Citations (24)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (3)
Subhadip Pradhan, Sudhansu Ranjan Das, Pankaj Charan Jena & Debabrata Dhupal. (2022) Investigations on Surface Integrity in Hard Turning of Functionally Graded Specimen under Nano Fluid Assisted Minimum Quantity Lubrication. Advances in Materials and Processing Technologies 8:sup3, pages 1714-1729.
Read now
Read now
Namit Singh Bhadoria & Gaurav Bartarya. (2022) On the improvement in process performance of ceramic inserts during hard turning in MQL environment. Materials and Manufacturing Processes 37:3, pages 283-293.
Read now
Read now
Rahul Anand, Ankush Raina, Mir Irfan Ul Haq, M. J. Mir, Ovais Gulzar & M. F. Wani. (2021) Synergism of TiO2 and Graphene as Nano-Additives in Bio-Based Cutting Fluid—An Experimental Investigation. Tribology Transactions 64:2, pages 350-366.
Read now
Read now
Articles from other publishers (21)
Havva Demirpolat, Rüstem Binali, Abhishek D. Patange, Sujit S. Pardeshi & Sakthivel Gnanasekaran. (2023) Comparison of Tool Wear, Surface Roughness, Cutting Forces, Tool Tip Temperature, and Chip Shape during Sustainable Turning of Bearing Steel. Materials 16:12, pages 4408.
Crossref
Crossref
Van Canh Nguyen, Thuy Duong Nguyen & Van Thao Le. (2022) Optimization of sustainable milling of SKD11 steel under minimum quantity lubrication. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering 237:3, pages 907-916.
Crossref
Crossref
Saswat Khatai, Ashok Kumar Sahoo, Ramanuj Kumar & Amlana Panda. (2023) Recent research progress on various cooling and lubrication techniques used in sustainable hard machining: A comprehensive review. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, pages 095440892311696.
Crossref
Crossref
Nimel Sworna Ross, M. Ganesh, M. Belsam Jeba Ananth, M. Kumar, Ritu Rai, Munish Kumar Gupta & Mehmet Erdi Korkmaz. (2023) Development and potential use of MWCNT suspended in vegetable oil as a cutting fluid in machining of Monel 400. Journal of Molecular Liquids, pages 121853.
Crossref
Crossref
A. Mystica & V. S. Senthil Kumar. (2023) Microstructure and mechanical properties of friction stir welded AA2014 alloy under n-MQL最小量润滑下搅拌摩擦焊接AA2014 合金的组织与力学性能. Journal of Central South University 30:4, pages 1047-1063.
Crossref
Crossref
Sitesh Mahapatra, Anshuman Das, Pankaj Charan Jena & Sudhansu Ranjan Das. (2022) Turning of hardened AISI H13 steel with recently developed S3P-AlTiSiN coated carbide tool using MWCNT mixed nanofluid under minimum quantity lubrication. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 237:4, pages 843-864.
Crossref
Crossref
Smita Padhan, Naresh Kumar Wagri, Lalatendu Dash, Anshuman Das, Sudhansu Ranjan Das, Mohammad Rafighi & Priyaranjan Sharma. (2023) Investigation on Surface Integrity in Hard Turning of AISI 4140 Steel with SPPP-AlTiSiN Coated Carbide Insert under Nano-MQL. Lubricants 11:2, pages 49.
Crossref
Crossref
Saswat Khatai, Ashok Kumar Sahoo, Ramanuj Kumar & Amlana Panda. 2023. Recent Advances in Materials and Manufacturing Technology. Recent Advances in Materials and Manufacturing Technology
961
971
.
A. BALASUADHAKAR, S. THIRUMALAI KUMARAN, RENDI KURNIAWAN & FAROOQ AHMED. (2022) A COMPREHENSIVE REVIEW ON MINIMUM QUANTITY LUBRICATION IN TURNING PROCESS. Surface Review and Letters 29:08.
Crossref
Crossref
Pin Han Yap, Jaharah A. Ghani & Wan Mohd. Faizal Wan Mahmood. (2022) Optimisation on the Performance of Bubble-Bursting Atomisation for Minimum Quantity Lubrication with Vegetable Oil Using Computational Fluid Dynamics Simulation. Materials 15:12, pages 4355.
Crossref
Crossref
Abidin Şahinoğlu, Mohammad Rafighi & Ramanuj Kumar. (2021) An investigation on cutting sound effect on power consumption and surface roughness in CBN tool-assisted hard turning. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering 236:3, pages 1096-1108.
Crossref
Crossref
V. V. Kalyan Chakravarthy, T. Rajmohan, D. Vijayan & K. Palanikumar. (2021) Sustainable Drilling of Nano SiC Reinforced Al Matrix Composites Using MQL and Cryogenic Cooling for Achieving the Better Surface Integrity. Silicon 14:4, pages 1787-1805.
Crossref
Crossref
Vineet Dubey, Anuj Kumar Sharma, Prameet Vats, Danil Yurievich Pimenov, Khaled Giasin & Daniel Chuchala. (2021) Study of a Multicriterion Decision-Making Approach to the MQL Turning of AISI 304 Steel Using Hybrid Nanocutting Fluid. Materials 14:23, pages 7207.
Crossref
Crossref
Mehmet Erdi Korkmaz, Munish Kumar Gupta, Grzegorz M. Krolczyk, Radoslaw W. Maruda & Zhixiong Li. (2021) Effect of nanoparticles as a lubricants in nano-MQL machining of metallic materials: A review. Effect of nanoparticles as a lubricants in nano-MQL machining of metallic materials: A review.
Hassan Javid, Mirza Jahanzaib, Muhammad Jawad, Muhammad Asad Ali, Muhammad Umar Farooq, Catalin I. Pruncu & Salman Hussain. (2021) Parametric analysis of turning HSLA steel under minimum quantity lubrication (MQL) and nanofluids-based minimum quantity lubrication (NF-MQL): a concept of one-step sustainable machining. The International Journal of Advanced Manufacturing Technology 117:5-6, pages 1915-1934.
Crossref
Crossref
Syed Muhammad Raza, Aqib Mashood Khan, Muhammad Umar Farooq, Asif Iqbal, Danil Yurievich Pimenov, Khaled Giasin & Kamil Leksycki. (2021) Modelling and Analysis of Surface Evolution on Turning of Hard-to-Cut CLARM 30NiCrMoV14 Steel Alloy. Metals 11:11, pages 1751.
Crossref
Crossref
Johnson Olumuyiwa Agunsoye, Clifford Ugochukwu Nwoji & Victor Sunday Aigbodion. (2021) Machining performance of oil-based SiO2-derived rice husk ash nanofluid for the machining of aluminum alloy. The International Journal of Advanced Manufacturing Technology 116:3-4, pages 1285-1295.
Crossref
Crossref
Ammar H. Elsheikh, Mohamed Abd Elaziz, Sudhansu Ranjan Das, T. Muthuramalingam & Songfeng Lu. (2021) A new optimized predictive model based on political optimizer for eco-friendly MQL-turning of AISI 4340 alloy with nano-lubricants. Journal of Manufacturing Processes 67, pages 562-578.
Crossref
Crossref
Lalatendu Dash, Smita Padhan, Anshuman Das & Sudhansu Ranjan Das. (2021) Machinability investigation and sustainability assessment in hard turning of AISI D3 steel with coated carbide tool under nanofluid minimum quantity lubrication-cooling condition. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, pages 095440622199384.
Crossref
Crossref
Smita Padhan, Anshuman Das, Aniket Santoshwar, Thakkar Raj Dharmendrabhai & Sudhansu Ranjan Das. (2020) Sustainability Assessment and Machinability Investigation of Austenitic Stainless Steel in Finish Turning with Advanced Ultra-Hard SiAlON Ceramic Tool under Different Cutting Environments. Silicon 13:1, pages 119-147.
Crossref
Crossref
Fatih Günan, Turgay Kıvak, Çağrı Vakkas Yıldırım & Murat Sarıkaya. (2020) Performance evaluation of MQL with AL2O3 mixed nanofluids prepared at different concentrations in milling of Hastelloy C276 alloy. Journal of Materials Research and Technology 9:5, pages 10386-10400.
Crossref
Crossref