Citations (51)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (14)
Burri Srinivasa Reddy, Pradeep Kumar Murugasen & Vinothkumar Sivalingam. (2023) Machinability Studies on Commercially Pure Titanium (Grade-2) Under Cryogenic Condition. Materials and Manufacturing Processes 38:12, pages 1463-1471.
Read now
Read now
Allan George, Basil Kuriachen, P.B. Dhanish & Jose Mathew. (2022) Experimental investigations into the influence of AlSi-10Mg soft tool coating on the machinability of Ti6Al4V. Materials and Manufacturing Processes 37:12, pages 1422-1432.
Read now
Read now
S. P. Leo Kumar & D. Avinash. (2021) Investigations on achievable surface quality in milling of Ti-35Nb-7Zr-5Ta alloy. Materials and Manufacturing Processes 36:15, pages 1800-1806.
Read now
Read now
S. Lakshmanan, M. Pradeep Kumar, M. Dhananchezian & N. Yuvaraj. (2020) Investigation of monolayer coated WC inserts on turning Ti-alloy. Materials and Manufacturing Processes 35:7, pages 826-835.
Read now
Read now
Rachin Goyal, Sehijpal Sngh & Harmesh Kumar. (2018) Performance evaluation of cryogenically assisted electric discharge machining (CEDM) process. Materials and Manufacturing Processes 33:4, pages 433-443.
Read now
Read now
Vishnu Vardhan Mukkoti, G. Sankaraiah & M. Yohan. (2018) Effect of cryogenic treatment of tungsten carbide tools on cutting force and power consumption in CNC milling process. Production & Manufacturing Research 6:1, pages 149-170.
Read now
Read now
Shakeel Ahmed & Pradeep Kumar. (2017) Performance evaluation of cryogenic cooling in reaming titanium alloy. Materials and Manufacturing Processes 32:3, pages 302-308.
Read now
Read now
Emel Kuram. (2017) Nose radius and cutting speed effects during milling of AISI 304 material. Materials and Manufacturing Processes 32:2, pages 185-192.
Read now
Read now
L. Shakeel Ahmed & M. Pradeep Kumar. (2016) Cryogenic Drilling of Ti–6Al–4V Alloy Under Liquid Nitrogen Cooling. Materials and Manufacturing Processes 31:7, pages 951-959.
Read now
Read now
Anirban Bhattacharya, Tarun Kumar Bera & Ankit Thakur. (2015) On Cutter Deflection Profile Errors in End Milling: Modeling and Experimental Validation. Materials and Manufacturing Processes 30:8, pages 1042-1059.
Read now
Read now
R. Farshbaf Zinati, M. R. Razfar & H. Nazockdast. (2015) Surface Integrity Investigation for Milling PA 6/MWCNT. Materials and Manufacturing Processes 30:8, pages 1035-1041.
Read now
Read now
Zhenyuan Jia, Liqi Zhao, Zongjin Ren, Fei Wang, Dong Li & Weilei Ji. (2015) Investigation into Influence of Feed Speed on Surface Roughness in Wire Sawing. Materials and Manufacturing Processes 30:7, pages 875-881.
Read now
Read now
Salman Khani, Masoud Farahnakian & Mohammad Reza Razfar. (2015) Experimental Study on Hybrid Cryogenic and Plasma-Enhanced Turning of 17-4PH Stainless Steel. Materials and Manufacturing Processes 30:7, pages 868-874.
Read now
Read now
Hongbing Wu & Lei Guo. (2014) Machinability of Titanium Alloy TC21 Under Orthogonal Turning Process. Materials and Manufacturing Processes 29:11-12, pages 1441-1445.
Read now
Read now
Articles from other publishers (37)
Ersilia Cozzolino & Antonello Astarita. (2023) Energy saving in milling of electron beam–melted Ti6Al4V parts: influence of process parameters. The International Journal of Advanced Manufacturing Technology 127:1-2, pages 179-194.
Crossref
Crossref
Jihang Li, Wentian Shi, Yuxiang Lin, Jie Li, Shuai Liu & Bo Liu. (2023) Comparative study on MQL milling and hole making processes for laser beam powder bed fusion (L-PBF) of Ti-6Al-4V titanium alloy. Journal of Manufacturing Processes 94, pages 20-34.
Crossref
Crossref
Miao Xie, Xinli Yu, Wei Bao, Changfu Liu & Min Xia. (2023) Side-Milling-Force Model Considering Tool Runout and Workpiece Deformation. Electronics 12:4, pages 968.
Crossref
Crossref
Suryadiwansa Harun, Yanuar Burhanuddin & Gusri Akhyar Ibrahim. (2022) The Effect of Cutting Parameters on Surface Roughness and Morphology of Ti-6Al-4V ELI Titanium Alloy during Turning with Actively Driven Rotary Tools. Journal of Manufacturing and Materials Processing 6:5, pages 105.
Crossref
Crossref
Ergün EKİCİ & Gültekin UZUN. (2022) Effects on machinability of cryogenic treatment applied to carbide tools in the milling of Ti6AI4V with optimization via the Taguchi method and grey relational analysis. Journal of the Brazilian Society of Mechanical Sciences and Engineering 44:7.
Crossref
Crossref
Rahul Davis, Abhishek Singh, Mark James Jackson, Reginaldo Teixeira Coelho, Divya Prakash, Charalambos Panayiotou Charalambous, Waqar Ahmed, Leonardo Rosa Ribeiro da Silva & Abner Ankit Lawrence. (2022) A comprehensive review on metallic implant biomaterials and their subtractive manufacturing. The International Journal of Advanced Manufacturing Technology 120:3-4, pages 1473-1530.
Crossref
Crossref
Rahul Davis, Abhishek Singh, Roberta Maia Sabino, Robson Bruno Dutra Pereira, Ketul Popat, Paulo Soares & Mark James Jackson. (2021) Performance Investigation of Cryo-treated End Mill on the Mechanical and in vitro behavior of Hybrid-lubri-coolant-milled Ti-6Al-4V alloy. Journal of Manufacturing Processes 71, pages 472-488.
Crossref
Crossref
Amanda Oliveira Mello, Robson Bruno Dutra Pereira, Carlos Henrique Lauro, Lincoln Cardoso Brandão & J. Paulo Davim. (2021) Comparison between the machinability of different titanium alloys (Ti–6Al–4V and Ti–6Al–7Nb) employing the multi-objective optimization. Journal of the Brazilian Society of Mechanical Sciences and Engineering 43:11.
Crossref
Crossref
Navneet Khanna, Chetan Agrawal, Danil Yu Pimenov, Anil Kumar Singla, Alisson Rocha Machado, Leonardo Rosa Ribeiro da Silva, Munish Kumar Gupta, Murat Sarikaya & Grzegorz M. Krolczyk. (2021) Review on design and development of cryogenic machining setups for heat resistant alloys and composites. Journal of Manufacturing Processes 68, pages 398-422.
Crossref
Crossref
Xueguang Li, Yahui Wang, Ke Guo & Liqin Miao. (2021) Simulation analysis of cutting process for Inconel718 nickel-based superalloy. The International Journal of Advanced Manufacturing Technology 114:9-10, pages 2721-2738.
Crossref
Crossref
Vinothkumar Sivalingam, Jie Sun, Baskaran Selvam, Pengwei Zheng & Zhuoliang Zan. (2021) Investigation of Cryogenically Treated Physical Vapor Deposition TiAlN/NbN-Coated Carbide Inserts in End Milling of Hard Titanium Alloy. Journal of Testing and Evaluation 49:3, pages 20180728.
Crossref
Crossref
Enes Kilincarslan, Sena Kabave Kilincarslan & M. Huseyin Cetin. (2021) Evaluation of the clean nano-cutting fluid by considering the tribological performance and cost parameters. Tribology International 157, pages 106916.
Crossref
Crossref
N. H. Rafai, K. Kamdani, M. R. Ibrahim, E. A. Rahim, M. N. Sazali, C. K. Wong & Y. L. Chong. 2021. Recent Trends in Manufacturing and Materials Towards Industry 4.0. Recent Trends in Manufacturing and Materials Towards Industry 4.0
203
208
.
Chetan Agrawal, Navneet Khanna, Munish Kumar Gupta & Yusuf Kaynak. (2020) Sustainability assessment of in-house developed environment-friendly hybrid techniques for turning Ti-6Al-4V. Sustainable Materials and Technologies 26, pages e00220.
Crossref
Crossref
J Kesavan & V Senthilkumar. (2020) Experimental investigations on cryo-machining of Hastelloy C-276 with tool wear characteristics. Sādhanā 45:1.
Crossref
Crossref
Asit Kumar Parida, Paruchuri Venkatswar Rao & Sudarsan Ghosh. (2020) Machinability study of Ti-6Al-4V alloy using solid lubricant. Sādhanā 45:1.
Crossref
Crossref
Rahul Davis & Abhishek Singh. (2020) Tailoring Surface Integrity of Biomedical Mg Alloy AZ31B Using Distinct End Mill Treatment Conditions and Machining Environments. Journal of Materials Engineering and Performance 29:11, pages 7617-7635.
Crossref
Crossref
Duygu GÜRKAN, Saltuk Alper YAŞAR, Gültekin UZUN & İhsan KORKUT. (2020) VORTEKS SOĞUTMA YÖNTEMİNİN TALAŞLI İMALAT YÖNTEMLERİ VE KESME PARAMETRELERİNE GÖRE İNCELENMESİ. Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji 8:3, pages 730-745.
Crossref
Crossref
Abdulmajeed Dabwan, Saqib Anwar, Ali M. Al-Samhan & Mustafa M. Nasr. (2020) On the Effect of Electron Beam Melted Ti6Al4V Part Orientations during Milling. Metals 10:9, pages 1172.
Crossref
Crossref
Jianming Li, Taoyuan Li, Xiangyu Wang, Yang Qiao & Peiquan Guo. (2020) Effects of Cooling Conditions on Surface Integrity in Turning of TC4 Alloy. IOP Conference Series: Materials Science and Engineering 735:1, pages 012035.
Crossref
Crossref
Lakshmanan Selvam, Pradeep Kumar Murugesan, Dhananchezian Mani & Yuvaraj Natarajan. (2019) Investigation of AlCrN-Coated Inserts on Cryogenic Turning of Ti-6Al-4V Alloy. Metals 9:12, pages 1338.
Crossref
Crossref
Bobby Oedy Pramoedyo Soepangkat, Rachmadi Norcahyo, Bambang Pramujati & M. Abdul Wahid. (2019) Multi-objective optimization in face milling process with cryogenic cooling using grey fuzzy analysis and BPNN-GA methods. Engineering Computations 36:5, pages 1542-1565.
Crossref
Crossref
TAO WANG, YANG LI, JIAQI LIU, LINGCHAO QIN, NING WANG, LIFENG ZHANG, HAO WANG & ZHAN LI. (2019) MILLING FORCE AND SURFACE TOPOGRAPHY OF Ti-6Al-4V TITANIUM ALLOY CLADDED BY THE LASER. Surface Review and Letters 26:05, pages 1850185.
Crossref
Crossref
Bogdan Słodki, Wojciech Zębala & Grzegorz Struzikiewicz. (2019) Turning Titanium Alloy, Grade 5 ELI, With the Implementation of High Pressure Coolant. Materials 12:5, pages 768.
Crossref
Crossref
A S Mohruni, M Zahir, M Yanis, S Sharif & I Yani. (2019) Investigation of Finite Element Modelling on Thin-Walled Machining of Ti6Al4V using DEFORM-3D. Journal of Physics: Conference Series 1167, pages 012002.
Crossref
Crossref
Vinothkumar Sivalingam, Jie Sun, Baskaran Selvam, Pradeep Kumar Murugasen, Bin Yang & Saad Waqar. (2019) Experimental investigation of tool wear in cryogenically treated insert during end milling of hard Ti alloy. Journal of the Brazilian Society of Mechanical Sciences and Engineering 41:2.
Crossref
Crossref
Vinothkumar Sivalingam, Jie Sun, Bin Yang, Kai Liu & Ramesh Raju. (2018) Machining performance and tool wear analysis on cryogenic treated insert during end milling of Ti-6Al-4V alloy. Journal of Manufacturing Processes 36, pages 188-196.
Crossref
Crossref
A. Chukwujekwu Okafor & Paras Mohan Jasra. (2018) Effects of cooling strategies and tool coatings on cutting forces and tooth frequency in high-speed down-milling of Inconel-718 using helical bull-nose solid carbide end mills. The International Journal of Advanced Manufacturing Technology 97:5-8, pages 2301-2318.
Crossref
Crossref
Emel Kuram. (2016) The effect of monolayer TiCN-, AlTiN-, TiAlN-and two layers TiCN + TiN- and AlTiN + TiN-coated cutting tools on tool wear, cutting force, surface roughness and chip morphology during high-speed milling of Ti6Al4V titanium alloy. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 232:7, pages 1273-1286.
Crossref
Crossref
Taoheed O. SadiqSulaiman A. Olawore & Jamaliah Idris. (2018) Energy Consideration in Machining Titanium Alloys with a Low Carbon Manufacturing Requirements: A Critical Review. International Journal of Engineering Research in Africa 35, pages 89-107.
Crossref
Crossref
M. Ibrahim Sadik & Simon Isakson. (2017) The role of PVD coating and coolant nature in wear development and tool performance in cryogenic and wet milling of Ti-6Al-4V. Wear 386-387, pages 204-210.
Crossref
Crossref
Mohd Azlan Suhaimi, Kyung-Hee Park, Safan Sharif, Dong-Won Kim & Amrifan Saladin Mohruni. (2017) Evaluation of cutting force and surface roughness in high-speed milling of compacted graphite iron. MATEC Web of Conferences 101, pages 03016.
Crossref
Crossref
Shunyao Du, Minghe Chen, Lansheng Xie, Zhishou Zhu & Xinnan Wang. (2016) Optimization of process parameters in the high-speed milling of titanium alloy TB17 for surface integrity by the Taguchi-Grey relational analysis method. Advances in Mechanical Engineering 8:10, pages 168781401667144.
Crossref
Crossref
Nik Masmiati, Ahmed A.D. Sarhan, Mohsen Abdel Naeim Hassan & Mohd Hamdi. (2016) Optimization of cutting conditions for minimum residual stress, cutting force and surface roughness in end milling of S50C medium carbon steel. Measurement 86, pages 253-265.
Crossref
Crossref
Kaining Shi, Dinghua Zhang, Junxue Ren, Changfeng Yao & Xinchun Huang. (2016) Effect of cutting parameters on machinability characteristics in milling of magnesium alloy with carbide tool. Advances in Mechanical Engineering 8:1, pages 168781401662839.
Crossref
Crossref
Hongbing Wu & Shaojian Zhang. (2014) Effects of cutting conditions on the milling process of titanium alloy Ti6Al4V. The International Journal of Advanced Manufacturing Technology 77:9-12, pages 2235-2240.
Crossref
Crossref
E.M. Rubio, B. Agustina, M. Marín & A. Bericua. (2015) Cooling Systems Based on Cold Compressed Air: A Review of the Applications in Machining Processes. Procedia Engineering 132, pages 413-418.
Crossref
Crossref