Citations (59)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (15)
Muhammad Umar Farooq, Saqib Anwar & Abu Hurairah. (2023) Reducing micro-machining errors during electric discharge machining of titanium alloy using nonionic liquids. Materials and Manufacturing Processes 0:0, pages 1-16.
Read now
Read now
Israa Dheyaa Khalaf Alrubaye & Gualtiero Fantoni. (2023) Toward green electrical discharge machining (EDM): state of art and outlook. Machining Science and Technology 27:1, pages 63-105.
Read now
Read now
Arun Pillai K.V & Hariharan P. (2023) Surface characteristics and recast layer thickness analysis of µed machined Inconel 718 alloy with biodiesels. Materials and Manufacturing Processes 38:1, pages 105-115.
Read now
Read now
Kashif Ishfaq, Muhammad Umair Waseem & Muhammad Sana. (2022) Investigating cryogenically treated electrodes’ performance under modified dielectric(s) for EDM of Inconel(617). Materials and Manufacturing Processes 37:16, pages 1902-1911.
Read now
Read now
Sarangapani Palani, Poovazhagan Lakshmanan & Rajkumar Kaliyamurthy. (2020) Experimental investigations of electrochemical micromachining of nickel aluminum bronze alloy. Materials and Manufacturing Processes 35:16, pages 1860-1869.
Read now
Read now
N. Pradeep, K. Shanmuga Sundaram & M. Pradeep Kumar. (2020) Performance investigation of variant polymer graphite electrodes used in electrochemical micromachining of ASTM A240 grade 304. Materials and Manufacturing Processes 35:1, pages 72-85.
Read now
Read now
Munmun Bhaumik & Kalipada Maity. (2019) Effect of deep cryotreated tungsten carbide electrode and SiC powder on EDM performance of AISI 304. Particulate Science and Technology 37:8, pages 981-992.
Read now
Read now
Manisha Priyadarshini, Chandan Kumar Biswas & Ajit Behera. (2019) Machining of sub-cooled low carbon tool steel by wire-EDM. Materials and Manufacturing Processes 34:12, pages 1316-1325.
Read now
Read now
Ranjith R.Tamilselvam P.Prakash T.Chinnasamy C.. (2019) Examinations concerning the electric discharge machining of AZ91/5B4CP composites utilizing distinctive electrode materials. Materials and Manufacturing Processes 34:10, pages 1120-1128.
Read now
Read now
Anil Kumar Singla, Jagtar Singh & Vishal S. Sharma. (2018) Processing of materials at cryogenic temperature and its implications in manufacturing: A review. Materials and Manufacturing Processes 33:15, pages 1603-1640.
Read now
Read now
J. Cyril Pilligrin, P. Asokan, J. Jerald & G. Kanagaraj. (2018) Effects of electrode materials on performance measures of electrical discharge micro-machining. Materials and Manufacturing Processes 33:6, pages 606-615.
Read now
Read now
Rachin Goyal, Sehijpal Sngh & Harmesh Kumar. (2018) Performance evaluation of cryogenically assisted electric discharge machining (CEDM) process. Materials and Manufacturing Processes 33:4, pages 433-443.
Read now
Read now
Salman Khani, Masoud Farahnakian & Mohammad Reza Razfar. (2015) Experimental Study on Hybrid Cryogenic and Plasma-Enhanced Turning of 17-4PH Stainless Steel. Materials and Manufacturing Processes 30:7, pages 868-874.
Read now
Read now
S.P. Leo Kumar, J. Jerald, S. Kumanan & R. Prabakaran. (2014) A Review on Current Research Aspects in Tool-Based Micromachining Processes. Materials and Manufacturing Processes 29:11-12, pages 1291-1337.
Read now
Read now
Lin Tang & Yong-Feng Guo. (2014) Influence of Discharge Energy Parameters on S-03 High-Strength Steel for Aerospace Components. Materials and Manufacturing Processes 29:1, pages 53-58.
Read now
Read now
Articles from other publishers (44)
Zhu Qi Chu, Kun Xia Wei, Wei Wei & Igor V. Alexandrov. (2023) Enhancing performance of electrical discharge machining by ultrafine-grained Cu-0.5%Cr electrode. The International Journal of Advanced Manufacturing Technology.
Crossref
Crossref
Kashif Ishfaq, Muhammad Sana, Muhammad Umair Waseem, Saqib Anwar, Abdullah Yahia Alfaify & Abdul Wasy Zia. (2023) Surface quality investigation in surfactant-based EDM of Inconel 617 using deep cryogenically treated electrodes. The International Journal of Advanced Manufacturing Technology 127:1-2, pages 861-878.
Crossref
Crossref
Kashif Ishfaq, Muhammad Sana, Muhammad Arif Mahmood, Saqib Anwar & Muhammad Umair Waseem. (2023) Evaluating Surface Quality of Inconel 617 by Employing Deep Cryogenically Treated Electrodes in Surfactant-Added Dielectrics of Transformer Oil. Metals 13:6, pages 1092.
Crossref
Crossref
Rahul Davis, Abhishek Singh, Kishore Debnath, Anup Kumar Keshri, Paulo Soares, Luciane Sopchenski, Herman A. Terryn & Ved Prakash. (2023) Surface modification of biodegradable Mg alloy by adapting µEDM capabilities with cryogenically-treated tool electrodes. The International Journal of Advanced Manufacturing Technology.
Crossref
Crossref
Preecha Yupapin, Youssef Trabelsi, Anbuchezhian Nattappan & Sampath Boopathi. (2022) Performance Improvement of Wire-Cut Electrical Discharge Machining Process Using Cryogenically Treated Super-Conductive State of Monel-K500 Alloy. Iranian Journal of Science and Technology, Transactions of Mechanical Engineering 47:1, pages 267-283.
Crossref
Crossref
Sampath Boopathi. (2022) Cryogenically treated and untreated stainless steel grade 317 in sustainable wire electrical discharge machining process: a comparative study. Environmental Science and Pollution Research.
Crossref
Crossref
Hamed H. Pourasl, Mousa Javidani, Vahid M. Khojastehnezhad & Reza Vatankhah Barenji. (2022) The Performance Prediction of Electrical Discharge Machining of AISI D6 Tool Steel Using ANN and ANFIS Techniques: A Comparative Study. Crystals 12:3, pages 343.
Crossref
Crossref
Elango Kannan, Youssef Trabelsi, Sampath Boopathi & Sivapragasam Alagesan. (2022) Influences of cryogenically treated work material on near-dry wire-cut electrical discharge machining process. Surface Topography: Metrology and Properties 10:1, pages 015027.
Crossref
Crossref
Vijaykumar S Jatti, Nitin K Khedkar, Vinaykumar S Jatti & Pawandeep Dhall. (2022) Investigating the effect of cryogenic treatment of workpieces and tools on electrical discharge machining performance. AIMS Materials Science 9:6, pages 835-862.
Crossref
Crossref
Ramesh Krishnan, K. Gnanasekaran, D. Elil Raja, S. Jagadeesh & S. Prathap Singh. (2022) Experimental study of micro-EDM on EN24 steel with normal brass, tin coated brass, cryogenic treated brass tool by varying the machining parameters. Materials Today: Proceedings 66, pages 2062-2069.
Crossref
Crossref
Sanjeev Kumar, Satish Kumar, Rajesh Sharma, Manjit Singh & Rajdeep Singh. (2022) Artificial neural network based modeling to predict micro-hardness during EDM of cryo-treated titanium alloys. Materials Today: Proceedings 56, pages 2938-2944.
Crossref
Crossref
Rachin Goyal, Amresh Kumar, Saurabh Chaitanya, Sachin Mohal & Aneesh Goyal. (2022) Decision on the range of peak current during cryogenically assisted electric discharge machining process. Materials Today: Proceedings 56, pages 2753-2757.
Crossref
Crossref
B.K. Tharian, P.B. Dhanish & R. Manu. (2021) Enhancement of material removal rate in Electric Discharge Machining of Inconel 718 using cryo-treated graphite electrodes. Materials Today: Proceedings 47, pages 5172-5176.
Crossref
Crossref
Divya Prakash, Mohammad Tariq, Rahul Davis, Abhishek Singh & Kishore Debnath. (2021) Influence of cryogenic treatment on the performance of micro-EDM tool electrode in machining of magnesium alloy AZ31B. Materials Today: Proceedings 39, pages 1198-1201.
Crossref
Crossref
Kun Xia Wei, Zhu Qi Chu, Li Chen Yang, Wei Wei, Qing Bo Du, Igor V. Alexandrov & Jing Hu. (2020) Performance Evaluation of Electrical Discharge Machining using Ultrafine-Grained Cu Electrodes Processed by Equal Channel Angular Pressing and Deep Cryogenic Treatment. Journal of Materials Engineering and Performance 30:1, pages 281-289.
Crossref
Crossref
AMOLJIT SINGH GILL, SANJEEV KUMAR, JUJHAR SINGH, VIVEK AGGARWAL & SHUBHAM SHARMA. (2020) A REVIEW OF RECENT METHODS FOR TOOL WEAR REDUCTION IN ELECTRICAL DISCHARGE MACHINING. Surface Review and Letters 27:12, pages 2030002.
Crossref
Crossref
J. M. Jafferson, P. Hariharan & J. Ramkumar. (2020) Correlation of Three-Dimensional Roughness Parameters With the Crater Dimensions in μED-Milling of Cryogenic-Treated Tool and Workpiece. Journal of Micro and Nano-Manufacturing 8:1.
Crossref
Crossref
Kosaraju Satynarayana, Kumkuma Rajkiran, Pujari Anil kumar & D Chakradhar. (2020) A Role of cryogenic in Wire cut EDM process. E3S Web of Conferences 184, pages 01067.
Crossref
Crossref
Rachin Goyal, Vinod Rohilla, Amresh Kumar, Aneesh Goyal & Sushil Mittal. (2020) Selection of range of pulse duration during cryogenically assisted electric discharge machining. Materials Today: Proceedings 33, pages 1637-1642.
Crossref
Crossref
Narender Singh & Pushpendra S. Bharti. (2020) A review on micro electric discharge machining of titanium alloys. Materials Today: Proceedings 25, pages 742-750.
Crossref
Crossref
Waseem Tahir & Mirza Jahanzaib. (2019) Multi-objective optimization of WEDM using cold treated brass wire for HSLA hardened steel. Journal of the Brazilian Society of Mechanical Sciences and Engineering 41:11.
Crossref
Crossref
Abbas Razavykia, Cristiana Delprete & Paolo Baldissera. (2019) Correlation between Microstructural Alteration, Mechanical Properties and Manufacturability after Cryogenic Treatment: A Review. Materials 12:20, pages 3302.
Crossref
Crossref
Rahul, Saurav Datta & Bibhuti Bhusan Biswal. (2019) Experimental studies on electro-discharge machining of Inconel 825 super alloy using cryogenically treated tool/workpiece. Measurement 145, pages 611-630.
Crossref
Crossref
Waseem Tahir, Mirza Jahanzaib, Wasim Ahmad & Salman Hussain. (2019) Surface morphology evaluation of hardened HSLA steel using cryogenic-treated brass wire in WEDM process. The International Journal of Advanced Manufacturing Technology 104:9-12, pages 4445-4455.
Crossref
Crossref
K. V. Arun Pillai, P. Hariharan & J. M. Jafferson. (2019) μED milling of Ti-6Al-4V using cryogenic-treated Wc tool and nano-graphene powder-mixed dielectricat different discharge energy regimes. The International Journal of Advanced Manufacturing Technology 102:9-12, pages 2721-2743.
Crossref
Crossref
Deepak Rajendra Unune, Chandrakant Kumar Nirala & Harlal Singh Mali. (2019) Accuracy and quality of micro-holes in vibration assisted micro-electro-discharge drilling of Inconel 718. Measurement 135, pages 424-437.
Crossref
Crossref
Neelesh Singh, Navjyot Panpalia, Man Mohan Singh, B.C. Routara & R.K. Nayak. (2018) Comparison of machining characteristics of Inconel 601 with normal and cryogenic cooled electrode in EDM using RSM. IOP Conference Series: Materials Science and Engineering 455, pages 012078.
Crossref
Crossref
Vijaykumar S. Jatti. (2018) Multi-characteristics optimization in EDM of NiTi alloy, NiCu alloy and BeCu alloy using Taguchi’s approach and utility concept. Alexandria Engineering Journal 57:4, pages 2807-2817.
Crossref
Crossref
Rahul, Dileep Kumar Mishra, Saurav Datta & Manoj Masanta. (2018) Effects of Tool Electrode on EDM Performance of Ti-6Al-4V. Silicon 10:5, pages 2263-2277.
Crossref
Crossref
Munmun Bhaumik & Kalipada Maity. (2018) Effect of different tool materials during EDM performance of titanium grade 6 alloy. Engineering Science and Technology, an International Journal 21:3, pages 507-516.
Crossref
Crossref
CHINMAYA PRASAD MOHANTY, MANTRA PRASAD SATPATHY, SIBA SANKAR MAHAPATRA & MANAS RANJAN SINGH. (2018) Optimization of cryo-treated EDM variables using TOPSIS-based TLBO algorithm. Sādhanā 43:4.
Crossref
Crossref
Neelesh Singh, B.C. Routara & R.K. Nayak. (2018) Study of machining characteristics of Inconel 601 with cryogenic cooled electrode in EDM using RSM. Materials Today: Proceedings 5:11, pages 24277-24286.
Crossref
Crossref
Munmun Bhaumik & Kalipada Maity. 2018. Advanced Manufacturing and Materials Science. Advanced Manufacturing and Materials Science
21
28
.
MUNMUN BHAUMIK & KALIPADA MAITY. (2017) EFFECTS OF PROCESS PARAMETERS AND CRYOTREATED ELECTRODE ON THE RADIAL OVERCUT OF AISI 304 IN SiC POWDER MIXED EDM. Surface Review and Letters 24:Supp02, pages 1850029.
Crossref
Crossref
Sanjeev Kumar, Ajay Batish, Rupinder Singh & Anirban Bhattacharya. (2017) Effect of cryogenically treated copper-tungsten electrode on tool wear rate during electro-discharge machining of Ti-5Al-2.5Sn alloy. Wear 386-387, pages 223-229.
Crossref
Crossref
Sanjeev Kumar, Rupinder Singh, Ajay Batish, T. P. Singh & Rajdeep Singh. (2016) Investigating surface properties of cryogenically treated titanium alloys in powder mixed electric discharge machining. Journal of the Brazilian Society of Mechanical Sciences and Engineering 39:7, pages 2635-2648.
Crossref
Crossref
Sanjeev Kumar, Ajay Batish, Rupinder Singh & TP Singh. (2016) Machining performance of cryogenically treated Ti–5Al–2.5Sn titanium alloy in electric discharge machining: A comparative study. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 231:11, pages 2017-2024.
Crossref
Crossref
Rahul, Saurav Datta, Bibhuti Bhusan Biswal & Siba Sankar Mahapatra. (2017) Electrical discharge machining of Inconel 825 using cryogenically treated copper electrode: Emphasis on surface integrity and metallurgical characteristics. Journal of Manufacturing Processes 26, pages 188-202.
Crossref
Crossref
Chinmaya P. Mohanty, Siba Sankar Mahapatra & Manas Ranjan Singh. (2017) An intelligent approach to optimize the EDM process parameters using utility concept and QPSO algorithm. Engineering Science and Technology, an International Journal 20:2, pages 552-562.
Crossref
Crossref
S. Kumar, R. Singh & A. Batish. 2017. Reference Module in Materials Science and Materials Engineering. Reference Module in Materials Science and Materials Engineering.
M. Pervaz Ahmed, H. Siddhi Jailani, S. Rasool Mohideen & A. Rajadurai. (2016) Effect of Cryogenic Treatment on Microstructure and Properties of CuBe2. Metallography, Microstructure, and Analysis 5:6, pages 528-535.
Crossref
Crossref
Chinmaya P. Mohanty, Siba Sankar Mahapatra & Manas Ranjan Singh. (2014) A particle swarm approach for multi-objective optimization of electrical discharge machining process. Journal of Intelligent Manufacturing 27:6, pages 1171-1190.
Crossref
Crossref
Sanjeev Kumar, Rupinder Singh, Ajay Batish & T.P. Singh. (2014) Study the Surface Characteristics of Cryogenically Treated Tool-Electrodes in Powder Mixed Electric Discharge Machining Process. Materials Science Forum 808, pages 19-33.
Crossref
Crossref
L. Tang & Y. F. Guo. (2013) Electrical discharge precision machining parameters optimization investigation on S-03 special stainless steel. The International Journal of Advanced Manufacturing Technology 70:5-8, pages 1369-1376.
Crossref
Crossref