Rupalin Biswal & Arumaikkannu Ganesan. (2023) Experimental investigation of design parameters on geometrical accuracy of selective laser sintered parts. Journal of Manufacturing Processes 108, pages 48-61.
Crossref
Arvinder Singh Channi, Harminder Singh Bains, Jasmaninder Singh Grewal, Raman Kumar & Dharam Buddhi. (2022) Exploring the application sphere of electrical discharge machining in composite materials considering surface features: a content analysis. International Journal on Interactive Design and Manufacturing (IJIDeM) 17:5, pages 2095-2114.
Crossref
Duc Nam Nguyen, Minh Phung Dang, Shyh-Chour Huang & Thanh-Phong Dao. (2022) Computational optimization of a steel A-36 monolithic mechanism by bonobo algorithm and intelligent model for precision machining application. International Journal on Interactive Design and Manufacturing (IJIDeM) 17:5, pages 2271-2281.
Crossref
Duc Nam Nguyen, Minh Phung Dang, Tan Thang Nguyen & Thanh-Phong Dao. (2022) Intelligent computation modeling and analysis of a gripper for advanced manufacturing application. International Journal on Interactive Design and Manufacturing (IJIDeM) 17:5, pages 2185-2195.
Crossref
M. Altin Karataş & M.A. Biberci. (2022) Statistical Analysis of WEDM Machining Parameters of Ti-6Al-4V Alloy Using Taguchi-Based Grey Relational Analysis and Artificial Neural Network. Experimental Techniques 47:4, pages 851-870.
Crossref
Prabhu Sethuramalingam, M. Uma, S. Oliver Nesa Raj, Rishabh Patel & Nirup Kanti Paul. (2023) Experimental Investigations and Surface Characteristics Analysis of Titanium Alloy Using Machine Learning Techniques. Journal of Materials Engineering and Performance.
Crossref
Levent Urtekin, İbrahim Baki Şahin, Faik Yılan, Erkan Kuloğlu & Asım Genç. (2023) Investigation and Optimization of Cutting Performance of High Chrome White Cast Iron by Wire Erosion. Arabian Journal for Science and Engineering.
Crossref
Sandor Ravai-Nagy, Aurel Mihail Titu & Alina Bianca Pop. (2023) The Influence of Galvanizing on the Surface Quality and Part Precision of S235J0 Alloy Machined by Turning. Coatings 13:4, pages 701.
Crossref
Hamid Haghshenas Gorgani, Ali Jahazi, Alireza Jahantigh Pak & Sharif Shabani. (2022) A hybrid algorithm for adjusting the input parameters of the wirecut EDM machine in order to obtain maximum customer satisfaction. SN Applied Sciences 5:1.
Crossref
Rakhshanda Naveed, Kashif Ishfaq, Muhammad Harris & Naveed Ahmed. (2023) WEDM of tapered rectangular geometry in tungsten–carbide cobalt composite (WC–Co): geometrical errors and surface roughness analysis. Journal of the Brazilian Society of Mechanical Sciences and Engineering 45:1.
Crossref
Muhammad Umar Farooq, Saqib Anwar, M. Saravana Kumar, Abdullah AlFaify, Muhammad Asad Ali, Raman Kumar & Rodolfo Haber. (2022) A Novel Flushing Mechanism to Minimize Roughness and Dimensional Errors during Wire Electric Discharge Machining of Complex Profiles on Inconel 718. Materials 15:20, pages 7330.
Crossref
Ali Günen, Ferhat Ceritbinmez, Kunjal Patel, Mst Alpona Akhtar, Sundeep Mukherjee, Erdoğan Kanca & Mustafa Serdar Karakas. (2022) WEDM machining of MoNbTaTiZr refractory high entropy alloy. CIRP Journal of Manufacturing Science and Technology 38, pages 547-559.
Crossref
Shubham Jain & Vishal Parashar. (2022) Comparison of priori and posteriori approach of multi-objective optimization for WEDM on Ti6Al4V alloy. Materials Research Express 9:7, pages 076504.
Crossref
Sana Ehsan, Mudassar Rehman, Mohammad Pervez Mughal, Muhammad Umar Farooq & Muhammad Asad Ali. (2022) Machinability investigations through novel controlled flushing characteristics in wire electric discharge machining of M42 high-speed steel. The International Journal of Advanced Manufacturing Technology 120:1-2, pages 1315-1332.
Crossref
Harsh Nair, A Pramanik, AK Basak, C Prakash, S Debnath, S Shankar & Amit Rai Dixit. (2022) Experimental investigation on material removal rate, kerf width, surface roughness and the dimensional accuracy the accuracy of hole in Inconel 718 using wire electric discharge. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, pages 095440892210960.
Crossref
Ľuboslav Straka & Ivan Čorný. (2022) Identification of geometric errors of circular profiles at WEDM caused by the wire tool electrode vibrations and their reduction with support of acoustic emission method. Engineering Failure Analysis 134, pages 106040.
Crossref
Ebrahim Hosseini, Shafiqur Rehman & Ashkan Alimoradi. (2021) Surface integrity of fatigue strength of nickel based super alloy in turning by wire electrical discharge process. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 236:3, pages 135-145.
Crossref
P. Bharathi, G. Srinivasarao & P. Gopalakrishnaiah. (2021) Multi-objective optimization in wire electric discharge machining of Ti–6AL–4v using grey relational analysis for square and circular profiles. International Journal of Modeling, Simulation, and Scientific Computing 13:01.
Crossref
Dwaipayan De, Titas Nandi & Asish Bandyopadhyay. (2022) Parametric study using response surface methodology of Ti-Al2O3 (15 vol% of Ti taken as Al2O3 reinforced as alumina fibre into titanium matrix) composite material while undergoing WEDM process. Materials Today: Proceedings 59, pages A36-A44.
Crossref
Sachin Ashok Sonawane & Sandeep Sitaram Wangikar. (2022) Multi-superiority response optimization of WEDM for titanium grade-5 using PCA based TOPSIS theory. Materials Today: Proceedings 62, pages 841-847.
Crossref
Anish Nair, Kumanan S & Shanavas K P. (2022) Multi-performance optimization in wire EDM of Inconel 617 using GRA and genetic algorithm. Materials Today: Proceedings 50, pages 1354-1366.
Crossref
P. Sreeraj, S. Thirumalai Kumaran, S. Suresh Kumar, M. Uthayakumar & M. Pethuraj. (2022) Application of MCDM based hybrid optimization of WEDM process parameters. Materials Today: Proceedings 50, pages 1186-1192.
Crossref
Ashish Chaudhary, Sachin Sharma & Akarsh Verma. (2022) WEDM machining of heat treated ASSAB ’88 tool steel: A comprehensive experimental analysis. Materials Today: Proceedings 50, pages 946-951.
Crossref
Ashish Chaudhary, Sachin Sharma & Akarsh Verma. (2022) Optimization of WEDM process parameters for machining of heat treated ASSAB ’88 tool steel using Response surface methodology (RSM). Materials Today: Proceedings 50, pages 917-922.
Crossref
Danish Raza, Gautam Kumar, Mohammad Uzair, Muna Kumar Singh, Dawood Sultan & Rahul Kumar. (2022) Development and heat treatment of β-phase titanium alloy for orthopedic application. Materials Today: Proceedings 50, pages 649-654.
Crossref
Harjit Singh, Raman Kumar, Chander Prakash & Sunpreet Singh. (2022) HA-based coating by plasma spray techniques on titanium alloy for orthopedic applications. Materials Today: Proceedings 50, pages 612-628.
Crossref
Rahul Wandra. (2022) Finite element analysis of powder mixed electric discharge machining on Ti-alloy. Materials Today: Proceedings 50, pages 593-599.
Crossref
J. S. Binoj, N. Manikandan, P. Thejasree, D. Palanisamy, A. Sagai Francis Britto, P. Anusha & S. Pavan Kumar. 2022. Recent Advances in Materials and Modern Manufacturing. Recent Advances in Materials and Modern Manufacturing
923
931
.
J. S. Binoj, N. Manikandan, P. Thejasree, P. C. Krishnamachary, Ramesh Raju, P. Sasikala & S. Alisher Basha. 2022. Recent Advances in Materials and Modern Manufacturing. Recent Advances in Materials and Modern Manufacturing
867
874
.
N. Manikandan, K. C. Varaprasad, P. Thejasree, D. Palanisamy, D. Arulkirubakaran, Ramesh Raju & K. Badrinath. 2022. Recent Advances in Materials and Modern Manufacturing. Recent Advances in Materials and Modern Manufacturing
601
612
.
N. Manikandan, J. S. Binoj, P. Thejasree, P. C. Krishnamachary, Ramesh Raju, D. Palanisamy & G. Hari Jhanavi. 2022. Recent Advances in Materials and Modern Manufacturing. Recent Advances in Materials and Modern Manufacturing
523
531
.
N. Manikandan, J. S. Binoj, P. Thejasree, Ramesh Raju, P. C. Krishnamachary, D. Palanisamy & Pateel Rani Lehya. 2022. Recent Advances in Materials and Modern Manufacturing. Recent Advances in Materials and Modern Manufacturing
447
457
.
C. Navya & M. Chandra Sekhara Reddy. 2022. Recent Advances in Materials and Modern Manufacturing. Recent Advances in Materials and Modern Manufacturing
1129
1137
.
J. S. Binoj, P. Thejasree, D. Palanisamy, B. Vishnu Vardhana Naidu, N. Manikandan, Ramesh Raju & M. Manideep. 2022. Recent Advances in Materials and Modern Manufacturing. Recent Advances in Materials and Modern Manufacturing
1085
1093
.
Duc-Nam Nguyen, Ngoc Thoai Tran & Thanh-Phong Dao. 2022. Numerical Modelling and Optimization in Advanced Manufacturing Processes. Numerical Modelling and Optimization in Advanced Manufacturing Processes
37
53
.
Ngoc-Chien Vu, Tat-Tai Truong & Huu-That Nguyen. 2022. Proceedings of the International Conference on Advanced Mechanical Engineering, Automation, and Sustainable Development 2021 (AMAS2021). Proceedings of the International Conference on Advanced Mechanical Engineering, Automation, and Sustainable Development 2021 (AMAS2021)
192
198
.
A. Pramanik, A. K. Basak, C. Prakash, S. Shankar, Shubham Sharma & S. Narendranath. (2021) Recast Layer Formation during Wire Electrical Discharge Machining of Titanium (Ti-Al6-V4) Alloy. Journal of Materials Engineering and Performance 30:12, pages 8926-8935.
Crossref
Te-Ching Hsiao, Ngoc-Chien Vu, Ming-Chang Tsai, Xuan-Phuong Dang & Shyh-Chour Huang. (2020) Modeling and optimization of machining parameters in milling of INCONEL-800 super alloy considering energy, productivity, and quality using nanoparticle suspended lubrication. Measurement and Control 54:5-6, pages 880-894.
Crossref
Ngoc-Chien Vu, Xuan-Phuong Dang & Shyh-Chour Huang. (2020) Multi-objective optimization of hard milling process of AISI H13 in terms of productivity, quality, and cutting energy under nanofluid minimum quantity lubrication condition. Measurement and Control 54:5-6, pages 820-834.
Crossref
Nitin Kumar Gupta, Nalin Somani, Chander Prakash, Ranjit Singh, Arminder Singh Walia, Sunpreet Singh & Catalin Iulian Pruncu. (2021) Revealing the WEDM Process Parameters for the Machining of Pure and Heat-Treated Titanium (Ti-6Al-4V) Alloy. Materials 14:9, pages 2292.
Crossref
I. Vishal Manoj, S. Narendranath & Alokesh Pramanik. (2021) Optimization and Prediction of Machining Responses Using Response Surface Methodology and Adaptive Neural Network by Wire Electric Discharge Machining of Alloy-X. Materials Science Forum 1026, pages 28-38.
Crossref
Manjunath Patel Gowdru Chandrashekarappa, Sandeep Kumar, Jagadish Jagadish, Danil Yurievich Pimenov & Khaled Giasin. (2021) Experimental Analysis and Optimization of EDM Parameters on HcHcr Steel in Context with Different Electrodes and Dielectric Fluids Using Hybrid Taguchi-Based PCA-Utility and CRITIC-Utility Approaches. Metals 11:3, pages 419.
Crossref
Apoorva Shastri, Aniket Nargundkar, Anand J. Kulkarni & Luigi Benedicenti. (2021) Optimization of process parameters for turning of titanium alloy (Grade II) in MQL environment using multi-CI algorithm. SN Applied Sciences 3:2.
Crossref
Jai Prakash, Md. Israr Equbal & Azhar Equbal. (2021) Investigative study on dimensional accuracy of machined cavity formed during EDM of AISI 1035. Materials Today: Proceedings 47, pages 3217-3220.
Crossref
Pouyan Talebizadehsardari, Arameh Eyvazian, Farayi Musharavati, Qasim Zeeshan, Roohollah Babaei Mahani & Tamer A. Sebaey. (2020) Optimization of wire electrical discharge turning process: trade-off between production rate and fatigue life. The International Journal of Advanced Manufacturing Technology 112:3-4, pages 719-730.
Crossref
Guravtar Singh Mann, Lakhwinder Pal Singh, Pramod Kumar & Sunpreet Singh. 2021. Advances in Metrology and Measurement of Engineering Surfaces. Advances in Metrology and Measurement of Engineering Surfaces
187
198
.
Munish Gupta, Jodh Singh, Harmesh Kumar & Rajesh Kumar. 2021. Advances in Metrology and Measurement of Engineering Surfaces. Advances in Metrology and Measurement of Engineering Surfaces
161
169
.
Duc-Nam Nguyen, Van-Minh Pham, Thanh-Danh Lam & Truong-Giang Nguyen. 2021. Proceedings of the 2nd Annual International Conference on Material, Machines and Methods for Sustainable Development (MMMS2020). Proceedings of the 2nd Annual International Conference on Material, Machines and Methods for Sustainable Development (MMMS2020)
61
69
.
Muhammad Umar Farooq, Muhammad Asad Ali, Yong He, Aqib Mashood Khan, Catalin Iulin Pruncu, Muhammad Kashif, Naveed Ahmed & Noman Asif. (2020) Curved profiles machining of Ti6Al4V alloy through WEDM: investigations on geometrical errors. Journal of Materials Research and Technology 9:6, pages 16186-16201.
Crossref
Harminder Singh Saggu & Amardeep Singh Kang. (2020) WITHDRAWN: Experimental investigation on the surface hardness and tribological properties of c-BN diffused D2 steel. Materials Today: Proceedings.
Crossref
Deepak Kumar. (2020) Bio-mechanical characterization of Mg-composite implant developed by spark plasma sintering technique. Materials Today: Proceedings.
Crossref
Duc-Nam Nguyen, Thanh-Phong Dao, Chander Prakash, Sunpreet Singh, Alokesh Pramanik, Grzegorz Krolczyk & Catalin I. Pruncu. (2020) Machining parameter optimization in shear thickening polishing of gear surfaces. Journal of Materials Research and Technology 9:3, pages 5112-5126.
Crossref
Harjit Singh, Sunpreet Singh & Chander Prakash. (2020) Experimental investigation and parametric optimization of HA-TiO2 plasma spray coating on β-phase titanium alloy. Materials Today: Proceedings 28, pages 1340-1344.
Crossref
Suresh Gudipudi, Selvaraj Nagamuthu, Taraka Sarath Chandra Dongari, Kanmani Subbu Subbian & Surya Prakasa Rao Chilakalapalli. 2020. Advances in Materials Processing. Advances in Materials Processing
243
255
.
Marina Volosova, Anna Okunkova, Pavel Peretyagin, Yury A. Melnik & Natalya Kapustina. (2019) On Electrical Discharge Machining of Non-Conductive Ceramics: A Review. Technologies 7:3, pages 55.
Crossref
B. S. Nishanth, Vinayak N. Kulkarni & V. N. Gaitonde. A review on conventional and non-conventional machining of titanium and nickel based alloys. A review on conventional and non-conventional machining of titanium and nickel based alloys.