Citations (37)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (10)
Sheng Liu, Ge Wan, Xiaokun Shen, Xian Li, Yuxin Peng, Chuansong Xia, Yifan Zhao, Xinbin Hu & Wei Long. (2023) The microstructure and mechanical properties of aluminum/steel welded joint by FSLW. Materials Science and Technology 39:16, pages 2491-2500.
Read now
Read now
Gulvir Singh & Pradeep K. Singh. (2023) Hot profiled rolling of C40 steel: production variable’s effect on rolling performance. Materials and Manufacturing Processes 0:0, pages 1-21.
Read now
Read now
Yogesh Dewang & Vipin Sharma. (2023) Sheet metal shrink flanging process: a critical review of current scenario and future prospects. Materials and Manufacturing Processes 38:6, pages 629-658.
Read now
Read now
Gulvir Singh & Pradeep K. Singh. (2023) Modelling and Optimization of Process Parameters during Grooved Hot Rolling of SAE 1020 Steel. Materials and Manufacturing Processes 38:6, pages 701-721.
Read now
Read now
Gulvir Singh & Pradeep K. Singh. (2023) Effect of process parameters on performance of grooved hot rolling of SAE 4340 steel bars. Materials and Manufacturing Processes 38:2, pages 206-219.
Read now
Read now
Sandeep Pandre, Nitin Kotkunde, Ayush Morchhale, Swadesh Kumar Singh & Ambuj Saxena. (2022) Comparative study of formability characteristics in deep drawing of DP 590 steel using analytical models. Advances in Materials and Processing Technologies 8:sup3, pages 1730-1740.
Read now
Read now
Pankaj Wankhede, Mahesh K, Suresh Kurra & Swadesh Kumar Singh. (2022) Heat treatment and temperature effects on formability of AA2014-T6 in incremental forming. Materials and Manufacturing Processes 37:12, pages 1384-1392.
Read now
Read now
Bhargava Marrapu. (2022) Effect of localization criteria and yield criteria in predicting the forming limit diagram (FLD) of DP590 steel sheets. Advances in Materials and Processing Technologies 8:2, pages 1739-1752.
Read now
Read now
Pranjal Shukla, Konark Joshi, Utkarsh Rastogi, Nitin Kotkunde, Swadesh Kumar Singh & Ambuj Saxena. (2022) Conceptualisation of biaxial tensile test setup for sheet metal forming application using fuzzy analytical network process. Advances in Materials and Processing Technologies 8:1, pages 291-304.
Read now
Read now
Sandeep Pandre, Ayush Morchhale, Nitin Kotkunde & Suresh Kurra. (2021) Processing of DP590 steel using single point incremental forming for automotive applications. Materials and Manufacturing Processes 36:14, pages 1658-1666.
Read now
Read now
Articles from other publishers (27)
Kanmani Ganesan, Saravanan Sambasivam & Rajesh Ramadass. (2023) Predicting and improving the novel process parameters involved in deep drawing process of Inconel 718 sheet at room temperature using hybrid DNN-SSO approach. The Journal of Strain Analysis for Engineering Design 58:8, pages 633-648.
Crossref
Crossref
Wenqiu Yao, Chunjing Wu & Jingtao Han. (2023) Numerical Simulation and Experimental Study of Cold and Hot Composite Forming of Sharp-Edged High-Strength Steel Sections. Materials 16:21, pages 6993.
Crossref
Crossref
Wenqiu Yao, Jingtao Han, Chunjing Wu & Zhongqian Cao. (2023) Effect of Cold and Hot Compounds Forming on Microstructures and Mechanical Properties in the Deformation Zone of Sharp-Edged High-Strength Steel Sections. Materials 16:17, pages 6001.
Crossref
Crossref
Phaneendra Babu Bobba, Sai Surya Vidul Chinthamaneni, Vedavyas Manjunath D, Ahmed Hussein Alkhayyat & Divya Pandey. (2023) Design of Wireless Power Transfer System for PMBLDC Motor driven Autonomous Vehicle. E3S Web of Conferences 391, pages 01188.
Crossref
Crossref
Kosaraju Satyanarayana, Dharavath Baloji, Borrolla Siddartha Reddy, Kuduru Rahul, Mada Gowtham Sai, Murahari Kolli, M. Abdulfadhil Gatea & Harish Dutt Sharma. (2023) Tensile And Formability Studies on AISI310 Austenitic Stainless Steel. E3S Web of Conferences 391, pages 01033.
Crossref
Crossref
Kosaraju Satyanarayana, Vadla Tharun Kumar, Ravi Rathod, MD Shafi, Shankara Chary, Ahmed Alkhayyat & Manisha Khanduja. (2023) Optimization Of Machining Parameters of CNC Milling Operation for Material Removal Rate and Surface Roughness on En-24 Steel Using Taguchi Method. E3S Web of Conferences 391, pages 01011.
Crossref
Crossref
Kosaraju Satyanarayana, Kuraku Ratna Babu, Dharavath Baloji, Sriramoji Vilas Chary, Chintha Pranay Kumar, Dodda Yaswanth Chowdary, M. Abdulfadhil Gatea & Ishteyaaq Ahmad. (2023) Experimental And Finite Element Studies of Stretch Forming Process for AA2014 Alloy At Elevated Temperature. E3S Web of Conferences 391, pages 01010.
Crossref
Crossref
Kosaraju Satyanarayana, Peddi Manoj Kumar, Jangam Shanthi Kumar, Pampari Kalyan, Kumkuma Raj Kiran, Murahari Kolli, M. Abdulfadhil Gatea & Amar Jeet Rawat. (2023) Evaluation of Tensile Properties Using Uni-Axial Testing and Correlation with Microstructure of AA2014 alloy. E3S Web of Conferences 391, pages 01009.
Crossref
Crossref
Appurva Jain, Abhishek Mishra, Vikrant Tiwari, Gurminder Singh, Ravinder Pal Singh & Sunpreet Singh. (2022) Deformation Measurement of a SS304 Stainless Steel Sheet Using Digital Image Correlation Method. Photonics 9:12, pages 912.
Crossref
Crossref
Yu Wang, Zelalem Abathun Mehari, Junyuan Wu & Jingtao Han. (2022) Optimization design of process parameters for cold and hot composite roll forming of the AHSS square tube using response surface methodology. The International Journal of Advanced Manufacturing Technology 123:1-2, pages 527-542.
Crossref
Crossref
Sandeep Pandre, Nitin Kotkunde, Kurra Suresh & Swadesh Kumar Singh. (2022) Investigation of fracture forming limits of dual phase steel under warm incremental forming process. International Journal on Interactive Design and Manufacturing (IJIDeM).
Crossref
Crossref
Sandeep Pandre, Ayush Morchhale, Nitin Kotkunde, Kurra Suresh & Swadesh Kumar Singh. (2022) Stretch flanging behaviour and microstructural analysis of DP steel using punch stretching and incremental forming processes. Archives of Civil and Mechanical Engineering 22:4.
Crossref
Crossref
Zelalem Abathun Mehari & Jingtao Han. (2022) Numerical prediction of ductile fracture during the partial heating roll forming process of DP980. International Journal of Fracture 234:1-2, pages 97-112.
Crossref
Crossref
Baohong Zhang, Shengpeng Ning, Zeng Wei, Yali Duan, Xubin Li & Yongbiao Yang. (2022) Simulation and Experimental Study on Roll-Forming Limit of Cup. Materials 15:4, pages 1279.
Crossref
Crossref
Sandeep Pandre, Ayush Morchhale, Nitin Kotkunde, Swadesh Kumar Singh, Navneet Khanna & Ambuj Saxena. 2022. Computational Intelligence in Manufacturing. Computational Intelligence in Manufacturing
47
70
.
Sandeep Pandre, Ayush Morchhale, Nitin Kotkunde, Swadesh Kumar Singh, Navneet Khanna & Ambuj Saxena. (2021) Determination of Warm Deep Drawing Behavior of DP590 Steel Using Numerical Modeling and Experimental Process Window. Arabian Journal for Science and Engineering 46:12, pages 12537-12548.
Crossref
Crossref
K. Seshacharyulu, Gauri Mahalle, Nitin Kotkunde, Swadesh Kumar Singh & B. Balu Naik. (2021) High temperatures deformation and formability behavior of DP590 steel: mechanical characterization and modeling. Journal of the Brazilian Society of Mechanical Sciences and Engineering 43:10.
Crossref
Crossref
Ayush MORCHHALE, Anand BADRISH, Nitin KOTKUNDE, Swadesh Kumar SINGH, Navneet KHANNA, Ambuj SAXENA & Chetan NIKHARE. (2021) Prediction of fracture limits of Ni–Cr based alloy under warm forming condition using ductile damage models and numerical method. Transactions of Nonferrous Metals Society of China 31:8, pages 2372-2387.
Crossref
Crossref
Sandeep Pandre, Ayush Morchhale, Nitin Kotkunde, Swadesh Kumar Singh & Sujith Ravindran. (2021) Prediction of forming limits and microstructural evolution during warm stretch forming of DP590 steel. Archives of Civil and Mechanical Engineering 21:3.
Crossref
Crossref
Sandeep Pandre, Ayush Morchhale, Gauri Mahalle, Nitin Kotkunde, Kurra Suresh & Swadesh Kumar Singh. (2021) Fracture limit analysis of DP590 steel using single point incremental forming: experimental approach, theoretical modeling and microstructural evolution. Archives of Civil and Mechanical Engineering 21:3.
Crossref
Crossref
Mehari Zelalem Abathun, Jingtao Han & Wang Yu. (2021) Effects of manufacturing methods and production routes on residual stresses of rectangular and square hollow steel sections: a review. Archives of Civil and Mechanical Engineering 21:3.
Crossref
Crossref
Zelalem Abathun Mehari, Jingtao Han, Xuefeng Peng & Yu Wang. (2021) Analysis of stress-strain in the partial heating roll forming process of high strength square hollow steel sections. The International Journal of Advanced Manufacturing Technology 115:1-2, pages 563-579.
Crossref
Crossref
Qiang Yu, Jin Liang, Qiu Li & Chengyao Li. (2021) Development of Measurement Equipment and Experimental and Numerical Simulation Studies for Warm Forming Limits of High-Strength Steel. Materials 14:9, pages 2373.
Crossref
Crossref
Ayush Morchhale, Nitin Kotkunde & Swadesh Kumar Singh. (2021) Prediction of Flow Stress and Forming Limits for IN625 at Elevated Temperature Using the Theoretical and Neural Network Approach. Materials Performance and Characterization 10:1, pages 20200153.
Crossref
Crossref
C. Anand Badrish, Ayush Morchhale, Nitin Kotkunde, Swadesh Kumar Singh & Uma Maheshwera Reddy Paturi. (2021) Influence of lubrication on forming limit diagram for Inconel 625 alloy at elevated temperatures. Materials Today: Proceedings 38, pages 2758-2763.
Crossref
Crossref
Ayush Morchhale, Nitin Kotkunde & Swadesh Kumar Singh. (2020) Deep drawing behavior of IN625 alloy under the influence of different process parameters. IOP Conference Series: Materials Science and Engineering 967:1, pages 012090.
Crossref
Crossref
Baloji Dharavath, Ayush Morchhale, Swadesh Kumar Singh, Nitin Kotkunde & M. T. Naik. (2020) Experimental Determination and Theoretical Prediction of Limiting Strains for ASS 316L at Hot Forming Conditions. Journal of Materials Engineering and Performance 29:7, pages 4766-4778.
Crossref
Crossref