Advanced search
Publication Cover
Materials and Manufacturing Processes Volume 32, 2017 - Issue 13
Submit an article Journal homepage
334
Views
39
CrossRef citations to date
0
Altmetric
Original Articles

Performance of multi-walled carbon nanotube-based nanofluid in turning operation

Roja Abraham RajuMechanical Engineering Department, Visvesvaraya National Institute of Technology, North Ambazari, Nagpur, IndiaORCID Iconhttp://orcid.org/0000-0001-6701-3306
ORCID Icon,
Atul AndhareMechanical Engineering Department, Visvesvaraya National Institute of Technology, Nagpur, IndiaCorrespondence[email protected]
&
Neelesh Kumar SahuMechanical Engineering Department, Visvesvaraya National Institute of Technology, Nagpur, IndiaORCID Iconhttp://orcid.org/0000-0001-6488-7585
ORCID Icon
Pages 1490-1496 | Received 12 May 2016, Accepted 01 Dec 2016, Published online: 08 Feb 2017

Citations (39)

Keep up to date with the latest research on this topic with citation updates for this article.

Subscribe to citation updates

Read on this site (9)

Nazma Sultana & N. R. Dhar. (2022) A critical review on the progress of MQL in machining hardened steels. Advances in Materials and Processing Technologies 8:4, pages 3834-3858.
Read now
Thrinadh Jadam, Saurav Datta & Manoj Masanta. (2021) Studies on chip morphology and modes of tool wear during machining of Ti-6Al-4V using uncoated carbide tool: application of multi-walled carbon nanotubes added rice bran oil as nanocutting fluid. Machining Science and Technology 25:2, pages 237-287.
Read now
Rahul Anand, Ankush Raina, Mir Irfan Ul Haq, M. J. Mir, Ovais Gulzar & M. F. Wani. (2021) Synergism of TiO2 and Graphene as Nano-Additives in Bio-Based Cutting Fluid—An Experimental Investigation. Tribology Transactions 64:2, pages 350-366.
Read now
Anshuman Das, Saroj Kumar Patel, Manoranjan Arakha, Abhijit Dey & Bibhuti Bhushan Biswal. (2021) Processing of hardened steel by MQL technique using nano cutting fluids. Materials and Manufacturing Processes 36:3, pages 316-328.
Read now
Arul Kulandaivel & Senthil Kumar. (2020) Effect of magneto rheological minimum quantity lubrication on machinability, wettability and tribological behavior in turning of Monel K500 alloy. Machining Science and Technology 24:5, pages 810-836.
Read now
Santhanakumar Muthuvel, M. Naresh Babu & N. Muthukrishnan. (2020) Copper nanofluids under minimum quantity lubrication during drilling of AISI 4140 steel. Australian Journal of Mechanical Engineering 18:sup1, pages S151-S164.
Read now
M. Naresh Babu & N. Muthukrishnan. (2020) Experimental analysis in drilling of AA 5052 using copper nanofluids under minimum quantity lubrication. Australian Journal of Mechanical Engineering 18:sup1, pages S15-S24.
Read now
Lai Zou, Heng Li, Yinguang Yang & Yun Huang. (2020) Feasibility study of minimum quantity lubrication assisted belt grinding of titanium alloys. Materials and Manufacturing Processes 35:9, pages 961-968.
Read now
Rahul Katna, Kanwarjeet Singh, Narayan Agrawal & Swati Jain. (2017) Green manufacturing—performance of a biodegradable cutting fluid. Materials and Manufacturing Processes 32:13, pages 1522-1527.
Read now

Articles from other publishers (30)

Talwinder Singh, Chandan Deep Singh & Rajdeep Singh. (2023) A review on minimum quantity lubrication (MQL) assisted machining processes using mono and hybrid nanofluids. Industrial Lubrication and Tribology 75:9, pages 1054-1076.
Crossref
Gurpreet Singh, Shubham Sharma, A.H. Seikh, Changhe Li, Yanbin Zhang, S. Rajkumar, Abhinav Kumar, Rajesh Singh & Sayed M. Eldin. (2023) A novel study on the influence of graphene-based nanofluid concentrations on the response characteristics and surface-integrity of Hastelloy C-276 during minimum quantity lubrication. Heliyon 9:9, pages e19175.
Crossref
M. Naresh Babu, V. Anandan, Çağrı Vakkas Yıldırım, M. Dinesh Babu & Murat Sarıkaya. (2022) Investigation of the characteristic properties of graphene-based nanofluid and its effect on the turning performance of Hastelloy C276 alloy. Wear 510-511, pages 204495.
Crossref
M. Naresh Babu, V. Anandan, N. L. Parthasarathi, Cagri Vakkas Yildirim, M. Dinesh Babu & Sudhansu Ranjan Das. (2022) Performance analysis in turning of D3 tool steel using silver nanoplatelets as additives under MQL. Journal of the Brazilian Society of Mechanical Sciences and Engineering 44:12.
Crossref
Anup A Junankar, Yashpal Yashpal & Jayant K Purohit. (2021) Experimental investigation to study the effect of synthesized and characterized monotype and hybrid nanofluids in minimum quantity lubrication assisted turning of bearing steel. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 236:9, pages 1794-1813.
Crossref
Maisarah Kursus, Pay Jun Liew, Nor Azwadi Che Sidik & Jingsi Wang. (2022) Recent progress on the application of nanofluids and hybrid nanofluids in machining: a comprehensive review. The International Journal of Advanced Manufacturing Technology 121:3-4, pages 1455-1481.
Crossref
Quanwei Yang, Ben Wang, Jiawei Deng, Yaohui Zheng & Xianjun Kong. (2022) The effect of addition of MWCNT nanoparticles to CryoMQL conditions on tool wear patterns, tool life, roughness, and temperature in turning of Ti–6Al–4 V. The International Journal of Advanced Manufacturing Technology 120:7-8, pages 5587-5604.
Crossref
Zafar Said, L. Syam Sundar, Arun Kumar Tiwari, Hafiz Muhammad Ali, Mohsen Sheikholeslami, Evangelos Bellos & Hamza Babar. (2022) Recent advances on the fundamental physical phenomena behind stability, dynamic motion, thermophysical properties, heat transport, applications, and challenges of nanofluids. Physics Reports 946, pages 1-94.
Crossref
Mohamed Abubakr, Hussien Hegab, Tarek A. Osman, Farida Elharouni, Hossam A. Kishawy & Amal M. K. Esawi. 2020. Handbook of Carbon Nanotubes. Handbook of Carbon Nanotubes 1 32 .
Mohamed Abubakr, Hussien Hegab, Tarek A. Osman, Farida Elharouni, Hossam A. Kishawy & Amal M. K. Esawi. 2022. Handbook of Carbon Nanotubes. Handbook of Carbon Nanotubes 1501 1532 .
Shuiquan Huang, Hui Wu, Zhengyi Jiang & Han Huang. (2021) Water-based nanosuspensions: Formulation, tribological property, lubrication mechanism, and applications. Journal of Manufacturing Processes 71, pages 625-644.
Crossref
H. Hegab, A. Salem, S. Rahnamayan & H.A. Kishawy. (2021) Analysis, modeling, and multi-objective optimization of machining Inconel 718 with nano-additives based minimum quantity coolant. Applied Soft Computing 108, pages 107416.
Crossref
Kishan Zadafiya, Prassan Shah, Alborz Shokrani & Navneet Khanna. (2021) Recent advancements in nano-lubrication strategies for machining processes considering their health and environmental impacts. Journal of Manufacturing Processes 68, pages 481-511.
Crossref
Kumaran Kadirgama. (2021) A comprehensive review on the application of nanofluids in the machining process. The International Journal of Advanced Manufacturing Technology 115:9-10, pages 2669-2681.
Crossref
Samarpan Deb Majumder & Ankit Das. (2021) A Short Review of Organic Nanofluids: Preparation, Surfactants, and Applications. Frontiers in Materials 8.
Crossref
Anup A. Junankar, Sachin R. Parate, Pratik K. Dethe, Nikhil R. Dhote, Dinesh G. Gadkar, Devanand D. Gadkar & Samyak A. Gajbhiye. (2021) Optimization of bearing steel turning parameters under CuO and ZnO nanofluid-MQL using MCDM hybrid approach. Materials Today: Proceedings 47, pages 4292-4297.
Crossref
A.A. Junankar, Yashpal, J.K. Purohit, G.M. Gohane, J.S. Pachbhai, P.M. Gupta & A.R. Sayed. (2021) Performance evaluation of Cu nanofluid in bearing steel MQL based turning operation. Materials Today: Proceedings 44, pages 4309-4314.
Crossref
Mohamed Abubakr, Hussien Hegab, Tarek A. Osman, Farida Elharouni, Hossam A. Kishawy & Amal M. K. Esawi. 2020. Handbook of Carbon Nanotubes. Handbook of Carbon Nanotubes 1 32 .
Srinu Gugulothu & Vamsi Krishna Pasam. (2020) Testing and Performance Evaluation of Vegetable-Oil–Based Hybrid Nano Cutting Fluids. Journal of Testing and Evaluation 48:5, pages 20180106.
Crossref
Oğuzhan Öndin, Turgay Kıvak, Murat Sarıkaya & Çağrı Vakkas Yıldırım. (2020) Investigation of the influence of MWCNTs mixed nanofluid on the machinability characteristics of PH 13-8 Mo stainless steel. Tribology International 148, pages 106323.
Crossref
Israt Sharmin, Md. Abdul Gafur & Nikhil Ranjan Dhar. (2020) Preparation and evaluation of a stable CNT-water based nano cutting fluid for machining hard-to-cut material. SN Applied Sciences 2:4.
Crossref
V. Anandan, M. Naresh Babu, N. Muthukrishnan & M. Dinesh Babu. (2020) Performance of silver nanofluids with minimum quantity lubrication in turning on titanium: a phase to green manufacturing. Journal of the Brazilian Society of Mechanical Sciences and Engineering 42:4.
Crossref
Ramanuj Kumar, Ashok Kumar Sahoo, Purna Chandra Mishra & Rabin Kumar Das. (2019) Influence of Al2O3 and TiO2 nanofluid on hard turning performance. The International Journal of Advanced Manufacturing Technology 106:5-6, pages 2265-2280.
Crossref
Rahul Anand, Mir Irfan Ul Haq & Ankush Raina. 2020. Nanomaterials and Environmental Biotechnology. Nanomaterials and Environmental Biotechnology 333 380 .
Çağrı Yıldırım. (2019) Effect of Nanofluid on Cutting Temperature in Turning of Inconel 625 with Ceramic Tools. Academic Perspective Procedia 2:3, pages 370-380.
Crossref
Muhammad Jamil, Aqib Mashood Khan, Hussien Hegab, Le Gong, Mozammel Mia, Munish K. Gupta & Ning He. (2019) Effects of hybrid Al2O3-CNT nanofluids and cryogenic cooling on machining of Ti–6Al–4V. The International Journal of Advanced Manufacturing Technology 102:9-12, pages 3895-3909.
Crossref
Talwinder Singh, J.S. Dureja, Manu Dogra & Manpreet S. Bhatti. (2019) Multi-response optimization in environment friendly turning of AISI 304 austenitic stainless steel. Multidiscipline Modeling in Materials and Structures 15:3, pages 538-558.
Crossref
Hussien Hegab & Hossam Kishawy. (2018) Towards Sustainable Machining of Inconel 718 Using Nano-Fluid Minimum Quantity Lubrication. Journal of Manufacturing and Materials Processing 2:3, pages 50.
Crossref
K. Ganesan, M. Naresh Babu, M. Santhanakumar & N. Muthukrishnan. (2018) Experimental investigation of copper nanofluid based minimum quantity lubrication in turning of H 11 steel. Journal of the Brazilian Society of Mechanical Sciences and Engineering 40:3.
Crossref
Rabesh Kumar Singh, Amit Rai Dixit, Amitava Mandal & Anuj Kumar Sharma. (2017) Emerging application of nanoparticle-enriched cutting fluid in metal removal processes: a review. Journal of the Brazilian Society of Mechanical Sciences and Engineering 39:11, pages 4677-4717.
Crossref

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.