Citations (46)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (9)
John Kechagias, D. Chaidas, N. Vidakis, K. Salonitis & N.M. Vaxevanidis. (2022) Key parameters controlling surface quality and dimensional accuracy: a critical review of FFF process. Materials and Manufacturing Processes 37:9, pages 963-984.
Read now
Read now
Rupinder Singh, Ranvijay Kumar, Mohit Singh & Pawan Preet. (2022) On flexural, wear and morphological properties of 3D printed almond skin powder reinforced PLA matrix. Advances in Materials and Processing Technologies 8:3, pages 3514-3538.
Read now
Read now
M. Bodaghi, M. Mobin, D. Ban, S. V. Lomov & M. Nikzad. (2022) Surface quality of printed porous materials for permeability rig calibration. Materials and Manufacturing Processes 37:5, pages 548-558.
Read now
Read now
Venkata Pavan M, Balamurugan K & Latchoumi T.P. (2022) PLA-Cu reinforced composite filament: preparation and flexural property printed at different machining conditions. Advanced Composite Materials 31:1, pages 102-117.
Read now
Read now
Mariangela Quarto, Mattia Carminati & Gianluca D’Urso. (2021) Density and shrinkage evaluation of AISI 316L parts printed via FDM process. Materials and Manufacturing Processes 36:13, pages 1535-1543.
Read now
Read now
Nastaran Mosleh, Amir M. Rezadoust & Soheil Dariushi. (2021) Determining process-window for manufacturing of continuous carbon fiber-reinforced composite Using 3D-printing. Materials and Manufacturing Processes 36:4, pages 409-418.
Read now
Read now
Vishal Francis & Prashant K. Jain. (2018) Investigation on the effect of surface modification of 3D printed parts by nanoclay and dimethyl ketone. Materials and Manufacturing Processes 33:10, pages 1080-1092.
Read now
Read now
Milad Areir, Yanmeng Xu, David Harrison, John Fyson & Ruirong Zhang. (2018) Development of 3D printing technology for the manufacture of flexible electric double-layer capacitors. Materials and Manufacturing Processes 33:8, pages 905-911.
Read now
Read now
N. Mohan, P. Senthil, S. Vinodh & N. Jayanth. (2017) A review on composite materials and process parameters optimisation for the fused deposition modelling process. Virtual and Physical Prototyping 12:1, pages 47-59.
Read now
Read now
Articles from other publishers (37)
Ilaria Papa, Antonio Langella, Francesco Napolitano & Pietro Russo. (2023) Comparison of FDMed and compression molded biocomposites in polylactic acid and food flour waste. Journal of Composite Materials 57:29, pages 4521-4533.
Crossref
Crossref
Asma Boumedine, Samir Lecheb, Khaled Benfriha & Pascal Omnes. (2023) Investigating the effect of process parameters for fused filament fabrication. Progress in Additive Manufacturing 8:6, pages 1147-1160.
Crossref
Crossref
Faheem Faroze, Vineet Srivastava & Ajay Batish. (2023)
Enhancing mechanical properties of polycarbonate parts developed by fused filament fabrication using
RSM‐TOPSIS
hybrid approach
. Polymer Engineering & Science 63:12, pages 4186-4206.
Crossref
Crossref
Lu Liu, Eonyeon Jo, Dylan Hoskins, Uday Vaidya, Soydan Ozcan, Feng Ju & Seokpum Kim. (2023) Layer time optimization in large scale additive manufacturing via a reduced physics-based model. Additive Manufacturing 72, pages 103597.
Crossref
Crossref
Nidhi Dixit & Prashant K. Jain. (2023) Properties evaluation of chemically treated TPU parts printed through FFF. The International Journal of Advanced Manufacturing Technology 126:1-2, pages 131-143.
Crossref
Crossref
Saty Dev & Rajeev Srivastava. (2022) Influence of process variables on mechanical properties and material weight of acrylic butadiene styrene parts produced by fused filament fabrication. Progress in Additive Manufacturing 8:2, pages 143-158.
Crossref
Crossref
Albert E. Patterson, Charul Chadha, Iwona M. Jasiuk & James T. Allison. (2023) Tensile behavior of individual fibers and films made via material extrusion additive manufacturing. Next Materials 1:1, pages 100002.
Crossref
Crossref
Geoffrey Ginoux, Joseph Paux & Samir Allaoui. (2023) New preparation method of microstructurally and mechanically standardized PETG specimens by material extrusion additive manufacturing and machining. Additive Manufacturing 66, pages 103471.
Crossref
Crossref
N. Dhanunjayarao Borra & Venkata Swamy Naidu Neigapula. (2022) Parametric optimization for dimensional correctness of 3D printed part using masked stereolithography: Taguchi method. Rapid Prototyping Journal 29:1, pages 166-184.
Crossref
Crossref
Dibakar Mondal, Sanaz S. Hashemi, Elizabeth Diederichs, Haresh Patil & Thomas L. Willett. 2023. Additive Manufacturing of Biopolymers. Additive Manufacturing of Biopolymers
135
166
.
Roberto Scaffaro, Maria Clara Citarrella, Anna Catania & Luca Settanni. (2022) Green composites based on biodegradable polymers and anchovy (Engraulis Encrasicolus) waste suitable for 3D printing applications. Composites Science and Technology 230, pages 109768.
Crossref
Crossref
Arianna Grivet‐Brancot, Monica Boffito & Gianluca Ciardelli. (2022) Use of Polyesters in Fused Deposition Modeling for Biomedical Applications. Macromolecular Bioscience 22:10, pages 2200039.
Crossref
Crossref
E. Abdeddine, A. Majid, Z. Beidouri & Kh. Zarbane. (2022) Experimental investigation for non-linear vibrations of free supported and cantilever FFF rectangular plates. Archives of Materials Science and Engineering 116:2, pages 49-56.
Crossref
Crossref
Roberto Scaffaro, Maria Clara Citarrella & Emmanuel Fortunato Gulino. (2022) Opuntia Ficus Indica based green composites for NPK fertilizer controlled release produced by compression molding and fused deposition modeling. Composites Part A: Applied Science and Manufacturing 159, pages 107030.
Crossref
Crossref
Mohammadali Shirinbayan, Khaled Benfriha & Abbas Tcharkhtchi. (2022) Geometric Accuracy and Mechanical Behavior of PA6 Composite Curved Tubes Fabricated by Fused Filament Fabrication (FFF). Advanced Engineering Materials 24:7, pages 2101056.
Crossref
Crossref
Wenzheng Wu, Haiming Wang, Jiaqi Wang, Qingping Liu, Zheng Zhang, Ke Li, Yuhan Gong, Ji Zhao, Luquan Ren & Guiwei Li. (2022) Hybrid Additive Manufacturing of Fused Filament Fabrication and Ultrasonic Consolidation. Polymers 14:12, pages 2385.
Crossref
Crossref
Katarzyna Bulanda, Mariusz Oleksy & Rafał Oliwa. (2022) Polymer Composites Based on Glycol-Modified Poly(Ethylene Terephthalate) Applied to Additive Manufacturing Using Melted and Extruded Manufacturing Technology. Polymers 14:8, pages 1605.
Crossref
Crossref
Reddy V. Chengal, S. Kavitha, T. Nishkala & Basha S. M. Jameel. (2022) Multi objective optimization of 3D printing process using multi-attribute decision making methods. i-manager's Journal on Mechanical Engineering 12:2, pages 40.
Crossref
Crossref
Hai Dong, Xiuxiu Gao & Mingqi Wei. (2021) Quality Prediction of Fused Deposition Molding Parts Based on Improved Deep Belief Network. Computational Intelligence and Neuroscience 2021, pages 1-14.
Crossref
Crossref
M. Venkata Pavan, K. Balamurugan, V. Srinivasadesikan & Shyi-Long Lee. (2021) Impact and Shear Behavior of PLA/12%Cu Reinforced Composite Filament Printed at Different FDM Conditions. Arabian Journal for Science and Engineering 46:12, pages 12709-12720.
Crossref
Crossref
Valeria Figueroa-Velarde, Tania Diaz-Vidal, Erick Omar Cisneros-López, Jorge Ramón Robledo-Ortiz, Edgar J. López-Naranjo, Pedro Ortega-Gudiño & Luis Carlos Rosales-Rivera. (2021) Mechanical and Physicochemical Properties of 3D-Printed Agave Fibers/Poly(lactic) Acid Biocomposites. Materials 14:11, pages 3111.
Crossref
Crossref
Shijie Jiang, Mingyu Sun, Yang Zhan, Hui Li & Wei Sun. (2021) A dynamic model of laminated material extrusion additive manufacturing plate with the property of orthogonal anisotropy. Rapid Prototyping Journal 27:4, pages 785-796.
Crossref
Crossref
Raj Mohan R, Venkatraman R & Raghuraman S. (2021) Experimental analysis on density, micro-hardness, surface roughness and processing time of Acrylonitrile Butadiene Styrene (ABS) through Fused Deposition Modeling (FDM) using Box Behnken Design (BBD). Materials Today Communications 27, pages 102353.
Crossref
Crossref
Albert E. Patterson, Charul Chadha & Iwona M. Jasiuk. (2021) Identification and Mapping of Manufacturability Constraints for Extrusion-Based Additive Manufacturing. Journal of Manufacturing and Materials Processing 5:2, pages 33.
Crossref
Crossref
Paulo Henrique Machado Cardoso, Rafaella Rabello Teixeira Perdone Coutinho, Flávia Rocha Drummond, Marceli do Nascimento da Conceição & Rossana Mara da Silva Moreira Thiré. (2020) Evaluation of Printing Parameters on Porosity and Mechanical Properties of 3D Printed PLA/PBAT Blend Parts. Macromolecular Symposia 394:1, pages 2000157.
Crossref
Crossref
Flaviana Calignano, Massimo Lorusso, Ignanio Roppolo & Paolo Minetola. (2020) Investigation of the Mechanical Properties of a Carbon Fibre-Reinforced Nylon Filament for 3D Printing. Machines 8:3, pages 52.
Crossref
Crossref
Penumuru Kumar, Arumugam Mahamani & B. Durga Prasad. (2020) Additive Manufacturing - A Literature Review. Materials Science Forum 979, pages 74-83.
Crossref
Crossref
Junior Nomani, Daniel Wilson, Mariana Paulino & Mazher Iqbal Mohammed. (2020) Effect of layer thickness and cross-section geometry on the tensile and compression properties of 3D printed ABS. Materials Today Communications 22, pages 100626.
Crossref
Crossref
Sunpreet Singh & Rupinder Singh. (2020) Mechanical characterization and comparison of additive manufactured ABS, Polyflex™ and ABS/Polyflex™ blended functional prototypes. Rapid Prototyping Journal 26:2, pages 225-237.
Crossref
Crossref
Shijie Jiang, Yinfang Shi, Yannick Siyajeu, Ming Zhan, Chunyu Zhao & Changyou Li. (2019) Effect of Processing Parameters on the Dynamic Characteristic of Material Extrusion Additive Manufacturing Plates. Applied Sciences 9:24, pages 5345.
Crossref
Crossref
Enrique Cuan-Urquizo, Eduardo Barocio, Viridiana Tejada-Ortigoza, R. Pipes, Ciro Rodriguez & Armando Roman-Flores. (2019) Characterization of the Mechanical Properties of FFF Structures and Materials: A Review on the Experimental, Computational and Theoretical Approaches. Materials 12:6, pages 895.
Crossref
Crossref
Bai Huang, Shuna Meng, Hui He, Yunchao Jia, Yingbin Xu & Huankun Huang. (2019) Study of processing parameters in fused deposition modeling based on mechanical properties of acrylonitrile-butadiene-styrene filament. Polymer Engineering & Science 59:1, pages 120-128.
Crossref
Crossref
Marc Rabionet, Emma Polonio, Antonio Guerra, Jessica Martin, Teresa Puig & Joaquim Ciurana. (2018) Design of a Scaffold Parameter Selection System with Additive Manufacturing for a Biomedical Cell Culture. Materials 11:8, pages 1427.
Crossref
Crossref
Elnaz Asadollahi-Yazdi, Julien Gardan & Pascal Lafon. (2018) Toward integrated design of additive manufacturing through a process development model and multi-objective optimization. The International Journal of Advanced Manufacturing Technology 96:9-12, pages 4145-4164.
Crossref
Crossref
Omar Ahmed Mohamed, Syed Hasan Masood & Jahar Lal Bhowmik. (2017) Experimental investigation of time-dependent mechanical properties of PC-ABS prototypes processed by FDM additive manufacturing process. Materials Letters 193, pages 58-62.
Crossref
Crossref
Sunpreet Singh & Rupinder Singh. (2016) Some investigations on surface roughness of aluminium metal composite primed by fused deposition modeling-assisted investment casting using reinforced filament. Journal of the Brazilian Society of Mechanical Sciences and Engineering 39:2, pages 471-479.
Crossref
Crossref
Salam Nori Kamoona, Syed Hasan Masood & Omar Ahmed Mohamed. An investigation on impact resistance of FDM processed Nylon-12 parts using response surface methodology. An investigation on impact resistance of FDM processed Nylon-12 parts using response surface methodology.