Citations (79)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (24)
Monika Singh, Akshay Dvivedi & Pradeep Kumar. (2023) Dimensional accuracy enhancement of machined-hole through UAECDM-process under the magnetic-field-assistance. Materials and Manufacturing Processes 0:0, pages 1-17.
Read now
Read now
Dil Bahar, Akshay Dvivedi & Pradeep Kumar. (2023) On innovative approach in ECDM process by controlling the temperature and stirring rate of the electrolyte. Materials and Manufacturing Processes 0:0, pages 1-19.
Read now
Read now
K. V. J. Bhargav, P. S. Balaji, Ranjeet Kumar Sahu & Jitendra Kumar Katiyar. (2023) Exemplary approach using tool rotation-assisted µ-ECDM for CFRP composites machining. Materials and Manufacturing Processes 38:3, pages 271-283.
Read now
Read now
K. V. J. Bhargav, P. S. Balaji & Ranjeet Kumar Sahu. (2023) Micromachining of borosilicate glass using an electrolyte-sonicated-µ-ECDM system. Materials and Manufacturing Processes 38:1, pages 64-77.
Read now
Read now
Inderjeet Singh Sandhu, Saurabh Kumar Maurya & Alakesh Manna. (2022) Investigation of electrochemical discharge machining process variables during µ - drilling on stir casted novel Zn/ (Ag+ Fe)-MMC for biomedical applications. Advances in Materials and Processing Technologies 0:0, pages 1-19.
Read now
Read now
Tarlochan Singh & Akshay Dvivedi. (2022) On energy channelization analysis for ECSM process during fabrication of microchannels in glass. Materials and Manufacturing Processes 37:13, pages 1506-1510.
Read now
Read now
Sahil Sharma, Tarlochan Singh & Akshay Dvivedi. (2022) Developments in tandem micro-machining processes to mitigate the machining issues at micron level: a systematic review, challenges and future opportunities. Machining Science and Technology 26:4, pages 515-570.
Read now
Read now
Lijo Paul, S H Hiremath, Jalumedi Babu & Libin V K. (2022) Effect of sensing mechanism on machining performance of ECDM process. Advances in Materials and Processing Technologies 8:3, pages 2871-2880.
Read now
Read now
Tarlochan Singh & Akshay Dvivedi. (2022) Impact of gas film thickness on the performance of RM-ECDM process during machining of glass. Materials and Manufacturing Processes 37:6, pages 652-663.
Read now
Read now
Tarlochan Singh, Julfekar Arab & Pradeep Dixit. (2022) A review on microholes formation in glass-based substrates by electrochemical discharge drilling for MEMS applications. Machining Science and Technology 26:2, pages 276-337.
Read now
Read now
Priyaranjan Sharma & Pradeep Dixit. (2022) Investigation of tool wear in alumina micromachining by multi-tip ECDM. Materials and Manufacturing Processes 37:3, pages 342-348.
Read now
Read now
Priyaranjan Sharma, Julfekar Arab & Pradeep Dixit. (2021) Through-holes micromachining of alumina using a combined pulse-feed approach in ECDM. Materials and Manufacturing Processes 36:13, pages 1501-1512.
Read now
Read now
Botcha Appalanaidu & Akshay Dvivedi. (2021) On controlling of gas film shape in electrochemical discharge machining process for fabrication of elliptical holes. Materials and Manufacturing Processes 36:5, pages 558-571.
Read now
Read now
Farhan Ahmad Shamim, Akshay Dvivedi & Pradeep Kumar. (2021) On near-dry wire ECDM of Al6063/SiC/10p MMC. Materials and Manufacturing Processes 36:1, pages 122-134.
Read now
Read now
Ranjeet Singh Rathore & Akshay Dvivedi. (2020) Sonication of tool electrode for utilizing high discharge energy during ECDM. Materials and Manufacturing Processes 35:4, pages 415-429.
Read now
Read now
Nitesh Kumar, Niladri Mandal & A. K. Das. (2020) Micro-machining through electrochemical discharge processes: a review. Materials and Manufacturing Processes 35:4, pages 363-404.
Read now
Read now
Vineet Kumar Yadav, Pradeep Kumar & Akshay Dvivedi. (2019) Performance enhancement of rotary tool near-dry EDM of HSS by supplying oxygen gas in the dielectric medium. Materials and Manufacturing Processes 34:16, pages 1832-1846.
Read now
Read now
Vineet Kumar Yadav, Pradeep Kumar & Akshay Dvivedi. (2019) Effect of tool rotation in near-dry EDM process on machining characteristics of HSS. Materials and Manufacturing Processes 34:7, pages 779-790.
Read now
Read now
Sandeep Kumar & Akshay Dvivedi. (2019) On machining of hard and brittle materials using rotary tool micro-ultrasonic drilling process. Materials and Manufacturing Processes 34:7, pages 736-748.
Read now
Read now
Sandeep Kumar & Akshay Dvivedi. (2019) On effect of tool rotation on performance of rotary tool micro-ultrasonic machining. Materials and Manufacturing Processes 34:5, pages 475-486.
Read now
Read now
Navin Kumar Jha, Tarlochan Singh, Akshay Dvivedi & Shivanna Rajesha. (2019) Experimental investigations into triplex hybrid process of GA-RDECDM during subtractive processing of MMC’s. Materials and Manufacturing Processes 34:3, pages 243-255.
Read now
Read now
Tarlochan Singh & Akshay Dvivedi. (2018) On pressurized feeding approach for effective control on working gap in ECDM. Materials and Manufacturing Processes 33:4, pages 462-473.
Read now
Read now
S. Elhami & M. R. Razfar. (2018) Effect of ultrasonic vibration on the single discharge of electrochemical discharge machining. Materials and Manufacturing Processes 33:4, pages 444-451.
Read now
Read now
Anurag Shanu, Priyaranjan Sharma & Pradeep Dixit. Micromachining of alumina ceramic for microsystems applications: a systematic review, challenges and future opportunities. Materials and Manufacturing Processes 0:0, pages 1-33.
Read now
Read now
Articles from other publishers (55)
R. Saxena, A. Mandal, S. Chattopdhyay, Ankit D. Oza, Manoj Kumar & Kumar Ashutosh. (2022) Innovative study of electro chemical discharge drilling of silica based BK7 optical glass. International Journal on Interactive Design and Manufacturing (IJIDeM) 17:5, pages 2461-2471.
Crossref
Crossref
Santosh Kumar Yadav, Abhishek Singh, Kishore Debnath, Sahil Grover & Sarbjit Singh. (2023) Experimental investigation and comparative study between machining of CFRP composite and CNT-mixed CFRP composite using ECDM process. Journal of the Brazilian Society of Mechanical Sciences and Engineering 45:9.
Crossref
Crossref
Inderjeet Singh Sandhu, Saurabh Kumar Maurya & Alakesh Manna. (2023) Experimental investigation on ECDM parameters during µ-drilling of fabricated Zn/(Ag + Fe)-MMC for biodegradable application. Journal of the Brazilian Society of Mechanical Sciences and Engineering 45:8.
Crossref
Crossref
Akhilesh Kumar Tiwari & Sudhansu Sekhar Panda. (2023) Optimization of process parameters in ECDM machining using Taguchi based grey relation analysis. Measurement 216, pages 112971.
Crossref
Crossref
Botcha Appalanaidu, Ranjeet Singh Rathore, Manyala Anjani Raj & Akshay Dvivedi. (2023) Enhancement of Electrochemical Discharge Machining Process with Pressurized Tool Feeding Mechanism. Materials Today: Proceedings.
Crossref
Crossref
Pravin Pawar, Amaresh Kumar & Raj Ballav. 2023. Hybrid Micromachining and Microfabrication Technologies. Hybrid Micromachining and Microfabrication Technologies
17
100
.
Sourav P S, Shashank Singh & Anup Malik. (2023) A review on micro-drilling by electrochemical discharge machining. Engineering Research Express 5:2, pages 022004.
Crossref
Crossref
Shan Ali Nawaz, Peiyao Cao, Hao Tong & Yong Li. (2023) Micro ECDM scanning process with feedback control of flexible contact force. Journal of Manufacturing Processes 94, pages 266-277.
Crossref
Crossref
Linjing Yang, Chuanfei Yao, Yongjing Wu, Xuan Wang, Guochuan Ren, Chao Wang & Pingxue Li. (2023) Theoretical study on multi-range pulsewidth tuning in a dissipative soliton laser mode-locked by a Dirac semimetal. AIP Advances 13:4.
Crossref
Crossref
Mahaveer Prasad Sharma, Pankaj Kumar Gupta & Gaurav Kumar. (2022) Modeling and Simulation of Electrochemical Discharge Machining for Fabrication of Micro-Channel on Glass. Arabian Journal for Science and Engineering 48:3, pages 2701-2713.
Crossref
Crossref
Manpreet Singh, Parvesh Antil, Sarbjit Singh, Nitish Katal, Dapinder Kaur Bakshi & Alkesh. (2022) RA-ECDM of Silicon Wafers Using Taguchi’s Methodology and Machine Learning Algorithms. Silicon 15:3, pages 1511-1526.
Crossref
Crossref
Gaurav Yadav, Riya Choudhary, Himanshu Bhardwaj & B. K. Bhuyan. 2023. Recent Advances in Intelligent Manufacturing. Recent Advances in Intelligent Manufacturing
199
217
.
K. V. J. Bhargav, P. Shanthan, P. S. Balaji & Ranjeet Kumar Sahu. 2023. Advanced Engineering Optimization Through Intelligent Techniques. Advanced Engineering Optimization Through Intelligent Techniques
75
86
.
Mahaveer Prasad Sharma, Pankaj Kumar Gupta & Gaurav Kumar. 2023. Emerging Trends in Mechanical and Industrial Engineering. Emerging Trends in Mechanical and Industrial Engineering
553
570
.
Yajush Walia & Sarbjit Singh. 2023. Advances in Modelling and Optimization of Manufacturing and Industrial Systems. Advances in Modelling and Optimization of Manufacturing and Industrial Systems
109
124
.
Dheeraj Soni, B. D. Gidwani & R. Shringi. 2023. Advances in Manufacturing Engineering. Advances in Manufacturing Engineering
41
53
.
R. Saxena, A. Mandal, S. Chattopdhya, Ankit D. Oza, Abhishek Kumar & R. Ramesh. (2022) Experimental investigation of electrochemical discharge drilling (ECDM-D) performance characteristics for N-BK7 glass material. International Journal on Interactive Design and Manufacturing (IJIDeM).
Crossref
Crossref
Arsalan Torabi & Mohammad Reza Razfar. (2022) Investigating the effects of electrochemical discharge machining (ECDM) on the dimensional accuracy and surface integrity of the PDMS microchannel. SN Applied Sciences 4:10.
Crossref
Crossref
Santosh Kumar Yadav, Abhishek Singh & Kishore Debnath. (2022) Investigation of machining characteristics during micro-hole fabrication in CFRP composite by ECDM process. Engineering Research Express 4:3, pages 035055.
Crossref
Crossref
R Durga Prasad Reddy, Anshuman Kumar Sahu & Siba Sankar Mahapatra. (2022) Investigation on performance of a copper coated hollow rapid electrode during electrical discharge machining. Sādhanā 47:3.
Crossref
Crossref
B. Mallick, B. R. Sarkar, B. Doloi & B. Bhattacharyya. (2022) Improvement of Surface Quality and Machining Depth of μ-ECDM Performances Using Mixed Electrolyte at Different Polarity. Silicon 14:13, pages 8223-8232.
Crossref
Crossref
Vijay Manoharan & Sekar Tamilperuvalathan. (2022)
Prediction on enhanced electrochemical discharge machining behaviors of zirconia‐silicon nitride using hybrid
DNN
based spotted hyena optimization
. International Journal of Energy Research 46:7, pages 9221-9241.
Crossref
Crossref
Nikhil Jain & Jinesh Kumar Jain. (2022) Implementation of tool and electrolyte-based development in the ultrasonic-assisted ECDM process: a review. Journal of the Brazilian Society of Mechanical Sciences and Engineering 44:6.
Crossref
Crossref
Aniket D. Mohitkar, Nav Rattan & Rahul S. Mulik. (2021) Improvement in Machining Performances of SiC Workpiece Using TW-Electro Chemical Spark Machining. Silicon 14:4, pages 1369-1379.
Crossref
Crossref
Pankaj Kumar Gupta, Tapas Bajpai, Nikhil Jain & Dharmendra Singh. 2022. Proceedings of the International Conference on Industrial and Manufacturing Systems (CIMS-2020). Proceedings of the International Conference on Industrial and Manufacturing Systems (CIMS-2020)
259
269
.
Viveksheel Rajput, Mudimallana Goud & Narendra Mohan Suri. (2021) Review on Recent Advances, Research Trends, and Gas Film in Electrochemical Discharge-Based Micromachining. Journal of Micro and Nano-Manufacturing 9:1.
Crossref
Crossref
Viveksheel Rajput, Mudimallana Goud & Narendra Mohan Suri. (2020) Finite Element Modeling for Comparing the Machining Performance of Different Electrolytes in ECDM. Arabian Journal for Science and Engineering 46:3, pages 2097-2119.
Crossref
Crossref
Umesh Kumar, Manpreet Singh & Sarbjit Singh. (2020) Wire-Electrochemical Discharge Machining of SiC Reinforced Z-Pinned Polymer Matrix Composite Using Grey Relational Analysis. Silicon 13:3, pages 777-786.
Crossref
Crossref
Viveksheel Rajput, Mudimallana Goud & Narendra Mohan Suri. (2021) Review—Electrochemical Discharge Machining: Gas Film Electrochemical Aspects, Stability Parameters, and Research Work. Journal of The Electrochemical Society 168:1, pages 013503.
Crossref
Crossref
Shivangi Paliwal, P. Sudhakar Rao & K.K. Mittal. (2021) Study of electrochemical discharge machining of glass. Materials Today: Proceedings 37, pages 1828-1833.
Crossref
Crossref
Nitesh Kumar, Niladri Mandal & Alok Kumar Das. 2021. Micro Electro-Fabrication. Micro Electro-Fabrication
277
315
.
Manpreet Singh, Sarbjit Singh & Sanjeev Kumar. (2020) Investigating the impact of LASER assistance on the accuracy of micro-holes generated in carbon fiber reinforced polymer composite by electrochemical discharge machining. Journal of Manufacturing Processes 60, pages 586-595.
Crossref
Crossref
Jingyang Zhang, Zhengyang Xu & Chenxiang Zhang. (2020) Variable-parameter high-precision electrochemical discharge drilling method for 440C-Nb without recast layer. The International Journal of Advanced Manufacturing Technology 110:9-10, pages 2815-2826.
Crossref
Crossref
Bijan Mallick, Sumit Biswas, Biplab Ranjan Sarkar, Biswanath Doloi & Bijoy Bhattacharyya. (2020) On Performance of Electrochemical Discharge Micro-Machining Process Using Different Electrolytes and Tool Shapes. International Journal of Manufacturing, Materials, and Mechanical Engineering 10:2, pages 49-63.
Crossref
Crossref
Tarlochan Singh & Akshay Dvivedi. (2020) On prolongation of discharge regime during ECDM by titrated flow of electrolyte. The International Journal of Advanced Manufacturing Technology 107:3-4, pages 1819-1834.
Crossref
Crossref
Vijaya Vani Vemula & Sanjay Kumar Chak. (2020) Effect of loose abrasive mixed electrolyte on the aspect ratio of blind holes drilled in soda-lime glass by ECDM process. Manufacturing Review 7, pages 37.
Crossref
Crossref
Julfekar Arab, Dileep Kumar Mishra & Pradeep Dixit. (2020) Role of tool-substrate gap in the micro-holes formation by electrochemical discharge machining. Procedia Manufacturing 48, pages 492-497.
Crossref
Crossref
Zhixiang Zou, Jiangwen Liu, Yingjie Xiao, Yu Deng & Zhongning Guo. (2020) Study on the influence of dynamic characteristics of bubbles on electrochemical discharge machining conductive materials. Procedia CIRP 95, pages 678-682.
Crossref
Crossref
Tarlochan Singh, Ranjeet Singh Rathore & Akshay Dvivedi. (2020) Experimental investigations, empirical modeling and multi objective optimization of performance characteristics for ECDD with pressurized feeding method. Measurement 149, pages 107017.
Crossref
Crossref
Rajendra Kumar Arya & Akshay Dvivedi. 2020. Advances in Unconventional Machining and Composites. Advances in Unconventional Machining and Composites
313
323
.
Tarlochan Singh & Akshay Dvivedi. 2020. Manufacturing Engineering. Manufacturing Engineering
415
430
.
Liang Huang, Yan Cao, Feng Jia & Yan Lei. (2019) Micro Array Hole Formation in Glass Using Electrochemical Discharge Machining. International Journal of Electrochemical Science 14:10, pages 9490-9503.
Crossref
Crossref
Maneetkumar R. Dhanvijay, Vinay A. Kulkarni & Akshay Doke. (2019) Experimental Investigation and Analysis of Electrochemical Discharge Machining (ECDM) On Fiberglass Reinforced Plastic (FRP). Journal of The Institution of Engineers (India): Series C 100:5, pages 763-769.
Crossref
Crossref
Tarlochan Singh, Akshay Dvivedi & Rajendra Kumar Arya. (2019) Fabrication of micro-slits using W-ECDM process with textured wire surface: An experimental investigation on kerf overcut reduction and straightness improvement. Precision Engineering 59, pages 211-223.
Crossref
Crossref
P K Gupta & K Debnath. (2019) Electrochemical discharge machining of glass fiber-reinforced epoxy composites: a challenging approach. Journal of Physics: Conference Series 1240:1, pages 012044.
Crossref
Crossref
Manpreet Singh & Sarbjit Singh. (2018) Electrochemical discharge machining: A review on preceding and perspective research. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 233:5, pages 1425-1449.
Crossref
Crossref
Rajendra Kumar Arya & Akshay Dvivedi. (2019) Investigations on quantification and replenishment of vaporized electrolyte during deep micro-holes drilling using pressurized flow-ECDM process. Journal of Materials Processing Technology 266, pages 217-229.
Crossref
Crossref
Kapil Pawariya, Akshay Dvivedi & Tarlochan Singh. (2019) On performance enhancement of electrochemical discharge trepanning (ECDT) process by sonication of tool electrode. Precision Engineering 56, pages 8-19.
Crossref
Crossref
Julfekar Arab, Pratik Adhale, Dileep Kumar Mishra & Pradeep Dixit. (2019) Micro array hole formation in glass using electrochemical discharge machining. Procedia Manufacturing 34, pages 349-354.
Crossref
Crossref
Tarlochan Singh & Akshay Dvivedi. 2019. Advances in Micro and Nano Manufacturing and Surface Engineering. Advances in Micro and Nano Manufacturing and Surface Engineering
269
277
.
Ramver, Akshay Dvivedi & Pradeep Kumar. 2019. TMS 2019 148th Annual Meeting & Exhibition Supplemental Proceedings. TMS 2019 148th Annual Meeting & Exhibition Supplemental Proceedings
745
753
.
Tarlochan Singh & Akshay Dvivedi. (2018) On performance evaluation of textured tools during micro-channeling with ECDM. Journal of Manufacturing Processes 32, pages 699-713.
Crossref
Crossref
Pankaj Kumar Gupta. (2018) Effect of Electrolyte Level during Electro Chemical Discharge Machining of Glass. Journal of The Electrochemical Society 165:7, pages E279-E281.
Crossref
Crossref
Min-Seop Han, Ki Woon Chae & Byung-Kwon Min. (2017) Fabrication of high-aspect-ratio microgrooves using an electrochemical discharge micromilling process. Journal of Micromechanics and Microengineering 27:5, pages 055004.
Crossref
Crossref
Pankaj Kumar Gupta, Jai Prakash Bhamu, Chandra Shekhar Rajoria, Nitin Kumar Lautre & Vishnu Agarwal. (2016) Effect of Duty Ratio at Different Pulse Frequency during Hole Drilling in Ceramics Using Electrochemical Discharge Machining. MATEC Web of Conferences 77, pages 10004.
Crossref
Crossref