Citations (62)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (13)
Vaibhav Srivastava & Manish Gupta. (2023) Design and prediction of healing assessment for AA2014-Nitinol strip-Solder alloy based hybrid self-healing composite structure via Taguchi analysis and fuzzy logic approach. Mechanics of Advanced Materials and Structures 30:20, pages 4196-4215.
Read now
Read now
S. Baskar, G. Sriram & S. Arumugam. (2018) Fuzzy logic model to predict oil-film pressure in a hydrodynamic journal bearing lubricated under the influence of nano-based bio-lubricants. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects 40:13, pages 1583-1590.
Read now
Read now
Karanbir Singh, Tarun Nanda & Rajeev Mehta. (2018) Processing of polyethylene terephthalate fiber reinforcement to improve compatibility with constituents of GFRP nanocomposites. Materials and Manufacturing Processes 33:2, pages 165-173.
Read now
Read now
Priyanka Devi Pantula, Srinivas Soumitri Miriyala & Kishalay Mitra. (2017) KERNEL: Enabler to build smart surrogates for online optimization and knowledge discovery. Materials and Manufacturing Processes 32:10, pages 1162-1171.
Read now
Read now
M. Mudhukrishnan, P. Hariharan, K. Palanikumar & B. Latha. (2017) Tool materials influence on surface roughness and oversize in machining glass fiber reinforced polypropylene (GFR-PP) composites. Materials and Manufacturing Processes 32:9, pages 988-997.
Read now
Read now
Amitava Mandal, Amit Rai Dixit, Alok Kumar Das & Niladri Mandal. (2016) Modeling and Optimization of Machining Nimonic C-263 Superalloy using Multicut Strategy in WEDM. Materials and Manufacturing Processes 31:7, pages 860-868.
Read now
Read now
Dhiraj Kumar, K. K. Singh & Redouane Zitoune. (2016) Experimental investigation of delamination and surface roughness in the drilling of GFRP composite material with different drills. Advanced Manufacturing: Polymer & Composites Science 2:2, pages 47-56.
Read now
Read now
P. Chockalingam, Kok
Chee Kuang & Thoguluva
Raghavan Vijayaram. (2013) Effects of Grinding Process Parameters and Coolants on the Grindability of GFRP Laminates. Materials and Manufacturing Processes 28:10, pages 1071-1076.
Read now
Read now
Uğur Köklü. (2013) Optimisation of machining parameters in interrupted cylindrical grinding using the Grey-based Taguchi method. International Journal of Computer Integrated Manufacturing 26:8, pages 696-702.
Read now
Read now
R. Venkata Rao & V.D. Kalyankar. (2012) Parameter Optimization of Machining Processes Using a New Optimization Algorithm. Materials and Manufacturing Processes 27:9, pages 978-985.
Read now
Read now
T. Rajmohan & K. Palanikumar. (2012) Optimization of Machining Parameters for Surface Roughness and Burr Height in Drilling Hybrid Composites. Materials and Manufacturing Processes 27:3, pages 320-328.
Read now
Read now
S. Kumar, S.R. Chauhan, P.K. Rakesh, I. Singh & J.P. Davim. (2012) Drilling of Glass Fiber/Vinyl Ester Composites with Fillers. Materials and Manufacturing Processes 27:3, pages 314-319.
Read now
Read now
K. Palanikumar, B. Latha, V.S. Senthilkumar & J.
Paulo Davim. (2012) Analysis on Drilling of Glass Fiber–Reinforced Polymer (GFRP) Composites Using Grey Relational Analysis. Materials and Manufacturing Processes 27:3, pages 297-305.
Read now
Read now
Articles from other publishers (49)
Mahmoud M. A. Nassar, Khalid I. Alzebdeh, Mahmoud M. M. Alsafy & Sujan Piya. (2023) Optimizing drilling parameters for minimizing delamination in polypropylene-date palm fiber bio-composite materials. Journal of the Brazilian Society of Mechanical Sciences and Engineering 45:11.
Crossref
Crossref
Sarower Kabir, Faiz Ahmad, Chowdhury Ahmed Shahed & Ebru Gunister. (2023) Influence of Drilling Parameters on the Delamination and Surface Roughness of Insulative-Coated Glass/Carbon-Hybrid Composite. Advances in Polymer Technology 2023, pages 1-15.
Crossref
Crossref
Gennaro Salvatore Ponticelli, Simone Venettacci, Oliviero Giannini, Stefano Guarino & Matthias Horn. (2022) Fuzzy process optimization of laser powder bed fusion of 316L stainless steel. Progress in Additive Manufacturing 8:3, pages 437-458.
Crossref
Crossref
Snobin Mathew & K. Shunmugesh. (2023) Application of grey-fuzzy logic for the optimization of drilling parameters for coir fibre reinforced composite. Materials Today: Proceedings 72, pages 2082-2088.
Crossref
Crossref
Slavica Prvulovic, Predrag Mosorinski, Dragica Radosav, Jasna Tolmac, Milica Josimovic & Vladimir Sinik. (2022) Determination of the temperature in the cutting zone while processing machine plastic using fuzzy-logic controller (FLC). Ain Shams Engineering Journal 13:3, pages 101624.
Crossref
Crossref
Sangeetha Elango, Kaviarasan Varadaraju, Elango Natarajan, Ezra Morris Abraham Gnanamuthu, R. Durairaj & P. Mariappan. (2022) PTFE in Wet and Dry Drilling: Two-Tier Modeling and Optimization through ANFIS. Mathematical Problems in Engineering 2022, pages 1-10.
Crossref
Crossref
Zhiqi Wang, Tingting Ji, Zhengyu Zhu, Peng Mei, Weian Guo & Yongmei Li. (2022) Optimization of the Anaerobic-Anoxic-Oxic Process by Integrating ASM2d with Pareto Analysis of Variance and Response Surface Methodology. Water 14:6, pages 940.
Crossref
Crossref
Nehal Dash, Sanghamitra Debta & Kaushik Kumar. 2022. Research Anthology on Artificial Neural Network Applications. Research Anthology on Artificial Neural Network Applications
804
823
.
P Devendran & P Ashoka Varthanan. (2021) Prediction of weldment mechanical properties in GMAW with robot-assisted using fuzzy logic systems. Materials Research Express 8:12, pages 126524.
Crossref
Crossref
U. Hari Babu, N. Vijaya Sai & Ranjeet Kumar Sahu. (2020) Artificial Intelligence System Approach for Optimization of Drilling Parameters of Glass-Carbon Fiber/Polymer Composites. Silicon 13:9, pages 2943-2957.
Crossref
Crossref
Muhammad Mukhtar Liman, Khaled Abou-El-Hossein & Lukman Niyi Abdulkadir. (2019) Fuzzy logic-based modeling and analysis of surface roughness, electrostatic charge, and material removal rate in ultrahigh precision diamond turning of rigid contact lens polymer. Journal of Thermoplastic Composite Materials 34:7, pages 952-976.
Crossref
Crossref
Daniel René Tasé Velázquez, André Luís Helleno, Hipólito Carvajal Fals & Raphael Galdino dos Santos. (2021) Prediction of geometrical characteristics and process parameter optimization of laser deposition AISI 316 steel using fuzzy inference. The International Journal of Advanced Manufacturing Technology 115:5-6, pages 1547-1564.
Crossref
Crossref
Muhammad Helmi Abdul Kudus, Mani Maran Ratnam & Hazizan Md. Akil. (2020) Factors affecting hole quality during drilling of natural fiber-reinforced composites: A comprehensive review. Journal of Reinforced Plastics and Composites 40:9-10, pages 391-405.
Crossref
Crossref
Asim Ahmad Riaz, Riaz Muhammad, Naveed Ullah, Ghulam Hussain, Mohammed Alkahtani & Waseem Akram. (2021) Fuzzy Logic-Based Prediction of Drilling-Induced Temperatures at Varying Cutting Conditions along with Analysis of Chips Morphology and Burrs Formation. Metals 11:2, pages 277.
Crossref
Crossref
M S Sureshkumar, S Krishna Prasath, C Lokeshkumar & S Loheshwaranath. (2021) Effect of Vibration on Surface Roughness of Drilling on Glass Fiber Reinforced Plastic. IOP Conference Series: Materials Science and Engineering 1012:1, pages 012035.
Crossref
Crossref
N. Nandakumar, T. Allwin Raja & P. Arunkumar. 2021. Advances in Materials Research. Advances in Materials Research
165
173
.
Ilesanmi Daniyan, Festus Fameso, Felix Ale, Kazeem Bello & Isaac Tlhabadira. (2020) Modelling, simulation and experimental validation of the milling operation of titanium alloy (Ti6Al4V). The International Journal of Advanced Manufacturing Technology 109:7-8, pages 1853-1866.
Crossref
Crossref
Muhammad Aamir, Shanshan Tu, Majid Tolouei-Rad, Khaled Giasin & Ana Vafadar. (2020) Optimization and Modeling of Process Parameters in Multi-Hole Simultaneous Drilling Using Taguchi Method and Fuzzy Logic Approach. Materials 13:3, pages 680.
Crossref
Crossref
Hari Babu Upputuri, Vijaya Sai Nimmagadda & Elayaraja Duraisamy. (2020) Optimization of drilling parameters on carbon fiber reinforced polymer composites using fuzzy logic. Materials Today: Proceedings 23, pages 528-535.
Crossref
Crossref
B. Satheesh Kumar, Neelam Parimala & P. Vamsi Krishna. 2020. Advances in Applied Mechanical Engineering. Advances in Applied Mechanical Engineering
1147
1158
.
M Mudhukrishnan, P Hariharan, K Palanikumar & B Latha. (2018) Optimization and sensitivity analysis of drilling parameters for sustainable machining of carbon fiber–reinforced polypropylene composites. Journal of Thermoplastic Composite Materials 32:11, pages 1485-1508.
Crossref
Crossref
Dhiraj Kumar & KK Singh. (2017) Investigation of delamination and surface quality of machined holes in drilling of multiwalled carbon nanotube doped epoxy/carbon fiber reinforced polymer nanocomposite. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 233:4, pages 647-663.
Crossref
Crossref
K. Ananthakumar & S. Kumaran. (2018) Fuzzy Logic Model System for Prediction of Process Parameters by Plasma Assisted Diffusion Bonding of Dissimilar Alloys. Experimental Techniques 43:1, pages 105-115.
Crossref
Crossref
K. Siva Prasad & G. Chaitanya. (2019) Analysis of delamination in drilling of GFRP composites using Taguchi Technique. Materials Today: Proceedings 18, pages 3252-3261.
Crossref
Crossref
Narinder Singh, Rupinder Singh & I P S Ahuja. (2018) On Development of Functionally Graded Material Through Fused Deposition Modelling Assisted Investment Casting from Al2O3/SiC Reinforced Waste Low Density Polyethylene. Transactions of the Indian Institute of Metals 71:10, pages 2479-2485.
Crossref
Crossref
Kalyan Kumar Singh & Dhiraj Kumar. (2016) Experimental investigation and modelling of drilling on multi-wall carbon nanotube–embedded epoxy/glass fabric polymeric nanocomposites. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 232:11, pages 1943-1959.
Crossref
Crossref
Ya I Soler, V M Salov & Chi Kien Nguyen. (2018) Sparking-out optimization while surface grinding aluminum alloy 1933T2 parts using fuzzy logic. IOP Conference Series: Materials Science and Engineering 327, pages 042122.
Crossref
Crossref
Nehal Dash, Sanghamitra Debta & Kaushik Kumar. 2018. Handbook of Research on Emergent Applications of Optimization Algorithms. Handbook of Research on Emergent Applications of Optimization Algorithms
386
406
.
D. Rajamani, Balasubramanian Esakki, P. Arunkumar & R. Velu. (2018) Fuzzy Logic-Based Expert System for Prediction of Wear Rate in Selective Inhibition Sintered HDPE Parts. Materials Today: Proceedings 5:2, pages 6072-6081.
Crossref
Crossref
D. Rajamani, Balasubramanian Esakki & P. Arunkumar. (2018) A Study On Dimensional Accuracy Of Selective Inhibition Sintered HDPE Parts Using Fuzzy Logic. Materials Today: Proceedings 5:2, pages 3817-3824.
Crossref
Crossref
S Rajesh, M Pethuraj, S Thirumalai Kumaran, M Uthayakumar & N Rajini. (2015) Some studies on drilling of red mud reinforced aluminum composite. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 231:4, pages 382-393.
Crossref
Crossref
Supriyo Roy, J. Paulo Davim & Kaushik Kumar. 2017. Mathematical Concepts and Applications in Mechanical Engineering and Mechatronics. Mathematical Concepts and Applications in Mechanical Engineering and Mechatronics
67
93
.
Emel Kuram & Babur Ozcelik. (2014) Micro-milling performance of AISI 304 stainless steel using Taguchi method and fuzzy logic modelling. Journal of Intelligent Manufacturing 27:4, pages 817-830.
Crossref
Crossref
Rupesh Kumar Pandey & S. S. Panda. (2013) Optimization of bone drilling using Taguchi methodology coupled with fuzzy based desirability function approach. Journal of Intelligent Manufacturing 26:6, pages 1121-1129.
Crossref
Crossref
Huaizhong Li & Yun Chen. 2015. Handbook of Manufacturing Engineering and Technology. Handbook of Manufacturing Engineering and Technology
941
979
.
Rupesh Kumar Pandey & Sudhansu Sekhar Panda. (2014) A feasibility investigation for modeling and optimization of temperature in bone drilling using fuzzy logic and Taguchi optimization methodology. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine 228:11, pages 1135-1145.
Crossref
Crossref
Bakthavachalu Balamugundan & Loganathan Karthikeyan. (2014) Optimization of Process Parameters during Milling of Friction Stir Processed GFRP Composites. Advanced Materials Research 984-985, pages 297-303.
Crossref
Crossref
İ. Asiltürk. (2014) Application of Artificial Intelligent to Predict Surface Roughness. Experimental Techniques 38:4, pages 54-60.
Crossref
Crossref
Vikas Sharma, Vinod Kumar & Harmesh Kumar. 2014. Nanotechnology. Nanotechnology
1140
1150
.
Erfan Zalnezhad & Ahmed Aly Diaa Mohammed Sarhan. 2014. Transactions on Engineering Technologies. Transactions on Engineering Technologies
291
304
.
Huaizhong Li & Yun Chen. 2013. Handbook of Manufacturing Engineering and Technology. Handbook of Manufacturing Engineering and Technology
1
33
.
Sureshkumar Manickam Shanmugasundaram, Lakshmanan Damodhiran, Vignesh Billan & Dhinakaran Gu. (2013) Predictive Model for Circularity Error of Drilling on GFRP Composite Laminates Using Fuzzy Logic. Applied Mechanics and Materials 446-447, pages 316-320.
Crossref
Crossref
E. Zalnezhad, Ahmed A. D. Sarhan & M. Hamdi. (2013) Fretting fatigue life evaluation of multilayer Cr–CrN-coated Al7075-T6 with higher adhesion strength—fuzzy logic approach. The International Journal of Advanced Manufacturing Technology 69:5-8, pages 1153-1164.
Crossref
Crossref
T. Rajmohan, K. Palanikumar & S. Prakash. (2013) Grey-fuzzy algorithm to optimise machining parameters in drilling of hybrid metal matrix composites. Composites Part B: Engineering 50, pages 297-308.
Crossref
Crossref
Vikas Sharma, Vinod Kumar & Harmesh Kumar. (2013) Effects of Different Parameters on Delamination Factor of Glass Fiber Reinforced Plastic (GFRP). International Journal of Manufacturing, Materials, and Mechanical Engineering 3:2, pages 17-31.
Crossref
Crossref
Erfan Zalnezhad, Ahmed Aly Diaa Mohammed Sarhan & Mohd Hamdi. (2013) Surface hardness prediction of CrN thin film coating on AL7075-T6 alloy using fuzzy logic system. International Journal of Precision Engineering and Manufacturing 14:3, pages 467-473.
Crossref
Crossref
Rupesh Kumar Pandey & S.S. Panda. (2012) Modeling of Temperature in Orthopaedic Drilling Using Fuzzy Logic. Applied Mechanics and Materials 249-250, pages 1313-1318.
Crossref
Crossref
İlhan Asiltürk & Süleyman Neşeli. (2012) Multi response optimisation of CNC turning parameters via Taguchi method-based response surface analysis. Measurement 45:4, pages 785-794.
Crossref
Crossref
T.V. Rajamurugan, K. Shanmugam, S. Rajakumar & K. Palanikumar. (2012) Modelling and Analysis of Thrust Force in Drilling of GFRP Composites Using Response Surface Methodology (RSM). Procedia Engineering 38, pages 3757-3768.
Crossref
Crossref