Gas metal arc brazing of galvannealed steel sheets

References

• A. R. Marder: ‘The metallurgy of zinc-coated steel’, Prog. Mater Sci., 2000, 45, 191–271. doi: 10.1016/S0079-6425(98)00006-1
   Web of Science ®Google Scholar
• C. A. Campos, M. P. Guerrero-mata, R. Colás and R. Garza: ‘Weldability of galvannealed interstitial free steel’, ISIJ Int., 2002, 42, (8), 876–881. doi: 10.2355/isijinternational.42.876
   Web of Science ®Google Scholar
• A. De, L. Dorn and O. P. Gupta: ‘Analysis and optimisation of electrode life for conventional and compound tip electrodes during resistance spot welding of electrogalvanised steels’, Sci. Technol. Weld. Joining, 2000, 5, (1), 49–57. doi: 10.1179/stw.2000.5.1.49
   Web of Science ®Google Scholar
• X. Hu, G. Zou, S. J. Dong, M. Y. Lee, J. P. Jung and Y. Zhou: ‘Effects of steel coatings on electrode life in resistance spot welding of galvannealed steel sheets’, Mater. Trans., 2010, 51, (12), 2236–2242. doi: 10.2320/matertrans.M2010239
   Web of Science ®Google Scholar
• M. Kondo, T. Konishi, K. Nomura and H. Kokawa: ‘Degradation mechanism of electrode tip during alternate resistance spot welding of zinc coated and uncoated steel sheets’, Sci. Technol. Weld. Joining, 2010, 15, (1), 76–80. doi: 10.1179/136217109X12577814486656
   Web of Science ®Google Scholar
• J. Nieto, M. P. Guerrero-Mata, R. Colas and A. Mani: ‘Experimental investigation on resistance spot welding of galvannealed HSLA steel’, Sci. Technol. Weld. Joining, 2006, 11, (6), 717–722. doi: 10.1179/174329306X153187
   Web of Science ®Google Scholar
• S. Basak, T. K. Pal, M. Shome and J. Maity: ‘GMA brazing of galvannealed interstitial-free steel’, Weld. J., 2013, 92, 29s–35s.
   Web of Science ®Google Scholar
• D. Iordachescu, L. Quintino, R. Miranda and G. Pimenta: ‘Influence of shielding gases and process parameters on metal transfer and bead shape in MIG brazed joints of the thin zinc coated steel plates’, Mater. Des., 2006, 27, 381–390. doi: 10.1016/j.matdes.2004.11.010
   Web of Science ®Google Scholar
• K. P. Yagati, R. N. Bathe, K. V. Raajulapati, K. B. S. Rao and G. Padmanabham: ‘Fluxless arc weld-brazing of aluminium alloy to steel’, J. Mater. Process. Technol., 2014, 214, 2949–2959. doi: 10.1016/j.jmatprotec.2014.06.017
   Web of Science ®Google Scholar
• J. Frostevarg, A. F. H. Kaplan and J. Lamas: ‘Comparison of CMT with other arc modes for laser-arc hybrid welding of steel’, Weld World, 2014, 58, 649–660. doi: 10.1007/s40194-014-0146-7
   Web of Science ®Google Scholar
• M. Kai, Y. Zhishui, Z. Peilei, L. Yunlong, Y. Hua and L. Chonggui: ‘Influence of wire feeding speed on laser brazing zinc-coated steel with Cu-based filler metal’, Int. J. Adv. Manuf. Technol., 2015, 76, 1333–1342. doi: 10.1007/s00170-014-6347-9
   Web of Science ®Google Scholar
• C. Mittelstädt, T. Seefeld, D. Reitemeyer and F. Vollertsen: ‘Two-beam laser brazing of thin sheet steel for automotive industry using Cu-base filler material’, Physics Procedia, 2014, 56, 699–708. doi: 10.1016/j.phpro.2014.08.077
   Google Scholar
• F. Varol, E. Ferik, U. Ozsarac and S. Aslanlar: ‘Influence of current intensity and heat input in Metal Inert Gas-brazed joints of TRIP 800 thin zinc coated steel plates’, Mater. Des., 2013, 52, 1099–1105. doi: 10.1016/j.matdes.2013.06.054
   Web of Science ®Google Scholar
• S. F. Goecke, A. A. Syed, M. E. Spiegel and A. De: ‘Probing current, voltage and metal transfer characteristics in pulsed arc and in conventional and a novel low energy input short arc GMAW’, Quart. J. Jpn. Weld. Soc, 2013, 31, (4), 26s–30s. doi: 10.2207/qjjws.31.26s
   Google Scholar
• M. E. Spiegel, S. F. Goecke and M. Rethmeier: ‘Possibilities for compensating a higher heat input in particular by the torch offset relative to the top sheet at the fillet weld on a lap joint’, Weld World, 2015, 59, 443–453. doi: 10.1007/s40194-015-0220-9
   Web of Science ®Google Scholar
• Z. S. Yu, R. F. Li, F. M. Zhou, M. F. Wu, K. Qi and Y. Y. Qian: ‘Joint evolution and strengthening mechanisms in arc brazed galvanised steels with Cu97Si3 filler’, Mater. Sci. Technol., 2004, 20, 1479–1483. doi: 10.1179/026708304225022133
   Web of Science ®Google Scholar
• L. Quintino, G. Pimenta, D. Iordachescu, R. M. Miranda and N. V. Pepe: ‘MIG brazing of galvanized thin sheet Joints for automotive industry’, Mater. Manuf. Processes, 2006, 21, 63–73. doi: 10.1081/AMP-200060621
   Web of Science ®Google Scholar
• A. S. Guimaraes, M. T. Mendes, H. R. M. Costa, J. D. S. Mchado and N. K. Kuromoto: ‘An evaluation of the behaviour of a zinc layer on a galvanised sheet joined by MIG brazing’, Weld. Int., 2007, 21, (4), 271–278. doi: 10.1080/09507110701411908
   Google Scholar
• R. Cao, G. Yu, J. H. Chen and P. C. Wang: ‘Cold metal transfer joining aluminum alloys-to-galvanized mild steel’, J. Mater. Process. Technol., 2013, 213, 1753–1763. doi: 10.1016/j.jmatprotec.2013.04.004
   Web of Science ®Google Scholar
• A. Das, M. Shome, C. R. Das, S. F. Goecke and A. De: ‘Joining of galvannealed steel and aluminium alloy using controlled short circuiting gas metal arc welding process’, Sci. Technol. Weld. Joining, 2015, 20, (5), 402–408. doi: 10.1179/1362171815Y.0000000032
   Web of Science ®Google Scholar
• S. L. Yang and R. Kovacevic: ‘Welding of galvanized Dual-Phase 980 steel in a gap-free lap joint configuration’, Weld. J., 2009, 88, 168s–178s.
   Web of Science ®Google Scholar
• Y. Su, X. Hua and Y. Wu: ‘Quantitative characterization of porosity in Fe–Al dissimilar materials lap joint made by gas metal arc welding with different current modes’, J. Mater. Process. Technol., 2014, 214, 81–86. doi: 10.1016/j.jmatprotec.2013.08.002
   Web of Science ®Google Scholar
• R. Li, Z. Yu and K. Qi: ‘Numerical simulation and analysis of flow field in TIG arc brazed filler metal droplet’, Mater. Sci. Forum, 2008, 575–578, 716–721. doi: 10.4028/www.scientific.net/MSF.575-578.716
   Google Scholar
• H. Mehrer, M. Eggersmann, A. Gude, M. Salamon and B. Sepiol: ‘Diffusion in intermetallic phases of the Fe-Al and Fe-Si systems’, Mater. Sci. Eng. A, 1997, 239–240, 889–898. doi: 10.1016/S0921-5093(97)00680-1
   Web of Science ®Google Scholar
• BS EN 12797:2000: ‘Brazing – Destructive tests of brazed joints’, 15–16; 2004, London, British Standard.
   Google Scholar
• N. Pepe, S. Egerland, P. A. Colegrove, D. Yapp, A. Leonhartsberger and A. Scotti: ‘Measuring the process efficiency of controlled gas metal arc welding processes’, Sci. Technol. Weld. Joining, 2011, 16, (5), 412–417. doi: 10.1179/1362171810Y.0000000029
   Web of Science ®Google Scholar
• C. A. Klepser: ‘Growth of intermetallic phases at low temperature’, DSc Thesis, Massachusetts Institute of Technology, Cambridge, MA, USA, 1996, 23–24.
   Google Scholar
• H. Bakker, H. P. Bonzel, C. M. Bruff, M. A. Dayananda, W. Gust, J. Horvath, I. Kaur, G. V. Kidson, A. D. Le Claire, H. Mehrer, G. E. Murch, G. Neumann, N. Stolica and N. A. Stolwijk: ‘Diffusion in solid metals and alloys’, 1st edn, 137–138; 1990, Germany, Springer.
   Google Scholar
• O. Grong: ‘Metallurgical modelling of welding’, 2nd edn, 45–54; 1997, London, The Institute of Materials.
   Google Scholar
• Z. Yu, R. Li and K. Qi: ‘Growth behavior of interfacial compounds in galvanized steel joints with CuSi3 filler under arc brazing’, Trans. Nonferrous Met. Soc. China, 2006, 16, 1391–1396. doi: 10.1016/S1003-6326(07)60026-0
   Web of Science ®Google Scholar
• V. Milekhine, M. I. Onsøien, J. K. Solberg and T. Skaland: ‘Mechanical properties of FeSi (ε), FeSi2 (ζα) and Mg2Si’, Intermetallics, 2002, 10, 743–750. doi: 10.1016/S0966-9795(02)00046-8
   Web of Science ®Google Scholar
• H. J. Saxton, A. J. West and C. R. Barrett: ‘Deformation and failure of brazed joints—macroscopic considerations’, Metall. Trans., 1971, 2, (4), 999–1007. doi: 10.1007/BF02664231
   Web of Science ®Google Scholar
• J. Hu and H. L. Tsai: ‘Heat and mass transfer in gas metal arc welding. Part I: The arc’, Int. J. Heat Mass Transfer, 2007, 50, 833–846. doi: 10.1016/j.ijheatmasstransfer.2006.08.025
   Web of Science ®Google Scholar
• W. F. Gale and T. C. Totemeier: ‘Smithells metals reference book’, 8th edn, 10–3; 2004, Oxford, Elsevier.
   Google Scholar