Citations (61)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (12)
N Muralidharan, K Chockalingam, K Kalaiselvan & N Nithyavathy. (2023) Investigation of ZrO2 reinforced aluminium metal matrix composites by liquid metallurgy route. Advances in Materials and Processing Technologies 9:2, pages 593-607.
Read now
Read now
K. N. Uday & G. Rajamurugan. (2023) Influence of process parameters and its effects on friction stir welding of dissimilar aluminium alloy and its composites – a review. Journal of Adhesion Science and Technology 37:5, pages 767-800.
Read now
Read now
Alok Ranjan, Harish Kumar, Leeladhar Nagdeve, Abhishek Mishra, Gajendra Kumar Gaurav & Jiří Jaromír Klemeš. (2022) Mechanical properties of rice husk ash, an environmental pollutant, based composites: A step towards sustainable hybrid composites. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects 44:4, pages 9584-9602.
Read now
Read now
Vineet Chak, Himadri Chattopadhyay & T L Dora. (2021) Application of solid processing routes for the synthesis of graphene-aluminum composites- a review. Materials and Manufacturing Processes 36:11, pages 1219-1235.
Read now
Read now
Tanvir Singh, S. K. Tiwari & D. K. Shukla. (2020) Effects of Al2O3 nanoparticles volume fractions on microstructural and mechanical characteristics of friction stir welded nanocomposites. Nanocomposites 6:2, pages 76-84.
Read now
Read now
S. Eaben Rajkumar, K. Palanikumar, K. Pitchandi & B. Latha. (2020) Subsurface integrity studies on the drilling of Al/B4C/mica hybrid metal matrix composites. Materials and Manufacturing Processes 35:1, pages 52-60.
Read now
Read now
Padmakumar A. Bajakke, Vinayak R. Malik & Anand S. Deshpande. (2019) Particulate metal matrix composites and their fabrication via friction stir processing – a review. Materials and Manufacturing Processes 34:8, pages 833-881.
Read now
Read now
V. K. Parikh, A. D. Badgujar & N. D. Ghetiya. (2019) Joining of metal matrix composites using friction stir welding: a review. Materials and Manufacturing Processes 34:2, pages 123-146.
Read now
Read now
A. Gnanavelbabu, Kaliyamoorthy Rajkumar & P. Saravanan. (2018) Investigation on the cutting quality characteristics of abrasive water jet machining of AA6061-B4C-hBN hybrid metal matrix composites. Materials and Manufacturing Processes 33:12, pages 1313-1323.
Read now
Read now
Jigar Suthar & K. M. Patel. (2018) Processing issues, machining, and applications of aluminum metal matrix composites. Materials and Manufacturing Processes 33:5, pages 499-527.
Read now
Read now
S. Thirumalai Kumaran, Tae Jo Ko, M. Uthayakumar, M. Adam Khan & Imran Muhammad. (2017) Some experimental investigations on drilling AA (6351)-SiC-B4C composite. Materials and Manufacturing Processes 32:13, pages 1557-1564.
Read now
Read now
M. Sankar, A. Gnanavelbabu, K. Rajkumar & N. A. Thushal. (2017) Electrolytic concentration effect on the abrasive assisted-electrochemical machining of an aluminum–boron carbide composite. Materials and Manufacturing Processes 32:6, pages 687-692.
Read now
Read now
Articles from other publishers (49)
Balakrishnan Siddharthan & Kumaravel Arumugam. (2023)
Identifying stir casting process parameters to maximize strength of LM13 with TiB
2
and ZrC hybrid metal matrix composite
. Materials Testing 0:0.
Crossref
Crossref
Shen Xu, Deng Dejie & Zhao Haidong. (2023) Effect of Surface Treatments on the Microstructure and Mechanical Properties of the A356/SiCp and A356 Compound Interface of Cylinder Liner Centrifugal Castings. International Journal of Metalcasting.
Crossref
Crossref
Mohammad Azad Alam, Hamdan B. Ya, Mohammad Azeem, Mazli Mustapha, Mohammad Yusuf, Faisal Masood, Roshan Vijay Marode, Salit Mohd Sapuan & Akhter Husain Ansari. (2023) Advancements in aluminum matrix composites reinforced with carbides and graphene: A comprehensive review. Nanotechnology Reviews 12:1.
Crossref
Crossref
Manoj Kumar Gupta, Nitesh Singh Rajput, Shweta Kulshreshtha, Brijesh Gangil, Vinay Kumar Patel, Jitendra Nath Mahto & Tarun Kumar Gupta. (2023) Fabrication and Investigation of Mechanical Behaviors of TiB2 Reinforced AMCs. Transactions of the Indian Institute of Metals.
Crossref
Crossref
Merugu Rakesh, Neeraj Srivastava, Shishira Bhagavath & Shyamprasad Karagadde. (2023) Role of In Situ Formed (Al3Zr + Al3Ti) Particles on Nucleation of Primary Phase in Al-5 wt.% Cu Alloy. Journal of Materials Engineering and Performance.
Crossref
Crossref
Manoj Kumar Gupta. (2023) Mechanical behaviors of Al 6063/TiB2 composites fabricated by stir casting process. Materials Today: Proceedings 82, pages 222-226.
Crossref
Crossref
Shoba Chintada, Siva Prasad Dora, Dorathi Kare & Srinivasa Rao Pujari. (2022) Powder Metallurgy versus Casting: Damping Behavior of Pure Aluminum. Journal of Materials Engineering and Performance 31:11, pages 9122-9128.
Crossref
Crossref
Masomeh Ghayebloo, Meisam Torab Mostaedi & Hamzeh Forati Rad. (2022) A Review of Recent Studies of Fabrication of Al–B4C Composite Sheets Used in Nuclear Metal Casks. Transactions of the Indian Institute of Metals 75:10, pages 2477-2490.
Crossref
Crossref
Tarun Kumar Kotteda, Manoj Kumar, Pramod Kumar & Rama Bhadri Raju Chekuri. (2022) Metal matrix nanocomposites: future scope in the fabrication and machining techniques. The International Journal of Advanced Manufacturing Technology.
Crossref
Crossref
Wenbo Guo, Qiyao Hu, Peng Xiao & Yunqi Deng. (2022) Effect of Ti element on the interfacial reactions and micro-structures of the Al-B4C composites fabricated by the stir-casting method. Applied Surface Science 584, pages 152619.
Crossref
Crossref
Shailendra Kumar Yadav, Chetan Swaroop, Ashish Das, Mukul Shukla & Tarun Bhardwaj. (2022) WITHDRAWN: Recent advances in aluminium metal matrix Composites: A critical review. Materials Today: Proceedings.
Crossref
Crossref
K. Nithesh, M.C. Gowrishankar, Rajesh Nayak & Sathyashankara Sharma. (2021) Effect of light weight reinforcement and heat treatment process parameters on morphological and wear aspects of hypoeutectic Al-Si based composites - a critical review. Journal of Materials Research and Technology 15, pages 4272-4292.
Crossref
Crossref
M.K. Kutzhanov, A.T. Matveev, D.G. Kvashnin, S. Corthay, A.G. Kvashnin, A.S. Konopatsky, A.V. Bondarev, N.A. Arkharova & D.V. Shtansky. (2021) Al/SiC nanocomposites with enhanced thermomechanical properties obtained from microwave plasma-treated nanopowders. Materials Science and Engineering: A 824, pages 141817.
Crossref
Crossref
Qiyao Hu, Wenbo Guo, Peng Xiao & Haidong Zhao. (2021) Effects of Fast Shot Speed and Wall Thickness on the Microstructures and Mechanical Properties of the High Pressure Die-casting 6061-SiC Composites. Metallurgical and Materials Transactions B 52:4, pages 2283-2293.
Crossref
Crossref
Qiyao Hu, Wenbo Guo & Haidong Zhao. (2021) Influence of wall thickness and intensification pressure on the microstructures and mechanical properties of AlSi7-SiC composites fabricated by the vacuum-assisted HPDC process. Materials Science and Engineering: A 819, pages 141470.
Crossref
Crossref
Yong-fei Wang, Yi Guo, Sheng-dun Zhao & Xiao-guang Fan. (2021) Direct preparation of semi-solid billets by the semi-solid isothermal heat treatment for commercial cold-rolled ZL104 aluminum alloy. International Journal of Minerals, Metallurgy and Materials 28:7, pages 1164-1173.
Crossref
Crossref
Min Wu, Jian Liu, Yunzhong Liu, Xia Luo, Bin Wang & Canyi Du. (2021) Microstructure evolution and densification of sintered porous 2024 aluminum alloy compressed in a semi-solid state. Materials Research Express 8:6, pages 066503.
Crossref
Crossref
Pooja Maurya, Lakshmi Vaishnavi, Indrani Sen & Siddhartha Roy. (2021) A Critical Assessment of the Processing Parameters Yielding an Optimum Combination of Mechanical Properties in Cast Al-B4C Composites. Transactions of the Indian Institute of Metals 74:6, pages 1279-1294.
Crossref
Crossref
Shengpu Liu, Zhaoyao Zhou, Defu Li, Shengli Guo & Shi Shu. (2019) Effect of Pack Rolling and Heat Treatment on Microstructure and Mechanical Properties of B4CP/6061Al Composite Prepared by Powder Metallurgy. Metals and Materials International 27:6, pages 1819-1826.
Crossref
Crossref
José Grilo, Vítor Hugo Carneiro, José Carlos Teixeira & Hélder Puga. (2021) Manufacturing Methodology on Casting-Based Aluminium Matrix Composites: Systematic Review. Metals 11:3, pages 436.
Crossref
Crossref
Mohammad Mohsin Khan, Mohammad Irfan Hajam & Zahoor Ahmad Mir. (2021) Optimizing the Effect of Solid Lubricants on the Sliding Wear Behavior of SiCp Reinforced Cast Aluminum Alloy. Journal of Bio- and Tribo-Corrosion 7:1.
Crossref
Crossref
Priyanshu Kumar, Abhishek Kumar, Akash Kumar, Lavkush, Yatender Kumar & Shashi Prakash Dwivedi. (2021) Different reinforcement particles and their effects in the development of composite material by different development techniques: A review. Materials Today: Proceedings 47, pages 4015-4019.
Crossref
Crossref
Rohit Kumar, Sajal Pradeep, Rishabh Singh, Ritesh Dubey & Shashi Prakash Dwivedi. (2021) A critical review on different casting technique to develop the composite material and its tribo-mechanical behaviour. Materials Today: Proceedings 47, pages 3895-3900.
Crossref
Crossref
Ramaswamy Palanivel, Isaac Dinaharan & Rudolph F. Laubscher. 2021. Encyclopedia of Materials: Composites. Encyclopedia of Materials: Composites
559
587
.
Tanvir Singh, S. K. Tiwari & D. K. Shukla. 2021. Advances in Production and Industrial Engineering. Advances in Production and Industrial Engineering
219
228
.
Priyaranjan Samal, Pandu R. Vundavilli, Arabinda Meher & Manas M. Mahapatra. (2020) Recent progress in aluminum metal matrix composites: A review on processing, mechanical and wear properties. Journal of Manufacturing Processes 59, pages 131-152.
Crossref
Crossref
Mohammad Arab, Maboobeh Azadi & Omid mirzaee. (2020) Effects of manufacturing parameters on the corrosion behavior of Al–B4C nanocomposites. Materials Chemistry and Physics 253, pages 123259.
Crossref
Crossref
Yongfei Wang, Yi Guo & Shengdun Zhao. (2020) Effects of Process Parameters on the Microstructure and Hardness of Semi-Solid AlSi9Mg Aluminum Alloy Prepared by RAP Process. MATERIALS TRANSACTIONS 61:9, pages 1731-1739.
Crossref
Crossref
A. Raja Annamalai, Muthe Srikanth, A. Muthuchamy, Shashank Acharya, Anup Khisti, Dinesh K. Agrawal & Chun-Ping Jen. (2020) Spark Plasma Sintering and Characterization of Al-TiB2 Composites. Metals 10:9, pages 1110.
Crossref
Crossref
Peng Zhang, Weiyi Zhang, Yunhui Du & Yujie Wang. (2020) High-performance Al-1.5 wt% Si-Al2O3 composite by vortex-free high-speed stir casting. Journal of Manufacturing Processes 56, pages 1126-1135.
Crossref
Crossref
Gupta Manoj Kumar. (2020) Characterization of Al-6063/TiB2/Gr hybrid composite fabricated by stir casting process. Metal Powder Report.
Crossref
Crossref
Tanvir Singh, SK Tiwari & DK Shukla. (2019) Effect of nano-sized particles on grain structure and mechanical behavior of friction stir welded Al-nanocomposites. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 234:2, pages 274-290.
Crossref
Crossref
Jigar Suthar & Kaushik Patel. (2020) Effect of percentage reinforcement on mechanical and tribological properties of AHMMCs. Materials Today: Proceedings 32, pages 445-451.
Crossref
Crossref
Tanvir Singh, S.K. Tiwari & D.K. Shukla. (2020) Preparation of aluminium alloy-based nanocomposites via friction stir welding. Materials Today: Proceedings 27, pages 2562-2568.
Crossref
Crossref
Mohit Kumar Sahu & Raj Kumar Sahu. (2020) Synthesis, microstructure and hardness of Al 7075/B4C/Fly-ash composite using stir casting method. Materials Today: Proceedings 27, pages 2401-2406.
Crossref
Crossref
Tanvir Singh, S K Tiwari & D K Shukla. (2019)
Production of AA6061-T6/Al
2
O
3
reinforced nanocomposite using friction stir welding
. Engineering Research Express 1:2, pages 025052.
Crossref
Crossref
Tanvir Singh, S.K. Tiwari & D.K. Shukla. (2019) Friction-stir welding of AA6061-T6: The effects of Al2O3 nano-particles addition. Results in Materials 1, pages 100005.
Crossref
Crossref
R Soundararajan, S Sivasankaran, Fahad A Al-Mufadi, M Akilesh & P R Elango. (2019) Investigation on A356-20wt%SiC composites through mechanical stirring and ultra-sonic-assisted cavitation. Materials Research Express 6:9, pages 096572.
Crossref
Crossref
Arvind Kumar & Ram Naresh Rai. (2019) Evaluation of Wear Properties of Stir Cast AA7050 -10% B<sub>4</sub>C <i>Ex Situ</i> Composite through Fuzzy-TOPSIS MCDM Method. Solid State Phenomena 291, pages 1-12.
Crossref
Crossref
W.Y. Zhang, Y.H. Du & P. Zhang. (2019) Vortex-free stir casting of Al-1.5 wt% Si-SiC composite. Journal of Alloys and Compounds 787, pages 206-215.
Crossref
Crossref
Samson Jerold Samuel Chelladurai, Ramesh Arthanari, Rohith Selvarajan, Thirumal Prasanna Ravichandran, Saravana Kumar Ravi & Siva Rama Chandran Petchimuthu. (2018) Optimisation of Dry Sliding Wear Parameters of Squeeze Cast AA336 Aluminium Alloy: Copper-Coated Steel Wire-Reinforced Composites by Response Surface Methodology. International Journal of Metalcasting 13:2, pages 354-366.
Crossref
Crossref
Jigar Suthar & Kaushik Patel. (2018) Identification, screening and optimization of significant parameters for stir cast hybrid aluminium metal matrix composite. Heliyon 4:12, pages e00988.
Crossref
Crossref
Reza Mohammadi Badizi, Mohsen Askari-Paykani, Amir Parizad & Hamid Reza Shahverdi. (2017) Effects of Electromagnetic Frequency and SiC Nanoparticles on the Microstructure Refinement and Mechanical Properties of Al A357-1.5 wt% SiC Nanocomposites. International Journal of Metalcasting 12:3, pages 565-573.
Crossref
Crossref
Arvind Kumar & R N Rai. (2018)
Fabrication, Microstructure and Mechanical Properties of Boron Carbide (B
4
C
p
) Reinforced Aluminum Metal Matrix Composite - A Review
. IOP Conference Series: Materials Science and Engineering 377, pages 012092.
Crossref
Crossref
Ankit Gupta, Manowar Hussain, Saurav Misra, Alok Kumar Das & Amitava Mandal. (2018) Processing and characterization of laser sintered hybrid B 4 C/cBN reinforced Ti-based metal matrix composite. Optics and Lasers in Engineering 105, pages 159-172.
Crossref
Crossref
Long Wang, Xinli Tian, Qian Liu, Zhiyuan Wu, Xiujian Tang & Defa Li. (2017) Grinding burn evaluation for 20CrMnTi steel based on binary images and neural network. The International Journal of Advanced Manufacturing Technology 93:9-12, pages 4033-4042.
Crossref
Crossref
Long Wang, Xinli Tian, Qian Liu, Xiujian Tang, Lijun Yang & Hang Long. (2017) Surface integrity analysis of 20CrMnTi steel gears machined using the WD-201 microcrystal corundum grinding wheel. The International Journal of Advanced Manufacturing Technology 93:5-8, pages 2903-2912.
Crossref
Crossref
Mehmet Ipekoglu, Amin Nekouyan, Onder Albayrak & Sabri Altintas. (2017)
Mechanical characterization of B
4
C reinforced aluminum matrix composites produced by squeeze casting
. Journal of Materials Research 32:3, pages 599-605.
Crossref
Crossref
Qiyao Hu, Haidong Zhao & Fangdong Li. (2017) Microstructures and properties of SiC particles reinforced aluminum-matrix composites fabricated by vacuum-assisted high pressure die casting. Materials Science and Engineering: A 680, pages 270-277.
Crossref
Crossref