Advanced search
Publication Cover
Machining Science and Technology
An International Journal
Volume 15, 2011 - Issue 1
Submit an article Journal homepage
2,705
Views
94
CrossRef citations to date
0
Altmetric
Original Articles

3D FINITE ELEMENT MODELLING OF CHIP FORMATION PROCESS FOR MACHINING INCONEL 718: COMPARISON OF FE SOFTWARE PREDICTIONS

T. Ozel Manufacturing Automation Laboratory, Department of Industrial and Systems Engineering, Rutgers University, Piscataway, New Jersey, USA
,
I. Llanos Faculty of Engineering, Mondragon University, Spain
,
J. Soriano Faculty of Engineering, Mondragon University, Spain
&
P.-J. Arrazola Faculty of Engineering, Mondragon University, SpainCorrespondence[email protected]
Pages 21-46 | Published online: 18 Mar 2011

Citations (94)

Keep up to date with the latest research on this topic with citation updates for this article.

Subscribe to citation updates

Read on this site (9)

Joyson Selvakumar S & Samuel Raj. D. (2024) Machinability analysis during finish turning Ti6Al4V with varying cutting edge radius. Materials and Manufacturing Processes 39:1, pages 144-160.
Read now
Wenyu Cheng, Jose Outeiro, Jean-Philippe Costes, Habib Karouni, Theo Dorlin & Rachid M’Saoubi. (2023) 3D modeling of turning of Ti-6Al-4V titanium alloy using a constitutive model considering the state of stress. Machining Science and Technology 27:4, pages 422-451.
Read now
K. S. Prasad, S. K. Panda, S. K. Kar, S. V. S. N. Murty & S. C. Sharma. (2022) Constitutive modelling and formability prediction of Inconel-718 sheet at elevated temperatures for space applications. Advances in Materials and Processing Technologies 8:1, pages 518-541.
Read now
Bikash Chandra Behera, Chetan, Sudarsan Ghosh & Venkateswara Rao Paruchuri. (2019) Study of saw-tooth chip in machining of Inconel 718 by metallographic technique. Machining Science and Technology 23:3, pages 431-454.
Read now
Farshid Jafarian, Soroush Masoudi, Hamid Soleimani & Domenico Umbrello. (2018) Experimental and numerical investigation of thermal loads in Inocnel 718 machining. Materials and Manufacturing Processes 33:9, pages 1020-1029.
Read now
M. Agmell, A. Ahadi, J. M. Zhou, R. L. Peng, V. Bushlya & J.-E. Ståhl. (2017) Modeling subsurface deformation induced by machining of Inconel 718. Machining Science and Technology 21:1, pages 103-120.
Read now
Lefi Abdellaoui & Wassila Bouzid. (2016) Thermomechanical approach for the modeling of oblique machining with a single cutting edge. Machining Science and Technology 20:4, pages 655-680.
Read now
Lefi Abdellaoui & Wassila Bouzid. (2016) Thermomechanical modeling of oblique turning in relation to tool-nose radius. Machining Science and Technology 20:4, pages 586-614.
Read now
İrfan Ucun, Kubilay Aslantas & Fevzi Bedir. (2016) Finite element modeling of micro-milling: Numerical simulation and experimental validation. Machining Science and Technology 20:1, pages 148-172.
Read now

Articles from other publishers (85)

Qiang Gong, Ming Cai, Yadong Gong, Tao Zhu, Xingjun Gao & Minglei Zhang. (2024) Grinding subsurface damage mechanism of nickel-based single crystal superalloy based on stress-strain. Precision Engineering 86, pages 1-15.
Crossref
Xinyu Cang, Linsen Shu, Peiyou Li, Jun Zhou, Ning Hu & Helong Yu. (2023) Establishment and experimental verification of a three-dimensional finite element model for residual stress in surface processing of Inconel 718 alloy by laser cladding. Materials Today Communications 37, pages 107088.
Crossref
Ruslan Kuliiev, Sören Keller & Nikolai Kashaev. (2023) Identification of Johnson-Cook material model parameters for laser shock peening process simulation for AA2024, Ti–6Al–4V and Inconel 718. Journal of Materials Research and Technology.
Crossref
Stefano Dolci, Kelly S. Carney, Paul Du Bois, Duane Revilock, Charles Ruggeri & Cing-Dao Kan. (2023) Novel method in the modeling of adiabatic shear bands in ballistic impact: An application on Inconel 718 alloy. International Journal of Impact Engineering 182, pages 104763.
Crossref
Anand Krishnan N, Vipindas K & Jose Mathew. (2023) Modelling and experimental analysis of exit burr height and studies on size effect during micro endmilling on Inconel 718. CIRP Journal of Manufacturing Science and Technology 46, pages 135-147.
Crossref
Ailing Shu, Jinhua Zhou, Junxue Ren & Zongyuan Wang. (2023) A modified constitutive model considering dynamic recrystallization behavior for cutting Inconel 718. Journal of Manufacturing Processes 104, pages 189-204.
Crossref
Mohammadreza Fazlali & Xiaoliang Jin. (2023) Time-Varying Tool-Chip Contact in the Cutting Mechanics of Shear Localization. Journal of Manufacturing Science and Engineering 145:9.
Crossref
Chengbo Li & Shunqing Chen. (2023) The effect of chipbreaker parameters on the cutting temperature of Inconel 718 alloy based on the secondary development of Abaqus. Journal of Physics: Conference Series 2541:1, pages 012043.
Crossref
David Hajdu, Asier Astarloa, Istvan Kovacs & Zoltan Dombovari. (2023) The curved uncut chip thickness model: A general geometric model for mechanistic cutting force predictions. International Journal of Machine Tools and Manufacture 188, pages 104019.
Crossref
Ivana Dumanić, Sonja Jozić, Petra Bagavac & Dražen Bajić. (2023) Orthogonal cutting simulation of EN AW 6082 T6 alloy using a coupled Eulerian-Lagrangian approach. Heliyon 9:4, pages e14821.
Crossref
F. Matos, T.E.F. Silva, F. Marques, D. Figueiredo, P.A.R. Rosa & A.M.P. de Jesus. (2023) Machinability assessment of Inconel 718 turning using PCBN cutting tools. Procedia CIRP 117, pages 468-473.
Crossref
P. Albertelli, M. Strano & M. Monno. (2023) Simulation of the effects of cryogenic liquid nitrogen jets in Ti6Al4V milling. Journal of Manufacturing Processes 85, pages 323-344.
Crossref
Yang Liu, Jian Weng, Rachid M'saoubi, Aylin Ahadi & Jinming Zhou. (2023) Evolution of residual stress when turning a fillet radius in stainless steel. Journal of Manufacturing Processes 85, pages 216-226.
Crossref
Oleksandr Gnytko & Anna Kuznetsova. 2023. Advances in Design, Simulation and Manufacturing VI. Advances in Design, Simulation and Manufacturing VI 238 250 .
Yuhua Shi, Jianming Zheng, Pei Feng, Peng Shang, Chi Liu, Ting Chen & Shijie Shan. (2022) BTA Deep Hole Vibration Drilling for Nickel-Based Alloys: Cooling Patterns and Cutter Tooth Wear Mechanisms. Materials 15:22, pages 8178.
Crossref
Muhammad N. Nawaz, Sohaib Z. Khan, Muhammad Asif, Abdulrahman Aljabri, Asad A. Zaidi & Essam R. I. Mahmoud. (2022) Comparison of Machining Simulations of Aerospace Alloy Al6061-T6 Using Lagrangian and Smoothed Particle Hydrodynamics Techniques. Lubricants 10:11, pages 310.
Crossref
Melesse Workneh Wakjira & Perumalla Janaki Ramulu. (2022) Analysis of turning chip morphology with various tool geometries using finite element modeling and simulation to optimize product sustainability. Advances in Mechanical Engineering 14:11, pages 168781322211364.
Crossref
S. Melkote, S. Liang, T. Özel, I. S. Jawahir, D. A. Stephenson & B. Wang. (2022) 100th Anniversary Issue of the Manufacturing Engineering Division Paper A Review of Advances in Modeling of Conventional Machining Processes: From Merchant to the Present . Journal of Manufacturing Science and Engineering 144:11.
Crossref
Mohammadreza Fazlali, Mauricio Ponga & Xiaoliang Jin. (2022) Predictive model of chip segmentation in machining of high-strength metallic alloys. Journal of Materials Processing Technology 308, pages 117723.
Crossref
Maria Aurrekoetxea, Iñigo Llanos, Oier Zelaieta & Luis Norberto López de Lacalle. (2022) Towards advanced prediction and control of machining distortion: a comprehensive review. The International Journal of Advanced Manufacturing Technology 122:7-8, pages 2823-2848.
Crossref
Amir Mir, Xichun Luo, Iñigo Llavori, Anish Roy, Danka Labus Zlatanovic, Shrikrishna N. Joshi & Saurav Goel. (2022) Challenges and issues in continuum modelling of tribology, wear, cutting and other processes involving high-strain rate plastic deformation of metals. Journal of the Mechanical Behavior of Biomedical Materials 130, pages 105185.
Crossref
Hongguang Liu, Xiang Xu, Jun Zhang, Zhechao Liu, Yong He, Wanhua Zhao & Zhanqiang Liu. (2022) The state of the art for numerical simulations of the effect of the microstructure and its evolution in the metal-cutting processes. International Journal of Machine Tools and Manufacture 177, pages 103890.
Crossref
Dongdong Xu, Yang Liu, Liang Ding, Jinming Zhou, Rachid M'Saoubi & Haijiang Liu. (2022) Experimental and numerical investigation of Inconel 718 machining with worn tools. Journal of Manufacturing Processes 77, pages 163-173.
Crossref
Khalaf Nasralla, Suha K. Shihab, Adel K. Mahmoud & Jabbar Gattmah. (2021) Estimation of induced residual stresses and corrosion behavior of machined Inconel 718 superalloy: 3D-FE simulation and optimization. International Journal of Computational Materials Science and Engineering 11:01.
Crossref
Peng Li & Zhiyong Chang. (2022) Numerical Modeling of the Effect of Cutting-Edge Radius on Cutting Force and Stress Concentration during Machining. Micromachines 13:2, pages 211.
Crossref
Pengfei Tian, Lin He, Tao Zhou, Feilong Du, Zichuan Zou, Xiaorong Zhou & Hongwan Jiang. (2022) Reverse identification of constitutive parameters of Inconel 718 alloy based on analytical model and thermo-mechanical loads analysis of machined surface. Journal of Materials Research and Technology 16, pages 1353-1370.
Crossref
Junli Li, Ziru Huang, Gang Liu, Qinglong An & Ming Chen. (2021) An experimental and finite element investigation of chip separation criteria in metal cutting process. The International Journal of Advanced Manufacturing Technology 116:11-12, pages 3877-3889.
Crossref
Chun Liu, Min Wan & Yun Yang. (2021) Simulation of the chip morphology together with its evolution in machining of Inconel 718 by considering widely spread cutting speed. The International Journal of Advanced Manufacturing Technology 116:1-2, pages 175-195.
Crossref
Oğur İynen, Abdul Kadir Ekşi, Hamza Kemal Akyıldız & Mustafa Özdemir. (2021) Real 3D turning simulation of materials with cylindrical shapes using ABAQUS/Explicit. Journal of the Brazilian Society of Mechanical Sciences and Engineering 43:8.
Crossref
Chao Zhang & Hongseok Choi. (2021) Study of segmented chip formation in cutting of high-strength lightweight alloys. The International Journal of Advanced Manufacturing Technology 112:9-10, pages 2683-2703.
Crossref
Bentejui Medina-Clavijo, Gorka Ortiz-de-Zarate, Andres Sela, Iñaki M. Arrieta, Aleksandr Fedorets, Pedro J. Arrazola & Andrey Chuvilin. (2021) In-SEM micro-machining reveals the origins of the size effect in the cutting energy. Scientific Reports 11:1.
Crossref
Chi-Jen Lin, Yu-Ting Lui, Yu-Fu Lin, Hsian-Bing Wang, Steven Y. Liang & Jiunn-Jyh Junz Wang. (2021) Prediction of Shearing and Ploughing Constants in Milling of Inconel 718. Journal of Manufacturing and Materials Processing 5:1, pages 8.
Crossref
F.A.V. da Silva & J.C. Outeiro. (2021) Machining simulation of Inconel 718 using Lagrangian and Coupled Eulerian-Lagrangian approaches. Procedia CIRP 102, pages 453-458.
Crossref
Xin Guo, Ling Chen, Wu Zhao, Qirui Du, Kai Zhang & Xiao Hu. (2020) Research on Tool Selection Strategy Based on Multi-method Integration. Research on Tool Selection Strategy Based on Multi-method Integration.
Yang Liu, Mathias Agmell, Dongdong Xu, Aylin Ahadi, Jan-Eric Stahl & Jinming Zhou. (2020) Numerical contribution to segmented chip effect on residual stress distribution in orthogonal cutting of Inconel718. The International Journal of Advanced Manufacturing Technology 109:3-4, pages 993-1005.
Crossref
Padmaja Tripathy & Kalipada Maity. (2020) Cutting forces analysis of micro-milling process on Inconel 718 – a finite element approach. International Journal of Modeling, Simulation, and Scientific Computing 11:02, pages 2050011.
Crossref
Razanica S.Malakizadi A.Larsson R.Cedergren S.Josefson B. L.. (2020) FE modeling and simulation of machining Alloy 718 based on ductile continuum damage. International Journal of Mechanical Sciences 171, pages 105375.
Crossref
Elham Mirkoohi, Hong-Chuong Tran, Yu-Lung Lo, You-Cheng Chang, Hung-Yu Lin & Steven Y. Liang. (2020) Analytical mechanics modeling of residual stress in laser powder bed considering flow hardening and softening. The International Journal of Advanced Manufacturing Technology 107:9-10, pages 4159-4172.
Crossref
Hassan Ijaz, Mohd Danish, Muhammad Asad & Saeed Rubaiee. (2020) A three-dimensional finite element-approach to investigate the optimum cutting parameters in machining AA2024. Mechanics & Industry 21:6, pages 615.
Crossref
Panwei Jiang, Mustafa Rifat & Saurabh Basu. (2020) Impact of Surface Roughness and Porosity on Lattice Structures Fabricated by Additive Manufacturing- A Computational Study. Procedia Manufacturing 48, pages 781-789.
Crossref
Asit Kumar Parida, Kalipada Maity & Sataya Brata Ghadei. (2020) 3D simulation analysis of hot machining of nickel alloy. Materials Today: Proceedings 22, pages 2093-2102.
Crossref
Rahul A. Mali, Mata Dayal Agrahari & T.V.K. Gupta. (2020) FE based simulation and experimental validation of forces in dry turning of aluminium 7075. Materials Today: Proceedings 27, pages 2319-2323.
Crossref
Weihua Xie, Fan Yang, Li Ding & Fabrizio Scarpa. (2019) Predictive models and experiments for high-velocity and high-temperature impacts in Inconel-alloy panels. Materials & Design 182, pages 108032.
Crossref
Farshid Jafarian, Soroush Masoudi, Domenico Umbrello & Luigino Filice. (2019) New strategies for improvement of numerical model accuracy in machining of nickel-based alloy. Simulation Modelling Practice and Theory 94, pages 134-148.
Crossref
Farshid Jafarian. (2019) 3D modeling of recrystallized layer depth and residual stress in dry machining of nickel-based alloy. Journal of the Brazilian Society of Mechanical Sciences and Engineering 41:4.
Crossref
Gorka Ortiz-de-Zarate, Andres Sela, Mikel Saez-de-Buruaga, Mikel Cuesta, Aitor Madariaga, Ainhara Garay & Pedro J. Arrazola. (2018) Methodology to establish a hybrid model for prediction of cutting forces and chip thickness in orthogonal cutting condition close to broaching. The International Journal of Advanced Manufacturing Technology 101:5-8, pages 1357-1374.
Crossref
Jinqiang Ning, Vinh Nguyen & Steven Y. Liang. (2018) Analytical modeling of machining forces of ultra-fine-grained titanium. The International Journal of Advanced Manufacturing Technology 101:1-4, pages 627-636.
Crossref
Asit Kumar Parida & Kalipada Maity. (2019) Numerical and experimental analysis of specific cutting energy in hot turning of Inconel 718. Measurement 133, pages 361-369.
Crossref
Eren Kaya & İrfan Kaya. (2018) A review on machining of NiTi shape memory alloys: the process and post process perspective. The International Journal of Advanced Manufacturing Technology 100:5-8, pages 2045-2087.
Crossref
L. Langenhorst, M. Cihan & J. Sölter. (2019) A Three Dimensional Calculation Approach for the Heat Flux Density Distribution in Face Milling. Procedia CIRP 82, pages 8-13.
Crossref
Asit Kumar Parida & Kalipada Maity. (2018) Numerical analysis of chip geometry on hot machining of nickel base alloy. Journal of the Brazilian Society of Mechanical Sciences and Engineering 40:10.
Crossref
K.S. Prasad, S.K. Panda, S.K. Kar, S.K. Singh, S.V.S.N. Murty & S.C. Sharma. (2018) Effect of Temperature and Deformation Speed on Formability of IN718 Sheets: Experimentation and Modelling. IOP Conference Series: Materials Science and Engineering 418, pages 012055.
Crossref
Dong Min Kim, Do Young Kim & Hyung Wook Park. (2018) The State of the Art in FEM Analysis Technology of the Machining Process. Journal of the Korean Society for Precision Engineering 35:3, pages 269-278.
Crossref
Joshi Ajeet Vasant, G. Gopi, J. John Rozario Jegaraj, K. Ramesh Kumar, P. Kuppan & R. Oyyaravelu. (2018) Finite Element Simulation and Experimental Validation of Laser Assisted Machining of Inconel 718. Materials Today: Proceedings 5:5, pages 13637-13649.
Crossref
K. Venkatesan, Jaymin Kanubhai, Geet Viralkumar Raval & Shah Harsh Vipulkumar. (2018) A Study On Prediction Of Forces And Cutting Temperature In Laser-Assisted Machining Of Inconel 718 Alloy Using Numerical Approach. Materials Today: Proceedings 5:5, pages 12339-12348.
Crossref
Salman Pervaiz, Ibrahim Deiab, Essam Wahba, Amir Rashid & Mihai Nicolescu. (2017) A numerical and experimental study to investigate convective heat transfer and associated cutting temperature distribution in single point turning. The International Journal of Advanced Manufacturing Technology 94:1-4, pages 897-910.
Crossref
Gururaj Bolar & Shrikrishna N. Joshi. 2018. Precision Product-Process Design and Optimization. Precision Product-Process Design and Optimization 99 122 .
Farbod Akhavan Niaki & Laine Mears. (2017) A comprehensive study on the effects of tool wear on surface roughness, dimensional integrity and residual stress in turning IN718 hard-to-machine alloy. Journal of Manufacturing Processes 30, pages 268-280.
Crossref
W. Grzesik, P. Niesłony & P. Laskowski. (2017) Determination of Material Constitutive Laws for Inconel 718 Superalloy Under Different Strain Rates and Working Temperatures. Journal of Materials Engineering and Performance 26:12, pages 5705-5714.
Crossref
F. Ducobu, E. Rivière-Lorphèvre & E. Filippi. (2017) Finite element modelling of 3D orthogonal cutting experimental tests with the Coupled Eulerian-Lagrangian (CEL) formulation. Finite Elements in Analysis and Design 134, pages 27-40.
Crossref
Zhipeng Pan, Yixuan Feng, Yu-Ting Lu, Yu-Fu Lin, Tsung-Pin Hung, Fu-Chuan Hsu & Steven Y. Liang. (2017) Force modeling of Inconel 718 laser-assisted end milling under recrystallization effects. The International Journal of Advanced Manufacturing Technology 92:5-8, pages 2965-2974.
Crossref
Xiaohong Lu, Furui Wang, Zhenyuan Jia, Likun Si, Chi Zhang & Steven Y. Liang. (2017) A modified analytical cutting force prediction model under the tool flank wear effect in micro-milling nickel-based superalloy. The International Journal of Advanced Manufacturing Technology 91:9-12, pages 3709-3716.
Crossref
Xiaohong Lu, FuRui Wang, Zhenyuan Jia, Likun Si & Yongqiang Weng. (2017) Influence of feed per tooth on tool wear based on 3D finite element simulation in micro-milling of Inconel 718. Industrial Lubrication and Tribology 69:4, pages 585-590.
Crossref
Joakim Johansson, Christer Persson, Gabriel Testa, Andrew Ruggiero, Nicola Bonora & Magnus Hörnqvist Colliander. (2017) Effect of microstructure on dynamic shear localisation in Alloy 718. Mechanics of Materials 109, pages 88-100.
Crossref
Asit Kumar Parida & Kalipada Maity. (2017) Effect of nose radius on forces, and process parameters in hot machining of Inconel 718 using finite element analysis. Engineering Science and Technology, an International Journal 20:2, pages 687-693.
Crossref
A. Iturbe, E. Giraud, E. Hormaetxe, A. Garay, G. Germain, K. Ostolaza & P.J. Arrazola. (2017) Mechanical characterization and modelling of Inconel 718 material behavior for machining process assessment. Materials Science and Engineering: A 682, pages 441-453.
Crossref
S. Rajashekhar Reddy, Mechiri Sandeep Kumar & V. Vasu. (2017) Temperature study in Turning Inconel-718: 3D Simulation and Experimentation. Materials Today: Proceedings 4:9, pages 9946-9950.
Crossref
Mechiri Sandeep Kumar, S. Rajashekhar Reddy & V. Vasu. (2017) A 3-D Simulation and Experimental Study of Cutting Forces in Turning Inconel-718. Materials Today: Proceedings 4:9, pages 9942-9945.
Crossref
Farshid Jafarian, Domenico Umbrello & Behzad Jabbaripour. (2016) Identification of new material model for machining simulation of Inconel 718 alloy and the effect of tool edge geometry on microstructure changes. Simulation Modelling Practice and Theory 66, pages 273-284.
Crossref
Amir Malakizadi, Stefan Cedergren, Ibrahim Sadik & Lars Nyborg. (2016) Inverse identification of flow stress in metal cutting process using Response Surface Methodology. Simulation Modelling Practice and Theory 60, pages 40-53.
Crossref
Ali Zahedi & Bahman Azarhoushang. (2016) FEM Based Modeling of Cylindrical Grinding Process Incorporating Wheel Topography Measurement. Procedia CIRP 46, pages 201-204.
Crossref
Jaeick Kim, Seungtae Lee & Changhee Lee. (2015) Investigating the Cause of Hindrance to the Interfacial Bonding of INCONEL 718 Layer Deposited by Kinetic Spray Process. Journal of the Korean institute of surface engineering 48:6, pages 275-282.
Crossref
Salman Pervaiz, Ibrahim Deiab, Amir Rashid & Mihai Nicolescu. (2014) Prediction of energy consumption and environmental implications for turning operation using finite element analysis. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 229:11, pages 1925-1932.
Crossref
Salman Pervaiz, Ibrahim Deiab, Essam Wahba, Amir Rashid & Cornel Mihai Nicolescu. (2015) A novel numerical modeling approach to determine the temperature distribution in the cutting tool using conjugate heat transfer (CHT) analysis. The International Journal of Advanced Manufacturing Technology 80:5-8, pages 1039-1047.
Crossref
Zhenyu Han, Hongyu Jin & Hongya Fu. (2015) Cutting force prediction models of metal machining processes: A review. Cutting force prediction models of metal machining processes: A review.
Jing Zhao, Zhong Hua Du & Jin Ku Zhao. (2014) Study on the Processing Rate Allocation in Forming Process of Cartridge Case. Applied Mechanics and Materials 687-691, pages 519-522.
Crossref
F. Jafarian, M. Imaz Ciaran, D. Umbrello, P.J. Arrazola, L. Filice & H. Amirabadi. (2014) Finite element simulation of machining Inconel 718 alloy including microstructure changes. International Journal of Mechanical Sciences 88, pages 110-121.
Crossref
Farshid Jafarian, Mikel Imaz Ciaran, Pedro José Arrazola, Luigino Filice, Domenico Umbrello & H. Amirabadi. (2014) Effects of the Flow Stress in Finite Element Simulation of Machining Inconel 718 Alloy. Key Engineering Materials 611-612, pages 1210-1216.
Crossref
Jing Zhao, Zhong Hua Du & Jin Ku Zhao. (2014) Analysis on Cupping Process of Cartridge Case without Heat Teatment Based on DEFORM-3D. Advanced Materials Research 912-914, pages 573-576.
Crossref
P.J. Arrazola, A. Kortabarria, A. Madariaga, J.A. Esnaola, E. Fernandez, C. Cappellini, D. Ulutan & T. Özel. (2014) On the machining induced residual stresses in IN718 nickel-based alloy: Experiments and predictions with finite element simulation. Simulation Modelling Practice and Theory 41, pages 87-103.
Crossref
Salman Pervaiz, Ibrahim Deiab, Essam Moustafa Wahba, Amir Rashid & Mihai Nicolescu. (2014) A Coupled FE and CFD Approach to Predict the Cutting Tool Temperature Profile in Machining. Procedia CIRP 17, pages 750-754.
Crossref
Xiangyu Wang, Chuanzhen Huang, Bin Zou, Hanlian Liu, Hongtao Zhu & Jun Wang. (2013) Dynamic behavior and a modified Johnson–Cook constitutive model of Inconel 718 at high strain rate and elevated temperature. Materials Science and Engineering: A 580, pages 385-390.
Crossref
Antonio Del Prete, Luigino Filice & Domenico Umbrello. (2013) Numerical Simulation of Machining Nickel-Based Alloys. Procedia CIRP 8, pages 540-545.
Crossref
P.J. Arrazola, T. Özel, D. Umbrello, M. Davies & I.S. Jawahir. (2013) Recent advances in modelling of metal machining processes. CIRP Annals 62:2, pages 695-718.
Crossref
Domenico Umbrello, Serafino Caruso & Giovanna Rotella. (2012) Hardness-Based Flow Stress for Numerical Simulation of Machining Inconel 718 Alloy. Key Engineering Materials 504-506, pages 1287-1292.
Crossref

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.