Citations (84)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (18)
Anish Nair, Somasundaram Kumanan, Chander Prakash, Dhanesh G. Mohan, Kuldeep Kumar Saxena, Sandeep Kumar & Gaurav Kumar. (2023) Research developments and technological advancements in conventional and non-conventional machining of superalloys – a review. Journal of Adhesion Science and Technology 37:22, pages 3053-3124.
Read now
Read now
Umair Arif, Imtiaz Ali Khan & Faisal Hasan. (2023) Green and sustainable electric discharge machining: a review. Advances in Materials and Processing Technologies 9:3, pages 970-1044.
Read now
Read now
Girija Nandan Arka, Susanta Kumar Sahoo, Md Manzar Iqbal & Subhash Singh. (2022) Acoustic horn tool assembly design for ultrasonic assisted turning and its effects on performance potential. Materials and Manufacturing Processes 37:3, pages 260-270.
Read now
Read now
Jitendra Kumar, Tarun Soota, S.K. Rajput & Kuldeep K. Saxena. (2021) Machining and optimization of Zircaloy-2 using different tool electrodes. Materials and Manufacturing Processes 36:13, pages 1513-1523.
Read now
Read now
C. Balasubramaniyan, K. Rajkumar & S. Santosh. (2021) Wire-EDM machinability investigation on quaternary Ni44Ti50Cu4Zr2 shape memory alloy. Materials and Manufacturing Processes 36:10, pages 1161-1170.
Read now
Read now
B. Surekha, T. Sree Lakshmi, Hemalata Jena & Priyaranjan Samal. (2021) Response surface modelling and application of fuzzy grey relational analysis to optimise the multi response characteristics of EN-19 machined using powder mixed EDM. Australian Journal of Mechanical Engineering 19:1, pages 19-29.
Read now
Read now
Sandeep Kumar & Akshay Dvivedi. (2020) Development of material removal rate model and performance evaluation of ultrasonic turning process. Materials and Manufacturing Processes 35:14, pages 1598-1611.
Read now
Read now
Pushpendra S. Bharti. (2020) Two-step optimization of electric discharge machining using neural network based approach and TOPSIS. Journal of Interdisciplinary Mathematics 23:1, pages 81-96.
Read now
Read now
Himanshu Payal, Sachin Maheshwari & Pushpendra S. Bharti. (2019) Parametric optimization of EDM process for Inconel 825 using GRA and PCA approach. Journal of Information and Optimization Sciences 40:2, pages 291-307.
Read now
Read now
Xuan-Phuong Dang. (2018) Constrained multi-objective optimization of EDM process parameters using kriging model and particle swarm algorithm. Materials and Manufacturing Processes 33:4, pages 397-404.
Read now
Read now
Gangadharudu Talla, S. Gangopadhyay & C. K. Biswas. (2017) Influence of graphite powder mixed EDM on the surface integrity characteristics of Inconel 625. Particulate Science and Technology 35:2, pages 219-226.
Read now
Read now
Yongfeng Guo, Li Wang, Guowei Zhang & Pengju Hou. (2017) Multi-response optimization of the electrical discharge machining of insulating zirconia. Materials and Manufacturing Processes 32:3, pages 294-301.
Read now
Read now
M. Uthayakumar, M. Adam Khan, S. Thirumalai Kumaran, Adam Slota & Jerzy Zajac. (2016) Machinability of Nickel-Based Superalloy by Abrasive Water Jet Machining. Materials and Manufacturing Processes 31:13, pages 1733-1739.
Read now
Read now
Ravinder Kataria, Jatinder Kumar & B. S. Pabla. (2016) Experimental Investigation and Optimization of Machining Characteristics in Ultrasonic Machining of WC–Co Composite Using GRA Method. Materials and Manufacturing Processes 31:5, pages 685-693.
Read now
Read now
A. Thakur, S. Gangopadhyay & A. Mohanty. (2015) Investigation on Some Machinability Aspects of Inconel 825 During Dry Turning. Materials and Manufacturing Processes 30:8, pages 1026-1034.
Read now
Read now
Viboon Tangwarodomnukun, Panida Visonsaya, Nisarat Buranajant, Monchai Opartpunyasarn & Chaiya Dumkum. (2015) Experimental Investigation and Optimization of Micro-EDMing Process for Silicon Substrates. Materials and Manufacturing Processes 30:8, pages 974-982.
Read now
Read now
Qingyu Liu, Qinhe Zhang, Min Zhang & Jianhua Zhang. (2015) Effect of Crystallographic Anisotropy on Micro EDM Process. Materials and Manufacturing Processes 30:8, pages 961-967.
Read now
Read now
S. Dewangan, C.K. Biswas & S. Gangopadhyay. (2014) Influence of Different Tool Electrode Materials on EDMed Surface Integrity of AISI P20 Tool Steel. Materials and Manufacturing Processes 29:11-12, pages 1387-1394.
Read now
Read now
Articles from other publishers (66)
MD PIYAR UDDIN, JOHN DEB BARMA & ARINDAM MAJUMDER. (2023) EFFECT OF PROCESS PARAMETERS ON THE PERFORMANCE OF POWDER MIXED EDM OF Ni-BASED SUPERALLOYS: A REVIEW. Surface Review and Letters 30:11.
Crossref
Crossref
Pankaj Sharma, Vishal Singh & Manoj Kumar Sinha. (2023) Surface Morphology Investigations during Multi-walled Carbon Nanotubes and Nanographene Mixed Electrical Discharge Machining of Inconel 825. Journal of Materials Engineering and Performance.
Crossref
Crossref
Santonab Chakraborty, Himalaya Nirjhar Datta & Shankar Chakraborty. (2023) Grey Relational Analysis-Based Optimization of Machining Processes: a Comprehensive Review. Process Integration and Optimization for Sustainability 7:4, pages 609-639.
Crossref
Crossref
Kapil Surani, Shailesh Patel, Hitesh Panchal, Naveen Gupta, Tarang Shinde & Yogita Sharma. (2023) Mathematical modeling for radial overcut on powder mixed micro-electrical discharge machining (μ-EDM) of TZM-molybdenum superalloy by response surface methodology. International Journal on Interactive Design and Manufacturing (IJIDeM).
Crossref
Crossref
Balamurugan Gopalakrishnan, Vivek Chandrasekaran & R. Vishnu. (2023) Optimization of EDM process parameters using MCDM based on customer preference rating method. Materials Today: Proceedings.
Crossref
Crossref
Kashif Ishfaq, Muhammad Sana, Mudassar Rehman, Saqib Anwar, Abdullah Yahia Alfaify & Abdul Wasy Zia. (2023) Role of biodegradable dielectrics toward tool wear and dimensional accuracy in Cu-mixed die sinking EDM of Inconel 600 for sustainable machining. Journal of the Brazilian Society of Mechanical Sciences and Engineering 45:4.
Crossref
Crossref
A Perumal, P.R. Rajkumar, Venkatesan G, S. Paramasamy & Gangadharan T. (2023) Multi-response optimization of machining parameters of Ti-6Al-2Sn-4Zr-2Mo alloy using EDM process through grey relational analysis. Engineering Research Express.
Crossref
Crossref
Kashif Ishfaq, Mudassar Rehman & Yanen Wang. (2022) Toward the Targeted Material Removal with Optimized Surface Finish During EDM for the Repair Applications in Dies and Molds. Arabian Journal for Science and Engineering 48:3, pages 2653-2669.
Crossref
Crossref
Kashif Ishfaq & Mudassar Rehman. (2023) Machinability investigation using Cu-mixed biodegradable dielectric for eco-friendly/sustainable machining of Ni-based superalloy. The International Journal of Advanced Manufacturing Technology 125:5-6, pages 2243-2264.
Crossref
Crossref
Rakesh Kumar Patel & Mohan Kumar Pradhan. (2023) Machining of nickel-based super alloy inconel 718 using alumina nanofluid in powder mixed electric discharge machining. Materials Research Express.
Crossref
Crossref
Nripen Mondal, Nishant, Sudipta Ghosh, Madhab Chandra Mandal, Subhadeep Pati & Soumil Banik. (2023) ANN and RSM based predictive model development and EDM process parameters optimization on AISI 304 stainless steel. Materials Today: Proceedings.
Crossref
Crossref
Surendra Singh Thakur, Sharad K. Pradhan, Shankar Sehgal & Kuldeep K. Saxena. (2022) Experimental investigations on silicon carbide mixed electric discharge machining. Silicon 15:1, pages 583-601.
Crossref
Crossref
Vishnu Singh & Saroj Kumar Sarangi. 2023. Emerging Trends in Mechanical and Industrial Engineering. Emerging Trends in Mechanical and Industrial Engineering
507
520
.
Renu Kiran Shastri & Chinmaya P. Mohanty. (2022) A Cost Effective Approach to Explore the Electrical Discharge Machined Surface Characteristics of Nimonic C263 Superalloy. Journal of Materials Engineering and Performance 31:12, pages 9748-9767.
Crossref
Crossref
Chunjiang Guo, Zhiwei Zhang, Yue Wu, Yawei Wang, Guangtong Ma, Jiangtao Shi, Zhuoyan Zhong, Zhiyong Hong, Zhijian Jin & Yue Zhao. (2022) Synergic realization of electrical insulation and mechanical strength in liquid nitrogen for high-temperature superconducting tapes with ultra-thin acrylic resin coating. Superconductor Science and Technology 35:7, pages 075014.
Crossref
Crossref
C Balasubramaniyan, K Rajkumar & S Santosh. (2021) Enhancement of machining and surface quality of quaternary alloyed NiTiCuZr shape memory alloy through ultrasonic vibration coupled WEDM. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 236:4, pages 816-833.
Crossref
Crossref
Animesh Basak, Alokesh Pramanik, Chander Prakash, Subramaniam Shankar & Sujan Debnath. (2022) Understanding the Micro-Mechanical Behaviour of Recast Layer Formed during WEDM of Titanium Alloy. Metals 12:2, pages 188.
Crossref
Crossref
Prabina Kumar Patnaik, Srimant Kumar Mishra, P T R Swain, Abhilash Purohit, Sambit Kumar Parija & Sasank Shekhar Panda. (2022) Multi-Objective optimization and experimental analysis of Electro-Discharge Machining parameters via Gray-Taguchi, TOPSIS-Taguchi and PSI-Taguchi methods. Materials Today: Proceedings 62, pages 6189-6198.
Crossref
Crossref
Nripen Mondal, Nishant, Madhab Chandra Mandal, Sourav Das & Tanumoy Banerjee. (2022) Comparative study on EDM process parameters optimization using BBO and ACO algorithms. Materials Today: Proceedings 62, pages 6601-6605.
Crossref
Crossref
B. Kishan, B. Sudheer Prem Kumar, S. Gajanana & N. Sunil Naik. 2022. Technology Innovation in Mechanical Engineering. Technology Innovation in Mechanical Engineering
101
113
.
A. Pramanik, A. K. Basak, C. Prakash, S. Shankar, Shubham Sharma & S. Narendranath. (2021) Recast Layer Formation during Wire Electrical Discharge Machining of Titanium (Ti-Al6-V4) Alloy. Journal of Materials Engineering and Performance 30:12, pages 8926-8935.
Crossref
Crossref
Anshuman Kumar Sahu & Siba Sankar Mahapatra. (2020) Prediction and optimization of performance measures in electrical discharge machining using rapid prototyping tool electrodes. Journal of Intelligent Manufacturing 32:8, pages 2125-2145.
Crossref
Crossref
Ankit Sharma, Vidyapati Kumar, Atul Babbar, Vikas Dhawan, Ketan Kotecha & Chander Prakash. (2021) Experimental Investigation and Optimization of Electric Discharge Machining Process Parameters Using Grey-Fuzzy-Based Hybrid Techniques. Materials 14:19, pages 5820.
Crossref
Crossref
D Srinivasan, G Veerappan, Ravichandran M, C Anand Chairman, S Marichamy, V Mohanavel & A Karthick. (2021) Investigation on electric erosion behavior of nickel-based super alloy (Waspaloy: Ni, Cr, Co, Mo, Ti, Al) using response surface methodology. Surface Topography: Metrology and Properties 9:3, pages 035006.
Crossref
Crossref
Ramesh Nadupuru & K. N. S. Suman. (2021) Experimental investigation and evaluation of EDM characteristics of inconel 718 material with and without assistance of magnet. International Journal on Interactive Design and Manufacturing (IJIDeM) 15:2-3, pages 225-238.
Crossref
Crossref
Renu K. Shastri & Chinmaya P. Mohanty. (2021) Sustainable Electrical Discharge Machining of Nimonic C263 Superalloy. Arabian Journal for Science and Engineering 46:8, pages 7273-7293.
Crossref
Crossref
M Adam Khan, Hargovind Soni, PM Mashinini & M Uthayakumar. (2021) Abrasive water jet cutting process form machining metals and composites for engineering applications: A review. Engineering Research Express 3:2, pages 022004.
Crossref
Crossref
Gangadharudu Talla, Roshin Thomas Varughese & S. Gangopadhyay. (2021) Surface Integrity Enhancement of Incoloy 825 During Electric Discharge Machining. Journal of The Institution of Engineers (India): Series C 102:3, pages 789-798.
Crossref
Crossref
Sıtkı AKINCIOĞLU. (2021) Taguchi Metodu ve Gri İlişkisel Analizi Kullanılarak 1,2316 Paslanmaz Çeliğin (R65) Mikro-Elektro Erozyon Delme Kabiliyetinin Değerlendirilmesi. Düzce Üniversitesi Bilim ve Teknoloji Dergisi 9:2, pages 646-660.
Crossref
Crossref
A. Perumal, A. Azhagurajan, R. Prithivirajan & S. Suresh Kumar. (2020) Experimental Investigation and Optimization of Process Parameters in Ti – (6242) Alpha–Beta Alloy Using Electrical Discharge Machining. Journal of Inorganic and Organometallic Polymers and Materials 31:4, pages 1787-1800.
Crossref
Crossref
Mohsen Asghari Ilani & Mohammad Khoshnevisan. (2021) Mathematical and physical modeling of FE-SEM surface quality surrounded by the plasma channel within Al powder-mixed electrical discharge machining of Ti-6Al-4V. The International Journal of Advanced Manufacturing Technology 112:11-12, pages 3263-3277.
Crossref
Crossref
Sahil Sharma, Umesh Kumar Vates & Amit Bansal. (2020) Optimization of machining characteristics for EDM of different nickel-based alloys by embodying of fuzzy, grey relational and Taguchi technique. World Journal of Engineering 18:1, pages 23-36.
Crossref
Crossref
Sahil Sharma, Umesh Kumar Vates & Amit Bansal. (2020) Parametric optimization in die-sinking EDM of Nimonic 90 alloy using Taguchi-based GRA approach. World Journal of Engineering 18:1, pages 146-156.
Crossref
Crossref
Mohammed Sanuf. S, N.K. Sreejith, R. Dipin Kumar & Yadhu krishnan U. (2021) Parametric optimization of hole geometry in laser drilled Inconel 825 by grey based response surface methodology. Materials Today: Proceedings 47, pages 5410-5415.
Crossref
Crossref
Soni Kumari, Gobinda Chandra Behera, Santosh Kumar Sahu, Saurav Datta, Goutam Nandi & Pradip Kumar Pal. 2021. Advances in Engineering Materials. Advances in Engineering Materials
149
159
.
Neeraj Agarwal, Nitin Shrivastava & M. K. Pradhan. 2021. Recent Advances in Smart Manufacturing and Materials. Recent Advances in Smart Manufacturing and Materials
441
452
.
Rohit Sharsar, Sudipta Ghosh, Madhab Chandra Mandal & Amitava Ray. 2021. Optimization Methods in Engineering. Optimization Methods in Engineering
549
566
.
R Arunbharathi, P Ashoka Varthanan, R Jayasurya, SV Kavin & S Jayasuriya. (2020) Experimental Study and Determination of the Effect of Drilling EDM Parameters for Incoloy 800 Alloy. IOP Conference Series: Materials Science and Engineering 993:1, pages 012139.
Crossref
Crossref
Thrinadh Jadam, Santosh Kumar Sahu, Saurav Datta & Manoj Masanta. (2020) Powder-mixed electro-discharge machining performance of Inconel 718: effect of concentration of multi-walled carbon nanotube added to the dielectric media. Sādhanā 45:1.
Crossref
Crossref
MANESWAR RAHANG & PROMOD KUMAR PATOWARI. (2020) SELECTIVE AREA DEPOSITION FOR PATTERN GENERATION IN EDM USING MASKING TECHNIQUE. Surface Review and Letters 27:10, pages 1950218.
Crossref
Crossref
Vitor Baldin, Claudia Regina Bernardi Baldin, Alisson Rocha Machado & Fred Lacerda Amorim. (2020) Machining of Inconel 718 with a defined geometry tool or by electrical discharge machining. Journal of the Brazilian Society of Mechanical Sciences and Engineering 42:5.
Crossref
Crossref
HIMADRI MAJUMDER & KALIPADA MAITY. (2019) EFFECT OF ELECTRODE MATERIAL ON CUT QUALITIES OF SHAPE MEMORY ALLOY DURING WEDM: A COMPARATIVE STUDY. Surface Review and Letters 27:04, pages 1950136.
Crossref
Crossref
M. Prabhu & P. Shanmughasundaram. (2020) Material Characterization and Parametric Optimization of Unconventional Machining of TiN and TaC reinforced Stir Casted Vitallium Metal Matrix Composite. Materials Research 23:3.
Crossref
Crossref
Shishir Raj, Rahul, Himanshu Ranjan Sinha, Shivani, Shuvam Das, Shreetanu Guha, Aazim, Dipraj Banik & B.C Routara. (2020) Optimization of Surface Topography of Electro- Discharge Machined Super Alloy Inconel 825: Using TOPSIS Integrated with Taguchi Philosophy. Materials Today: Proceedings 24, pages 218-224.
Crossref
Crossref
Ashutosh Kumar Singh, Deepak Singhal & Ramanuj Kumar. (2020) Machining of aluminum 7075 alloy using EDM process: An ANN validation. Materials Today: Proceedings 26, pages 2839-2844.
Crossref
Crossref
Renu K. Shastri & Chinmaya P. Mohanty. (2020) Machinability investigation on Nimonic C263 alloy in electric discharge machine. Materials Today: Proceedings 26, pages 529-533.
Crossref
Crossref
Jitendra kumar & Tarun Soota. (2020) Multi-response optimization of machining parameter for Zircaloy by response surface methodology and grey relation analysis. Materials Today: Proceedings 21, pages 1544-1550.
Crossref
Crossref
A. Pramanik & A.K. Basak. (2019) Effect of wire electric discharge machining (EDM) parameters on fatigue life of Ti-6Al-4V alloy. International Journal of Fatigue 128, pages 105186.
Crossref
Crossref
Pawan Kumar, Meenu Gupta & Vineet Kumar. (2019) Microstructural analysis and multi response optimization of WEDM of Inconel 825 using RSM based desirability approach. Journal of the Mechanical Behavior of Materials 28:1, pages 39-61.
Crossref
Crossref
Rahul, Saurav Datta & Bibhuti Bhusan Biswal. (2019) Experimental studies on electro-discharge machining of Inconel 825 super alloy using cryogenically treated tool/workpiece. Measurement 145, pages 611-630.
Crossref
Crossref
Mohammad Sajjad Mahdieh & Sara Zare-Reisabadi. (2019) Effects of electro-discharge machining process on ultra-fined grain copper. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 233:15, pages 5341-5349.
Crossref
Crossref
Mithilesh K. Dikshit, Jatin Anand, Devesh Narayan & Subham Jindal. (2019) Machining characteristics and optimization of process parameters in die-sinking EDM of Inconel 625. Journal of the Brazilian Society of Mechanical Sciences and Engineering 41:7.
Crossref
Crossref
Trung-Thanh Nguyen & Quoc-Dung Duong. (2019) Optimization of WEDM process of mould material using Kriging model to improve technological performances. Sādhanā 44:6.
Crossref
Crossref
A. Pramanik, A.K. Basak & C. Prakash. (2019) Understanding the wire electrical discharge machining of Ti6Al4V alloy. Heliyon 5:4, pages e01473.
Crossref
Crossref
Anshuman Kumar Sahu, Santosh Kumar Sahu, Saurav Datta & Siba Sankar Mahapatra. (2019) Machinability Appraisement of Inconel 825 during Electro-Discharge Machining. Machinability Appraisement of Inconel 825 during Electro-Discharge Machining.
Rajiv Kumar Yadav, Anadh Gandhi, Kumar Abhishek, Siba Sankar Mahapatra & Goutam Nandi. (2019) Effect of Feed and Nose radius on various machinability criteria in dry machining of Inconel 825. Materials Today: Proceedings 18, pages 5231-5239.
Crossref
Crossref
Deepti Ranjan Sahu, Amit Kumar, Biplab Kumar Roy & Amitava Mandal. 2019. Advances in Industrial and Production Engineering. Advances in Industrial and Production Engineering
175
184
.
Rahul, Saurav Datta & Manoj Masanta. (2018) Surface Integrity and Metallurgical Characteristics of the EDMed Work Surfaces of A2 Tool Steel (SAE 304SS), Inconel 601 and Ti-6Al-4V: a Comparative Analysis. Silicon 10:4, pages 1557-1572.
Crossref
Crossref
Gangadharudu Talla, Soumya Gangopadhyay & CK Biswas. (2016) Effect of impregnated powder materials on surface integrity aspects of Inconel 625 during electrical discharge machining. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 232:7, pages 1259-1272.
Crossref
Crossref
Munmun Bhaumik & Kalipada Maity. (2017) Effect of process parameters on the surface crack density of AISI 304 in PMEDM. World Journal of Engineering 14:6, pages 475-482.
Crossref
Crossref
Kan Wang, Qinhe Zhang, Qingyu Liu, Guang Zhu & Jianhua Zhang. (2016) Experimental study on micro electrical discharge machining of porous stainless steel. The International Journal of Advanced Manufacturing Technology 90:9-12, pages 2589-2595.
Crossref
Crossref
Rahul, Saurav Datta, Bibhuti Bhusan Biswal & Siba Sankar Mahapatra. (2017) A Novel Satisfaction Function and Distance-Based Approach for Machining Performance Optimization During Electro-Discharge Machining on Super Alloy Inconel 718. Arabian Journal for Science and Engineering 42:5, pages 1999-2020.
Crossref
Crossref
Mohammad Sajjad Mahdieh & RamezanAli Mahdavinejad. (2016) Comparative Study on Electrical Discharge Machining of Ultrafine-Grain Al, Cu, and Steel. Metallurgical and Materials Transactions A 47:12, pages 6237-6247.
Crossref
Crossref
C. J. Li, J. J. Ding, S. Q. Yang, Y. S. Fang & Q. C. Kong. (2016) Discharge current shape control method and experiment in wire EDM. The International Journal of Advanced Manufacturing Technology 87:9-12, pages 3271-3278.
Crossref
Crossref
Gangadharudu Talla, S. Gangopadhyay & C. K. Biswas. (2015) Effect of Powder-Suspended Dielectric on the EDM Characteristics of Inconel 625. Journal of Materials Engineering and Performance 25:2, pages 704-717.
Crossref
Crossref
Ravinder Kataria, Ravi Pratap Singh & Jatinder Kumar. (2016) An experimental study on ultrasonic machining of Tungsten carbide-cobalt composite materials. AIMS Materials Science 3:4, pages 1391-1409.
Crossref
Crossref