Advanced search
Publication Cover
Science and Technology of Welding and Joining Volume 21, 2016 - Issue 7
Journal homepage
465
Views
13
CrossRef citations to date
0
Altmetric
Research Papers

Gas metal arc brazing of galvannealed steel sheets

P. MakwanaIndian Institute of Technology Bombay, Mumbai, Maharashtra, India
,
M. ShomeTata Steel Ltd., Jamshedpur, Jharkhand, India
,
Sven-F. GoeckeTechnical University of Applied Science, Brandenburg an der Havel, Germany
&
A. DeIndian Institute of Technology Bombay, Mumbai, Maharashtra, IndiaCorrespondence[email protected]
Pages 600-606 | Received 23 Nov 2015, Accepted 15 Jan 2016, Published online: 18 May 2016

Citations (13)

Keep up to date with the latest research on this topic with citation updates for this article.

Subscribe to citation updates

Read on this site (3)

Gaurav Nandan, Kanwer S. Arora, Jaivindra Singh & Ashok Kumar. (2023) Influence of process parameters on bead geometry and its effect on mechanical properties of CMT welding of automotive grade steel and aluminium alloy using aluminium based filler wire. Welding International 37:9, pages 493-506.
Read now
Nikhil Shajan, Kanwer Singh Arora, Mahadev Shome, Parminder Singh & V. Santhanagopalan. (2021) Effect of boron in suppressing the liquid metal embrittlement in drawable grade of steel. Science and Technology of Welding and Joining 26:2, pages 130-135.
Read now
P. Makwana, M. Shome, S.-F. Goecke & A. De. (2017) Wetting length in gas metal arc brazing of galvanised steel. Science and Technology of Welding and Joining 22:2, pages 166-169.
Read now

Articles from other publishers (10)

Shadab Sarmast-Ghahfarokhi, Abdelbaset R.H. Midawi, Vladimir Yasnogorodski, Michael J. Benoit & Y. Norman Zhou. (2023) Improvement of the mechanical performance of ZnAlMg coated steel brazed joints through precipitation-based strengthening. Materials Science and Engineering: A, pages 145657.
Crossref
Divya Nalajala, Rama Kishore Mookara & Murugaiyan Amirthalingam. (2021) Gas metal arc brazing behaviour of a galvanised advanced high strength steel in short circuiting and short circuiting with pulsing modes. Welding in the World 66:1, pages 69-80.
Crossref
M. Shehryar Khan, Y.-H. Cho, M. Alfano, F. Goodwin, E. Biro & Y. Zhou. (2021) A systematic study on the effect of coating type and surface preparation on the wettability of Si-Bronze brazing filler material on GI and GA-coated DP600. Surface and Coatings Technology 425, pages 127735.
Crossref
Jaivindra Singh, Kanwer Singh Arora, Nikhil Shajan, Mahadev Shome & Dinesh Kumar Shukla. (2021) Influence of Novel Torch Type on Mechanical and Microstructural Characteristics of Cold Metal Transfer Brazed Joints. Journal of Manufacturing Science and Engineering 143:1.
Crossref
César Marconi, Carlos Consigli, María José Castillo & Hernán Svoboda. (2020) Efecto de los Parámetros de Proceso sobre las Propiedades Mecánicas de Uniones GMAW-Brazing de Acero DP 1000. Soldagem & Inspeção 25.
Crossref
Jaivindra Singh, Kanwer Singh Arora, Nikhil Shajan, Mahadev Shome & Dinesh Kumar Shukla. (2019) Influence of filler wire composition and heat input on microstructure and strength of CMT brazed DP steel joints. Materials Research Express 6:11, pages 116551.
Crossref
Jaivindra Singh, Kanwer Singh Arora, Nikhil Shajan, Dinesh Kumar Shukla & Mahadev Shome. (2019) Role of bead shape and dispersed intermetallic phases in determining the strength of CMT brazed DP780 lap joints. Journal of Manufacturing Processes 44, pages 207-215.
Crossref
P. Makwana, M. Shome, Sven-F Goecke & A. De. (2018) Fast responsive control of current and voltage waveforms for gas metal arc brazing of thin zinc-coated steel sheets. Journal of Materials Processing Technology 254, pages 171-178.
Crossref
Gang Mou, Xueming Hua, Dongsheng Wu, Yuelong Zhang, Daming Wang & Weidong Chu. (2017) Study on weld seam surface deposits of CuSi3 CMT brazing. The International Journal of Advanced Manufacturing Technology 92:5-8, pages 2735-2742.
Crossref
A. Das, M. Shome, Sven-F. Goecke & A. De. (2017) Joining of aluminium alloy and galvanized steel using a controlled gas metal arc process. Journal of Manufacturing Processes 27, pages 179-187.
Crossref

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.