Citations (40)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (6)
John Kechagias, D. Chaidas, N. Vidakis, K. Salonitis & N.M. Vaxevanidis. (2022) Key parameters controlling surface quality and dimensional accuracy: a critical review of FFF process. Materials and Manufacturing Processes 37:9, pages 963-984.
Read now
Read now
Muhammad Harris, Johan Potgieter, Sudip Ray, Richard Archer & Khalid Mahmood Arif. (2020) Preparation and characterization of thermally stable ABS/HDPE blend for fused filament fabrication. Materials and Manufacturing Processes 35:2, pages 230-240.
Read now
Read now
N. Jayanth, P. Senthil & C. Prakash. (2018) Effect of chemical treatment on tensile strength and surface roughness of 3D-printed ABS using the FDM process. Virtual and Physical Prototyping 13:3, pages 155-163.
Read now
Read now
Xunfei Zhou, Sheng-Jen Hsieh & Chen-Ching Ting. (2018) Modelling and estimation of tensile behaviour of polylactic acid parts manufactured by fused deposition modelling using finite element analysis and knowledge-based library. Virtual and Physical Prototyping 13:3, pages 177-190.
Read now
Read now
Hira Zaheer & Millie Pant. (2017) Solution to industrial optimization problems through differential evolution variants. Materials and Manufacturing Processes 32:10, pages 1131-1143.
Read now
Read now
N. Mohan, P. Senthil, S. Vinodh & N. Jayanth. (2017) A review on composite materials and process parameters optimisation for the fused deposition modelling process. Virtual and Physical Prototyping 12:1, pages 47-59.
Read now
Read now
Articles from other publishers (34)
Constantine David, Dimitrios Sagris, Markos Petousis, Nektarios K. Nasikas, Amalia Moutsopoulou, Evangelos Sfakiotakis, Nikolaos Mountakis, Chrysa Charou & Nectarios Vidakis. (2023) Operational Performance and Energy Efficiency of MEX 3D Printing with Polyamide 6 (PA6): Multi-Objective Optimization of Seven Control Settings Supported by L27 Robust Design. Applied Sciences 13:15, pages 8819.
Crossref
Crossref
Xiaochen Sun, Maciej Mazur & Chi-Tsun Cheng. (2023) A review of void reduction strategies in material extrusion-based additive manufacturing. Additive Manufacturing 67, pages 103463.
Crossref
Crossref
H.S. Bharath, Balu Patil & Mrityunjay Doddamani. 2023. Lightweight and Sustainable Composite Materials. Lightweight and Sustainable Composite Materials
97
116
.
Nandishwar Verma, Pratiksha Awasthi, Akash Gupta & Shib Shankar Banerjee. (2022) Fused Deposition Modeling of Polyolefins: Challenges and Opportunities. Macromolecular Materials and Engineering 308:1.
Crossref
Crossref
M. N. V. R. L. Kumar & R. Ramakrishnan. (2022) Optimization of Fused Deposition Modeling Process Parameters and Dynamic Mechanical Analysis of 3D Printed Polycarbonate/Acrylonitrile-Butadiene-Styrene Composite Loaded with Tetrabromobiphenol-A and Microcrystalline Cellulose. Journal of Materials Engineering and Performance 31:12, pages 10071-10080.
Crossref
Crossref
Sajjad Farashi & Fariborz Vafaee. (2022) Effect of printing parameters on the tensile strength of FDM 3D samples: a meta-analysis focusing on layer thickness and sample orientation. Progress in Additive Manufacturing 7:4, pages 565-582.
Crossref
Crossref
Mohammadali Shirinbayan, Khaled Benfriha & Abbas Tcharkhtchi. (2022) Geometric Accuracy and Mechanical Behavior of PA6 Composite Curved Tubes Fabricated by Fused Filament Fabrication (FFF). Advanced Engineering Materials 24:7, pages 2101056.
Crossref
Crossref
M. Parker, A. Inthavong, E. Law, S. Waddell, N. Ezeokeke, R. Matsuzaki & D. Arola. (2022) 3D printing of continuous carbon fiber reinforced polyphenylene sulfide: Exploring printability and importance of fiber volume fraction. Additive Manufacturing 54, pages 102763.
Crossref
Crossref
Mohd Nazri Ahmad, Mohamad Ridzwan Ishak, Mastura Mohammad Taha, Faizal Mustapha, Zulkiflle Leman, Debby Dyne Anak Lukista, Irianto & Ihwan Ghazali. (2022) Application of Taguchi Method to Optimize the Parameter of Fused Deposition Modeling (FDM) Using Oil Palm Fiber Reinforced Thermoplastic Composites. Polymers 14:11, pages 2140.
Crossref
Crossref
Jumpei Kajimoto, Jun Koyanagi, Yusuke Maruyama, Hideyuki Kajita & Ryosuke Matsuzaki. (2022) Automated interlaminar reinforcement with thickness directional fiber arrangement for 3D printing. Composite Structures 286, pages 115321.
Crossref
Crossref
Lovin K John, Ramu Murugan & Sarat Singamneni. (2021) Impact of quasi-isotropic raster layup on the mechanical behaviour of fused filament fabrication parts. High Performance Polymers 34:1, pages 77-86.
Crossref
Crossref
Ramu Murugan, T. Mohanraj & Lovin K. John. 2022. Handbook of Smart Materials, Technologies, and Devices. Handbook of Smart Materials, Technologies, and Devices
321
348
.
Praveen Jeyachandran, Srikanth Bontha, Subhadip Bodhak, Vamsi Krishna Balla & Mrityunjay Doddamani. (2021) Material extrusion additive manufacturing of bioactive glass/high density polyethylene composites. Composites Science and Technology, pages 108966.
Crossref
Crossref
Iván Rivet, Narges Dialami, Miguel Cervera, Michele Chiumenti, Guillermo Reyes & Marco A. Pérez. (2021) Experimental, Computational, and Dimensional Analysis of the Mechanical Performance of Fused Filament Fabrication Parts. Polymers 13:11, pages 1766.
Crossref
Crossref
Francesca Cosmi & Alberto Dal Maso. (2019) Validation of an in-house-designed tensile testing machine for the mechanical characterization of 3D-printed specimens. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 235:10, pages 1840-1850.
Crossref
Crossref
Ashraf Mahmud Rayed, Balasubramanian Esakki, Arunkumar Ponnambalam, Sajal Chandra Banik & Karim Aly. (2021) Optimization of UAV structure and evaluation of vibrational and fatigue characteristics through simulation studies. International Journal for Simulation and Multidisciplinary Design Optimization 12, pages 17.
Crossref
Crossref
Madheswaran Subramaniyan, Sivakumar Karuppan, Prakash Eswaran, Anandhamoorthy Appusamy & A. Naveen Shankar. (2021) State of art on fusion deposition modeling machines process parameter optimization on composite materials. Materials Today: Proceedings 45, pages 820-827.
Crossref
Crossref
Soham Teraiya, Swapnil Vyavahare & Shailendra Kumar. 2021. Advances in Manufacturing Processes. Advances in Manufacturing Processes
283
293
.
Ramu Murugan, T. Mohanraj & Lovin K. John. 2020. Handbook of Smart Materials, Technologies, and Devices. Handbook of Smart Materials, Technologies, and Devices
1
28
.
Dileep Bonthu, H.S. Bharath, Suhasini Gururaja, Pavana Prabhakar & Mrityunjay Doddamani. (2020) 3D printing of syntactic foam cored sandwich composite. Composites Part C: Open Access 3, pages 100068.
Crossref
Crossref
Tarun Sai, Vimal Kumar Pathak & Ashish Kumar Srivastava. (2020) Modeling and optimization of fused deposition modeling (FDM) process through printing PLA implants using adaptive neuro-fuzzy inference system (ANFIS) model and whale optimization algorithm. Journal of the Brazilian Society of Mechanical Sciences and Engineering 42:12.
Crossref
Crossref
Bharath H S, Dileep Bonthu, Pavana Prabhakar & Mrityunjay Doddamani. (2020) Three-Dimensional Printed Lightweight Composite Foams. ACS Omega 5:35, pages 22536-22550.
Crossref
Crossref
Praveen Jeyachandran, Srikanth Bontha, Subhadip Bodhak, Vamsi Krishna Balla, Biswanath Kundu & Mrityunjay Doddamani. (2020) Mechanical behaviour of additively manufactured bioactive glass/high density polyethylene composites. Journal of the Mechanical Behavior of Biomedical Materials 108, pages 103830.
Crossref
Crossref
Sachini Wickramasinghe, Truong Do & Phuong Tran. (2020) FDM-Based 3D Printing of Polymer and Associated Composite: A Review on Mechanical Properties, Defects and Treatments. Polymers 12:7, pages 1529.
Crossref
Crossref
Sunpreet Singh, Gurminder Singh, Chander Prakash & Seeram Ramakrishna. (2020) Current status and future directions of fused filament fabrication. Journal of Manufacturing Processes 55, pages 288-306.
Crossref
Crossref
Penumuru Kumar, Arumugam Mahamani & B. Durga Prasad. (2020) Additive Manufacturing - A Literature Review. Materials Science Forum 979, pages 74-83.
Crossref
Crossref
Swapnil Vyavahare, Soham Teraiya, Deepak Panghal & Shailendra Kumar. (2020) Fused deposition modelling: a review. Rapid Prototyping Journal 26:1, pages 176-201.
Crossref
Crossref
Shilpesh R. Rajpurohit & Harshit K. Dave. (2018) Analysis of tensile strength of a fused filament fabricated PLA part using an open-source 3D printer. The International Journal of Advanced Manufacturing Technology 101:5-8, pages 1525-1536.
Crossref
Crossref
Kazem Fayazbakhsh, Mobina Movahedi & Jordan Kalman. (2019) The impact of defects on tensile properties of 3D printed parts manufactured by fused filament fabrication. Materials Today Communications 18, pages 140-148.
Crossref
Crossref
Baltej Singh Rupal, Khaled G. Mostafa, Yeping Wang & Ahmed Jawad Qureshi. (2019) A Reverse CAD Approach for Estimating Geometric and Mechanical Behavior of FDM Printed Parts. Procedia Manufacturing 34, pages 535-544.
Crossref
Crossref
Shilpesh R. Rajpurohit & Harshit K. Dave. (2018) Flexural strength of fused filament fabricated (FFF) PLA parts on an open-source 3D printer. Advances in Manufacturing 6:4, pages 430-441.
Crossref
Crossref
Matthew A. Ryder, Diana A. Lados, Germano S. Iannacchione & Amy M. Peterson. (2018) Fabrication and properties of novel polymer-metal composites using fused deposition modeling. Composites Science and Technology 158, pages 43-50.
Crossref
Crossref
Helge Klippstein, Alejandro Diaz De Cerio Sanchez, Hany Hassanin, Yahya Zweiri & Lakmal Seneviratne. (2018) Fused Deposition Modeling for Unmanned Aerial Vehicles (UAVs): A Review. Advanced Engineering Materials 20:2, pages 1700552.
Crossref
Crossref
Gokulakrishnan Jothibabu & Saravana Kumar Gurunathan. (2018) Surrogate Based Sensitivity Analysis of Part Strength due to Process Parameters in Fused Deposition Modelling. Procedia Computer Science 133, pages 772-778.
Crossref
Crossref