https://orcid.org/0000-0001-7820-2874
Citations (10)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (5)
Jinyang Xu, Linfeng Li, Chenyi Jiang & Shaoming Pan. (2023) Study on milling performances of 3Y-TZP ceramics using PCD and PCBN tools. Materials and Manufacturing Processes 38:12, pages 1495-1513.
Read now
Read now
Md Nadeem Alam, Arshad Noor Siddiquee & Zahid A Khan. (2023) Machining of ZrO2 using wire EDM: an experiment based investigation via assisted electrode. Advances in Materials and Processing Technologies 0:0, pages 1-18.
Read now
Read now
Dil Bahar, Akshay Dvivedi & Pradeep Kumar. (2023) On innovative approach in ECDM process by controlling the temperature and stirring rate of the electrolyte. Materials and Manufacturing Processes 0:0, pages 1-19.
Read now
Read now
Deepakkumar Patil, Shrikant Thorat & Mudigonda Sadaiah. (2023) Study of the effect of PCM process parameters on geometry type, Ra, depth of etch, undercut comparing FeCl3 and CuCl2 etchants on Monel 400. Advances in Materials and Processing Technologies 0:0, pages 1-21.
Read now
Read now
Jinyang Xu, Linfeng Li, Ming Chen & J. Paulo Davim. (2022) An experimental investigation on milling features of fully-sintered zirconia ceramics using PCD tools. Materials and Manufacturing Processes 37:3, pages 318-326.
Read now
Read now
Articles from other publishers (5)
Jinguang Du, Jianzhou Su, Junxiao Geng, Liuyang Duan & Wenbin He. (2023) Research advances on primary machining technologies of zirconia ceramics. The International Journal of Advanced Manufacturing Technology.
Crossref
Crossref
Jiali Zhao, Qing Wang, Yazhou Wang, Xiaopan Gao, Xuesong Teng & Yongjie Ma. (2023) Multi-objective Optimization of Non-circular Gear Through Orthogonal Array and Fuzzy Comprehensive Evaluation Method in WEDM. Arabian Journal for Science and Engineering 48:9, pages 11973-11988.
Crossref
Crossref
Hamid Haghshenas Gorgani, Ali Jahazi, Alireza Jahantigh Pak & Sharif Shabani. (2022) A hybrid algorithm for adjusting the input parameters of the wirecut EDM machine in order to obtain maximum customer satisfaction. SN Applied Sciences 5:1.
Crossref
Crossref
Anna A. Okunkova, Marina A. Volosova, Khaled Hamdy & Khasan I. Gkhashim. (2022) Electrical Discharge Machining of Alumina Using Cu-Ag and Cu Mono- and Multi-Layer Coatings and ZnO Powder-Mixed Water Medium. Technologies 11:1, pages 6.
Crossref
Crossref
Sergey N. Grigoriev, Anna A. Okunkova, Marina A. Volosova, Khaled Hamdy & Alexander S. Metel. (2022) Electrical Discharge Machining of Al2O3 Using Copper Tape and TiO2 Powder-Mixed Water Medium. Technologies 10:6, pages 116.
Crossref
Crossref