Citations (60)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (15)
Pankaj Sonia, Jinesh Kumar Jain & Kuldeep Kumar Saxena. (2021) Influence of ultrasonic vibration assistance in manufacturing processes: A Review. Materials and Manufacturing Processes 36:13, pages 1451-1475.
Read now
Read now
Ngoc-Hung Chu, Van-Du Nguyen & Quoc-Huy Ngo. (2020) Machinability enhancements of ultrasonic-assisted deep drilling of aluminum alloys. Machining Science and Technology 24:1, pages 112-135.
Read now
Read now
Saeid Amini, Alireza Bagheri & Reza Teimouri. (2018) Ultrasonic-assisted ball burnishing of aluminum 6061 and AISI 1045 steel. Materials and Manufacturing Processes 33:11, pages 1250-1259.
Read now
Read now
Xue-Hui Shen & Guo-Feng Xu. (2018) Study of milling force variation in ultrasonic vibration-assisted end milling. Materials and Manufacturing Processes 33:6, pages 644-650.
Read now
Read now
Mohammad Lotfi, Saeid Amini, Reza Teimouri & Mahnoush Alinaghian. (2017) Built-up edge reduction in drilling of AISI 1045 steel. Materials and Manufacturing Processes 32:6, pages 623-630.
Read now
Read now
Saeid Amini, Meysam Soleimani, Hossein Paktinat & Mohammad Lotfi. (2017) Effect of longitudinal−torsional vibration in ultrasonic-assisted drilling. Materials and Manufacturing Processes 32:6, pages 616-622.
Read now
Read now
Huan Li, Bin Lin, Shumin Wan, Yan Wang & Xiaofeng Zhang. (2016) An Experimental Investigation on Ultrasonic Vibration-Assisted Grinding of SiO2f/SiO2 Composites. Materials and Manufacturing Processes 31:7, pages 887-895.
Read now
Read now
J. A. Travieso-Rodriguez, G. Gómez Gras, J. Jorba Peiró, F. Carrillo, G. Dessein, J. Alexis & H. González Rojas. (2015) Experimental Study on the Mechanical Effects of the Vibration-Assisted Ball-Burnishing Process. Materials and Manufacturing Processes 30:12, pages 1490-1497.
Read now
Read now
Chil-Chyuan Kuo & Ying-Jie Wang. (2014) Development of a Micro-Hot-Embossing Mold with High Replication Fidelity Using Surface Modification. Materials and Manufacturing Processes 29:9, pages 1101-1110.
Read now
Read now
Chil-Chyuan Kuo & Hsin-You Liao. (2014) Enhancing the Mechanical Properties of Epoxy Resin Mold by Adding Zirconia Particles. Materials and Manufacturing Processes 29:7, pages 840-847.
Read now
Read now
S. Amini & M. Kazemiyoun. (2014) Effect of Ultrasonic Vibrations on Chip–Tool Contact Zone in Turning of AISI304. Materials and Manufacturing Processes 29:5, pages 627-633.
Read now
Read now
S. Amini & N. Mohagheghian. (2014) Vibratory Rotary Turning Process of Al 7075 Workpiece. Materials and Manufacturing Processes 29:3, pages 344-349.
Read now
Read now
S. Amini, M.R. Khosrojerdi, R. Nosouhi & S. Behbahani. (2014) An Experimental Investigation on the Machinability of Al2O3 in Vibration-Assisted Turning Using PCD Tool. Materials and Manufacturing Processes 29:3, pages 331-336.
Read now
Read now
Chil-Chyuan Kuo & Hsiu-Ju Hsu. (2013) Development and Application of Hybrid Mold with Microfeatures in Micro-Hot Embossing. Materials and Manufacturing Processes 28:11, pages 1203-1208.
Read now
Read now
Chil-Chyuan Kuo & Hsiu-Ju Hsu. (2013) Micro-Hot Embossing of Fresnel Lens Using Precision Micro-Featured Mold. Materials and Manufacturing Processes 28:11, pages 1228-1233.
Read now
Read now
Articles from other publishers (45)
Mohammad Reza Chalak Qazani, Saeid Amini, Siamak Pedrammehr, Mohammad Baraheni & Adeel H. Suhail. (2023) A machine learning method for cutting parameter selection in rotary ultrasonic-assisted end grinding. The International Journal of Advanced Manufacturing Technology 126:3-4, pages 1577-1591.
Crossref
Crossref
Guangjun Chen, Jinkai Xu, Jingdong Wang, Ying Li, Jiaqi Wang & Huadong Yu. (2022) Experimental investigation on cavitation effect and surface quality of ultrasonic-assisted micro-hole drilling. The International Journal of Advanced Manufacturing Technology 121:1-2, pages 919-936.
Crossref
Crossref
Chunhao Wang, Pengnan Li, Shujian Li, Xinyi Qiu, Qiulin Niu, Changping Li & Tae Jo Ko. (2021) Influence of longitudinal-torsional ultrasonic vibration on drilling carbon fiber-reinforced polymer composite. The International Journal of Advanced Manufacturing Technology 119:9-10, pages 6849-6862.
Crossref
Crossref
Malkeet Singh, Sahil Dhiman, Harpreet Singh & Christopher Charles Berndt. (2021) Assessment of positional error and hole quality during vibration-based drilling of aerospace alloy. Journal of Mechanical Science and Technology 35:12, pages 5621-5630.
Crossref
Crossref
Jorge Salguero, Irene Del Sol, Alvaro Gomez-Parra & Moises Batista. 2021. Advanced Aluminium Composites and Alloys. Advanced Aluminium Composites and Alloys.
Guangjun Chen, Jinkai Xu, Zhongxu Lian, Jiaqi Wang, Ying Li, Jingdong Wang & Huadong Yu. (2021) Study on the amplitude effect on micro-hole drilling of AISI 4340 by ultrasonic vibration. The International Journal of Advanced Manufacturing Technology 116:7-8, pages 2437-2453.
Crossref
Crossref
Yahui Hu, Zhenhao Fan, Huaiyu Zhang, Chunqiu Zhang & Weihua Fu. (2020) Surface quality and pullout strength of ultrasonically-assisted drilling cortical bone. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine 235:4, pages 378-388.
Crossref
Crossref
Asim Ahmad Riaz, Riaz Muhammad, Naveed Ullah, Ghulam Hussain, Mohammed Alkahtani & Waseem Akram. (2021) Fuzzy Logic-Based Prediction of Drilling-Induced Temperatures at Varying Cutting Conditions along with Analysis of Chips Morphology and Burrs Formation. Metals 11:2, pages 277.
Crossref
Crossref
M. A. Moghaddas. (2021) Modeling and optimization of thrust force, torque, and surface roughness in ultrasonic-assisted drilling using surface response methodology. The International Journal of Advanced Manufacturing Technology 112:9-10, pages 2909-2923.
Crossref
Crossref
Farzad Pashmforoush, Zinati FarshbafRezaReza & Asghar Dadashzadeh. (2021) Ultrasonic-assisted drilling of laminated aluminum 2024 metal matrix composite reinforced with SiC nanoparticles: Experimental investigation and grey relational optimization. FME Transactions 49:2, pages 401-413.
Crossref
Crossref
Muhammad Aamir, Khaled Giasin, Majid Tolouei-Rad & Ana Vafadar. (2020) A review: drilling performance and hole quality of aluminium alloys for aerospace applications. Journal of Materials Research and Technology 9:6, pages 12484-12500.
Crossref
Crossref
Farzad Pashmforoush, Reza Farshbaf Zinati & Davoud Maleki. (2020) Investigation of ultrasonic vibration on thrust force, surface integrity, and geometrical tolerances during drilling of natural filler reinforced composites. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 234:20, pages 4041-4055.
Crossref
Crossref
Li Shaomin, Zhang Deyuan, Liu yanqiang, Liu chunjian, Tang Hui & Ma guang. (2020) A self-adaption normal direction and active variable stiffness low-frequency vibration-assisted system for curved surface drilling. Precision Engineering 64, pages 307-318.
Crossref
Crossref
Peng Wang & Dazhong Wang. (2019) Study on ultrasonic-assisted drilling of Ti6Al4V using 3-flute drill in the finite element simulation. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 234:7, pages 1298-1310.
Crossref
Crossref
Lei Wei & Dazhong Wang. (2019) Effect of ultrasound-assisted vibration on Ti-6Al-4V/Al2024-T351 laminated material processing with geometric tools. The International Journal of Advanced Manufacturing Technology 106:1-2, pages 219-232.
Crossref
Crossref
Mohammad Baraheni & Saeid Amini. (2019) Comprehensive optimization of process parameters in rotary ultrasonic drilling of CFRP aimed at minimizing delamination. International Journal of Lightweight Materials and Manufacture 2:4, pages 379-387.
Crossref
Crossref
Mohammad Baraheni & Saeid Amini. (2019) Investigation on rotary ultrasonic assisted end grinding of silicon nitride ceramics. SN Applied Sciences 1:12.
Crossref
Crossref
Shuo Chen, Ping Zou, Yingjian Tian, Jingwei Duan & Wenjie Wang. (2019) Study on modal analysis and chip breaking mechanism of Inconel 718 by ultrasonic vibration-assisted drilling. The International Journal of Advanced Manufacturing Technology 105:1-4, pages 177-191.
Crossref
Crossref
Mohammad Baraheni, Ali Tabatabaeian, Saeid Amini & Ahmad Reza Ghasemi. (2019) Parametric analysis of delamination in GFRP composite profiles by performing rotary ultrasonic drilling approach: Experimental and statistical study. Composites Part B: Engineering 172, pages 612-620.
Crossref
Crossref
Shuo Chen, Ping Zou, Hao Wu, Di Kang & Wenjie Wang. (2019) Mechanism of chip formation in ultrasonic vibration drilling and experimental research. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 233:15, pages 5214-5226.
Crossref
Crossref
Reza Teimouri & Saeid Amini. (2017) Analytical and experimental approaches to study elastic deflection of thin strip in ultrasonic-assisted drilling process. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering 233:1, pages 21-34.
Crossref
Crossref
Ngoc-Hung Chu, Dang-Binh Nguyen, Nhu-Khoa Ngo, Van-Du Nguyen, Minh-Duc Tran, Ngoc-Pi Vu, Quoc-Huy Ngo & Thi-Hong Tran. (2018) A New Approach to Modelling the Drilling Torque in Conventional and Ultrasonic Assisted Deep-Hole Drilling Processes. Applied Sciences 8:12, pages 2600.
Crossref
Crossref
Qingchun Zheng, Lei Xia, Xu Zhang, Chunqiu Zhang & Yahui Hu. (2018) Reduction thermal damage to cortical bone using ultrasonically-assisted drilling. Technology and Health Care 26:5, pages 843-856.
Crossref
Crossref
Saeid Amini, Mohammad Baraheni & Alireza Mardiha. (2017) Parametric investigation of rotary ultrasonic drilling of carbon fiber reinforced plastics. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering 232:5, pages 540-554.
Crossref
Crossref
Hossein Paktinat & Saeid Amini. (2018) Experiments and Finite Element Simulation of Ultrasonic Assisted Drilling. Journal of Manufacturing Science and Engineering 140:10.
Crossref
Crossref
Ngoc-Hung Chu, Van-Du Nguyen & The-Vinh Do. (2018) Ultrasonic-Assisted Cutting: A Beneficial Application for Temperature, Torque Reduction, and Cutting Ability Improvement in Deep Drilling of Al-6061. Applied Sciences 8:10, pages 1708.
Crossref
Crossref
M. A. Moghaddas, M. A. Short, N. R. Wiley, A. Y. Yi & K. F. Graff. (2018) Improving Productivity in an Ultrasonic-Assisted Drilling Vertical Machining Center. Journal of Manufacturing Science and Engineering 140:6.
Crossref
Crossref
Mohammad Lotfi, Saeid Amini & Ihsan Yaseen Al-Awady. (2018) 3D numerical analysis of drilling process: heat, wear, and built-up edge. Advances in Manufacturing 6:2, pages 204-214.
Crossref
Crossref
Chil-Chyuan Kuo & Shin-Yun Lyu. (2017) A cost-effective approach using recycled materials to fabricate micro-hot embossing dies for microfabrication. The International Journal of Advanced Manufacturing Technology 94:9-12, pages 4365-4371.
Crossref
Crossref
Hossein Paktinat & Saeid Amini. (2017) Numerical and experimental studies of longitudinal and longitudinal-torsional vibrations in drilling of AISI 1045. The International Journal of Advanced Manufacturing Technology 94:5-8, pages 2577-2592.
Crossref
Crossref
Saeid Amini & Reza Teimouri. (2016) Parametric study and multicharacteristic optimization of rotary turning process assisted by longitudinal ultrasonic vibration. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering 231:5, pages 978-991.
Crossref
Crossref
Hossein Paktinat & Saeid Amini. (2017) Ultrasonic assistance in drilling: FEM analysis and experimental approaches. The International Journal of Advanced Manufacturing Technology 92:5-8, pages 2653-2665.
Crossref
Crossref
Chil-Chyuan Kuo & Shin-Yun Lyu. (2016) Development of low-cost hot embossing stamps with long life span and environmental protection. The International Journal of Advanced Manufacturing Technology 91:5-8, pages 1889-1895.
Crossref
Crossref
Chil-Chyuan Kuo & Teng-Sheng Chiang. (2016) Development of a precision hot embossing tool with microstructures for microfabrication. The International Journal of Advanced Manufacturing Technology 91:1-4, pages 1321-1326.
Crossref
Crossref
Saeid Amini, MR Khosrojerdi & Reza Nosouhi. (2015) Elliptical ultrasonic–assisted turning tool with longitudinal and bending vibration modes. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 231:8, pages 1389-1395.
Crossref
Crossref
Saeid Amini, Ahmad Hosseinpour Gollo & Hossein Paktinat. (2016) An investigation of conventional and ultrasonic-assisted incremental forming of annealed AA1050 sheet. The International Journal of Advanced Manufacturing Technology 90:5-8, pages 1569-1578.
Crossref
Crossref
Reza Teimouri, Saeid Amini & Nasrodin Mohagheghian. (2017) Experimental study and empirical analysis on effect of ultrasonic vibration during rotary turning of aluminum 7075 aerospace alloy. Journal of Manufacturing Processes 26, pages 1-12.
Crossref
Crossref
Mohammad Lotfi & Saeid Amini. (2017) Experimental and numerical study of ultrasonically-assisted drilling. Ultrasonics 75, pages 185-193.
Crossref
Crossref
Chil-Chyuan Kuo & Bing-Cheng Chen. (2016) Development of hot embossing stamps with conformal cooling channels for microreplication. The International Journal of Advanced Manufacturing Technology 88:9-12, pages 2603-2608.
Crossref
Crossref
Khaled Giasin, Alma Hodzic, Vaibhav Phadnis & Sabino Ayvar-Soberanis. (2016) Assessment of cutting forces and hole quality in drilling Al2024 aluminium alloy: experimental and finite element study. The International Journal of Advanced Manufacturing Technology 87:5-8, pages 2041-2061.
Crossref
Crossref
C.-C. Kuo & T.-S. Chiang. (2016) Modeling and experimental analysis in lifespan of a precision epoxy resin mold. Materialwissenschaft und Werkstofftechnik 47:9, pages 839-844.
Crossref
Crossref
Saeid Amini, M. Mohammad Nazari & A. Rezaei. (2015) Bending vibrational tool for friction stir welding process. The International Journal of Advanced Manufacturing Technology 84:9-12, pages 1889-1896.
Crossref
Crossref
C. C. Kuo, Y. J. Wang, H. Y. Liao, H. J. Hsu & T. S. Chiang. (2016) The evolution of manufacturing processes for micro-featured epoxy resin mold. Materialwissenschaft und Werkstofftechnik 47:4, pages 341-350.
Crossref
Crossref
Min Zuo, Tingting Wu, Kegeng Xu, Shiquan Liu, Degang Zhao & Haoran Geng. (2014) Sol–gel route to ceria coatings on AA2024-T3 aluminum alloy. Journal of Coatings Technology and Research 12:1, pages 75-83.
Crossref
Crossref
C.‐C. Kuo & H.‐J. Hsu. (2013) A cost‐effective method to fabricate micro‐featured mold for microstructures replication. Materialwissenschaft und Werkstofftechnik 44:11, pages 927-932.
Crossref
Crossref