Citations (56)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (7)
B Kiran Kumar & V Chittaranjan Das. (2023) Study and optimisation of WEDM parameters of AISI P20+Ni using RSM and hybrid deep neural network. Advances in Materials and Processing Technologies 9:3, pages 1299-1327.
Read now
Read now
Rama Thirumurugan & Clement Christy Deepak C. (2020) Study on the quality and tooth root load carrying capacity of the high contact ratio asymmetrical gear tooth machined using WCEDM process. Materials and Manufacturing Processes 35:12, pages 1352-1361.
Read now
Read now
Hamid Abyar, Amir Abdullah & Abdolhamid Akbarzadeh Shafaroud. (2019) Theoretical and experimental analysis of machining errors on small arced corners during WEDM finishing stages. Machining Science and Technology 23:5, pages 734-757.
Read now
Read now
Anish Kumar, Vinod Kumar & Jatinder Kumar. (2016) Surface crack density and recast layer thickness analysis in WEDM process through response surface methodology. Machining Science and Technology 20:2, pages 201-230.
Read now
Read now
Nikola Gjeldum, Bozenko Bilic & Ivica Veza. (2015) Investigation and modelling of process parameters and workpiece dimensions influence on material removal rate in CWEDT process. International Journal of Computer Integrated Manufacturing 28:7, pages 715-728.
Read now
Read now
Anish Kumar, Vinod Kumar & Jatinder Kumar. (2014) MICROSTRUCTURE ANALYSIS AND MATERIAL TRANSFORMATION OF PURE TITANIUM AND TOOL WEAR SURFACE AFTER WIRE ELECTRIC DISCHARGE MACHINING PROCESS. Machining Science and Technology 18:1, pages 47-77.
Read now
Read now
Palani Sivaprakasam, P. Hariharan & S. Gowri. (2013) Optimization of Micro-WEDM Process of Aluminum Matrix Composite (A413-B4C): A Response Surface Approach. Materials and Manufacturing Processes 28:12, pages 1340-1347.
Read now
Read now
Articles from other publishers (49)
Anshuman Kumar, Chandramani Upadhyay, Ram Subbiah & Dusanapudi Siva Nagaraju. (2023) A hybrid approach for machining optimization of the WEDM using grey-fuzzy with Metaphor-Less algorithms for Ti-3Al-2.5V. World Journal of Engineering.
Crossref
Crossref
Kamal Ukey, Anil Rameshchandra Sahu, Sameer Sheshrao Gajghate, Akhya Kumar Behera, Chinta Limbadri & Himadri Majumder. (2023) Wire electrical discharge machining (WEDM) review on current optimization research trends. Materials Today: Proceedings.
Crossref
Crossref
Thanh-Cong Nguyen, Dung Hoang Tien, Ba-Nghien Nguyen & Quang-Cherng Hsu. (2023) Multi-Response Optimization of Milling Process of Hardened S50C Steel Using SVM-GA Based Method. Metals 13:5, pages 925.
Crossref
Crossref
Tran Huu Danh, Nguyen Hong Linh, Bui Thanh Danh, Tran Minh Tam, Nguyen Huu Quang, Tran Ngoc Giang, Nguyen Manh Cuong & Nguyen Thi Thanh Nga. 2023. Advances in Engineering Research and Application. Advances in Engineering Research and Application
599
606
.
Nguyen Hong Linh, Tran Huu Danh, Bui Thanh Danh, Tran Minh Tam, Nguyen Anh Tuan, Trinh Kieu Tuan, Nguyen Manh Cuong & Nguyen Thi Thanh Nga. 2023. Advances in Engineering Research and Application. Advances in Engineering Research and Application
305
313
.
S. ARULSELVAN, D. RAVINDRAN, G. SELVAKUMAR & A. ARUL MARCEL MOSHI. (2022) STUDY ON THE INFLUENCE OF ZINC-COATED WIRE MATERIAL ON 3D PROFILE MACHINING OF INCONEL 825 ALLOY USING WEDM PROCESS. Surface Review and Letters 29:11.
Crossref
Crossref
NITIN KUMAR SAHU, MUKESH KUMAR SINGH, ATUL KUMAR SAHU & ANOOP KUMAR SAHU. (2022) SURFACE TOPOGRAPHY AND OPTIMAL MACHINING CHARACTERISTICS INVESTIGATION FOR ADVANCED ENGINEERING MATERIAL INCONEL 825 ALLOY EXPLORING STATISTICAL TGRA ACCOMPANIED WITH T-TOPSIS METHODOLOGY. Surface Review and Letters 29:11.
Crossref
Crossref
Ľuboslav Straka, Miroslav Gombár, Alena Vagaská & Patrik Kuchta. (2022) Efficiency Optimization of the Electroerosive Process in µ-WEDM of Steel MS1 Sintered Using DMLS Technology. Micromachines 13:9, pages 1446.
Crossref
Crossref
Maninder Singh & Shankar Singh. (2022) Comparative Capabilities of Conventional and Ultrasonic-Assisted-Electrical Discharge Machining of Nimonic Alloy 75. Journal of Materials Engineering and Performance 31:6, pages 4611-4623.
Crossref
Crossref
Nilesh Ghuge, Sambhaji Sagare, Shyam Pawar, Chirag Kolambe & Dattatray Palande. (2022) Parameter optimization on WEDM machine of oil hardened nickel (Non – Shrinking) steel. Materials Today: Proceedings 65, pages 3150-3160.
Crossref
Crossref
Anish Nair, Kumanan S & Shanavas K P. (2022) Multi-performance optimization in wire EDM of Inconel 617 using GRA and genetic algorithm. Materials Today: Proceedings 50, pages 1354-1366.
Crossref
Crossref
Vinod Kumar, Renu Sharma, Jatinder Kumar, Ravinder Pal Singh & Anish Kumar. 2022. Recent Trends in Materials. Recent Trends in Materials
377
392
.
Abhijit Saha, Pritam Pain & Goutam Kumar Bose. 2022. Nonlinear Dynamics and Applications. Nonlinear Dynamics and Applications
675
683
.
Nguyen Huu Quang, Hoang Xuan Tu, Pham Duc Lam, Le Hoang Anh, Nguyen Anh Tuan, Tran Anh Duc, Tran Ngoc Giang & Nguyen Thanh Tu. 2022. Advances in Engineering Research and Application. Advances in Engineering Research and Application
328
335
.
D. Pritima, P. Gopi Krishnan, P. Padmanabhan & B. Stalin. (2021) Performance of electrical energy based unconventional machining processes – Review. Materials Today: Proceedings.
Crossref
Crossref
Anish Nair & Somasundaram Kumanan. (2021) Evaluation and Optimization of Geometric Deviations in Abrasive Water Jet Profile Cutting of Inconel 617. Journal of Testing and Evaluation 49:1, pages 20200036.
Crossref
Crossref
Shatarupa Biswas, Yogesh Singh & Manidipto Mukherjee. 2021. Intelligent Manufacturing. Intelligent Manufacturing
1
35
.
Sudip Banerjee, Bikash Panja & Soupayan Mitra. (2020) Effect of process parameters on machining EN 47 spring steel through WEDM. Emerging Materials Research 9:3, pages 628-636.
Crossref
Crossref
R Rudrapati, A Bandyopadhyay, P K Pal & L Rathod. (2020) Analysis, modeling and optimization of surface roughness in cylindrical traverse cut grinding using factorial design, RSM and simulated annealing algorithm. IOP Conference Series: Materials Science and Engineering 814:1, pages 012016.
Crossref
Crossref
Harvinder Singh, Vinod Kumar & Jatinder Kapoor. (2020) Modeling of WEDM parameters and surface integrity characteristics in the machining of Nimonic75 alloy. Materials Today: Proceedings 28, pages 1363-1371.
Crossref
Crossref
Manisha Priyadarshini, Ajit Behera, Chandan Kumar Biswas, Biswajit Swain & Swadhin Patel. (2020) Multi-objective optimization of WEDM process by hybrid methodology. Materials Today: Proceedings 33, pages 5511-5513.
Crossref
Crossref
Nor Atiqah Zolpakar, Swati Singh Lodhi, Sunil Pathak & Mohita Anand Sharma. 2020. Optimization of Manufacturing Processes. Optimization of Manufacturing Processes
185
199
.
Rakesh Chaudhari, Jay J. Vora, S. S. Mani Prabu, I. A. Palani, Vivek K. Patel, D. M. Parikh & Luis Norberto López de Lacalle. (2019) Multi-Response Optimization of WEDM Process Parameters for Machining of Superelastic Nitinol Shape-Memory Alloy Using a Heat-Transfer Search Algorithm. Materials 12:8, pages 1277.
Crossref
Crossref
Shiba Narayan Sahu, Sagar Kumar Murmu & Narayan Chandra Nayak. (2019) Multi-objective Optimization of EDM Process with Performance Appraisal of GA based Algorithms in Neural Network Environment. Materials Today: Proceedings 18, pages 3982-3997.
Crossref
Crossref
Krzysztof Jarosz, Piotr Nieslony & Piotr Löschner. 2019. Advances in Manufacturing Engineering and Materials. Advances in Manufacturing Engineering and Materials
333
340
.
Yasir Nawaz, Shahid Maqsood & Khawar Naeem. (2018) Effect of Input Parameters of Wire Electric Discharge Machining on Surface Integrity of DC53 Die Steel. Effect of Input Parameters of Wire Electric Discharge Machining on Surface Integrity of DC53 Die Steel.
Katerina Mouralova, Lenka Klakurkova, Radomil Matousek, Tomas Prokes, Radim Hrdy & Vaclav Kana. (2018) Influence of the cut direction through the semi-finished product on the occurrence of cracks for X210Cr12 steel using WEDM. Archives of Civil and Mechanical Engineering 18:4, pages 1318-1331.
Crossref
Crossref
Manisha Priyadarshini, Chandan Kumar Biswas & Ajit Behera. (2018) Wire Electro Discharge Machining of P20 Tool Steel. Materials Today: Proceedings 5:11, pages 25519-25523.
Crossref
Crossref
L. Selvarajan, D. Katherasan, B. Srivijai, R. Rajavel & M. Ramamoorthi. (2018) Experimental Analysis of EN 19 Alloy Material on EDM for Improving Geometrical Errors Using Copper Pentagon Shaped Electrode. Materials Today: Proceedings 5:2, pages 4508-4514.
Crossref
Crossref
Rahim Jafari, Müge Kahya, Samad Nadimi Bavil Oliaei, Hakkı Özgür Ünver & Tuba Okutucu Özyurt. (2017) Modeling and analysis of surface roughness of microchannels produced by μ-WEDM using an ANN and Taguchi method. Journal of Mechanical Science and Technology 31:11, pages 5447-5457.
Crossref
Crossref
Vinod Kumar, Kamal Kumar Jangra, Vikas Kumar & Neeraj Sharma. (2016) WEDM of nickel based aerospace alloy: optimization of process parameters and modelling. International Journal on Interactive Design and Manufacturing (IJIDeM) 11:4, pages 917-929.
Crossref
Crossref
H. Majumder, T.R. Paul, V. Dey, P. Dutta & A. Saha. (2017) Use of PCA-grey analysis and RSM to model cutting time and surface finish of Inconel 800 during wire electro discharge cutting. Measurement 107, pages 19-30.
Crossref
Crossref
M. Manjaiah, Rudolph F. Laubscher, Anil Kumar & S. Basavarajappa. (2016) Parametric optimization of MRR and surface roughness in wire electro discharge machining (WEDM) of D2 steel using Taguchi-based utility approach. International Journal of Mechanical and Materials Engineering 11:1.
Crossref
Crossref
Abhijit Saha & Subhas Chandra Mondal. (2016) Multi-objective optimization in WEDM process of nanostructured hardfacing materials through hybrid techniques. Measurement 94, pages 46-59.
Crossref
Crossref
Anish Kumar, Vinod Kumar & Jatinder Kumar. (2016) Investigation of Micro-Cracks Susceptibility on Machined Pure Titanium Surface in WEDM Process. Journal for Manufacturing Science and Production 16:2, pages 123-139.
Crossref
Crossref
K. Anand Babu & P. Venkataramaiah. (2015) Multi-response Optimization in Wire Electrical Discharge Machining (WEDM) of Al6061/SiCp Composite Using Hybrid Approach. Journal for Manufacturing Science and Production 15:4, pages 327-338.
Crossref
Crossref
Mantra Prasad Satpathy, Bikash Ranjan Moharana, Shailesh Dewangan & Susanta Kumar Sahoo. (2015) Modeling and optimization of ultrasonic metal welding on dissimilar sheets using fuzzy based genetic algorithm approach. Engineering Science and Technology, an International Journal 18:4, pages 634-647.
Crossref
Crossref
Vivek Aggarwal, Sehijpal Singh Khangura & R. K. Garg. (2015) Parametric modeling and optimization for wire electrical discharge machining of Inconel 718 using response surface methodology. The International Journal of Advanced Manufacturing Technology 79:1-4, pages 31-47.
Crossref
Crossref
Sanket N. Bhavsar, S. Aravindan & P. Venkateswara Rao. (2015) Investigating material removal rate and surface roughness using multi-objective optimization for focused ion beam (FIB) micro-milling of cemented carbide. Precision Engineering 40, pages 131-138.
Crossref
Crossref
A. Varun & Nasina Venkaiah. (2014) Simultaneous optimization of WEDM responses using grey relational analysis coupled with genetic algorithm while machining EN 353. The International Journal of Advanced Manufacturing Technology 76:1-4, pages 675-690.
Crossref
Crossref
P. Sivaprakasam, P. Hariharan & S. Gowri. (2014) Modeling and analysis of micro-WEDM process of titanium alloy (Ti–6Al–4V) using response surface approach. Engineering Science and Technology, an International Journal 17:4, pages 227-235.
Crossref
Crossref
Amitesh Goswami & Jatinder Kumar. (2014) Investigation of surface integrity, material removal rate and wire wear ratio for WEDM of Nimonic 80A alloy using GRA and Taguchi method. Engineering Science and Technology, an International Journal 17:4, pages 173-184.
Crossref
Crossref
Anish Kumar, Vinod Kumar & Jatinder Kumar. (2013) Surface integrity and material transfer investigation of pure titanium for rough cut surface after wire electro discharge machining. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 228:8, pages 880-901.
Crossref
Crossref
Samra Arooj, Masood Shah, Shahid Sadiq, Syed Hussain Imran Jaffery & Shahab Khushnood. (2014) Effect of Current in the EDM Machining of Aluminum 6061 T6 and its Effect on the Surface Morphology. Arabian Journal for Science and Engineering 39:5, pages 4187-4199.
Crossref
Crossref
Danial Ghodsiyeh, Abolfazl Golshan & S. Izman. (2013) Multi-objective process optimization of wire electrical discharge machining based on response surface methodology. Journal of the Brazilian Society of Mechanical Sciences and Engineering 36:2, pages 301-313.
Crossref
Crossref
Anish Kumar, Vinod Kumar & Jatinder Kumar. (2013) Investigation of machining parameters and surface integrity in wire electric discharge machining of pure titanium. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 227:7, pages 972-992.
Crossref
Crossref
Anish Kumar, Vinod Kumar & Jatinder Kumar. (2013) Experimental Investigation on Material Transfer Mechanism in WEDM of Pure Titanium (Grade-2). Advances in Materials Science and Engineering 2013, pages 1-20.
Crossref
Crossref
Norfadzlan Yusup, Azlan Mohd Zain & Siti Zaiton Mohd Hashim. (2012) Evolutionary techniques in optimizing machining parameters: Review and recent applications (2007–2011). Expert Systems with Applications 39:10, pages 9909-9927.
Crossref
Crossref
SOUMYAKANT PADHEE, NIHARRANJAN NAYAK, S K PANDA, P R DHAL & S S MAHAPATRA. (2012) Multi-objective parametric optimization of powder mixed electro-discharge machining using response surface methodology and non-dominated sorting genetic algorithm. Sadhana 37:2, pages 223-240.
Crossref
Crossref