https://orcid.org/0000-0001-7364-9837
Citations (50)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (12)
Burak Ozdemir, Erol Kilickap, Erkan Bahce, Ahmet Yardimeden & Ender Emir. (2024) Optimization of parameters for drilling composite materials with freeform surfaces. Materials and Manufacturing Processes 39:1, pages 55-68.
Read now
Read now
Bin Luo, Guoyi Hou, Kaifu Zhang & Hui Cheng. (2023) Hole-wall temperature characteristics in thick UD-CFRP drilling by different condition. Materials and Manufacturing Processes 0:0, pages 1-14.
Read now
Read now
D. Rajamani, E. Balasubramanian, A. Murugan & A. Tamilarasan. (2023) AWJC of NiTi interleaved r-GO embedded carbon/aramid fibre intermetallic laminates: Experimental investigations and optimization through BMOA. Materials and Manufacturing Processes 38:9, pages 1144-1158.
Read now
Read now
Mehdi Gerami, Masoud Farahnakian & Sadegh Elhami Joosheghan. (2022) Effect of grooving textured tool on the titanium chip morphology. Materials and Manufacturing Processes 37:9, pages 1013-1021.
Read now
Read now
Jinyang Xu, Tieyu Lin, Ming Chen & J. Paulo Davim. (2021) Machining responses of high-strength carbon/epoxy composites using diamond-coated brad spur drills. Materials and Manufacturing Processes 36:6, pages 722-729.
Read now
Read now
M. Rajesh, K. Rajkumar & V. E Annamalai. (2021) Abrasive water jet machining on Ti metal-interleaved basalt-flax fiber laminate. Materials and Manufacturing Processes 36:3, pages 329-340.
Read now
Read now
Mete Kayihan, Umut Karaguzel & Mustafa Bakkal. (2021) Experimental analysis on drilling of Al/Ti/CFRP hybrid composites. Materials and Manufacturing Processes 36:2, pages 215-222.
Read now
Read now
Lai Zou, Heng Li, Yinguang Yang & Yun Huang. (2020) Feasibility study of minimum quantity lubrication assisted belt grinding of titanium alloys. Materials and Manufacturing Processes 35:9, pages 961-968.
Read now
Read now
Avinash Khadtare, Raju Pawade, Alwin Varghese & Suhas Joshi. (2020) Micro-drilling of straight and inclined holes on thermal barrier coated Inconel 718 for turbine blade cooling. Materials and Manufacturing Processes 35:7, pages 783-796.
Read now
Read now
Fausto Tucci, Renato Bezerra, Felice Rubino & Pierpaolo Carlone. (2020) Multiphase flow simulation in injection pultrusion with variable properties. Materials and Manufacturing Processes 35:2, pages 152-162.
Read now
Read now
U. Prisco, A. Astarita, A. El Hassanin & S. Franchitti. (2019) Influence of processing parameters on microstructure and roughness of electron beam melted Ti-6Al-4V titanium alloy. Materials and Manufacturing Processes 34:15, pages 1753-1760.
Read now
Read now
Jinyang Xu, Min Ji, Ming Chen & Fei Ren. (2019) Investigation of minimum quantity lubrication effects in drilling CFRP/Ti6Al4V stacks. Materials and Manufacturing Processes 34:12, pages 1401-1410.
Read now
Read now
Articles from other publishers (38)
Xuan Li & Patrick Harkness. (2023) Rock drilling performance of rotary ultrasonic tools incorporating PZT piezoceramic and Mn:PIN-PMN-PT piezocrystal. Sensors and Actuators A: Physical 364, pages 114849.
Crossref
Crossref
Dexiong Chen, Hai Lin, Yan Chen, Chaoren Yan & Jiuhua Xu. (2023) Wear behaviors of PCD and diamond-coated tools during low-frequency vibration-assisted drilling CFRP/Ti stacks. The International Journal of Advanced Manufacturing Technology 128:1-2, pages 595-609.
Crossref
Crossref
Hwa-Sub Lee, Dong-Hyun Seo, HyunHo Lee, Jin Hyeong Kim & Eun-Chae Jeon. (2023) Analysis of the Correlation between the Theoretical and Measured Surface Roughness Values of Difficult-to-Cut Materials Subjected
to Drilling. Journal of the Korean Society of Manufacturing Process Engineers 22:8, pages 55-62.
Crossref
Crossref
Jinyang Xu, Vitalii Kolesnyk, Changping Li, Bohdan Lysenko, Jozef Peterka & Munish Kumar Gupta. (2023) A critical review addressing conventional twist drilling mechanisms and quality of CFRP/Ti stacks. Journal of Materials Research and Technology 24, pages 6614-6651.
Crossref
Crossref
S. Joyson Selvakumar.S. Muthiah Muralidharan.Samuel Raj D.. (2023) Performance analysis of drills with structured surfaces when drilling CFRP/AA7075 stack under MQL condition. Journal of Manufacturing Processes 89, pages 194-219.
Crossref
Crossref
Kiran Mughal, Mohammad Pervez Mughal, Muhammad Umar Farooq, Muhammad Qaiser Saleem & Rodolfo Haber Guerra. (2023) Helical Milling of CFRP/Ti6Al4V Stacks Using Nano Fluid Based Minimum Quantity Lubrication (NF-MQL): Investigations on Process Performance and Hole Integrity. Materials 16:2, pages 566.
Crossref
Crossref
Snobin Mathew & K. Shunmugesh. (2023) Application of grey-fuzzy logic for the optimization of drilling parameters for coir fibre reinforced composite. Materials Today: Proceedings 72, pages 2082-2088.
Crossref
Crossref
Jebaratnam Joy Mathavan, Muhammad Hafiz Hassan, Jinyang Xu & Gérald Franz. (2022) Hole Quality Observation in Single-Shot Drilling of CFRP/Al7075-T6 Composite Metal Stacks Using Customized Twist Drill Design. Journal of Composites Science 6:12, pages 378.
Crossref
Crossref
Weiyu Zhu, Hongge Fu, Fei Li, Xu Ji, Yuqing Li & Fan Bai. (2022) Optimization of CFRP drilling process: a review. The International Journal of Advanced Manufacturing Technology 123:5-6, pages 1403-1432.
Crossref
Crossref
Gérald Franz, Pascal Vantomme & Muhammad Hafiz Hassan. (2022) A Review on Drilling of Multilayer Fiber-Reinforced Polymer Composites and Aluminum Stacks: Optimization of Strategies for Improving the Drilling Performance of Aerospace Assemblies. Fibers 10:9, pages 78.
Crossref
Crossref
SHIVI KESARWANI & RAJESH KUMAR VERMA. (2022) A NOVEL HYBRIDIZATION OF SEAGULL ALGORITHM AND COMBINED COMPROMISE SOLUTION (SOA–CoCoSo) IN DRILLING INVESTIGATION OF CARBON NANO-ONION-MODIFIED POLYMER COMPOSITES FOR STRUCTURAL APPLICATION. Surface Review and Letters 29:04.
Crossref
Crossref
Jinyang Xu, Tieyu Lin, Linfeng Li, Min Ji, J. Paulo Davim, Norbert Geier & Ming Chen. (2022) Numerical study of interface damage formation mechanisms in machining CFRP/Ti6Al4V stacks under different cutting sequence strategies. Composite Structures 285, pages 115236.
Crossref
Crossref
Gururaj Bolar, Advith K. Sridhar & Aashrayi Ranjan. (2022) Drilling and helical milling for hole making in multi-material carbon reinforced aluminum laminates. International Journal of Lightweight Materials and Manufacture 5:1, pages 113-125.
Crossref
Crossref
Ioan Alexandru Popan, Nicolae Balc & Alina Ioana Popan. (2021) Avoiding carbon fibre reinforced polymer delamination during abrasive water jet piercing: a new piercing method. The International Journal of Advanced Manufacturing Technology 119:1-2, pages 1139-1152.
Crossref
Crossref
Yifei Zhang, Dun Liu, Weijie Zhang, Hongtao Zhu & Chuanzhen Huang. (2021) Damage study of fiber-reinforced composites drilled by abrasive waterjet —challenges and opportunities. The International Journal of Advanced Manufacturing Technology 119:1-2, pages 41-55.
Crossref
Crossref
Ali MotorcuRizaRiza & Ergün Ekici. (2022) Evaluation and multi-criteria optimization of surface roughness, deviation from dimensional accuracy and roundness error in drilling CFRP/Ti6Al4 stacks. FME Transactions 50:3, pages 441-460.
Crossref
Crossref
Lhoucine BOUTRIH, Hamid MAKICH, Mohammed NOUARI & Lanouar BEN AYED. (2022) Surface Quality in Dry Machining of CFRP Composite/Ti6Al4V Stack Laminate. Procedia CIRP 108, pages 758-763.
Crossref
Crossref
Yuhe Zou, Guang Chen, Chengzu Ren, Jiaying Ge & Xuda Qin. (2021) Performance and mechanism of hole-making of CFRP/Ti-6Al-4V stacks using ultrasonic vibration helical milling process. The International Journal of Advanced Manufacturing Technology 117:11-12, pages 3529-3547.
Crossref
Crossref
Fermin Bañon, Alejandro Sambruno, Moises Batista, Bartolome Simonet & Jorge Salguero. (2021) Evaluation of geometrical defects in AWJM process of a hybrid CFRTP/Steel structure. International Journal of Mechanical Sciences 210, pages 106748.
Crossref
Crossref
U. Hari Babu, N. Vijaya Sai & Ranjeet Kumar Sahu. (2020) Artificial Intelligence System Approach for Optimization of Drilling Parameters of Glass-Carbon Fiber/Polymer Composites. Silicon 13:9, pages 2943-2957.
Crossref
Crossref
Heng Zhang, Jiaqiang Dang, Qinglong An, Xiaojiang Cai & Ming Chen. (2021) Study on the drilling performances of a newly developed CFRP/invar co-cured material. Journal of Manufacturing Processes 66, pages 669-678.
Crossref
Crossref
Ben Wang, Yufeng Wang, Hua Zhao, Minghai Wang & Lei Sun. (2021) Mechanisms and evaluation of the influence of cutting temperature on the damage of CFRP by helical milling. The International Journal of Advanced Manufacturing Technology 113:7-8, pages 1887-1897.
Crossref
Crossref
Mohd Fathullah Ghazali, Mohd Mustafa Al Bakri Abdullah, Shayfull Zamree Abd Rahim, Joanna Gondro, Paweł Pietrusiewicz, Sebastian Garus, Tomasz Stachowiak, Andrei Victor Sandu, Muhammad Faheem Mohd Tahir, Mehmet Erdi Korkmaz & Mohamed Syazwan Osman. (2021) Tool Wear and Surface Evaluation in Drilling Fly Ash Geopolymer Using HSS, HSS-Co, and HSS-TiN Cutting Tools. Materials 14:7, pages 1628.
Crossref
Crossref
Lhoucine Boutrih, Lanouar Ben Ayed & Mohammed Nouari. (2021) Modeling of the interface delamination process when machining hybrid multi-material assemblies. The International Journal of Advanced Manufacturing Technology 112:7-8, pages 1903-1916.
Crossref
Crossref
Ben Wang, Yufeng Wang, Hua Zhao, Lei Sun, Minghai Wang & Xianjun Kong. (2020) Effect of a Ti alloy layer on CFRP hole quality during helical milling of CFRP/Ti laminate. Composite Structures 252, pages 112670.
Crossref
Crossref
Muhammad Aamir, Majid Tolouei-Rad, Khaled Giasin & Ana Vafadar. (2020) Machinability of Al2024, Al6061, and Al5083 alloys using multi-hole simultaneous drilling approach. Journal of Materials Research and Technology 9:5, pages 10991-11002.
Crossref
Crossref
Jinyang Xu, Min Ji, Ming Chen & Mohamed El Mansori. (2020) Experimental investigation on drilling machinability and hole quality of CFRP/Ti6Al4V stacks under different cooling conditions. The International Journal of Advanced Manufacturing Technology 109:5-6, pages 1527-1539.
Crossref
Crossref
Jiratti Tengsuthiwat, Mavinkere Rangappa Sanjay, Suchart Siengchin & Catalin I. Pruncu. (2020) 3D-MID Technology for Surface Modification of Polymer-Based Composites: A Comprehensive Review. Polymers 12:6, pages 1408.
Crossref
Crossref
A. K. Parida, P. V. Rao & S. Ghosh. (2020) Performance of textured tool in turning of Ti–6Al–4V alloy: numerical analysis and experimental validation. Journal of the Brazilian Society of Mechanical Sciences and Engineering 42:5.
Crossref
Crossref
Jinyang Xu, Min Ji & Ming Chen. (2020) On the quantitative analysis of drill edge wear when machining CFRP/Ti6Al4V stacks. The International Journal of Advanced Manufacturing Technology 108:5-6, pages 1463-1472.
Crossref
Crossref
Amani Mahdi, Yosra Turki, Malek Habak, Mehdi Salem & Zoubeir Bouaziz. (2020) Experimental study of thrust force and surface quality when drilling hybrid stacks. The International Journal of Advanced Manufacturing Technology 107:9-10, pages 3981-3994.
Crossref
Crossref
Zhen-yuan Jia, Chong Zhang, Fu-ji Wang, Rao Fu & Chen Chen. (2020) Multi-margin drill structure for improving hole quality and dimensional consistency in drilling Ti/CFRP stacks. Journal of Materials Processing Technology 276, pages 116405.
Crossref
Crossref
Jinyang Xu, Chao Li, Ming Chen, Mohamed El Mansori & J. Paulo Davim. (2020) On the analysis of temperatures, surface morphologies and tool wear in drilling CFRP/Ti6Al4V stacks under different cutting sequence strategies. Composite Structures 234, pages 111708.
Crossref
Crossref
Zhen-yuan Jia, Chen Chen, Fu-ji Wang, Chong Zhang & Qi Wang. (2020) Analytical model for delamination of CFRP during drilling of CFRP/metal stacks. The International Journal of Advanced Manufacturing Technology 106:11-12, pages 5099-5109.
Crossref
Crossref
Min Ji, Jinyang Xu, Ming Chen & Mohamed EI Mansori. (2020) Effects of Different Cooling Methods on the Specific Energy Consumption when Drilling CFRP/Ti6Al4V Stacks. Procedia Manufacturing 43, pages 95-102.
Crossref
Crossref
Jiaqiang Dang, Fan Zou, Xiaojiang Cai, Qinglong An, Weiwei Ming & Ming Chen. (2019) Experimental investigation on mechanical drilling of a newly developed CFRP/Al co-cured material. The International Journal of Advanced Manufacturing Technology 106:3-4, pages 993-1004.
Crossref
Crossref
Chenbing Ni, Lida Zhu & Zhichao Yang. (2019) Comparative investigation of tool wear mechanism and corresponding machined surface characterization in feed-direction ultrasonic vibration assisted milling of Ti–6Al–4V from dynamic view. Wear 436-437, pages 203006.
Crossref
Crossref
Umberto Prisco, Filomena Impero & F. Rubino. (2019) Peck drilling of CFRP/titanium stacks: effect of tool wear on hole dimensional and geometrical accuracy. Production Engineering 13:5, pages 529-538.
Crossref
Crossref