https://orcid.org/0000-0002-5017-8945
Citations (32)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (6)
L. Selvarajan, R. Rajavel, Mohammed Yunus & Rami Alfattani. (2023) Die-sinking and rotary EDM surface and subsurface analysis of MoSi2-SiC ceramic composites. Materials Science and Technology 39:18, pages 3150-3166.
Read now
Read now
Kashif Ishfaq, Muhammad Umair Waseem & Muhammad Sana. (2022) Investigating cryogenically treated electrodes’ performance under modified dielectric(s) for EDM of Inconel(617). Materials and Manufacturing Processes 37:16, pages 1902-1911.
Read now
Read now
Anuj Vats, Akshay Dvivedi & Pradeep Kumar. (2022) Investigation of hole roundness-error using different electrolytes in STED process. Materials and Manufacturing Processes 37:12, pages 1405-1421.
Read now
Read now
H. R. Rezaei Ashtiani & F. Hojati. (2022) The influences of spark energy density on the electrical discharge machining (EDM). Advances in Materials and Processing Technologies 8:3, pages 3165-3181.
Read now
Read now
Hreetabh Kishore, Chandrakant K. Nirala, Anupam Agrawal & Basil Kuriachen. (2021) Assessment of process parameters and performance enhancement through a novel suction flushing technology in RµEDM. Materials and Manufacturing Processes 36:13, pages 1476-1488.
Read now
Read now
Ramver Singh, Akshay Dvivedi & Pradeep Kumar. (2020) EDM of high aspect ratio micro-holes on Ti-6Al-4V alloy by synchronizing energy interactions. Materials and Manufacturing Processes 35:11, pages 1188-1203.
Read now
Read now
Articles from other publishers (26)
Kashif Ishfaq, Muhammad Sana, Muhammad Umair Waseem, Muhammad Arif Mahmood & Saqib Anwar. (2023) Mathematical modeling and experimental evaluation of superalloy EDM using cryogenically treated electrodes and transformer oil-based dielectrics: a correlation study. The International Journal of Advanced Manufacturing Technology 129:3-4, pages 1649-1663.
Crossref
Crossref
Kashif Ishfaq, Muhammad Sana, Waqar Muhammad Ashraf & Vivek Dua. (2023) Sustainable EDM of Inconel 600 in Cu-mixed biodegradable dielectrics: Modelling and optimizing the process by artificial neural network for supporting net-zero from industry. Journal of Cleaner Production 421, pages 138388.
Crossref
Crossref
Giuseppe Pellegrini & Chiara Ravasio. (2023) Study of the Law Motion of the Micro-EDM Drilling Process. Journal of Manufacturing and Materials Processing 7:5, pages 165.
Crossref
Crossref
Kashif Ishfaq, Muhammad Sana, Muhammad Umair Waseem, Waqar Muhammad Ashraf, Saqib Anwar & Jaroslaw Krzywanski. (2023) Enhancing EDM Machining Precision through Deep Cryogenically Treated Electrodes and ANN Modelling Approach. Micromachines 14:8, pages 1536.
Crossref
Crossref
Karthick M.P.G, A. Raja Annamalai, Chinmaya P. Mohanty & Alok Singh Chauhan. (2023) Small hole fabrication through additively manufactured CuCr1Zr electrode during EDM of a novel Haynes 25 superalloy. Journal of Materials Research and Technology 25, pages 1981-2000.
Crossref
Crossref
Kashif Ishfaq, Muhammad Sana, Muhammad Umair Waseem, Saqib Anwar, Abdullah Yahia Alfaify & Abdul Wasy Zia. (2023) Surface quality investigation in surfactant-based EDM of Inconel 617 using deep cryogenically treated electrodes. The International Journal of Advanced Manufacturing Technology 127:1-2, pages 861-878.
Crossref
Crossref
Lu Liao, Yongbin Zhang & Yue Dai. (2023) Design of VHF micro-EDM discharge state detection method based on energy coupling detection. The International Journal of Advanced Manufacturing Technology 127:3-4, pages 1275-1291.
Crossref
Crossref
Kashif Ishfaq, Muhammad Sana, Muhammad Arif Mahmood, Saqib Anwar & Muhammad Umair Waseem. (2023) Evaluating Surface Quality of Inconel 617 by Employing Deep Cryogenically Treated Electrodes in Surfactant-Added Dielectrics of Transformer Oil. Metals 13:6, pages 1092.
Crossref
Crossref
Yanyan Chen, Shunchang Hu, Ansheng Li, Yang Cao, Yangjing Zhao & Wuyi Ming. (2023) Parameters Optimization of Electrical Discharge Machining Process Using Swarm Intelligence: A Review. Metals 13:5, pages 839.
Crossref
Crossref
Kashif Ishfaq, Muhammad Sana, Mudassar Rehman, Saqib Anwar, Abdullah Yahia Alfaify & Abdul Wasy Zia. (2023) Role of biodegradable dielectrics toward tool wear and dimensional accuracy in Cu-mixed die sinking EDM of Inconel 600 for sustainable machining. Journal of the Brazilian Society of Mechanical Sciences and Engineering 45:4.
Crossref
Crossref
Thella Babu Rao. (2022) Prediction of EDMed micro-hole quality characteristics using hybrid bio-inspired machine learning-based predictive approaches. International Journal on Interactive Design and Manufacturing (IJIDeM) 17:2, pages 747-764.
Crossref
Crossref
L. Selvarajan, R. Rajavel, K. Venkataramanan & V.P. Srinivasan. (2023) Experimental investigation on surface morphology and recasting layer of Si3N4-TiN composites machined by die-sinking and rotary EDM. Ceramics International 49:5, pages 8487-8501.
Crossref
Crossref
Nitin Kumar Sahu, Mukesh Kumar Singh, Atul Kumar Sahu & Anoop Kumar Sahu. (2023) Employment of cylindrical electrolytic copper grade electrode under EDMed Inconel 825 super alloy: emphasis on machining behavior accompanied with surface topography for sustainability. The International Journal of Advanced Manufacturing Technology.
Crossref
Crossref
S. Balaji, C. Sivakandhan, P. Maniarasan, D. Deepak, K. Senthamarai & S.V. Alagarsamy. (2023) Effect of process parameters on machining behaviour using S/N ratio and ANOVA analysis. Materials Today: Proceedings 74, pages 97-104.
Crossref
Crossref
Yicong Qiu. 2023. Recent Advances in Applied Mechanics and Mechanical Engineering. Recent Advances in Applied Mechanics and Mechanical Engineering
373
387
.
Ali KALYON. (2022) TAGUCHI METHOD FOR OPTIMIZING TOOL WEAR RATE AND OVERCUT IN ELECTRO DISCHARGE MACHININGELEKTRO EROZYON İLE İŞLEMEDE TAKIM AŞINMA ORANININ VE YANAL AÇIKLIĞIN TAGUCHI YÖNTEMİ İLE OPTİMİZASYONU. Adıyaman Üniversitesi Mühendislik Bilimleri Dergisi 9:18, pages 471-480.
Crossref
Crossref
H Boumaza, S Belhadi, M A Yallese, K Safi & A Haddad. (2022) Optimization of surface roughness, tool wear and material removal rate in turning of Inconel 718 with ceramic composite tools using MCDM methods based on Taguchi methodology. Sādhanā 48:1.
Crossref
Crossref
NITIN KUMAR SAHU, MUKESH KUMAR SINGH, ATUL KUMAR SAHU & ANOOP KUMAR SAHU. (2022) SURFACE TOPOGRAPHY AND OPTIMAL MACHINING CHARACTERISTICS INVESTIGATION FOR ADVANCED ENGINEERING MATERIAL INCONEL 825 ALLOY EXPLORING STATISTICAL TGRA ACCOMPANIED WITH T-TOPSIS METHODOLOGY. Surface Review and Letters 29:11.
Crossref
Crossref
Ashish Goyal, Deepesh Sharma, Arnab Bhowmick & Vimal Kumar Pathak. (2022) Multi-objective optimization and characterization of cylindricity and material removal rate in nanographene mixed dielectric EDM using ANFIS and MOSOA. Sādhanā 47:3.
Crossref
Crossref
G. Karthik Pandiyan, T. Prabaharan, D. Jafrey Daniel James & Vinothkumar Sivalingam. (2022) Machinability Analysis and Optimization of Electrical Discharge Machining in AA6061-T6/15wt.% SiC Composite by the Multi-criteria Decision-Making Approach. Journal of Materials Engineering and Performance 31:5, pages 3741-3752.
Crossref
Crossref
Harsh Nair, A Pramanik, AK Basak, C Prakash, S Debnath, S Shankar & Amit Rai Dixit. (2022) Experimental investigation on material removal rate, kerf width, surface roughness and the dimensional accuracy the accuracy of hole in Inconel 718 using wire electric discharge. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, pages 095440892210960.
Crossref
Crossref
Prabina Kumar Patnaik, Srimant Kumar Mishra, P T R Swain, Abhilash Purohit, Sambit Kumar Parija & Sasank Shekhar Panda. (2022) Multi-Objective optimization and experimental analysis of Electro-Discharge Machining parameters via Gray-Taguchi, TOPSIS-Taguchi and PSI-Taguchi methods. Materials Today: Proceedings 62, pages 6189-6198.
Crossref
Crossref
Ranjit Singh, Ravi Pratap Singh & Rajeev Trehan. (2020) State of the art in processing of shape memory alloys with electrical discharge machining: A review. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 235:3, pages 333-366.
Crossref
Crossref
Rajiv Kumar Yadav, Kumar Abhishek, Siba Sankar Mahapatra & Goutam Nandi. (2021) A study on machinability aspects and parametric optimization of Inconel 825 using Rao1, Rao2, Rao3 approach. Materials Today: Proceedings 47, pages 2784-2789.
Crossref
Crossref
Pouyan Talebizadehsardari, Arameh Eyvazian, Farayi Musharavati, Qasim Zeeshan, Roohollah Babaei Mahani & Tamer A. Sebaey. (2020) Optimization of wire electrical discharge turning process: trade-off between production rate and fatigue life. The International Journal of Advanced Manufacturing Technology 112:3-4, pages 719-730.
Crossref
Crossref
Kashif Ishfaq, Saqib Anwar, Muhammad Asad Ali, Muhammad Huzaifa Raza, Muhammad Umar Farooq, Shafiq Ahmad, Catalin I. Pruncu, Mustafa Saleh & Bashir Salah. (2020) Optimization of WEDM for precise machining of novel developed Al6061-7.5% SiC squeeze-casted composite. The International Journal of Advanced Manufacturing Technology 111:7-8, pages 2031-2049.
Crossref
Crossref