Citations (180)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (20)
Hamed Adibi, Omid Hatami & Seyed Mehdi Rezaei. (2023) Effects of minimum quantity lubrication (MQL) on grinding processes using eco-friendly nanofluids: a review. Advances in Materials and Processing Technologies 0:0, pages 1-42.
Read now
Read now
Raneesha Fernando, Janaka Gamage & Hirushie Karunathilake. (2022) Sustainable machining: environmental performance analysis of turning. International Journal of Sustainable Engineering 15:1, pages 15-34.
Read now
Read now
M. Dhananchezian. (2022) A review on performance evaluation of liquid nitrogen as coolant in turning Ti-6Al-4V alloy. Machining Science and Technology 26:5, pages 701-857.
Read now
Read now
N. Ariharan, C. G. Sriram, N. Radhika, S. Aswin & S. Haridas. (2022) A comprehensive review of vapour deposited coatings for cutting tools: properties and recent advances. Transactions of the IMF 100:5, pages 262-275.
Read now
Read now
Trung-Thanh Nguyen, Truong-An Nguyen, Quang-Hung Trinh & Xuan-Ba Le. (2022) Multi-performance optimization of multi-roller burnishing process in sustainable lubrication condition. Materials and Manufacturing Processes 37:4, pages 407-427.
Read now
Read now
Manoj Kumar K & Amitava Ghosh. (2021) On grinding force ratio, specific energy, G-ratio and residual stress in SQCL assisted grinding using aerosol of MWCNT nanofluid. Machining Science and Technology 25:4, pages 585-607.
Read now
Read now
He Sui, Xiangyu Zhang & Deyuan Zhang. (2021) Surface modeling and analysis of high-speed ultrasonic vibration cutting. Machining Science and Technology 25:1, pages 100-117.
Read now
Read now
P. Sivaiah & D. Chakradhar. (2020) Identifying the effectiveness of manner of cryogenic coolant supply in different cryogenic cooling techniques in turning process—a review. Machining Science and Technology 24:6, pages 948-999.
Read now
Read now
Arul Kulandaivel & Senthil Kumar. (2020) Effect of magneto rheological minimum quantity lubrication on machinability, wettability and tribological behavior in turning of Monel K500 alloy. Machining Science and Technology 24:5, pages 810-836.
Read now
Read now
M. Jebaraj, M. Pradeep Kumar, N. Yuvaraj & R. Anburaj. (2020) Investigation of surface integrity in end milling of 55NiCrMoV7 die steel under the cryogenic environments. Machining Science and Technology 24:3, pages 465-488.
Read now
Read now
P. Sivaiah, Venkata Ajay Kumar G, Muralidhar Singh M & Harinandan Kumar. (2020) Effect of novel hybrid texture tool on turning process performance in MQL machining of Inconel 718 superalloy. Materials and Manufacturing Processes 35:1, pages 61-71.
Read now
Read now
Fengbiao Wang & Yongqing Wang. (2019) Investigate on effect of cryogenic cooling on oxidation wear of WC-Co carbide tool milling titanium alloy. Machining Science and Technology 23:6, pages 906-924.
Read now
Read now
M. Jebaraj, M. Pradeep Kumar, N. Yuvaraj & G. Mujibar Rahman. (2019) Experimental study of the influence of the process parameters in the milling of Al6082-T6 alloy. Materials and Manufacturing Processes 34:12, pages 1411-1427.
Read now
Read now
C. Chandrasekhara Sastry, P. Hariharan & M. Pradeep Kumar. (2019) Experimental investigation of dry, wet and cryogenic boring of AA 7075 alloy. Materials and Manufacturing Processes 34:7, pages 814-831.
Read now
Read now
M. Jebaraj & M. Pradeep Kumar. (2019) Effect of cryogenic CO2 and LN2 coolants in milling of aluminum alloy. Materials and Manufacturing Processes 34:5, pages 511-520.
Read now
Read now
S. Dinesh, V. Senthilkumar & P. Asokan. (2017) Experimental studies on the cryogenic machining of biodegradable ZK60 Mg alloy using micro-textured tools. Materials and Manufacturing Processes 32:9, pages 979-987.
Read now
Read now
A. Suárez, L. N. López de Lacalle, R. Polvorosa, F. Veiga & A. Wretland. (2017) Effects of high-pressure cooling on the wear patterns on turning inserts used on alloy IN718. Materials and Manufacturing Processes 32:6, pages 678-686.
Read now
Read now
Shakeel Ahmed & Pradeep Kumar. (2017) Performance evaluation of cryogenic cooling in reaming titanium alloy. Materials and Manufacturing Processes 32:3, pages 302-308.
Read now
Read now
Zhiyu Wang, Saurabh Basu & Christopher Saldana. (2017) Low-temperature machining in a fully submerged cryogenic environment. Machining Science and Technology 21:1, pages 19-36.
Read now
Read now
A. M. M. Sharif Ullah, Akiyoshi Fuji, Akihiko Kubo, Jun’ichi Tamaki & Masaaki Kimura. (2015) On the Surface Metrology of Bimetallic Components. Machining Science and Technology 19:2, pages 339-359.
Read now
Read now
Articles from other publishers (160)
A. Nandakumar, T. Rajmohan & S. Vijayabhaskar. 2024. Advanced Composites. Advanced Composites
423
449
.
Dhvanil Chauhan, Mayur A. Makhesana, Rizwan Abdul Rahman Rashid, Vivek Joshi & Navneet Khanna. (2023) Comparison of Machining Performance of Ti-6Al-4V under Dry and Cryogenic Techniques Based on Tool Wear, Surface Roughness, and Power Consumption. Lubricants 11:11, pages 493.
Crossref
Crossref
Rahul Davis, Abhishek Singh, Robson Bruno Dutra Pereira, Roberta Maia Sabino, Ketul Popat, Paulo Soares & Lincoln Cardoso Brandão. (2023) Collaborative Impact of Cryo-Treated Cutting Tool and Hybrid Milling Environment Towards Improved Sustainable Milling of ASTM F2063 Ni55.6Ti44.4 Alloy. International Journal of Precision Engineering and Manufacturing-Green Technology 10:6, pages 1485-1509.
Crossref
Crossref
Saurabh Tiwari, M Amarnath, Munish Kumar Gupta & Mayur A. Makhesana. (2023) Performance assessment of nano-Al2O3 enriched coconut oil as a cutting fluid in MQL-assisted machining of AISI-1040 steel. The International Journal of Advanced Manufacturing Technology 129:3-4, pages 1689-1702.
Crossref
Crossref
Asif Iqbal, Jannis Saelzer, Muhammad S. Abu Bakar, Dirk Biermann, Aqib Mashood Khan, Martin Sicking & Malik M. Nauman. (2023) Side-milling of Incoloy 825 under pulsed and continuous modes of cryogenic cooling. Journal of Manufacturing Processes 104, pages 246-256.
Crossref
Crossref
Serhat Şap. (2023) Machining and Energy Aspect Assessment with Sustainable Cutting Fluid Strategies of Al–12Si Based Hybrid Composites. International Journal of Precision Engineering and Manufacturing-Green Technology.
Crossref
Crossref
Nimel Sworna Ross, N. Srinivasan, M. Belsam Jeba Ananth, Abdullah Yahia AlFaify, Saqib Anwar & Munish Kumar Gupta. (2023) Performance assessment of different cooling conditions in improving the machining and tribological characteristics of additively manufactured AlSi10Mg alloy. Tribology International 186, pages 108631.
Crossref
Crossref
Mehmet Erdi Korkmaz, M.K. Gupta, Nimel Sworna Ross & Vinothkumar Sivalingam. (2023) Implementation of green cooling/lubrication strategies in metal cutting industries: A state of the art towards sustainable future and challenges. Sustainable Materials and Technologies 36, pages e00641.
Crossref
Crossref
Navneet Khanna, Jay Airao, G. Kshitij, Chandrakant K. Nirala & Hussien Hegab. (2023) Sustainability analysis of new hybrid cooling/lubrication strategies during machining Ti6Al4V and Inconel 718 alloys. Sustainable Materials and Technologies 36, pages e00606.
Crossref
Crossref
Hussam Jouhara, Amisha Chauhan, Valentin Guichet, Bertrand Delpech, Mohammad Ali Abdelkareem, A.G. Olabi & Jon Trembley. (2023) Low-temperature heat transfer mediums for cryogenic applications. Journal of the Taiwan Institute of Chemical Engineers 148, pages 104709.
Crossref
Crossref
Serhat Şap, Üsame Ali Usca, Yavuz Selim Tarih, Adem Yar, Mustafa Kuntoğlu & Munish Kumar Gupta. (2023) Novel Use of Cellulose Based Biodegradable Nano Crystals in the Machining of PPS Composites: An Approach Towards Green Machining. International Journal of Precision Engineering and Manufacturing-Green Technology.
Crossref
Crossref
Huiping Zhang, Liqiang Qu & Chenglong Ding. (2023) Study of Surface Integrity of SiCp/Al Composites Using High-Speed Milling under Cryogenic Liquid Nitrogen Conditions. Machines 11:6, pages 608.
Crossref
Crossref
Nagore Villarrazo, Soraya Caneda, Octavio Pereira, Adrian Rodríguez & Luis Norberto López de Lacalle. (2023) The Effects of Lubricooling Ecosustainable Techniques on Tool Wear in Carbon Steel Milling. Materials 16:7, pages 2936.
Crossref
Crossref
AYBARS MAHMAT, NIHAT TOSUN & SALIH AĞAR. (2023) EFFECT OF THE COOLING WITH AIR AND WATER VAPOR ON MILLING PERFORMANCES. Surface Review and Letters 30:04.
Crossref
Crossref
Siyu Li, Pei Yan, Lei Fan, Shiqi Chen, Li Jiao & Xibin Wang. (2023) Effect of cryogenic machining-strengthening process on enhanced surface integrity and fatigue properties of ZK61M magnesium alloy. Journal of Manufacturing Processes 92, pages 297-310.
Crossref
Crossref
Mayur A. Makhesana, Kaushik M. Patel, Grzegorz M. Krolczyk, Mohd Danish, Anil Kumar Singla & Navneet Khanna. (2023) Influence of MoS2 and graphite-reinforced nanofluid-MQL on surface roughness, tool wear, cutting temperature and microhardness in machining of Inconel 625. CIRP Journal of Manufacturing Science and Technology 41, pages 225-238.
Crossref
Crossref
Pankaj Kumar Singh, Santosh Kumar & Pramod Kumar Jain. (2023) Surface Integrity of Cryogenically Finished Additively Manufactured and Conventional Ti-6Al-4V Alloy. Metals 13:4, pages 693.
Crossref
Crossref
Muhammad Syamil Zakaria, Mazli Mustapha, Azwan Iskandar Azmi & Chu Yee Khor. (2023) Chip Morphology and Surface Integrity in Turning AZ31 Magnesium Alloy under Dry Machining and Submerged Convective Cooling. Metals 13:3, pages 619.
Crossref
Crossref
Pankaj Kumar Singh, Santosh Kumar & Pramod Kumar Jain. (2023) Effect of cryogenic grinding on surface characteristics of additively manufactured Ti-6Al-4V alloy. Surface Topography: Metrology and Properties 11:1, pages 015014.
Crossref
Crossref
Lara Vivian Fricke, Stephan Basten, Hai Nam Nguyen, Bernd Breidenstein, Benjamin Kirsch, Jan C. Aurich, David Zaremba, Hans Jürgen Maier & Sebastian Barton. (2023) Combined influence of cooling strategies and depth of cut on the deformation-induced martensitic transformation turning AISI 304. Journal of Materials Processing Technology 312, pages 117861.
Crossref
Crossref
Muralidhar Vardhanapu, Phaneendra Kiran Chaganti & Pranay Tarigopula. (2023) Characterization and machine learning-based parameter estimation in MQL machining of a superalloy for developed green nano-metalworking fluids. Journal of the Brazilian Society of Mechanical Sciences and Engineering 45:3.
Crossref
Crossref
Ashwani Sharma, Abhimanyu Chaudhari, Mohd Zaheer Khan Yusufzai & Meghanshu Vashista. (2023) An Experimental Study on Improving Grindability with LN2 Coolant for Grinding AISI D2 Tool Steel. Journal of Materials Engineering and Performance.
Crossref
Crossref
Zhicheng Dai, Pei Yan, Hao Chen, Siyu Li, Minghui Cheng, Jie Sun, Li Jiao & Xibin Wang. (2023) Investigation of machining property and sustainability performance of cryogenic turning of GH605 superalloy. The International Journal of Advanced Manufacturing Technology.
Crossref
Crossref
P.R. Rakesh & D. Chakradhar. (2023) Machining performance comparison of Inconel 625 superalloy under sustainable machining environments. Journal of Manufacturing Processes 85, pages 742-755.
Crossref
Crossref
P. Albertelli, M. Strano & M. Monno. (2023) Simulation of the effects of cryogenic liquid nitrogen jets in Ti6Al4V milling. Journal of Manufacturing Processes 85, pages 323-344.
Crossref
Crossref
Amjad Baig, Syed Husain Imran Jaffery, Muhammad Ali Khan & Mansoor Alruqi. (2022) Statistical Analysis of Surface Roughness, Burr Formation and Tool Wear in High Speed Micro Milling of Inconel 600 Alloy under Cryogenic, Wet and Dry Conditions. Micromachines 14:1, pages 13.
Crossref
Crossref
Wenhao Xu, Changhe Li, Yanbin Zhang, Hafiz Muhammad Ali, Shubham Sharma, Runze Li, Min Yang, Teng Gao, Mingzheng Liu, Xiaoming Wang, Zafar Said, Xin Liu & Zongming Zhou. (2022) Electrostatic atomization minimum quantity lubrication machining: from mechanism to application. International Journal of Extreme Manufacturing 4:4, pages 042003.
Crossref
Crossref
Pradeep Krishnan G & Samuel Raj D. (2022) Analysis of high speed drilling AISI 304 under MQL condition through a novel tool wear measurement method and surface integrity studies. Tribology International 176, pages 107871.
Crossref
Crossref
Abdalla Mohammed, Sathish Kannan, Salman Pervaiz, Shafahat Ali, Kevin K. Thomas & Ramanujam Karthikeyan. (2022) Sustainable Machining of Mg-9Al-1.4Zn Foam Used for Temporary Biomedical Implant Using Cryogenic Cooling. Materials 15:19, pages 6678.
Crossref
Crossref
Serhat Şap, Üsame Ali Usca, Mahir Uzun, Mustafa Kuntoğlu & Emin Salur. (2022) Performance evaluation of AlTiN coated carbide tools during machining of ceramic reinforced Cu-based hybrid composites under cryogenic, pure-minimum quantity lubrication and dry regimes. Journal of Composite Materials 56:22, pages 3401-3421.
Crossref
Crossref
Mustafa Kuntoglu. (2022) Machining induced tribological investigations in sustainable milling of Hardox 500 steel: A new approach of measurement science. Measurement 201, pages 111715.
Crossref
Crossref
Prassan Shah, Navneet Khanna, Amit Arora & Nishkarsh Srivastava. (2022) Comparison of LN2 and LCO2 based on machining performance indicators for drilling Inconel 718. Journal of Manufacturing Processes 81, pages 444-466.
Crossref
Crossref
Wojciech Stachurski, Jacek Sawicki, Krzysztof Krupanek & Krzysztof Nadolny. (2022) A model and its experiment using compressed cold air to clean the active surface of a grinding wheel during sharping of a hob cutter. The International Journal of Advanced Manufacturing Technology 122:2, pages 911-931.
Crossref
Crossref
A. BALASUADHAKAR, S. THIRUMALAI KUMARAN, RENDI KURNIAWAN & FAROOQ AHMED. (2022) A COMPREHENSIVE REVIEW ON MINIMUM QUANTITY LUBRICATION IN TURNING PROCESS. Surface Review and Letters 29:08.
Crossref
Crossref
Mustafa Kuntoğlu. (2022) Measurement and analysis of sustainable indicators in machining of Armox 500T armor steel. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 236:13, pages 7330-7349.
Crossref
Crossref
Yubin Wang, Siqin Pang, Pei Yan, Li Jiao, Tianyang Qiu, Han Zhou & Xibin Wang. (2022) Experimental research on cryogenic cutting performance of Ni-based superalloy GH4169. The International Journal of Advanced Manufacturing Technology 121:1-2, pages 379-392.
Crossref
Crossref
Rahul Davis, Abhishek Singh, Mark James Jackson, Reginaldo Teixeira Coelho, Divya Prakash, Charalambos Panayiotou Charalambous, Waqar Ahmed, Leonardo Rosa Ribeiro da Silva & Abner Ankit Lawrence. (2022) A comprehensive review on metallic implant biomaterials and their subtractive manufacturing. The International Journal of Advanced Manufacturing Technology 120:3-4, pages 1473-1530.
Crossref
Crossref
Thanassis Souflas, Harry Bikas, Mani Ghassempouri, Alessandro Salmi, Eleonora Atzeni, Abdollah Saboori, Ivan Brugnetti, Anna Valente, Federico Mazzucato & Panagiotis Stavropoulos. (2021) A comparative study of dry and cryogenic milling for Directed Energy Deposited IN718 components: effect on process and part quality. The International Journal of Advanced Manufacturing Technology 119:1-2, pages 745-758.
Crossref
Crossref
Charlie Salame & Roland Bejjani. (2022) A better understanding of the cryogenic environment and the effect of nozzle location on the machinability of low carbon steel. Journal of Manufacturing Processes 74, pages 544-556.
Crossref
Crossref
Nithin Rangasamy, C.S. Rakurty & A.K. Balaji. (2022) A Multiscale Study on Machining Induced Surface Integrity in Ti-6Al-4V Alloy. Procedia CIRP 108, pages 787-792.
Crossref
Crossref
Berend Denkena, Bernd Breidenstein, Marc-André Dittrich, Marcel Wichmann, Hai Nam Nguyen, Lara Vivian Fricke, David Zaremba & Sebastian Barton. (2022) Setting of deformation-induced martensite content in cryogenic external longitudinal turning. Procedia CIRP 108, pages 170-175.
Crossref
Crossref
Kanagaraju T.Gowthaman B.Arunkumar A.Akash S.. (2022) Optimization of Machining parameters in wet and cryogenic Machining using TOPSIS approach. Materials Today: Proceedings 62, pages 1157-1162.
Crossref
Crossref
Veerappan G.Pritima D.Parthasarathy N.R.Ramesh B.Jayasathyakawin S.. (2022) Influence of cryogenic treatment on tool life, flank wear and surface roughness for machining nickel based super alloy-Haynes 282. Materials Today: Proceedings 59, pages 1571-1574.
Crossref
Crossref
Nimel Sworna Ross, C. Gopinath, Srinivasan Nagarajan, Munish Kumar Gupta, Ragavanantham Shanmugam, M. Saravana Kumar, Mehmet Boy & Mehmet Erdi Korkmaz. (2022) Impact of hybrid cooling approach on milling and surface morphological characteristics of Nimonic 80A alloy. Journal of Manufacturing Processes 73, pages 428-439.
Crossref
Crossref
Rahul Davis & Abhishek Singh. (2021) Performance Study of Cryo-Treated End Mill Via Wet, Cryogenic, and Hybrid Lubri-Coolant-Milling Induced Surface Integrity of Biocompatible Mg Alloy AZ91D. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 235:23, pages 7045-7061.
Crossref
Crossref
Trung-Thanh Nguyen. (2021) Multi-response performance optimization of burnishing operation for improving hole quality. Journal of the Brazilian Society of Mechanical Sciences and Engineering 43:12.
Crossref
Crossref
Boki Dugo Bedada, Guteta Kabeta Woyesssa, Moera Gutu Jiru, Besufekad Negash Fetene & Tekle Gemechu. (2021) Experimental Investigation on the Advantages of Dry Machining over Wet Machining during Turning of AISI 1020 Steel. Journal of Modern Mechanical Engineering and Technology 8, pages 12-25.
Crossref
Crossref
Emre Tascioglu, Hamaid Mahmood Khan, Yusuf Kaynak, Mert Coşkun, Gurkan Tarakci & Ebubekir Koç. (2021) Effect of aging and finish machining on the surface integrity of selective laser melted maraging steel. Rapid Prototyping Journal 27:10, pages 1900-1909.
Crossref
Crossref
Prassan Shah, Navneet Khanna, Anil Kumar Singla & Anuj Bansal. (2021) Tool wear, hole quality, power consumption and chip morphology analysis for drilling Ti-6Al-4V using LN2 and LCO2. Tribology International 163, pages 107190.
Crossref
Crossref
Rahul Davis, Abhishek Singh, Roberta Maia Sabino, Robson Bruno Dutra Pereira, Ketul Popat, Paulo Soares & Mark James Jackson. (2021) Performance Investigation of Cryo-treated End Mill on the Mechanical and in vitro behavior of Hybrid-lubri-coolant-milled Ti-6Al-4V alloy. Journal of Manufacturing Processes 71, pages 472-488.
Crossref
Crossref
Nimel Sworna Ross, Mozammel Mia, Saqib Anwar, Manimaran G, Mustafa Saleh & Shafiq Ahmad. (2021) A hybrid approach of cooling lubrication for sustainable and optimized machining of Ni-based industrial alloy. Journal of Cleaner Production 321, pages 128987.
Crossref
Crossref
Jay Airao, Chandrakant K. Nirala, Luis Noberto López de Lacalle & Navneet Khanna. (2021) Tool Wear Analysis during Ultrasonic Assisted Turning of Nimonic-90 under Dry and Wet Conditions. Metals 11:8, pages 1253.
Crossref
Crossref
Jie Chen, Weiwei Yu, Zhenyu Zuo, Yugang Li, Dong Chen, Qinglong An, Haowei Wang & Ming Chen. (2021) Tribological properties and tool wear in milling of in-situ TiB2/7075 Al composite under various cryogenic MQL conditions. Tribology International 160, pages 107021.
Crossref
Crossref
Navneet Khanna, Chetan Agrawal, Danil Yu Pimenov, Anil Kumar Singla, Alisson Rocha Machado, Leonardo Rosa Ribeiro da Silva, Munish Kumar Gupta, Murat Sarikaya & Grzegorz M. Krolczyk. (2021) Review on design and development of cryogenic machining setups for heat resistant alloys and composites. Journal of Manufacturing Processes 68, pages 398-422.
Crossref
Crossref
O. Kitay & Y. Kaynak. (2021) The Effect of Flood, High-Pressure Cooling, and CO2-Assisted Cryogenic Machining on Microhardness, Microstructure, and X-ray Diffraction Patterns of NiTi Shape Memory Alloy. Journal of Materials Engineering and Performance 30:8, pages 5799-5810.
Crossref
Crossref
Mohd Danish, Saeed Rubaiee & Hassan Ijaz. (2021) Predictive Modelling and Multi-Objective Optimization of Surface Integrity Parameters in Sustainable Machining Processes of Magnesium Alloy. Materials 14:13, pages 3547.
Crossref
Crossref
Fengbiao Wang & Yongqing Wang. (2021) Comparison of cryogenic cooling strategy effects on machinability of milling nickel-based alloy. Journal of Manufacturing Processes 66, pages 623-635.
Crossref
Crossref
Lucia Lizzul, Rachele Bertolini, Andrea Ghiotti & Stefania Bruschi. (2021) Turning of Additively Manufactured Ti6Al4V: Effect of the Highly Oriented Microstructure on the Surface Integrity. Materials 14:11, pages 2842.
Crossref
Crossref
Ilesanmi Daniyan, Khumbulani Mpofu, Boitumelo Ramatsetse & Munish Gupta. (2021) Review of life cycle models for enhancing machine tools sustainability: lessons, trends and future directions. Heliyon 7:4, pages e06790.
Crossref
Crossref
Tej Patel, Navneet Khanna, Sahitya Yadav, Prassan Shah, Murat Sarikaya, Dilpreet Singh, Munish Kumar Gupta & Nitin Kotkunde. (2021) Machinability analysis of nickel-based superalloy Nimonic 90: a comparison between wet and LCO2 as a cryogenic coolant. The International Journal of Advanced Manufacturing Technology.
Crossref
Crossref
Arunachalam S. S. Balan, Kannan Chidambaram, Arun V. Kumar, Hariharan Krishnaswamy, Danil Yurievich Pimenov, Khaled Giasin & Krzysztof Nadolny. (2021) Effect of Cryogenic Grinding on Fatigue Life of Additively Manufactured Maraging Steel. Materials 14:5, pages 1245.
Crossref
Crossref
Ashwani Sharma, Abhimanyu Chaudhari, Akash Subhash Awale, Mohd Zaheer Khan Yusufzai & Meghanshu Vashista. (2021) Effect of Grinding Environments on Magnetic Response of AISI D2 Tool Steel. Russian Journal of Nondestructive Testing 57:3, pages 212-221.
Crossref
Crossref
M C Karthik Rao, Rashmi L Malghan, Arun Kumar Shettigar, Mervin A Herbert & Shrikantha S Rao. (2021) Advantages of cryogenic machining technique over without-coolant and with-coolant machining on SS316. Engineering Research Express 3:1, pages 015040.
Crossref
Crossref
Jasjeevan Singh, Simranpreet Singh Gill, Manu Dogra & Rupinder Singh. (2021) A review on cutting fluids used in machining processes. Engineering Research Express 3:1, pages 012002.
Crossref
Crossref
Munish Kumar Gupta, Qinghua Song, Zhanqiang Liu, Murat Sarikaya, Muhammad Jamil, Mozammel Mia, Anil Kumar Singla, Aqib Mashood Khan, Navneet Khanna & Danil Yu Pimenov. (2021) Environment and economic burden of sustainable cooling/lubrication methods in machining of Inconel-800. Journal of Cleaner Production 287, pages 125074.
Crossref
Crossref
Seyed Nader Ameli Kalkhoran, Mehrdad Vahdati, Zhiyu Zhang & Jiwang Yan. (2020) Influence of Wax Lubrication on Cutting Performance of Single-Crystal Silicon in Ultraprecision Microgrooving. International Journal of Precision Engineering and Manufacturing-Green Technology 8:2, pages 611-624.
Crossref
Crossref
Nurul Hayati Binti Abdul Halim, Che Hassan Che Haron, Jaharah A. Ghani & Muammar Faiq Azhar. (2019) Tool life prediction by RSM for cryogenic milling of inconel 718. Industrial Lubrication and Tribology 73:1, pages 8-14.
Crossref
Crossref
Vinay Varghese & Soham Mujumdar. (2021) Micromilling-induced Surface Integrity of Porous Additive Manufactured Ti6Al4V Alloy. Procedia Manufacturing 53, pages 387-394.
Crossref
Crossref
G. Ortiz-de-Zarate, D. Soriano, A. Madariaga, A. Garay, I. Rodriguez & P.J. Arrazola. (2021) Experimental and FEM analysis of dry and cryogenic turning of hardened steel 100Cr6 using CBN Wiper tools. Procedia CIRP 102, pages 7-12.
Crossref
Crossref
Asit Kumar Parida & Kalipada Maity. (2021) Study of machinability in heat-assisted machining of nickel-base alloy. Measurement 170, pages 108682.
Crossref
Crossref
Munish Kumar Gupta, Qinghua Song, Zhanqiang Liu, Murat Sarikaya, Muhammad Jamil, Mozammel Mia, Vinod Kushvaha, Anil Kumar Singla & Zhixiong Li. (2020) Ecological, economical and technological perspectives based sustainability assessment in hybrid-cooling assisted machining of Ti-6Al-4 V alloy. Sustainable Materials and Technologies 26, pages e00218.
Crossref
Crossref
Kishor Kumar Gajrani. (2020) Assessment of cryo-MQL environment for machining of Ti-6Al-4V. Journal of Manufacturing Processes 60, pages 494-502.
Crossref
Crossref
Matheus Emmanuel Pereira Fernandes, Anderson Clayton Alves de Melo, Adilson José de Oliveira & Carlos Chesman. (2020) Hard turning of AISI D6 tool steel under dry, wet and cryogenic conditions: An economic investigation aimed at achieving a sustainable machining approach. Cleaner Engineering and Technology 1, pages 100022.
Crossref
Crossref
J Kesavan & V Senthilkumar. (2020) Experimental investigations on cryo-machining of Hastelloy C-276 with tool wear characteristics. Sādhanā 45:1.
Crossref
Crossref
Shalina Sheik Muhamad, Jaharah A. Ghani, Che Hassan Che Haron & Hafizal Yazid. (2020) Cryogenic milling and formation of nanostructured machined surface of AISI 4340. Nanotechnology Reviews 9:1, pages 1104-1117.
Crossref
Crossref
I. S. Jawahir, J. Schoop, Y. Kaynak, A. K. Balaji, R. Ghosh & T. Lu. (2020) Progress Toward Modeling and Optimization of Sustainable Machining Processes. Journal of Manufacturing Science and Engineering 142:11.
Crossref
Crossref
Rahul Davis & Abhishek Singh. (2020) Tailoring Surface Integrity of Biomedical Mg Alloy AZ31B Using Distinct End Mill Treatment Conditions and Machining Environments. Journal of Materials Engineering and Performance 29:11, pages 7617-7635.
Crossref
Crossref
Chongwen Yang, Wenqian Zhang, Yujin Hu & Xuelin Wang. (2020) Effects of Cryogenic Milling on Stress Corrosion Cracking Resistance of AISI 316L Austenitic Stainless Steel. Journal of Materials Engineering and Performance 29:11, pages 7104-7114.
Crossref
Crossref
Chetan Agrawal, Navneet Khanna, Catalin Iulian Pruncu, Anil Kumar Singla & Munish Kumar Gupta. (2020) Tool wear progression and its effects on energy consumption and surface roughness in cryogenic assisted turning of Ti-6Al-4V. The International Journal of Advanced Manufacturing Technology 111:5-6, pages 1319-1331.
Crossref
Crossref
A. Nandakumar, T. Rajmohan, R. Sundararajan, K. Venkatesh, N. Muni Deepak & K. Venkateshwaran. (2020) Study of the G-ratio of aluminium silicon carbide nano particles reinforced metal matrix composites. IOP Conference Series: Materials Science and Engineering 954:1, pages 012035.
Crossref
Crossref
Yongqing Wang, Minghua Dai, Kuo Liu, Jiaxin Liu, Lingsheng Han & Haibo Liu. (2020) Research on surface heat transfer mechanism of liquid nitrogen jet cooling in cryogenic machining. Applied Thermal Engineering 179, pages 115607.
Crossref
Crossref
S Vignesh & U Mohammed Iqbal. (2020) Experimental study on end milling parameters of Ti6Al4V Titanium superalloy in different cutting environment. IOP Conference Series: Materials Science and Engineering 912:3, pages 032051.
Crossref
Crossref
Prassan Shah, Navneet Khanna & Chetan. (2020) Comprehensive machining analysis to establish cryogenic LN2 and LCO2 as sustainable cooling and lubrication techniques. Tribology International 148, pages 106314.
Crossref
Crossref
Soumikh Roy, Ramanuj Kumar, Ashok Kumar Sahoo & Amlana Panda. (2020) Cutting Tool Failure and Surface Finish Analysis in Pulsating MQL-Assisted Hard Turning. Journal of Failure Analysis and Prevention 20:4, pages 1274-1291.
Crossref
Crossref
Octavio Pereira, Ainhoa Celaya, Gorka Urbikaín, Adrián Rodríguez, Asier Fernández-Valdivielso & L. Noberto López de Lacalle. (2020) CO2 cryogenic milling of Inconel 718: cutting forces and tool wear. Journal of Materials Research and Technology 9:4, pages 8459-8468.
Crossref
Crossref
Nurul Hayati Abdul Halim, Che Hassan Che Haron & Jaharah Abdul Ghani. (2020) Sustainable Machining of Hardened Inconel 718: A Comparative Study. International Journal of Precision Engineering and Manufacturing 21:7, pages 1375-1387.
Crossref
Crossref
Navneet Khanna, Prassan Shah & Chetan. (2020) Comparative analysis of dry, flood, MQL and cryogenic CO2 techniques during the machining of 15-5-PH SS alloy. Tribology International 146, pages 106196.
Crossref
Crossref
Divya Zindani & Kaushik Kumar. (2020) A brief review on cryogenics in machining process. SN Applied Sciences 2:6.
Crossref
Crossref
C. Chandrasekhara Sastry, M. Abeens, N. Pradeep & M. A. Muthu Manickam. (2020) Microstructural analysis, radiography, tool wear characterization, induced residual stress and corrosion behavior of conventional and cryogenic trepanning of DSS 2507. Journal of Mechanical Science and Technology 34:6, pages 2535-2547.
Crossref
Crossref
Kamil Leksycki, Eugene Feldshtein, Grzegorz M. Królczyk & Stanisław Legutko. (2020) On the Chip Shaping and Surface Topography When Finish Cutting 17-4 PH Precipitation-Hardening Stainless Steel under Near-Dry Cutting Conditions. Materials 13:9, pages 2188.
Crossref
Crossref
Navneet Khanna, Chetan Agrawal, Manu Dogra & Catalin Iulian Pruncu. (2020) Evaluation of tool wear, energy consumption, and surface roughness during turning of inconel 718 using sustainable machining technique. Journal of Materials Research and Technology 9:3, pages 5794-5804.
Crossref
Crossref
Juliane Moritz, André Seidel, Michael Kopper, Jörg Bretschneider, Johannes Gumpinger, Thomas Finaske, Mirko Riede, Michael Schneeweiß, Elena López, Frank Brückner, Christoph Leyens, Thomas Rohr & Tommaso Ghidini. (2020) Hybrid manufacturing of titanium Ti-6Al-4V combining laser metal deposition and cryogenic milling. The International Journal of Advanced Manufacturing Technology 107:7-8, pages 2995-3009.
Crossref
Crossref
Navneet Khanna, Franci Pusavec, Chetan Agrawal & Grzegorz M. Krolczyk. (2020) Measurement and evaluation of hole attributes for drilling CFRP composites using an indigenously developed cryogenic machining facility. Measurement 154, pages 107504.
Crossref
Crossref
Yongqing Wang, Jiaxin Liu, Kuo Liu, Zhaohuan Liu, Siqi Wang & Minghua Dai. (2020) Modeling of temperature distribution in turning of Ti-6Al-4V with liquid nitrogen cooling. The International Journal of Advanced Manufacturing Technology 107:1-2, pages 451-462.
Crossref
Crossref
Muhammad Ali Khan, Syed Husain Imran Jaffery, Mushtaq Khan, Muhammad Younas, Shahid Ikramullah Butt, Riaz Ahmad & Salman Sagheer Warsi. (2020) Multi-objective optimization of turning titanium-based alloy Ti-6Al-4V under dry, wet, and cryogenic conditions using gray relational analysis (GRA). The International Journal of Advanced Manufacturing Technology 106:9-10, pages 3897-3911.
Crossref
Crossref
Kosaraju Satynarayana, Aki Ruthwik, S Siddhartha, NV Dharma Teja, KSV Phanindra & Kumkuma Rajkiran. (2020) Taguchi optimisation of Turning Inconel 600 under dry and MQL condition using uncoated Tool. E3S Web of Conferences 184, pages 01048.
Crossref
Crossref
Daniel Gross, Markus Blauhöfer & Nico Hanenkamp. (2020) Milling of Ti6Al4V with carbon dioxide as carrier medium for minimum quantity lubrication with different oils. Procedia Manufacturing 43, pages 439-446.
Crossref
Crossref
Nima Zoghipour, Emre Tascioglu, Gokhan Atay & Yusuf Kaynak. (2020) Machining-induced surface integrity of holes drilled in lead-free brass alloy. Procedia CIRP 87, pages 148-152.
Crossref
Crossref
Stephan Basten, Benjamin Kirsch, Rolf Merz, Michael Kopnarski, Hans Hasse & Jan C. Aurich. (2020) Adsorption and reaction layers when turning AISI 304 using various cooling strategies. Procedia CIRP 87, pages 125-130.
Crossref
Crossref
Senol Bayraktar. 2020. High Speed Machining. High Speed Machining
223
241
.
C. Chandrasekhara Sastry, K. Gokulakrishnan, P. Hariharan, M. Pradeep Kumar & S. Rajendra Boopathy. (2019) Investigation of boring on gunmetal in dry, wet and cryogenic conditions. Journal of the Brazilian Society of Mechanical Sciences and Engineering 42:1.
Crossref
Crossref
Wei Zhao, Fei Ren, Asif Iqbal, Le Gong, Ning He & Qing Xu. (2019) Effect of liquid nitrogen cooling on surface integrity in cryogenic milling of Ti-6Al-4 V titanium alloy. The International Journal of Advanced Manufacturing Technology 106:3-4, pages 1497-1508.
Crossref
Crossref
Potta Sivaiah & Bodicherla Uma. (2019) Multiobjective optimization of sustainable turning process using TOPSIS method. Emerging Materials Research 8:4, pages 686-695.
Crossref
Crossref
Natasha A. Raof, Jaharah A. Ghani & Che Hassan Che Haron. (2019) Machining-induced grain refinement of AISI 4340 alloy steel under dry and cryogenic conditions. Journal of Materials Research and Technology 8:5, pages 4347-4353.
Crossref
Crossref
Alborz Shokrani, Ihsan Al-Samarrai & Stephen T. Newman. (2019) Hybrid cryogenic MQL for improving tool life in machining of Ti-6Al-4V titanium alloy. Journal of Manufacturing Processes 43, pages 229-243.
Crossref
Crossref
Le Gong, Wei Zhao, Fei Ren, Ning He, Liang Li, Qing Xu & Aqib Mashood Khan. (2019) Experimental study on surface integrity in cryogenic milling of 35CrMnSiA high-strength steel. The International Journal of Advanced Manufacturing Technology 103:1-4, pages 605-615.
Crossref
Crossref
Emre Tascioglu, Armin Gharibi & Yusuf Kaynak. (2019) High speed machining of near-beta titanium Ti-5553 alloy under various cooling and lubrication conditions. The International Journal of Advanced Manufacturing Technology 102:9-12, pages 4257-4271.
Crossref
Crossref
B. Sachin, S. Narendranath & D. Chakradhar. (2019) Selection of optimal process parameters in sustainable diamond burnishing of 17-4 PH stainless steel. Journal of the Brazilian Society of Mechanical Sciences and Engineering 41:5.
Crossref
Crossref
M. Jebaraj & M. Pradeep Kumar. (2019) End milling of DIN 1.2714 die steel with cryogenic CO2 cooling. Journal of Mechanical Science and Technology 33:5, pages 2407-2416.
Crossref
Crossref
Krystian K. Wika, Przemyslaw Litwa & Carl Hitchens. (2019) Impact of supercritical carbon dioxide cooling with Minimum Quantity Lubrication on tool wear and surface integrity in the milling of AISI 304L stainless steel. Wear 426-427, pages 1691-1701.
Crossref
Crossref
Potta Sivaiah & D. Chakradhar. (2019) Performance improvement of cryogenic turning process during machining of 17-4 PH stainless steel using multi objective optimization techniques. Measurement 136, pages 326-336.
Crossref
Crossref
Conglin Dong, Chengqing Yuan, Aijie Xu, Xiuqin Bai & Yu Tian. (2019) Rippled Polymer Surface Generated by Stick–Slip Friction. Langmuir 35:7, pages 2878-2884.
Crossref
Crossref
Alborz Shokrani & Stephen Newman. (2019) A New Cutting Tool Design for Cryogenic Machining of Ti–6Al–4V Titanium Alloy. Materials 12:3, pages 477.
Crossref
Crossref
Sinan Kesriklioglu & Frank E. Pfefferkorn. (2019) Prediction of Tool-Chip Interface Temperature in Cryogenic Machining of Ti–6Al–4V: Analytical Modeling and Sensitivity Analysis. Journal of Thermal Science and Engineering Applications 11:1.
Crossref
Crossref
James Wamai Mwangi, Linh T. Nguyen, Viet D. Bui, Thomas Berger, Henning Zeidler & Andreas Schubert. (2019) Nitinol manufacturing and micromachining: A review of processes and their suitability in processing medical-grade nitinol. Journal of Manufacturing Processes 38, pages 355-369.
Crossref
Crossref
Marcjanna Maria Gawlik, Björn Wiese, Alexander Welle, Jorge González, Valérie Desharnais, Jochen Harmuth, Thomas Ebel & Regine Willumeit-Römer. (2019) Acetic Acid Etching of Mg-xGd Alloys. Metals 9:2, pages 117.
Crossref
Crossref
Sachin B, Narendranath S & D Chakradhar. (2019) Sustainable diamond burnishing of 17-4 PH stainless steel for enhanced surface integrity and product performance by using a novel modified tool. Materials Research Express 6:4, pages 046501.
Crossref
Crossref
Mohd Danish, Turnad Lenggo Ginta, Ahmad Majdi Abdul Rani, Diego Carou, J.P. Davim, Saeed Rubaiee & Sami Ghazali. (2019) Investigation of surface integrity induced on AZ31C magnesium alloy turned under cryogenic and dry conditions. Procedia Manufacturing 41, pages 476-483.
Crossref
Crossref
Soham Deshpande & Yogesh Deshpande. (2019) A Review On Cooling Systems Used In Machining Processes. Materials Today: Proceedings 18, pages 5019-5031.
Crossref
Crossref
S. Vignesh & U. Mohammed Iqbal. 2019. Advances in Forming, Machining and Automation. Advances in Forming, Machining and Automation
253
267
.
M. Pradeep Kumar, M. Jebaraj & G. Mujibar Rahman. 2019. Manufacturing Engineering. Manufacturing Engineering
35
47
.
G Varga, S Ravai-Nagy & F Szigeti. (2018) Examination of surface roughness of holes of plastic parts drilled under cryogenic cooling conditions. IOP Conference Series: Materials Science and Engineering 448, pages 012065.
Crossref
Crossref
Asit Kumar Parida & Kalipada Maity. (2018) Numerical analysis of chip geometry on hot machining of nickel base alloy. Journal of the Brazilian Society of Mechanical Sciences and Engineering 40:10.
Crossref
Crossref
Mohsen Marani, Victor Songmene, Jules Kouam & Yasser Zedan. (2018) Experimental investigation on microstructure, mechanical properties and dust emission when milling Al-20Mg2Si-2Cu metal matrix composite with modifier elements. The International Journal of Advanced Manufacturing Technology 99:1-4, pages 789-802.
Crossref
Crossref
Necati Uçak & Adem Çiçek. (2018) Inconel 718 süperalaşımının delinmesinde kriyojenik soğutmanın delme performansı üzerine etkilerinin araştırılması. Gazi Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi 2018:18-2.
Crossref
Crossref
Alborz Shokrani, Vimal Dhokia & Stephen T Newman. (2016) Energy conscious cryogenic machining of Ti-6Al-4V titanium alloy. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 232:10, pages 1690-1706.
Crossref
Crossref
Yusuf Kaynak & Armin Gharibi. (2018) Progressive Tool Wear in Cryogenic Machining: The Effect of Liquid Nitrogen and Carbon Dioxide. Journal of Manufacturing and Materials Processing 2:2, pages 31.
Crossref
Crossref
P. Sivaiah & D. Chakradhar. (2018) Effect of cryogenic coolant on turning performance characteristics during machining of 17-4 PH stainless steel: A comparison with MQL, wet, dry machining. CIRP Journal of Manufacturing Science and Technology 21, pages 86-96.
Crossref
Crossref
Yusuf KAYNAK & Armin Gharibi. (2018) Sıvı azot ve karbondioksit kriyojenik soğutucuların sertleştirilmiş çelik malzemenin talaşlı imalat performansına etkisi. Gazi Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi 2018:2018.
Crossref
Crossref
Lukman N. Abdulkadir, Khaled Abou-El-Hossein, Abubakar I. Jumare, Peter B. Odedeyi, Muhammad M. Liman & Tirimisiyu A. Olaniyan. (2018) Ultra-precision diamond turning of optical silicon—a review. The International Journal of Advanced Manufacturing Technology 96:1-4, pages 173-208.
Crossref
Crossref
Amin Bagherzadeh & Erhan Budak. (2018) Investigation of machinability in turning of difficult-to-cut materials using a new cryogenic cooling approach. Tribology International 119, pages 510-520.
Crossref
Crossref
P. SIVAIAH, P. MALLIKARJUNA, B. UMA & CHALAPATHI K. VENKATA. (2018) OPTIMIZATION OF ENVIRONMENTAL FRIENDLY TURNING PROCESS
USING TAGUCHI INTEGRATED GREY RELATIONAL ANALYSIS
DURING MACHINING OF 17-4 PH STAINLESS STEEL. i-manager's Journal on Mechanical Engineering 8:4, pages 8.
Crossref
Crossref
A R Natasha, J A Ghani, C H Che Haron & J Syarif. (2018) The influence of machining condition and cutting tool wear on surface roughness of AISI 4340 steel. IOP Conference Series: Materials Science and Engineering 290, pages 012017.
Crossref
Crossref
Alborz Shokrani & Stephen T Newman. (2018) Hybrid cooling and lubricating technology for CNC milling of Inconel 718 nickel alloy. Procedia CIRP 77, pages 215-218.
Crossref
Crossref
Simon Isakson, M. Ibrahim Sadik, Amir Malakizadi & Peter Krajnik. (2018) Effect of cryogenic cooling and tool wear on surface integrity of turned Ti-6Al-4V. Procedia CIRP 71, pages 254-259.
Crossref
Crossref
Wojciech Stachurski, Jacek Sawicki, Ryszard Wójcik & Krzysztof Nadolny. (2018) Influence of application of hybrid MQL-CCA method of applying coolant during hob cutter sharpening on cutting blade surface condition. Journal of Cleaner Production 171, pages 892-910.
Crossref
Crossref
Welber Vasconcelos Leadebal Jr, Anderson Clayton Alves de Melo, Adilson José de Oliveira & Nicolau Apoena Castro. (2018) Effects of cryogenic cooling on the surface integrity in hard turning of AISI D6 steel. Journal of the Brazilian Society of Mechanical Sciences and Engineering 40:1.
Crossref
Crossref
Kapil Gupta & Rudolph F Laubscher. (2016) Sustainable machining of titanium alloys: A critical review. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 231:14, pages 2543-2560.
Crossref
Crossref
Mozammel Mia. (2017) Multi-response optimization of end milling parameters under through-tool cryogenic cooling condition. Measurement 111, pages 134-145.
Crossref
Crossref
Julius Schoop, Wisley Falco Sales & I.S. Jawahir. (2017) High speed cryogenic finish machining of Ti - 6Al4V with polycrystalline diamond tools. Journal of Materials Processing Technology 250, pages 1-8.
Crossref
Crossref
Bikash Chandra Behera, Habtamu Alemayehu, Sudarsan Ghosh & P. Venkateswara Rao. (2017) A comparative study of recent lubri-coolant strategies for turning of Ni-based superalloy. Journal of Manufacturing Processes 30, pages 541-552.
Crossref
Crossref
Rosemar B. Da Silva, Wisley F. Sales, Eder S. Costa, Emmanuel O. Ezugwu, John Bonney, Márcio B. Da Silva & Álisson R. Machado. (2017) Surface integrity and tool life when turning of Ti-6Al-4V with coolant applied by different methods. The International Journal of Advanced Manufacturing Technology 93:5-8, pages 1893-1902.
Crossref
Crossref
Michael Miranda Giraldo, David Alfonso Serje, Jovanny Alejandro Pacheco Bolívar & Jorge Luis Bris Cabrera. (2017) Burr formation and control for polymers micro-milling: A case study with vortex tube cooling. DYNA 84:203, pages 150-159.
Crossref
Crossref
B. Boswell, M.N. Islam, Ian J. Davies, Y. R. Ginting & Ai Keem Ong. (2017) A review identifying the effectiveness of minimum quantity lubrication (MQL) during conventional machining. The International Journal of Advanced Manufacturing Technology 92:1-4, pages 321-340.
Crossref
Crossref
Nikolaos Tapoglou, Maureen I. Aceves Lopez, Ian Cook & Christopher M. Taylor. (2017) Investigation of the Influence of CO 2 Cryogenic Coolant Application on Tool Wear. Procedia CIRP 63, pages 745-749.
Crossref
Crossref
Kyung-Hee Park, Mohd Azlan Suhaimi, Gi-Dong Yang, Dong-Yoon Lee, Seok-Woo Lee & Patrick Kwon. (2017) Milling of titanium alloy with cryogenic cooling and minimum quantity lubrication (MQL). International Journal of Precision Engineering and Manufacturing 18:1, pages 5-14.
Crossref
Crossref
S. Bruschi, G. Tristo, Z. Rysava, P.F. Bariani, D. Umbrello & L. De Chiffre. (2016) Environmentally clean micromilling of electron beam melted Ti6Al4V. Journal of Cleaner Production 133, pages 932-941.
Crossref
Crossref
A. M. M. Sharif Ullah, Takeshi Akamatsu, Masahiro Furuno, M. A. K. Chowdhury & Akihiko Kubo. (2016) Strategies for Developing Milling Tools from the Viewpoint of Sustainable Manufacturing. International Journal of Automation Technology 10:5, pages 727-736.
Crossref
Crossref
N. Yuvaraj & M. Pradeep Kumar. (2016) Cutting of aluminium alloy with abrasive water jet and cryogenic assisted abrasive water jet: A comparative study of the surface integrity approach. Wear 362-363, pages 18-32.
Crossref
Crossref
Paolo C. Priarone, Fritz Klocke, Maria Giulia Faga, Dieter Lung & Luca Settineri. (2015) Tool life and surface integrity when turning titanium aluminides with PCD tools under conventional wet cutting and cryogenic cooling. The International Journal of Advanced Manufacturing Technology 85:1-4, pages 807-816.
Crossref
Crossref
Alborz Shokrani, Vimal Dhokia & Stephen T. Newman. (2016) Cryogenic High Speed Machining of Cobalt Chromium Alloy. Procedia CIRP 46, pages 404-407.
Crossref
Crossref
A. Iturbe, E. Hormaetxe, A. Garay & P.J. Arrazola. (2016) Surface Integrity Analysis when Machining Inconel 718 with Conventional and Cryogenic Cooling. Procedia CIRP 45, pages 67-70.
Crossref
Crossref
Alborz Shokrani, Vimal Dhokia & Stephen T. Newman. (2016) Investigation of the effects of cryogenic machining on surface integrity in CNC end milling of Ti–6Al–4V titanium alloy. Journal of Manufacturing Processes 21, pages 172-179.
Crossref
Crossref
I.S. Jawahir, H. Attia, D. Biermann, J. Duflou, F. Klocke, D. Meyer, S.T. Newman, F. Pusavec, M. Putz, J. Rech, V. Schulze & D. Umbrello. (2016) Cryogenic manufacturing processes. CIRP Annals 65:2, pages 713-736.
Crossref
Crossref
T. Xia, Y. Kaynak, C. Arvin & I. S. Jawahir. (2015) Cryogenic cooling-induced process performance and surface integrity in drilling CFRP composite material. The International Journal of Advanced Manufacturing Technology 82:1-4, pages 605-616.
Crossref
Crossref
Bogdan Alexandru Chirita & Nicolae Catalin Tampu. (2015) The Impact of Cooling System on Surface Quality in Milling. Applied Mechanics and Materials 809-810, pages 135-140.
Crossref
Crossref
Stefano Sartori, Alberto Bordin, Stefania Bruschi & Andrea Ghiotti. (2015) Machinability of the EBM Ti6Al4V in Cryogenic Turning. Key Engineering Materials 651-653, pages 1183-1188.
Crossref
Crossref
Y. Kaynak, S.W. Robertson, H.E. Karaca & I.S. Jawahir. (2015) Progressive tool-wear in machining of room-temperature austenitic NiTi alloys: The influence of cooling/lubricating, melting, and heat treatment conditions. Journal of Materials Processing Technology 215, pages 95-104.
Crossref
Crossref
Rachid M'Saoubi(1)(1), Dragos Axinte(1)(1), Sein Leung Soo(2)(2), Christoph Nobel, Helmi Attia(1)(1), Gregor Kappmeyer(3)(3), Serafettin Engin(3)(3) & Wei-Ming Sim. (2015) High performance cutting of advanced aerospace alloys and composite materials. CIRP Annals 64:2, pages 557-580.
Crossref
Crossref
I.S. Jawahir, Y. Kaynak & T. Lu. (2014) The Impact of Novel Material Processing Methods on Component Quality, Life and Performance. Procedia CIRP 22, pages 33-44.
Crossref
Crossref