Citations (63)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (19)
Shwetanshu Gaurav, R.S. Mishra & M. Zunaid. (2023) Enhancement of microstructure and mechanical properties of similar and dissimilar aluminium alloy by friction stir welding/processing using nanoparticles: a review. Journal of Adhesion Science and Technology 37:22, pages 3125-3166.
Read now
Read now
Ishwargouda S Patil, Anarghya A, Shrikantha S Rao, Mervin a Herbert & Rohit Kushwaha. (2023) Effect of zirconium oxide particulate composites with Al-Si on the microstructural and mechanical properties of hot pressed, spray forming and stir casting methods. Australian Journal of Mechanical Engineering 21:3, pages 756-774.
Read now
Read now
Harshadkumar Jadav, Vishvesh Badheka, Gautam Upadhyay & Kush Mehta. (2022) Dissimilar welding of magnesium alloy to aluminium alloy: a review. Advances in Materials and Processing Technologies 8:4, pages 3794-3821.
Read now
Read now
Omid Karimi-Dermani, Alireza Abbasi, Ghasem Azimi Roeen & Mohammad Javad Nayyeri. (2022) A novel approach to dissimilar joining of AA7075 to AZ31B by friction stir soldering using Sn intermediate layer. Materials and Manufacturing Processes 37:8, pages 942-955.
Read now
Read now
Behrouz Bagheri, Mahmoud Abbasi, Farzaneh Sharifi & Amin Abdollahzadeh. (2022) Investigation into novel multipass friction stir vibration brazing of carbon steels. Materials and Manufacturing Processes 37:8, pages 921-932.
Read now
Read now
Manoj Kumar Gupta. (2020) Effects of tool profile on mechanical properties of aluminium alloy Al 1120 friction stir welds. Journal of Adhesion Science and Technology 34:18, pages 2000-2010.
Read now
Read now
A.H. Ghavimi, M.R. Aboutalebi & S.H. Seyedein. (2020) Exit-hole repairing in friction stir welding of AA5456 pipe using consumable pin. Materials and Manufacturing Processes 35:11, pages 1240-1250.
Read now
Read now
Sameer Mohammed & Anil Kumar Birru. (2019) Friction Stir Welding of AA6082 Thin Aluminium Alloy Reinforced with Al2O3 Nanoparticles. Transactions of the Indian Ceramic Society 78:3, pages 137-145.
Read now
Read now
Kishan Fuse & Vishvesh Badheka. (2019) Bobbin tool friction stir welding: a review. Science and Technology of Welding and Joining 24:4, pages 277-304.
Read now
Read now
V. K. Parikh, A. D. Badgujar & N. D. Ghetiya. (2019) Joining of metal matrix composites using friction stir welding: a review. Materials and Manufacturing Processes 34:2, pages 123-146.
Read now
Read now
A. Gnanavelbabu, Kaliyamoorthy Rajkumar & P. Saravanan. (2018) Investigation on the cutting quality characteristics of abrasive water jet machining of AA6061-B4C-hBN hybrid metal matrix composites. Materials and Manufacturing Processes 33:12, pages 1313-1323.
Read now
Read now
Abhishek Sharma, Vyas Mani Sharma, Sanchit Mewar, Surjya Kanta Pal & Jinu Paul. (2018) Friction stir processing of Al6061-SiC-graphite hybrid surface composites. Materials and Manufacturing Processes 33:7, pages 795-804.
Read now
Read now
H. Rana, Vishvesh Badheka, Abhishek Kumar & Akkireddy Satyaprasad. (2018) Strategical parametric investigation on manufacturing of Al–Mg–Zn–Cu alloy surface composites using FSP. Materials and Manufacturing Processes 33:5, pages 534-545.
Read now
Read now
Jitender Kundu & Hari Singh. (2018) Modelling and analysis of process parameters in friction stir welding of AA5083-H321 using response surface methodology. Advances in Materials and Processing Technologies 4:2, pages 183-199.
Read now
Read now
Wenming Jiang, Zailiang Jiang, Guangyu Li, Yao Wu & Zitian Fan. (2018) Microstructure of Al/Al bimetallic composites by lost foam casting with Zn interlayer. Materials Science and Technology 34:4, pages 487-492.
Read now
Read now
Prakash Kumar Sahu & Sukhomay Pal. (2018) Effect of FSW parameters on microstructure and mechanical properties of AM20 welds. Materials and Manufacturing Processes 33:3, pages 288-298.
Read now
Read now
S. Rajesh & Vishvesh Badheka. (2018) Influence of heat input/multiple passes and post weld heat treatment on strength/electrochemical characteristics of friction stir weld joint. Materials and Manufacturing Processes 33:2, pages 156-164.
Read now
Read now
Suo Fan, Wenming Jiang, Guangyu Li, Jianhua Mo & Zitian Fan. (2017) Fabrication and microstructure evolution of Al/Mg bimetal using a near-net forming process. Materials and Manufacturing Processes 32:12, pages 1391-1397.
Read now
Read now
Vipin Sharma, Yashpal Gupta, B. V. Manoj Kumar & Ujjwal Prakash. (2016) Friction Stir Processing Strategies for Uniform Distribution of Reinforcement in a Surface Composite. Materials and Manufacturing Processes 31:10, pages 1384-1392.
Read now
Read now
Articles from other publishers (44)
Keegan Zass, Sipokazi Mabuwa & Velaphi Msomi. (2023) Introduction of Coal Reinforcing Particles on the Dissimilar FSW AA608/AA5083 Joint via Friction Stir Processing. Metals 13:12, pages 1981.
Crossref
Crossref
Giresse N. Kasiama, Carlos N. Kabengele, Jason T. Kilembe, Jules M. Kitadi, Michel Mifundu, Jean Paul Ngbolua, Damien S.T. Tshibangu, Dorothée D. Tshilanda & Pius T. Tshimankinda. (2023) Green Synthesis, Characterization and Evaluation of Biological Activities of Ag-Mno Nanocomposites from Cyttaranthus Congolensis.. Diyala Journal of Engineering Sciences, pages 24-36.
Crossref
Crossref
ShivaKumar G N & Rajamurugan G. (2022) Understanding the effect of particle reinforcement on friction stir weldment: A review. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 237:6, pages 1231-1250.
Crossref
Crossref
Tanvir Singh. (2023) Nanoparticles reinforced joints produced using friction stir welding: a review. Engineering Research Express 5:2, pages 022001.
Crossref
Crossref
ST Selvamani, M Bakkiyaraj, V Balasubramanian, A Ramesh & MD Vijayakumar. (2022) Investigation of heat input effects on the joint characteristics of CMT welded Aa6061 sheets. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 237:10, pages 2328-2345.
Crossref
Crossref
Yongchao Jian & Yan Shi. (2023) Effect of Y-groove morphology on welding performance of SiCp/Al composites in powder filled laser welding. Ceramics International.
Crossref
Crossref
Amit Kumar Kundu, Manoj Kumar Gupta, Nitesh Singh Rajput & Rajesh Rathore. (2022) Adhesive assisted TiB2 coating effects on friction stir welded joints. Scientific Reports 12:1.
Crossref
Crossref
G N ShivaKumar & G Rajamurugan. (2022) Friction stir welding of dissimilar alloy combinations—A Review. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 236:12, pages 6688-6705.
Crossref
Crossref
Radha R., Sreekanth D., Tushar Bohra & Surya Bhan Pratap Singh. 2022. Handbook of Research on Advancements in the Processing, Characterization, and Application of Lightweight Materials. Handbook of Research on Advancements in the Processing, Characterization, and Application of Lightweight Materials
206
214
.
Keegan Zass, Sipokazi Mabuwa & Velaphi Msomi. (2022) A review on reinforced particles used on the production of FSP composites. Materials Today: Proceedings 56, pages 2392-2397.
Crossref
Crossref
K.S. Anil Kumar. (2022) Effect of tool plunge depth (TPD) on the microstructure and mechanical properties of FSW dissimilar joints reinforced with SiC nano particles. Materials Today: Proceedings 52, pages 355-360.
Crossref
Crossref
Fausto Tucci, Pierpaolo Carlone, Alessia Teresa Silvestri, Hetal Parmar & Antonello Astarita. (2021) Dissimilar friction stir lap welding of AA2198-AA6082: Process analysis and joint characterization. CIRP Journal of Manufacturing Science and Technology 35, pages 753-764.
Crossref
Crossref
Arun M.Muthukumaran M.Balasubramanian S.. (2021)
Tribological characterization of friction stir welded dissimilar aluminum alloy AA6061–AA5083 reinforced with CeO
2
and La
2
O
3
nanoparticles
. Industrial Lubrication and Tribology 73:5, pages 783-788.
Crossref
Crossref
Narayanan Murali, Maximilian Sokoluk, Gongcheng Yao, Shuaihang Pan, Igor De Rosa & Xiaochun Li. (2021) Gas-Tungsten Arc Welding of Dissimilar Aluminum Alloys With Nano-Treated Filler. Journal of Manufacturing Science and Engineering 143:8.
Crossref
Crossref
Manu Srivastava & Sandeep Rathee. (2020) A Study on the Effect of Incorporation of SiC Particles during Friction Stir Welding of Al 5059 Alloy. Silicon 13:7, pages 2209-2219.
Crossref
Crossref
Farhad BAKHTIARI ARGESI, Ali SHAMSIPUR & Seyyed Ehsan MIRSALEHI. (2021) Preparation of bimetallic nano-composite by dissimilar friction stir welding of copper to aluminum alloy. Transactions of Nonferrous Metals Society of China 31:5, pages 1363-1380.
Crossref
Crossref
T. N. Odiaka, S. A. Akinlabi, N. Madushele, S. Hassan & E. T. Akinlabi. (2021) Experimental investigation of titanium alloy powder reinforcement in GMAW mild steel lap joints. Journal of the Brazilian Society of Mechanical Sciences and Engineering 43:3.
Crossref
Crossref
Cyril Vimalraj & Paul Kah. (2021) Experimental Review on Friction Stir Welding of Aluminium Alloys with Nanoparticles. Metals 11:3, pages 390.
Crossref
Crossref
Timothy Odiaka, Stephen A. Akinlabi, Nkosinathi Madushele, Olawale S. Fatoba, Surnir Hassan & Esther T. Akinlabi. (2021) Statistical analysis of the effect of welding parameters on the tensile strength of titanium reinforced mild steel joints using taguchi’s DoE. Materials Today: Proceedings 44, pages 1202-1206.
Crossref
Crossref
Timothy Odiaka, Stephen A. Akinlabi, Nkosinathi Madushele, Olawale S. Fatoba, Sunir Hassan, Zwalinzima Mkoko & Esther T. Akinlabi. (2021) Numerical analysis of butt and lap welded titanium reinforced mild steel joints. Materials Today: Proceedings 44, pages 1175-1184.
Crossref
Crossref
Sufian Raja, Mohd Ridha Muhamad, Mohd Fadzil Jamaludin & Farazila Yusof. (2020) A review on nanomaterials reinforcement in friction stir welding. Journal of Materials Research and Technology 9:6, pages 16459-16487.
Crossref
Crossref
Danial Ghahremani-Moghadam & Seyedmeysam Khaleghian. (2020) Microstructure and Mechanical Properties of Friction Stir Welded and Processed Joints with the Addition of Nanoparticles: A Review. Current Biochemical Engineering 6:2, pages 82-90.
Crossref
Crossref
Behrooz Rahmatian, Kamran Dehghani & Seyyed Ehsan Mirsalehi. (2020) Effect of adding SiC nanoparticles to nugget zone of thick AA5083 aluminium alloy joined by using double-sided friction stir welding. Journal of Manufacturing Processes 52, pages 152-164.
Crossref
Crossref
H. P. Kyriakopoulou, C. N. Farantos, A. Vazdirvanidis, Α.G. Markoulis, C. A. Xanthis, E. V. Chatzidouros & D. I. Pantelis. (2019) Investigation of the Hydrogen Embrittlement Susceptibility of AA5083-H111 and AA6082-T6 Dissimilar Friction Stir Welds. Journal of Materials Engineering and Performance 28:12, pages 7687-7701.
Crossref
Crossref
Sameer MD & Anil Kumar Birru. (2019) Mechanical and metallurgical properties of friction stir welded dissimilar joints of AZ91 magnesium alloy and AA 6082-T6 aluminium alloy. Journal of Magnesium and Alloys 7:2, pages 264-271.
Crossref
Crossref
P. N. Karakizis, D. I. Pantelis, D. A. Dragatogiannis, V. D. Bougiouri & C. A. Charitidis. (2019) Study of friction stir butt welding between thin plates of AA5754 and mild steel for automotive applications. The International Journal of Advanced Manufacturing Technology 102:9-12, pages 3065-3076.
Crossref
Crossref
Harikrishna Rana & Vishvesh Badheka. (2017)
Elucidation of the role of rotation speed and stirring direction on AA 7075-B
4
C surface composites formulated by friction stir processing
. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 233:5, pages 977-994.
Crossref
Crossref
Karinanjanapura Shivamurthy Anil Kumar, Siddlingalli Mahadevappa Murigendrappa & Hemantha Kumar. (2019) Experimental investigation on effects of varying volume fractions of SiC nanoparticle reinforcement on microstructure and mechanical properties in friction-stir-welded dissimilar joints of AA2024-T351 and AA7075-T651. Journal of Materials Research 34:07, pages 1229-1247.
Crossref
Crossref
Nahit Öztoprak, Ç. Emine Yeni & B. Gören Kıral. (2018) Dissimilar Friction Stir Butt Welding of AA6061-T6 and AA6061/SiCp Composite: Microstructural Characteristics, Impact Toughness, Hardness, Strength Under Transverse Impact. Transactions of the Indian Institute of Metals 72:2, pages 511-521.
Crossref
Crossref
M. D. Sameer & Anil Kumar Birru. (2018) Investigations on Microstructural Evolutions and Mechanical Properties of Dual-Phase 600 Steel and AA6082-T6 Aluminum Alloy Dissimilar Joints Fabricated by Friction Stir Welding. Transactions of the Indian Institute of Metals 72:2, pages 353-367.
Crossref
Crossref
A. Abdollahzadeh, A. Shokuhfar, J.M. Cabrera, A.P. Zhilyaev & H. Omidvar. (2019) In-situ nanocomposite in friction stir welding of 6061-T6 aluminum alloy to AZ31 magnesium alloy. Journal of Materials Processing Technology 263, pages 296-307.
Crossref
Crossref
Nahit Oztoprak, Cınar Emine Yeni & Binnur Goren Kiral. (2018) Effects of post-weld heat treatment on the microstructural evolution and mechanical properties of dissimilar friction stir welded AA6061+SiCp/AA6061-O joint. Latin American Journal of Solids and Structures 15:8.
Crossref
Crossref
I. G. Papantoniou, H. P. Kyriakopoulou, D. I. Pantelis & D. E. Manolakos. (2018) Fabrication of MWCNT-reinforced Al composite local foams using friction stir processing route. The International Journal of Advanced Manufacturing Technology 97:1-4, pages 675-686.
Crossref
Crossref
Noor Zaman Khan, Mohammed Ubaid, Arshad Noor Siddiquee, Zahid A Khan, Abdulrahman Al-Ahmari, Xizhang Chen & Mustufa Haider Abidi. (2018) Microstructural features of friction stir welded dissimilar Aluminium alloys AA2219-AA7475. Materials Research Express 5:5, pages 056531.
Crossref
Crossref
P. N. Karakizis, D. I. Pantelis, G. Fourlaris & P. Tsakiridis. (2017) Effect of SiC and TiC nanoparticle reinforcement on the microstructure, microhardness, and tensile performance of AA6082-T6 friction stir welds. The International Journal of Advanced Manufacturing Technology 95:9-12, pages 3823-3837.
Crossref
Crossref
I. G. Papantoniou, H. P. Kyriakopoulou, D. I. Pantelis, A. Athanasiou-Ioannou & D. E. Manolakos. (2017) Manufacturing process of AA5083/nano-γAl2O3 localized composite metal foam fabricated by friction stir processing route (FSP) and microstructural characterization. Journal of Materials Science 53:5, pages 3817-3835.
Crossref
Crossref
P. N. Karakizis, D. I. Pantelis, G. Fourlaris & P. Tsakiridis. (2017) The role of SiC and TiC nanoparticle reinforcement on AA5083-H111 friction stir welds studied by electron microscopy and mechanical testing. The International Journal of Advanced Manufacturing Technology 94:9-12, pages 4159-4176.
Crossref
Crossref
S.T. Azeez & E.T. Akinlabi. (2018) Effect of processing parameters on microhardness and microstructure of a double-sided dissimilar friction stir welded aa6082-t6 and aa7075-t6 aluminum alloy. Materials Today: Proceedings 5:9, pages 18315-18324.
Crossref
Crossref
E. Jasiūnienė, E. Žukauskas, D.A. Dragatogiannis, E.P. Koumoulos & C.A. Charitidis. (2017) Investigation of dissimilar metal joints with nanoparticle fillers. NDT & E International 92, pages 122-129.
Crossref
Crossref
A.A. Fallahi, A. Shokuhfar, A. Ostovari Moghaddam & A. Abdolahzadeh. (2017) Analysis of SiC nano-powder effects on friction stir welding of dissimilar Al-Mg alloy to A316L stainless steel. Journal of Manufacturing Processes 30, pages 418-430.
Crossref
Crossref
M. Sarkari Khorrami, M. Kazeminezhad, Y. Miyashita & A. H. Kokabi. (2017) Improvement in the mechanical properties of Al/SiC nanocomposites fabricated by severe plastic deformation and friction stir processing. International Journal of Minerals, Metallurgy, and Materials 24:3, pages 297-308.
Crossref
Crossref
R. Beygi, M. Zarezadeh Mehrizi & G. Eisaabadi B. (2017) Friction Stir Processing of Al with Mechanically Alloyed Al-TiO2-Graphite Powder: Microstructure and Mechanical Properties. Journal of Materials Engineering and Performance 26:3, pages 1455-1462.
Crossref
Crossref
N. M. Daniolos & D. I. Pantelis. (2016) Microstructural and mechanical properties of dissimilar friction stir welds between AA6082-T6 and AA7075-T651. The International Journal of Advanced Manufacturing Technology 88:9-12, pages 2497-2505.
Crossref
Crossref
I.A. Kartsonakis, D.A. Dragatogiannis, E.P. Koumoulos, A. Karantonis & C.A. Charitidis. (2016) Corrosion behaviour of dissimilar friction stir welded aluminium alloys reinforced with nanoadditives. Materials & Design 102, pages 56-67.
Crossref
Crossref