https://orcid.org/0000-0002-5891-2665
Citations (55)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (20)
Dil Bahar, Akshay Dvivedi & Pradeep Kumar. (2023) On innovative approach in ECDM process by controlling the temperature and stirring rate of the electrolyte. Materials and Manufacturing Processes 0:0, pages 1-19.
Read now
Read now
Nitin Dixit, Varun Sharma & Pradeep Kumar. (2023) Experimental investigations into ultrasonic assisted magnetic abrasive flow machining process. Materials and Manufacturing Processes 38:10, pages 1291-1306.
Read now
Read now
Ning Chen, Linglei Kong, Weining Lei & Rui Qiu. (2023) Experimental study on EDM of CFRP based on graphene aqueous solution. Materials and Manufacturing Processes 38:9, pages 1180-1189.
Read now
Read now
R. Vijayakumar, N. Srirangarajalu, M. Santhanakumar & R. Adalarasan. (2023) Investigation in µ-WEDM of Inconel 625 superalloy using RSM-CCD technique. Materials and Manufacturing Processes 38:4, pages 449-460.
Read now
Read now
Xuefei Du, Yanfeng Guo, Yungang Fu & Meijuan Ji. (2023) Influence of HT on energy absorption in CLS compression process. Materials and Manufacturing Processes 38:2, pages 228-234.
Read now
Read now
Anuj Vats, Akshay Dvivedi & Pradeep Kumar. (2022) Investigation of hole roundness-error using different electrolytes in STED process. Materials and Manufacturing Processes 37:12, pages 1405-1421.
Read now
Read now
Mahavir Singh, V. K. Jain & J. Ramkumar. (2022) 3-D fabrication using electrical discharge-milling: an overview. Materials and Manufacturing Processes 37:11, pages 1215-1245.
Read now
Read now
Surendra Singh, Brijesh Patel, Rajeev Kumar Upadhyay & Nishant K. Singh. (2022) Improvement of process performance of powder mixed electrical discharge machining by optimisation -A Review. Advances in Materials and Processing Technologies 8:3, pages 3074-3104.
Read now
Read now
Xiaokang Chen, Jianping Zhou, Kedian Wang & Yan Xu. (2022) Experimental research on single-pulse discharge crater morphology in SEAM. Materials and Manufacturing Processes 37:6, pages 664-673.
Read now
Read now
Tarlochan Singh & Akshay Dvivedi. (2022) Impact of gas film thickness on the performance of RM-ECDM process during machining of glass. Materials and Manufacturing Processes 37:6, pages 652-663.
Read now
Read now
Bin Xu, Tao Feng, Xiaoyu Wu, Feng Luo, Jianguo Lei, Jun Yang & Shiyun Wu. (2022) Micro-EDM of micro-stepped hole based on the wear of micro-bit. Materials and Manufacturing Processes 37:3, pages 349-358.
Read now
Read now
Hreetabh Kishore, Chandrakant K. Nirala, Anupam Agrawal & Basil Kuriachen. (2021) Assessment of process parameters and performance enhancement through a novel suction flushing technology in RµEDM. Materials and Manufacturing Processes 36:13, pages 1476-1488.
Read now
Read now
Nishant K. Singh, Yashvir Singh, Abhishek Sharma, Amneesh Singla & Prateek Negi. (2021) An environmental-friendly electrical discharge machining using different sustainable techniques: a review. Advances in Materials and Processing Technologies 7:4, pages 537-566.
Read now
Read now
Deepak Kumar, Vivek Bajpai & Nirmal Kumar Singh. (2021) Nano electrical discharge machining – the outlook, challenges, and opportunities. Materials and Manufacturing Processes 36:10, pages 1099-1133.
Read now
Read now
Zhao-Wei Zhong. (2021) Processes for environmentally friendly and/or cost-effective manufacturing. Materials and Manufacturing Processes 36:9, pages 987-1009.
Read now
Read now
Ramver Singh, Akshay Dvivedi & Pradeep Kumar. (2020) EDM of high aspect ratio micro-holes on Ti-6Al-4V alloy by synchronizing energy interactions. Materials and Manufacturing Processes 35:11, pages 1188-1203.
Read now
Read now
Xiangzhi Wang, Chaojiang Li, Hun Guo, Guangxian Li & Songlin Ding. (2020) Moving arc electrical discharge machining of polycrystalline diamond. Materials and Manufacturing Processes 35:4, pages 449-459.
Read now
Read now
Deepti Ranjan Sahu & Amitava Mandal. (2020) Critical analysis of surface integrity parameters and dimensional accuracy in powder-mixed EDM. Materials and Manufacturing Processes 35:4, pages 430-441.
Read now
Read now
Vineet Kumar Yadav, Pradeep Kumar & Akshay Dvivedi. (2019) Performance enhancement of rotary tool near-dry EDM of HSS by supplying oxygen gas in the dielectric medium. Materials and Manufacturing Processes 34:16, pages 1832-1846.
Read now
Read now
Krishnakant Dhakar, Kuldeep Chaudhary, Akshay Dvivedi & Omkar Bembalge. (2019) An environment-friendly and sustainable machining method: near-dry EDM. Materials and Manufacturing Processes 34:12, pages 1307-1315.
Read now
Read now
Articles from other publishers (35)
Anuj Vats, Ramver Singh, Akshay Dvivedi & Pradeep Kumar. (2023) Enhancing Surface Integrity of Micro-Holes Machined on Inconel 718 using Shaped Tube Electrochemical Machining via Hydroxide Mixing. Journal of The Electrochemical Society.
Crossref
Crossref
Prasan Ralph Dewan & Pranab Kumar Kundu. (2023) Optimizing process parameters for EDM of nimonic C-263 under green dielectric. Sādhanā 48:4.
Crossref
Crossref
Ramver Singh, Vineet Kumar Yadav, Akshay Dvivedi & Pradeep Kumar. (2022) Evaluating the Feasibility of Using Biodegradable Castor Oil as a Dielectric Medium during Micro-Electrical Discharge Machining of Inconel 718. Journal of Materials Engineering and Performance 32:14, pages 6465-6477.
Crossref
Crossref
Rakesh Kumar Patel & Mohan Kumar Pradhan. (2023) Machining of nickel-based super alloy inconel 718 using alumina nanofluid in powder mixed electric discharge machining. Materials Research Express.
Crossref
Crossref
Ravinder Kumar & Sahendra Pal Sharma. (2022) Electric discharge drilling of blind holes in titanium alloy Ti6Al4V. World Journal of Engineering.
Crossref
Crossref
Krishnakant Dhakar, Rahul Kumar, Ankush Katheria, Leeladhar Nagdeve & Harish Kumar. (2022) Effect of various dielectric fluids on electric discharge machining (EDM): a review. Journal of the Brazilian Society of Mechanical Sciences and Engineering 44:10.
Crossref
Crossref
Vineet Kumar Yadav, Ramver Singh, Pradeep Kumar & Akshay Dvivedi. (2022) Investigating the Performance of the Rotary Tool Near-Dry Electrical Discharge Machining Process through Debris Analysis. Journal of Materials Engineering and Performance 31:10, pages 8405-8417.
Crossref
Crossref
RAMAZAN ÇAKIROĞLU. (2022) Analysis of EDM machining parameters for keyway on Ti-6Al-4V alloy and modelling by artificial neural network and regression analysis methods. Sādhanā 47:3.
Crossref
Crossref
V N Jishnu Namboodiri, Ribin Varghese Pazhamannil & P Govindan. (2022) Finite Element based Numerical Modelling of Near-Dry EDM with Glycerin-Air Dielectric Mixture. IOP Conference Series: Materials Science and Engineering 1248:1, pages 012019.
Crossref
Crossref
Xi-Peng Gong, Ting-Yi Yang, Xue Bai, Li Li & Guang-Fen Jiang. (2022) Experimental research on EDM-milling of sintered NdFeB. The International Journal of Advanced Manufacturing Technology 121:3-4, pages 2415-2425.
Crossref
Crossref
Yi Jiang, Linglei Kong, Jianfeng Yu, Chunjian Hua & Wansheng Zhao. (2022) Experimental investigation on the effects of green dielectric medium air and argon on the near-dry electrical discharge machining of titanium alloy. The International Journal of Advanced Manufacturing Technology 120:11-12, pages 7609-7625.
Crossref
Crossref
G. Karthik Pandiyan, T. Prabaharan, D. Jafrey Daniel James & Vinothkumar Sivalingam. (2022) Machinability Analysis and Optimization of Electrical Discharge Machining in AA6061-T6/15wt.% SiC Composite by the Multi-criteria Decision-Making Approach. Journal of Materials Engineering and Performance 31:5, pages 3741-3752.
Crossref
Crossref
Linglei Kong, Weining Lei, Qun Wei, Jinjin Han, Zhang Suorong, Qilin Li, Xiangzhi Wang & Zhidong Liu. (2022) Experimental investigations into the performance of die-sinking mixed-gas atomization discharge ablation process on titanium alloy. Scientific Reports 12:1.
Crossref
Crossref
Binoy Kumar Baroi, Jagadish & Promod Kumar Patowari. (2022) A review on sustainability, health, and safety issues of electrical discharge machining. Journal of the Brazilian Society of Mechanical Sciences and Engineering 44:2.
Crossref
Crossref
Akash Gupta & V. K. Dwivedi. 2022. Advances in Mechanical and Materials Technology. Advances in Mechanical and Materials Technology
825
839
.
Van Tao Le, Tien Long Banh, Tien Lap Do & Thanh Huan Nguyen. 2022. Proceedings of the International Conference on Advanced Mechanical Engineering, Automation, and Sustainable Development 2021 (AMAS2021). Proceedings of the International Conference on Advanced Mechanical Engineering, Automation, and Sustainable Development 2021 (AMAS2021)
316
322
.
Gurpreet Singh & D. R. Prajapati. (2021) Process performance optimization of μEDM aided with ultrasonic vibration and magnetic force. Journal of the Brazilian Society of Mechanical Sciences and Engineering 43:11.
Crossref
Crossref
Ravinder Kumar & Inderdeep Singh. (2021) Blind Hole Fabrication in Aerospace Material Ti6Al4V Using Electric Discharge Drilling: A Tool Design Approach. Journal of Materials Engineering and Performance 30:11, pages 8677-8685.
Crossref
Crossref
Linglei Kong, Xiangzhi Wang, Qing He, Jinjin Han, Zhang Suorong, Ding Kai & Zhidong Liu. (2021) Microcosmic mechanism of die-sinking mixed-gas atomization discharge ablation process on titanium alloy. The International Journal of Advanced Manufacturing Technology 117:3-4, pages 949-960.
Crossref
Crossref
S. A. Mullya, G. Karthikeyan & V. S. Ganachari. (2021) Electric discharge milling: a state-of-the-art review. Journal of the Brazilian Society of Mechanical Sciences and Engineering 43:9.
Crossref
Crossref
S Sundriyal, Vipin & RS Walia. (2021) Experimental investigation and performance enhancements characteristics of gaseous assisted powder mixed near dry electric discharge machining. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering 235:4, pages 1048-1058.
Crossref
Crossref
Manoj Prabhakar B S, Ranjith R & Venkatesan S. (2021) Characterization of electric discharge machining of titanium alloy utilizing MEIOT technique for orthopedic implants. Materials Research Express 8:8, pages 086505.
Crossref
Crossref
Nitin Dixit, Varun Sharma & Pradeep Kumar. (2021) Research trends in abrasive flow machining: A systematic review. Journal of Manufacturing Processes 64, pages 1434-1461.
Crossref
Crossref
Vineet Kumar Yadav, Ramver Singh, Pradeep Kumar & Akshay Dvivedi. (2021) Performance enhancement of rotary tool near-dry EDM process through tool modification. Journal of the Brazilian Society of Mechanical Sciences and Engineering 43:2.
Crossref
Crossref
Bauyrzhan Rakhadilov, Aidar Kengesbekov, Laila Zhurerova, Rauan Kozhanova & Zhuldyz Sagdoldina. (2021) Impact of Electronic Radiation on the Morphology of the Fine Structure of the Surface Layer of R6M5 Steel. Machines 9:2, pages 24.
Crossref
Crossref
Kanak Kalita, Dinesh S. Shinde & Ranjan Kumar Ghadai. 2021. Data-Driven Optimization of Manufacturing Processes. Data-Driven Optimization of Manufacturing Processes
151
164
.
Ramver Singh, Akshay Dvivedi & Pradeep Kumar. 2021. TMS 2021 150th Annual Meeting & Exhibition Supplemental Proceedings. TMS 2021 150th Annual Meeting & Exhibition Supplemental Proceedings
421
429
.
Sanjay Sundriyal, Jitender Yadav, R. S. Walia, Vipin & Rajesh Kumar. (2020) Thermophysical-Based Modeling of Material Removal in Powder Mixed Near-Dry Electric Discharge Machining. Journal of Materials Engineering and Performance 29:10, pages 6550-6569.
Crossref
Crossref
Ruben Phipon, Ishwer Shivakoti & Ashis Sharma. (2020) Sustainable processing of Inconel 718 super alloy in electrical discharge machining process. World Journal of Engineering 17:5, pages 687-695.
Crossref
Crossref
Ramazan Çakıroğlu & Mustafa Günay. (2020) Comprehensive analysis of material removal rate, tool wear and surface roughness in electrical discharge turning of L2 tool steel. Journal of Materials Research and Technology 9:4, pages 7305-7317.
Crossref
Crossref
Trung-Thanh Nguyen, Van-Tuan Tran & Mozammel Mia. (2020) Multi-Response Optimization of Electrical Discharge Drilling Process of SS304 for Energy Efficiency, Product Quality, and Productivity. Materials 13:13, pages 2897.
Crossref
Crossref
Himanshu Bisaria & Pragya Shandilya. (2020) Surface integrity aspects for NiTi shape memory alloys during wire electric discharge machining: A review. Journal of Materials Research 35:6, pages 537-558.
Crossref
Crossref
Ramver, Vineet Kumar Yadav, Pradeep Kumar & Akshay Dvivedi. 2020. Recent Advances in Mechanical Infrastructure. Recent Advances in Mechanical Infrastructure
69
74
.
Vineet Kumar Yadav, Ramver, Pradeep Kumar & Akshay Dvivedi. 2020. Recent Advances in Mechanical Infrastructure. Recent Advances in Mechanical Infrastructure
41
47
.
Hang Dong, Yonghong Liu, Ming Li, Yu Zhou, Tong Liu, Dege Li, Qiang Sun, Yanzhen Zhang & Renjie Ji. (2019) Sustainable electrical discharge machining using water in oil nanoemulsion. Journal of Manufacturing Processes 46, pages 118-128.
Crossref
Crossref