Tarlochan Singh, Julfekar Arab & Shih-Chi Chen. (2023) Improvement on surface quality of Inconel-718 slits via laser cutting and wire electrochemical machining processes. Optics & Laser Technology 167, pages 109637.
Crossref
Zaichao Liu, Li Li, Jiwang Yan, Xianfu Liu, Jianbing Meng & Xue Bai. (2023) Electrical discharge machining of Ti6Al4V alloy with nitrogen gas assistance. The International Journal of Advanced Manufacturing Technology 129:5-6, pages 2609-2620.
Crossref
Kashif Ishfaq, Muhammad Sana, Muhammad Arif Mahmood, Saqib Anwar & Muhammad Umair Waseem. (2023) Evaluating Surface Quality of Inconel 617 by Employing Deep Cryogenically Treated Electrodes in Surfactant-Added Dielectrics of Transformer Oil. Metals 13:6, pages 1092.
Crossref
C. Devanathan, M.S. Natarajan, E. Shankar, R. Giri & K. Vigneshwaran. (2023) An effect of process parameters during wire cut electrical discharge machining of Inconel 738. Materials Today: Proceedings 84, pages 83-88.
Crossref
Monica C.R. Guimaraes, João B. Fogagnolo, Jose M. Paiva, Stephen C. Veldhuis & Anselmo E. Diniz. (2022) Evaluation of milling parameters on the surface integrity of welded inconel 625. Journal of Materials Research and Technology 20, pages 2611-2628.
Crossref
Oliver Voigt & Urs Alexander Peuker. (2022) Suitability of Eroded Particles from Die-Sink Electro Discharge Machining for Additive Manufacturing—Review, Characterization and Processing. Metals 12:9, pages 1447.
Crossref
Atul Raj, Joy Prakash Misra & Dinesh Khanduja. (2022) Performance evaluation of electro-spark eroded high-volume fraction of Cr-Fe-Ni superalloy. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 236:15, pages 8449-8461.
Crossref
Deepesh Sharma, Arnab Bhowmick & Ashish Goyal. (2022) Enhancing EDM performance characteristics of Inconel 625 superalloy using response surface methodology and ANFIS integrated approach. CIRP Journal of Manufacturing Science and Technology 37, pages 155-173.
Crossref
Giovani Conrado Carlini, Cristiano da Silva, Ricardo Diego Torres, Paulo Soares, Walter Lindolfo Weingaertner & Fred Lacerda Amorim. (2021) WED-machining performance by reciprocating molybdenum wire on Inconel 718 with water or hydrocarbon dielectrics. The International Journal of Advanced Manufacturing Technology 119:3-4, pages 1853-1866.
Crossref
Renu Kiran Shastri, Chinmaya Prasad Mohanty, Sitaram Dash, Karthick Muthaiah Palaniappan Gopal, A. Raja Annamalai & Chun-Ping Jen. (2022) Reviewing Performance Measures of the Die-Sinking Electrical Discharge Machining Process: Challenges and Future Scopes. Nanomaterials 12:3, pages 384.
Crossref
Ravinder Pal Singh, N.K. Batra & Sahil Dayal. (2022) Influence of machining parameters on surface roughness in AL6063-W composite by wire EDM process: Experimental investigations and process optimization. Materials Today: Proceedings 63, pages 192-196.
Crossref
Anish Nair, Kumanan S & Shanavas K P. (2022) Multi-performance optimization in wire EDM of Inconel 617 using GRA and genetic algorithm. Materials Today: Proceedings 50, pages 1354-1366.
Crossref
Md Ehsan Asgar & Ajay Kumar Singh Singholi. (2021) Analysis of control factors and surface integrity during wire-EDM of Inconel 718 alloy using T-GRA approach. EMITTER International Journal of Engineering Technology 9:2, pages 294-312.
Crossref
Ferhat CERİTBİNMEZ & Ahmet YAPICI. (2021) Sleipner Soğuk İş Takım Çeliğinin Elektro-Erozyon Tezgahında Bakır Krom Zirkonyum Alaşımı Elektrot ile İşlenmesinde İşleme Parametrelerinin Kerf ve Yüzey Pürüzlülüğü Üzerine Etkisinin İncelenmesiInvestigation of the Effect of Processing Parameters on Kerf and Surface Roughness in the Machining of Sleipner Cold Work Tool Steel with Copper Chromium Zirconium Alloy Electrode in Electro-Erosion Machine. Karadeniz Fen Bilimleri Dergisi 11:2, pages 570-583.
Crossref
A. Pramanik, A. K. Basak, C. Prakash, S. Shankar, Shubham Sharma & S. Narendranath. (2021) Recast Layer Formation during Wire Electrical Discharge Machining of Titanium (Ti-Al6-V4) Alloy. Journal of Materials Engineering and Performance 30:12, pages 8926-8935.
Crossref
Sahil Sharma, Umesh Kumar Vates & Amit Bansal. (2021) Influence of die-sinking EDM parameters on machining characteristics of alloy 625 and alloy 718: A comparative analysis. Materials Today: Proceedings.
Crossref
Arminder Singh Walia, Vineet Srivastava, Prashant S Rana, Nalin Somani, Nitin Kumar Gupta, Gurminder Singh, Danil Yurievich Pimenov, Tadeusz Mikolajczyk & Navneet Khanna. (2021) Prediction of Tool Shape in Electrical Discharge Machining of EN31 Steel Using Machine Learning Techniques. Metals 11:11, pages 1668.
Crossref
Ramesh Nadupuru & K. N. S. Suman. (2021) Experimental investigation and evaluation of EDM characteristics of inconel 718 material with and without assistance of magnet. International Journal on Interactive Design and Manufacturing (IJIDeM) 15:2-3, pages 225-238.
Crossref
Thrinadh Jadam, Rahul, Saurav Datta & Siba Sankar Mahapatra. (2019) Electro-discharge Machining (EDM) of Superalloy Inconel 718 Using Triangular Cross-Sectioned Copper Tool Electrode: Emphasis on Topography and Metallurgical Characteristics of the EDMed Work Surface. Proceedings of the National Academy of Sciences, India Section A: Physical Sciences 91:1, pages 123-134.
Crossref
Jan Burek, Robert Babiarz, Jarosław Buk, Paweł Sułkowicz & Krzysztof Krupa. (2021) The Accuracy of Finishing WEDM of Inconel 718 Turbine Disc Fir Tree Slots. Materials 14:3, pages 562.
Crossref
Narayanasamy Ananthi, Uthirapathi Elaiyarasan, Vinaitheerthan Satheeshkumar, Chinnamuthu Senthilkumar, Subbarayan Sathiyamurthy & Kaliyamoorthi Nallathambi. (2021) Parametric effect on material removal rate and surface roughness of electrical discharge machined magnesium alloy. Metallurgical Research & Technology 118:6, pages 615.
Crossref
D. Devarasiddappa & M. Chandrasekaran. (2021) Fuzzy logic modelling of sustainable performance measure (MRR) during WEDM of Ti/6Al/4V alloy. Materials Today: Proceedings 46, pages 3373-3378.
Crossref
D. Palanisamy, N. Manikandan, J.S. Binoj, R. Ramesh & T.D. Shankar Narayana. (2021) Performance comparison of artificial neural network and multiple regression models for wire electrical discharge machining of haste alloy. Materials Today: Proceedings 39, pages 524-532.
Crossref
D. Palanisamy, N. Manikandan, R. Ramesh, A. Devaraju & D. ArulKirubakaran. (2021) Development of neural network models for wire electrical discharge machining of Haste alloy. Materials Today: Proceedings 39, pages 438-445.
Crossref
N. Manikandan, J.S. Binoj, P. Thejasree, P. Sasikala & P. Anusha. (2021) Application of Taguchi method on Wire Electrical Discharge Machining of Inconel 625. Materials Today: Proceedings 39, pages 121-125.
Crossref
Soni Kumari, Gobinda Chandra Behera, Santosh Kumar Sahu, Saurav Datta, Goutam Nandi & Pradip Kumar Pal. 2021. Advances in Engineering Materials. Advances in Engineering Materials
149
159
.
Soni Kumari, Thrinadh Jadam, Gobinda Chandra Behera, Santosh Kumar Sahu, Saurav Datta, Goutam Nandi & Pradip Kumar. 2021. Recent Advances in Mechanical Infrastructure. Recent Advances in Mechanical Infrastructure
83
94
.
Nehem Tudu, Mayuri Baruah, Shashi Bhushan Prasad & Christ Prakash Paul. 2021. Next Generation Materials and Processing Technologies. Next Generation Materials and Processing Technologies
185
207
.
Mukesh Kumar Choudhary, V. Dhinakaran & T. Jagadeesha. 2021. Advances in Industrial Automation and Smart Manufacturing. Advances in Industrial Automation and Smart Manufacturing
397
406
.
Mukesh Kumar Choudhary, V. Dhinakaran & T. Jagadeesha. 2021. Advances in Industrial Automation and Smart Manufacturing. Advances in Industrial Automation and Smart Manufacturing
275
283
.
Rohit Sharsar, Sudipta Ghosh, Madhab Chandra Mandal & Amitava Ray. 2021. Optimization Methods in Engineering. Optimization Methods in Engineering
549
566
.
Vishal Sharma & Kazi Sabiruddin. (2020) A comparative study of sand-blasted and electro-discharge-machined surfaces of steel substrates. Sādhanā 45:1.
Crossref
Stefan Dzionk & Mieczysław S. Siemiątkowski. (2020) Studying the Effect of Working Conditions on WEDM Machining Performance of Super Alloy Inconel 617. Machines 8:3, pages 54.
Crossref
Jiongbo Fu, Mingbo Qiu, Lida Shen, Linglei Kong & Jianjian Ma. (2020) On processing of Inconel718 through multi-channel discharge ablation. Journal of Manufacturing Processes 57, pages 462-468.
Crossref
Ruben Phipon, Ishwer Shivakoti & Ashis Sharma. (2020) Sustainable processing of Inconel 718 super alloy in electrical discharge machining process. World Journal of Engineering 17:5, pages 687-695.
Crossref
B.P. Mishra & B.C. Routara. (2020) Evaluation of technical feasibility and environmental impact of Calophyllum Inophyllum (Polanga) oil based bio-dielectric fluid for green EDM. Measurement 159, pages 107744.
Crossref
Vitor Baldin, Claudia Regina Bernardi Baldin, Alisson Rocha Machado & Fred Lacerda Amorim. (2020) Machining of Inconel 718 with a defined geometry tool or by electrical discharge machining. Journal of the Brazilian Society of Mechanical Sciences and Engineering 42:5.
Crossref
D. Devarasiddappa, M. Chandrasekaran & R. Arunachalam. (2020) Experimental investigation and parametric optimization for minimizing surface roughness during WEDM of Ti6Al4V alloy using modified TLBO algorithm. Journal of the Brazilian Society of Mechanical Sciences and Engineering 42:3.
Crossref
K Mouralova, T Prokes & L Benes. (2019) Analysis of the oxide occurrence on WEDM surfaces in relation to subsequent surface treatments. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 234:3, pages 721-733.
Crossref
S. Rajamanickam, J. Prasanna & C. Chandrasekhara Sastry. (2020) Analysis of high aspect ratio small holes in rapid electrical discharge machining of superalloys using Taguchi and TOPSIS. Journal of the Brazilian Society of Mechanical Sciences and Engineering 42:2.
Crossref
M. Adam Khan & Kapil Gupta. (2019) On Heat Treatment and Surface Characterization of Spark Eroded Nickel-Based Superalloy Developed by Additive Manufacturing. Transactions of the Indian Institute of Metals 73:2, pages 429-439.
Crossref
A. Pramanik & A.K. Basak. (2019) Effect of wire electric discharge machining (EDM) parameters on fatigue life of Ti-6Al-4V alloy. International Journal of Fatigue 128, pages 105186.
Crossref
Pawan Kumar, Meenu Gupta & Vineet Kumar. (2019) Microstructural analysis and multi response optimization of WEDM of Inconel 825 using RSM based desirability approach. Journal of the Mechanical Behavior of Materials 28:1, pages 39-61.
Crossref
Lin Gu, Yingmou Zhu, Guojian He, Ahmad Farhadi & Wansheng Zhao. (2019) Coupled numerical simulation of arc plasma channel evolution and discharge crater formation in arc discharge machining. International Journal of Heat and Mass Transfer 135, pages 674-684.
Crossref
Abhijit Saha & Subhas Chandra Mondal. (2018) Statistical Analysis and Optimization of Process Parameters in Wire Cut Machining of Welded Nanostructured Hardfacing Material. Silicon 11:3, pages 1313-1326.
Crossref
Arminder Singh Walia, Vivek Jain & Vineet Srivastava. (2019) Development and performance evaluation of sintered tool tip while EDMing of hardened steel. Materials Research Express 6:8, pages 086520.
Crossref
Dileep Kumar Mishra, ▪ Rahul, Saurav Datta, Manoj Masanta & Siba Sankar Mahapatra. (2018) Through hole making by electro-discharge machining on Inconel 625 super alloy using hollow copper tool electrode. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering 233:2, pages 348-370.
Crossref
Rahul, Saurav Datta, Bibhuti Bhusan Biswal & Siba Sankar Mahapatra. (2019) Machinability analysis of Inconel 601, 625, 718 and 825 during electro-discharge machining: On evaluation of optimal parameters setting. Measurement 137, pages 382-400.
Crossref
A. Pramanik, A.K. Basak & C. Prakash. (2019) Understanding the wire electrical discharge machining of Ti6Al4V alloy. Heliyon 5:4, pages e01473.
Crossref
Rahul & Saurav Datta. (2019) Electrical Discharge Machining Performance of Deep Cryogenically Treated Inconel 825 Superalloy: Emphasis on Surface Integrity. Metallography, Microstructure, and Analysis 8:2, pages 212-225.
Crossref
Afzaal Ahmed, M.T. Lew, P. Diwakar, A. Senthil Kumar & M. Rahman. (2019) A novel approach in high performance deep hole drilling of Inconel 718. Precision Engineering 56, pages 432-437.
Crossref
Jonas Holmberg, Johan Berglund, Anders Wretland & Tomas Beno. (2018) Evaluation of surface integrity after high energy machining with EDM, laser beam machining and abrasive water jet machining of alloy 718. The International Journal of Advanced Manufacturing Technology 100:5-8, pages 1575-1591.
Crossref
Anthony Xavior M & Ashwath p. (2019) Fatigue life and Fracture Morphology of Inconel 718 machined by spark EDM process. Procedia Manufacturing 30, pages 292-299.
Crossref
Li Wang, Guanxin Chi, Lan Chen & Yongfeng Guo. (2018) Interfacial Characteristics Investigation for One-Step EDM Drilling of Cooling Holes in TBCs. Journal of Materials Engineering and Performance 27:12, pages 6719-6728.
Crossref
Soni Kumari, Saurav Datta, Manoj Masanta, Goutam Nandi & Pradip Kumar Pal. (2018) Electro-Discharge Machining of Inconel 825 Super alloy: Effects of Tool Material and Dielectric Flushing. Silicon 10:5, pages 2079-2099.
Crossref
Kashif Ishfaq, Nadeem Ahmad Mufti, Naveed Ahmed, Mohammad Pervez Mughal & Muhammad Qaiser Saleem. (2018) An investigation of surface roughness and parametric optimization during wire electric discharge machining of cladded material. The International Journal of Advanced Manufacturing Technology 97:9-12, pages 4065-4079.
Crossref
Shalini Mohanty, Vishnu Kumar, Rashi Tyagi, Shakti Kumar, Brij Bhushan, Alok Kumar Das & Amit Rai Dixit. (2018) Surface alloying using tungsten disulphide powder mixed in dielectric in micro-EDM on Ti6Al4V. IOP Conference Series: Materials Science and Engineering 377, pages 012040.
Crossref
Priyaranjan Sharma, Ashis Tripathy & Narayan Sahoo. (2018) Evaluation of surface integrity of WEDM processed inconel 718 for jet engine application. IOP Conference Series: Materials Science and Engineering 323, pages 012019.
Crossref
Bighnesh Kumar Sahu, Saurav Datta & Siba Sankar Mahapatra. (2018) On Electro-Discharge Machining of Inconel 718 Super Alloys: An Experimental Investigation. Materials Today: Proceedings 5:2, pages 4861-4869.
Crossref
Thrinadh Jadam, Saurav Datta & Siba Sankar Mahapatra. (2018) Electro-Discharge Machining of Inconel 718 Using Square Cross Sectioned Copper Tool Electrode: Studies on Topography and Metallurgical Features of the EDMed Work Surface. Materials Today: Proceedings 5:2, pages 4847-4854.
Crossref
K.D. Mohapatra, V.B. Shaibu & S.K. Sahoo. (2018) Modeling and Analysis of Wire EDM in a Gear Cutting Process for a 2D Model. Materials Today: Proceedings 5:2, pages 4793-4802.
Crossref
L. Selvarajan, D. Katherasan, B. Srivijai, R. Rajavel & M. Ramamoorthi. (2018) Experimental Analysis of EN 19 Alloy Material on EDM for Improving Geometrical Errors Using Copper Pentagon Shaped Electrode. Materials Today: Proceedings 5:2, pages 4508-4514.
Crossref
Rahul, Ankur Srivastava, Dileep Kumar Mishra, Suman Chatterjee, Saurav Datta, Bibhuti Bhusan Biswal & Siba Sankar Mahapatra. (2018) Multi-Response Optimization during Electro-Discharge Machining of Super Alloy Inconel 718: Application of PCA-TOPSIS. Materials Today: Proceedings 5:2, pages 4269-4276.
Crossref
Kan Wang, Qinhe Zhang, Guang Zhu, Qingyu Liu & Yuhua Huang. (2017) Experimental study on micro electrical discharge machining with helical electrode. The International Journal of Advanced Manufacturing Technology 93:5-8, pages 2639-2645.
Crossref
Rahul, Kumar Abhishek, Saurav Datta, Bibhuti Bhusan Biswal & Siba Sankar Mahapatra. (2016) Machining performance optimization for electro-discharge machining of Inconel 601, 625, 718 and 825: an integrated optimization route combining satisfaction function, fuzzy inference system and Taguchi approach. Journal of the Brazilian Society of Mechanical Sciences and Engineering 39:9, pages 3499-3527.
Crossref
Abhijit Saha & Subhas Chandra Mondal. (2016) Experimental investigation and modelling of WEDM process for machining nano-structured hardfacing material. Journal of the Brazilian Society of Mechanical Sciences and Engineering 39:9, pages 3439-3455.
Crossref
Rahul, Saurav Datta, Bibhuti Bhusan Biswal & Siba Sankar Mahapatra. (2017) A Novel Satisfaction Function and Distance-Based Approach for Machining Performance Optimization During Electro-Discharge Machining on Super Alloy Inconel 718. Arabian Journal for Science and Engineering 42:5, pages 1999-2020.
Crossref
Rahul, Saurav Datta, Bibhuti Bhusan Biswal & Siba Sankar Mahapatra. (2017) Electrical discharge machining of Inconel 825 using cryogenically treated copper electrode: Emphasis on surface integrity and metallurgical characteristics. Journal of Manufacturing Processes 26, pages 188-202.
Crossref
Thrinadh Jadam, Chandramani Upadhyay, Saurav Datta, Soumya Gangopadhyay & Siba Sankar Mahapatra. (2017) Analysis on topography and metallurgical aspects of EDMed work surface of Inconel 718 obtained using triangular cross sectioned copper tool electrode. Analysis on topography and metallurgical aspects of EDMed work surface of Inconel 718 obtained using triangular cross sectioned copper tool electrode.
Abhijit Saha & Subhas Chandra Mondal. 2017. Research into Design for Communities, Volume 1. Research into Design for Communities, Volume 1
905
917
.
N. Pragadish & M. Pradeep Kumar. (2016) Optimization of Dry EDM Process Parameters Using Grey Relational Analysis. Arabian Journal for Science and Engineering 41:11, pages 4383-4390.
Crossref
Yongfeng Guo, Guowei Zhang, Li Wang & Yehui Hu. (2015) Optimization of parameters for EDM drilling of thermal-barrier-coated nickel superalloys using gray relational analysis method. The International Journal of Advanced Manufacturing Technology 83:9-12, pages 1595-1605.
Crossref