Citations (26)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (11)
Karan Pawar, Harsha S & Pradeep Dixit. (2023) Investigation of Cu-Sn-Cu transient liquid phase bonding for microsystems packaging. Materials and Manufacturing Processes 38:3, pages 284-294.
Read now
Read now
Chengcong Zhang & Amir A. Shirzadi. (2021) Diffusion bonding of copper alloy to nickel-based superalloy: effect of heat treatment on the microstructure and mechanical properties of the joints. Science and Technology of Welding and Joining 26:3, pages 213-219.
Read now
Read now
Sergey V. Prikhodko, Dmytro G. Savvakin, Pavlo E. Markovsky, Olexander O. Stasuk, James Penney, Amir A. Shirzadi, Peter D. Davies & Helen M. Davies. (2020) Diffusion bonding of TiC or TiB reinforced Ti–6Al–4V matrix composites to conventional Ti–6Al–4V alloy. Science and Technology of Welding and Joining 25:6, pages 518-524.
Read now
Read now
Fabio Scherillo, Antonello Astarita, Umberto Prisco & Antonino Squillace. (2018) Selective electrochemical machining of the steel molds in hot isostatic pressing of Ti6Al4V powder. Materials and Manufacturing Processes 33:14, pages 1587-1593.
Read now
Read now
Antonello Astarita, Fabio Scherillo, Michele Curioni, Paolo Aprea, Filomena Impero, Antonino Squillace & Xiaorong Zhou. (2016) Study of the Linear Friction Welding Process of Dissimilar Ti-6Al-4V–Stainless Steel Joints. Materials and Manufacturing Processes 31:16, pages 2115-2122.
Read now
Read now
Kun Liu, Yajiang Li & Juan Wang. (2016) Improving the Interfacial Microstructure Evolution of Ti/Stainless Steel GTA Welding Joint by Employing Cu Filler Metal. Materials and Manufacturing Processes 31:16, pages 2165-2173.
Read now
Read now
S. Suresh Kumar & B. Ravisankar. (2016) An Evaluation of Quality of Joints of Two Dissimilar Metals by Diffusion Bonding using Ultrasonic C Scan. Materials and Manufacturing Processes 31:16, pages 2084-2090.
Read now
Read now
A. J. Jegadeesan, L. Karunamoorhty & N. Arunkumar. (2015) Investigation of Hot-Staking Process Parameters and Evolution of Improvement in Joint Strength. Materials and Manufacturing Processes 30:2, pages 155-161.
Read now
Read now
M. Taouinet, N.E. Kamel & S. Lebaili. (2013) Diffusion Bonding Between Zircaloy-4 and 304L Stainless Steel in the Presence of a Eutectic. Materials and Manufacturing Processes 28:12, pages 1327-1334.
Read now
Read now
Ayse Celik Bedeloglu & Nilsen Sunter. (2013) Investigation of Polyacrylic/Metal Wire Composite Yarn Characteristics Manufactured on Fancy Yarn Machine. Materials and Manufacturing Processes 28:6, pages 650-656.
Read now
Read now
Hongxin Shi, Shuang Qiao, Ranfeng Qiu, Xiaojiao Zhang & Hua Yu. (2012) Effect of Welding Time on the Joining Phenomena of Diffusion Welded Joint between Aluminum Alloy and Stainless Steel. Materials and Manufacturing Processes 27:12, pages 1366-1369.
Read now
Read now
Articles from other publishers (15)
Dejun Gao, Chun Li, Chenghao Zhang, Bo Yang, Tong Lin, Lei Chen, Xiaoqing Si, Junlei Qi & Jian Cao. (2023) Microstructure and wettability of the micro-laminated Ti6Al4V/304 stainless steel composite fabricated by diffusion bonding. Journal of Materials Research and Technology 27, pages 3788-3796.
Crossref
Crossref
Nana Tian, Conglin Zhang, Peng Lyu, Jintong Guan, Chingtun Peng, Jie Cai & Qingfeng Guan. (2023) Impact of high-current pulsed electron beam modification on element diffusion and performance of Ti6Al4V/AISI 316 L stainless steel diffusion bonded joints. Materials Characterization 204, pages 113163.
Crossref
Crossref
J.-M. Auger, D. Cotton, C. Nouveau, A. Besnard, F. Bernard, M.-R. Ardigo-Besnard, J.-P. Monchoux, R. Cours & C. Marcelot. (2023) Comparison of thermal diffusion and interfacial reactions for bulk and sputtered titanium on 316L stainless steel. Materials Chemistry and Physics 306, pages 128013.
Crossref
Crossref
Duradundi Sawant Badkar. 2023. Recent Advances in Materials and Manufacturing Technology. Recent Advances in Materials and Manufacturing Technology
981
994
.
Yeongseok Lim, Yoshiaki Morisada, Huihong Liu & Hidetoshi Fujii. (2021) Ti-6Al-4V/SUS316L dissimilar joints with ultrahigh joint efficiency fabricated by a novel pressure-controlled joule heat forge welding method. Journal of Materials Processing Technology 298, pages 117283.
Crossref
Crossref
Pengxian Zhang, Zhizhong Fang & Shilong Li. (2021) Microstructure and Interfacial Reactions of Resistance Brazed Lap Joints between TC4 Titanium Alloy and 304 Stainless Steel Using Metal Powder Interlayers. Materials 14:1, pages 180.
Crossref
Crossref
Satish Namdev, Anand Pandey, Arun Kumar Pandey, Rakesh Kumar & Ashish Goyal. 2021. Optimization Methods in Engineering. Optimization Methods in Engineering
291
302
.
Duradundi Sawant Badkar. (2020) Study on Hardness and Microstructural Properties of Ti-6Al-4V Alloy using Overlapped Multipass Laser Transformation Hardening under Optimized Test Conditions. Journal of Surface Science and Technology.
Crossref
Crossref
Gang Mou, Xueming Hua, Min Wang & Fang Li. (2019) Effects of Ni addition on removing Fe-Ti intermetallic compounds in cold metal transfer arc-brazed TC4/304L dissimilar joints. Journal of Manufacturing Processes 38, pages 104-112.
Crossref
Crossref
Gaurav Sharma & Dheerendra Kumar Dwivedi. (2017) Effect of pressure pulsation on bond interface characteristics of 409 ferritic stainless steel diffusion bonds. Vacuum 146, pages 152-158.
Crossref
Crossref
Gopinath THIRUNAVUKARASU, Subrata CHATTERJEE & Sukumar KUNDU. (2017) Scope for improved properties of dissimilar joints of ferrous and non-ferrous metals. Transactions of Nonferrous Metals Society of China 27:7, pages 1517-1529.
Crossref
Crossref
Eric Eckstein, Michael C. Halbig & Paul Weaver. (2016) Thermally-Driven Morphing with High Temperature Composites. Thermally-Driven Morphing with High Temperature Composites.
Chang Hee Lee, Jeong Seok Seo & Dong Sam Park. (2014) Design and Tuning of the Ultrasonic Wide-Blade Horn for Joining and Cutting Non-Woven Fabrics. Advanced Materials Research 941-944, pages 1932-1936.
Crossref
Crossref
Arun Kumar Pandey & Avanish Kumar Dubey. (2013) Modeling and optimization of kerf taper and surface roughness in laser cutting of titanium alloy sheet. Journal of Mechanical Science and Technology 27:7, pages 2115-2124.
Crossref
Crossref
X. P. Fan, B. Feng, Y. L. Di, J. X. Wang, X. Lu & J. Weng. (2012) Graded porous titanium scaffolds fabricated using powder metallurgy technique. Powder Metallurgy and Metal Ceramics 51:5-6, pages 372-377.
Crossref
Crossref