parameters using grey relational analysis. Journal of Mechanical Science and Technology 28:9, pages 3777-3784.
Crossref
Crossref
S Rajesh, S Rajakarunakaran & R Sudhkarapandian. (2013) Optimization of the red mud–aluminum composite in the turning process by the Grey relational analysis with entropy. Journal of Composite Materials 48:17, pages 2097-2105.
Crossref
Crossref
Sakip Koksal, Ferit Ficici, Ramazan Kayikci & Omer Savas. (2013)
Experimental optimization in turning of in-situ AlB
2
reinforced AlMg
3
matrix composites produced by centrifugal casting method
. Journal of Composite Materials 48:15, pages 1801-1812.
Crossref
Crossref
Ravindranadh Bobbili, Ashish Paman, V. Madhu & A.K. Gogia. (2014) The effect of impact velocity and target thickness on ballistic performance of layered plates using Taguchi method. Materials & Design 53, pages 719-726.
Crossref
Crossref
Şefika Kasman. (2013) Impact of parameters on the process response: A Taguchi orthogonal analysis for laser engraving. Measurement 46:8, pages 2577-2584.
Crossref
Crossref
Rajiv Kumar Garg & Kuldeep Ojha. (2013) Parametric Optimization of PMEDM Process with Chromium Powder Suspended Dielectric for Triangular Electrodes. Advanced Materials Research 816-817, pages 23-27.
Crossref
Crossref
Sarabjeet Singh Sidhu, Ajay Batish & Sanjeev Kumar. (2013) Fabrication and electrical discharge machining of metal–matrix composites: A review. Journal of Reinforced Plastics and Composites 32:17, pages 1310-1320.
Crossref
Crossref
Shen-Tsu Wang. (2013) Integrating the Taguchi method and the multiattribute decision-making method to optimize the surface mount technology solder paste printing thickness process. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 227:8, pages 1209-1217.
Crossref
Crossref
Andrea Gatto, Elena Bassoli, Lucia Denti & Luca Iuliano. (2013) Bridges of debris in the EDD process: Going beyond the thermo-electrical model. Journal of Materials Processing Technology 213:3, pages 349-360.
Crossref
Crossref
Flaviana Calignano, Lucia Denti, Elena Bassoli, Andrea Gatto & Luca Iuliano. (2012) Studies on electrodischarge drilling of an Al2O3–TiC composite. The International Journal of Advanced Manufacturing Technology.
Crossref
Crossref
Naveen Beri, S. Maheshwari & C. Sharma. (2011) Evaluation of Surface Quality during Electrical Discharge Machining of Inconel 718 with Powder Metallurgy Electrodes. Advanced Materials Research 410, pages 245-248.
Crossref
Crossref
Rajiv Kumar Garg & Kuldeep Ojha. (2011) Parametric Optimization of PMEDM Process with Chromium Powder Suspended Dielectric for Minimum Surface Roughness and Maximum MRR. Advanced Materials Research 383-390, pages 3202-3206.
Crossref
Crossref
T. Yang, Y.-K. Yang & C.-Y. Chen. (2011) Optimization of Injection Molding Process for SGF and PTFE Reinforced PC Composites Using Response Surface Methodology and Simulated Annealing Approach. International Polymer Processing 26:5, pages 525-539.
Crossref
Crossref
R J Ji, Y H Liu, Y Z Zhang, H Li & X D Cheng. (2010) Machining Performance and Surface Integrity of SiC Ceramic Machined Using Electrical Discharge Milling and the Mechanical Grinding Compound Process. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 224:10, pages 1511-1518.
Crossref
Crossref